The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Полнотекстовый поиск и индексация больших блоков текста в MySQL (mysql text search sql)

<< Предыдущая ИНДЕКС Поиск в статьях src Установить закладку Перейти на закладку Следующая >>
Ключевые слова: mysql, text, search, sql,  (найти похожие документы)
Date: Fri, 05 Jul 2002 12:50:35 +0600 From: Nickolay Kondrashov <> Newsgroups: Subject: Полнотекстовый поиск и индексация больших блоков текста в MySQL > А подскажите под каким типом данных лучьше сохранить текст в базу mysql, если > текст больше 300 символов ... нужено будет делать поиск в этом тексте > (поиск текста как подстроки в строке ... ) тип TEXT. до 64К. Кстати, в mysql есть полнотекстовый поиск (см. индекс FULLTEXT). 25.2 MySQL Full-text Search Since Version 3.23.23, MySQL has support for full-text indexing and searching. Full-text indexes in MySQL are an index of type FULLTEXT. FULLTEXT indexes can be created from VARCHAR and TEXT columns at CREATE TABLE time or added later with ALTER TABLE or CREATE INDEX. For large datasets, adding FULLTEXT index with ALTER TABLE (or CREATE INDEX) would be much faster than inserting rows into the empty table with a FULLTEXT index. Full-text search is performed with the MATCH function. mysql> CREATE TABLE t (a VARCHAR(200), b TEXT, FULLTEXT (a,b)); Query OK, 0 rows affected (0.00 sec) mysql> INSERT INTO t VALUES -> ('MySQL has now support', 'for full-text search'), -> ('Full-text indexes', 'are called collections'), -> ('Only MyISAM tables','support collections'), -> ('Function MATCH ... AGAINST()','is used to do a search'), -> ('Full-text search in MySQL', 'implements vector space model'); Query OK, 5 rows affected (0.00 sec) Records: 5 Duplicates: 0 Warnings: 0 mysql> SELECT * FROM t WHERE MATCH (a,b) AGAINST ('MySQL'); +---------------------------+-------------------------------+ | a | b | +---------------------------+-------------------------------+ | MySQL has now support | for full-text search | | Full-text search in MySQL | implements vector-space-model | +---------------------------+-------------------------------+ 2 rows in set (0.00 sec) mysql> SELECT *,MATCH a,b AGAINST ('collections support') as x FROM t; +------------------------------+-------------------------------+--------+ | a | b | x | +------------------------------+-------------------------------+--------+ | MySQL has now support | for full-text search | 0.3834 | | Full-text indexes | are called collections | 0.3834 | | Only MyISAM tables | support collections | 0.7668 | | Function MATCH ... AGAINST() | is used to do a search | 0 | | Full-text search in MySQL | implements vector space model | 0 | +------------------------------+-------------------------------+--------+ 5 rows in set (0.00 sec) The function MATCH matches a natural language query AGAINST a text collection (which is simply the columns that are covered by a FULLTEXT index). For every row in a table it returns relevance - a similarity measure between the text in that row (in the columns that are part of the collection) and the query. When it is used in a WHERE clause (see example above) the rows returned are automatically sorted with relevance decreasing. Relevance is a non-negative floating-point number. Zero relevance means no similarity. Relevance is computed based on the number of words in the row, the number of unique words in that row, the total number of words in the collection, and the number of documents (rows) that contain a particular word. MySQL uses a very simple parser to split text into words. A ``word'' is any sequence of letters, numbers, `'', and `_'. Any ``word'' that is present in the stopword list or just too short (3 characters or less) is ignored. Every correct word in the collection and in the query is weighted, according to its significance in the query or collection. This way, a word that is present in many documents will have lower weight (and may even have a zero weight), because it has lower semantic value in this particular collection. Otherwise, if the word is rare, it will receive a higher weight. The weights of the words are then combined to compute the relevance of the row. Such a technique works best with large collections (in fact, it was carefully tuned this way). For very small tables, word distribution does not reflect adequately their semantical value, and this model may sometimes produce bizarre results. For example, search for the word "search" will produce no results in the above example. Word "search" is present in more than half of rows, and as such, is effectively treated as a stopword (that is, with semantical value zero). It is, really, the desired behavior - a natural language query should not return every other row in 1GB table. A word that matches half of rows in a table is less likely to locate relevant documents. In fact, it will most likely find plenty of irrelevant documents. We all know this happens far too often when we are trying to find something on the Internet with a search engine. It is with this reasoning that such rows have been assigned a low semantical value in a particular dataset. 25.2.1 Fine-tuning MySQL Full-text Search Unfortunately, full-text search has no user-tunable parameters yet, although adding some is very high on the TODO. However, if you have a MySQL source distribution (See section 4.7 Installing a MySQL Source Distribution.), you can somewhat alter the full-text search behavior. Note that full-text search was carefully tuned for the best searching effectiveness. Modifying the default behavior will, in most cases, only make the search results worse. Do not alter the MySQL sources unless you know what you are doing! a.. Minimal length of word to be indexed is defined in myisam/ftdefs.h file by the line #define MIN_WORD_LEN 4 Change it to the value you prefer, recompile MySQL, and rebuild your FULLTEXT indexes. b.. The stopword list is defined in myisam/ft_static.c Modify it to your taste, recompile MySQL and rebuild your FULLTEXT indexes. c.. The 50% threshold is caused by the particular weighting scheme chosen. To disable it, change the following line in myisam/ftdefs.h: #define GWS_IN_USE GWS_PROB to #define GWS_IN_USE GWS_FREQ and recompile MySQL. There is no need to rebuild the indexes in this case. 25.2.2 New Features of Full-text Search to Appear in MySQL 4.0 This section includes a list of the fulltext features that are already implemented in the 4.0 tree. It explains More functions for full-text search entry of section H.1 Things that should be in 4.0. a.. REPAIR TABLE with FULLTEXT indexes, ALTER TABLE with FULLTEXT indexes, and OPTIMIZE TABLE with FULLTEXT indexes are now up to 100 times faster. b.. MATCH ... AGAINST now supports the following boolean operators: a.. +word means the that word must be present in every row returned. b.. -word means the that word must not be present in every row returned. c.. < and > can be used to decrease and increase word weight in the query. d.. ~ can be used to assign a negative weight to a noise word. e.. * is a truncation operator. Boolean search utilizes a more simplistic way of calculating the relevance, that does not have a 50% threshold. c.. Searches are now up to 2 times faster due to optimized search algorithm. d.. Utility program ft_dump added for low-level FULLTEXT index operations (querying/dumping/statistics). 25.2.3 Full-text Search TODO a.. Make all operations with FULLTEXT index faster. b.. Support for braces () in boolean fulltext search. c.. Support for "always-index words". They could be any strings the user wants to treat as words, examples are "C++", "AS/400", "TCP/IP", etc. d.. Support for fulltext search in MERGE tables. e.. Support for multi-byte charsets. f.. Make stopword list to depend of the language of the data. g.. Stemming (dependent of the language of the data, of course). h.. Generic user-supplyable UDF (?) preparser. i.. Make the model more flexible (by adding some adjustable parameters to FULLTEXT in CREATE/ALTER TABLE). 25.3 MySQL Test Suite Until recently, our main full-coverage test suite was based on proprietary customer data and for that reason has not been publicly available. The only publicly available part of our testing process consisted of the crash-me test, a Perl DBI/DBD benchmark found in the sql-bench directory, and miscellaneous tests located in tests directory. The lack of a standardized publicly available test suite has made it difficult for our users, as well developers, to do regression tests on the MySQL code. To address this problem, we have created a new test system that is included in the source and binary distributions starting in Version 3.23.29. The test system consist of a test language interpreter (mysqltest), a shell script to run all tests(mysql-test-run), the actual test cases written in a special test language, and their expected results. To run the test suite on your system after a build, type mysql-test/mysql-test-run from the source root. If you have installed a binary distribution, cd to the install root (eg. /usr/local/mysql), and do scripts/mysql-test-run. All tests should succeed. If they do not, use mysqlbug to send a bug report to Make sure to include the output of mysql-test-run, as well as contents of all .reject files in mysql-test/r directory. If you have a copy of mysqld running on the machine where you want to run the test suite you do not have to stop it, as long as it is not using ports 9306 and 9307. If one of those ports is taken, you should edit mysql-test-run and change the values of the master and/or slave port to one that is available. The current set of test cases is far from comprehensive, as we have not yet converted all of our private tests to the new format. However, it should already catch most obvious bugs in the SQL processing code, OS/library issues, and is quite thorough in testing replication. Our eventual goal is to have the tests cover 100% of the code. We welcome contributions to our test suite. You may especially want to contribute tests that examine the functionality critical to your system, as this will ensure that all future MySQL releases will work well with your applications. You can use the mysqltest language to write your own test cases. Unfortunately, we have not yet written full documentation for it - we plan to do this shortly. You can, however, look at our current test cases and use them as an example. The following points should help you get started: a.. The tests are located in mysql-test/t/*.test b.. You can run one individual test case with mysql-test/mysql-test-run test_name removing .test extension from the file name c.. A test case consists of ; terminated statements and is similar to the input of mysql command line client. A statement by default is a query to be sent to MySQL server, unless it is recognized as internal command ( eg. sleep ). d.. All queries that produce results, e.g. SELECT, SHOW, EXPLAIN, etc., must be preceded with @/path/to/result/file. The file must contain the expected results. An easy way to generate the result file is to run mysqltest -r < t/test-case-name.test from mysql-test directory, and then edit the generated result files, if needed, to adjust them to the expected output. In that case, be very careful about not adding or deleting any invisible characters - make sure to only change the text and/or delete lines. If you have to insert a line, make sure the fields are separated with a hard tab, and there is a hard tab at the end. You may want to use od -c to make sure your text editor has not messed anything up during edit. We, of course, hope that you will never have to edit the output of mysqltest -r as you only have to do it when you find a bug. e.. To be consistent with our setup, you should put your result files in mysql-test/r directory and name them test_name.result. If the test produces more than one result, you should use test_name.a.result, test_name.b.result, etc. f.. Failed test results are put in a file with the same base name as the result file with the .reject extension. If your test case is failing, you should do a diff on the two files. If you cannot see how they are different, examine both with od -c and also check their lengths. g.. You can prefix a query with ! if the test can continue after that query returns an error. h.. If you are writing a replication test case, you should on the first line of the test file, put source include/;. To switch between master and slave, use connection master; and connection slave;. If you need to do something on an alternate connection, you can do connection master1; for the master, and connection slave1; for the slave. i.. If you need to do something in a loop, you can use something like this: let $1=1000; while ($1) { # do your queries here dec $1; } j.. To sleep between queries, use the sleep command. It supports fractions of a second, so you can do sleep 1.3;, for example, to sleep 1.3 seconds. k.. To run the slave with additional options for your test case, put them in the command-line format in mysql-test/t/test_name-slave.opt. For the master, put them in mysql-test/t/test_name-master.opt. l.. If you have a question about the test suite, or have a test case to contribute, e-mail to As the list does not accept attachemnts, you should ftp all the relevant files to:

<< Предыдущая ИНДЕКС Поиск в статьях src Установить закладку Перейти на закладку Следующая >>

 Добавить комментарий

Inferno Solutions
Hosting by

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру