forum.opennet.ru

Составление сообщения

Исходное сообщение

"vlan DHCP"
Отправлено lykich99, 21-Апр-08 11:58

>[оверквотинг удален]
>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 14
>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 8
>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 18
>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 7
>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 6
>>No DHCPOFFERS received.
>>No working leases in persistent database - sleepin
>
>что показывает trafshow или tcpdump?
>В Влан3014 заходят ответы от сервера?
Вы пправы sis0 у меня не был up,решил сча подымать его при старте вот сча rc.conf
ifconfig_sis0="192.168.3.5/24"
ifconfig_vlan3014="inet 10.1.14.6 netmask 255.255.255.0 vlan 3014 vlandev sis0"

ws-5# ifconfig
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.3.5 netmask 0xffffff00 broadcast 192.168.3.255
        ether 00:e0:18:26:38:3a
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.2.5 netmask 0xffffff00 broadcast 192.168.2.255
        ether 00:02:44:33:6b:8c
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
pfsync0: flags=0<> mtu 2020
        syncpeer: 224.0.0.240 maxupd: 128
vlan33: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan34: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan3014: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 10.1.14.6 netmask 0xffffff00 broadcast 10.1.14.255
        ether 00:e0:18:26:38:3a
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 3014 parent interface: sis0
вот с таки параметрами загружаюсь потом делаю
ws-5# /sbin/dhclient -c /etc/dhclient.conf vlan3014
DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 15
DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 2
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
паралельно смотрю
ws-5# tcpdump -i vlan3014
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on vlan3014, link-type EN10MB (Ethernet), capture size 96 bytes
09:54:32.577478 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300
09:54:37.578498 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300
09:54:51.577653 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300
09:55:06.576677 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300
09:55:21.575710 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300
09:55:31.575396 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300
в итоге имею вот ето
ws-5# ifconfig
sis0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.3.5 netmask 0xffffff00 broadcast 192.168.3.255
        ether 00:e0:18:26:38:3a
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet 192.168.2.5 netmask 0xffffff00 broadcast 192.168.2.255
        ether 00:02:44:33:6b:8c
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
pfsync0: flags=0<> mtu 2020
        syncpeer: 224.0.0.240 maxupd: 128
vlan33: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan34: flags=8002<BROADCAST,MULTICAST> mtu 1500
        ether 00:00:00:00:00:00
        vlan: 0 parent interface: <none>
vlan3014: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        ether 00:e0:18:26:38:3a
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        vlan: 3014 parent interface: sis0
Вроде бы все правильно но не рулит , в чем же дело?

Исходное сообщение
"vlan DHCP" Отправлено lykich99, 21-Апр-08 11:58
>[оверквотинг удален] >>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 14 >>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 8 >>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 18 >>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 7 >>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 6 >>No DHCPOFFERS received. >>No working leases in persistent database - sleepin > >что показывает trafshow или tcpdump? >В Влан3014 заходят ответы от сервера? Вы пправы sis0 у меня не был up,решил сча подымать его при старте вот сча rc.conf ifconfig_sis0="192.168.3.5/24" ifconfig_vlan3014="inet 10.1.14.6 netmask 255.255.255.0 vlan 3014 vlandev sis0" ws-5# ifconfig sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.3.5 netmask 0xffffff00 broadcast 192.168.3.255 ether 00:e0:18:26:38:3a media: Ethernet autoselect (100baseTX <full-duplex>) status: active rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.2.5 netmask 0xffffff00 broadcast 192.168.2.255 ether 00:02:44:33:6b:8c media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pfsync0: flags=0<> mtu 2020 syncpeer: 224.0.0.240 maxupd: 128 vlan33: flags=8002<BROADCAST,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 vlan: 0 parent interface: <none> vlan34: flags=8002<BROADCAST,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 vlan: 0 parent interface: <none> vlan3014: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.1.14.6 netmask 0xffffff00 broadcast 10.1.14.255 ether 00:e0:18:26:38:3a media: Ethernet autoselect (100baseTX <full-duplex>) status: active vlan: 3014 parent interface: sis0 вот с таки параметрами загружаюсь потом делаю ws-5# /sbin/dhclient -c /etc/dhclient.conf vlan3014 DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 2 No DHCPOFFERS received. No working leases in persistent database - sleeping. паралельно смотрю ws-5# tcpdump -i vlan3014 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vlan3014, link-type EN10MB (Ethernet), capture size 96 bytes 09:54:32.577478 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300 09:54:37.578498 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300 09:54:51.577653 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300 09:55:06.576677 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300 09:55:21.575710 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300 09:55:31.575396 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 00:e0:18:26:38:3a (oui Unknown), length: 300 в итоге имею вот ето ws-5# ifconfig sis0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.3.5 netmask 0xffffff00 broadcast 192.168.3.255 ether 00:e0:18:26:38:3a media: Ethernet autoselect (100baseTX <full-duplex>) status: active rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet 192.168.2.5 netmask 0xffffff00 broadcast 192.168.2.255 ether 00:02:44:33:6b:8c media: Ethernet autoselect (100baseTX <full-duplex>) status: active plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 inet6 ::1 prefixlen 128 inet 127.0.0.1 netmask 0xff000000 pfsync0: flags=0<> mtu 2020 syncpeer: 224.0.0.240 maxupd: 128 vlan33: flags=8002<BROADCAST,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 vlan: 0 parent interface: <none> vlan34: flags=8002<BROADCAST,MULTICAST> mtu 1500 ether 00:00:00:00:00:00 vlan: 0 parent interface: <none> vlan3014: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether 00:e0:18:26:38:3a media: Ethernet autoselect (100baseTX <full-duplex>) status: active vlan: 3014 parent interface: sis0 Вроде бы все правильно но не рулит , в чем же дело?

Ваше сообщение

Имя*:

EMail:

Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email).
Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.

Заголовок*:

Сообщение*:

>>[оверквотинг удален] 
>>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 14 
>>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 8 
>>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 18 
>>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 7 
>>>DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 6 
>>>No DHCPOFFERS received.
>>>No working leases in persistent database - sleepin 
>> 
>>что показывает trafshow или tcpdump?
>>В Влан3014 заходят ответы от сервера?

> Вы пправы sis0 у меня не был up,решил сча подымать его при 
> старте вот сча rc.conf

> ifconfig_sis0="192.168.3.5/24" 
> ifconfig_vlan3014="inet 10.1.14.6 netmask 255.255.255.0 vlan 3014 vlandev sis0"

> ws-5# ifconfig 
> sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 
>         options=8<VLAN_MTU> 
>         inet 192.168.3.5 netmask 0xffffff00 
> broadcast 192.168.3.255 
>         ether 00:e0:18:26:38:3a 
>         media: Ethernet autoselect (100baseTX 
> <full-duplex>) 
>         status: active 
> rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 
>         options=8<VLAN_MTU> 
>         inet 192.168.2.5 netmask 0xffffff00 
> broadcast 192.168.2.255 
>         ether 00:02:44:33:6b:8c 
>         media: Ethernet autoselect (100baseTX 
> <full-duplex>) 
>         status: active 
> plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 
> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208 
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 
>         inet6 fe80::1%lo0 prefixlen 64 
> scopeid 0x5 
>         inet6 ::1 prefixlen 128 
 
>         inet 127.0.0.1 netmask 0xff000000 
 
> pfsync0: flags=0<> mtu 2020 
>         syncpeer: 224.0.0.240 maxupd: 128 
 
> vlan33: flags=8002<BROADCAST,MULTICAST> mtu 1500 
>         ether 00:00:00:00:00:00 
>         vlan: 0 parent interface: 
> <none> 
> vlan34: flags=8002<BROADCAST,MULTICAST> mtu 1500 
>         ether 00:00:00:00:00:00 
>         vlan: 0 parent interface: 
> <none> 
> vlan3014: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 
>         inet 10.1.14.6 netmask 0xffffff00 
> broadcast 10.1.14.255 
>         ether 00:e0:18:26:38:3a 
>         media: Ethernet autoselect (100baseTX 
> <full-duplex>) 
>         status: active 
>         vlan: 3014 parent interface: 
> sis0 
> вот с таки параметрами загружаюсь потом делаю 
> ws-5# /sbin/dhclient -c /etc/dhclient.conf vlan3014 
> DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 5 
> DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 14 
> DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 15 
> DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 15 
> DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 10 
> DHCPDISCOVER on vlan3014 to 255.255.255.255 port 67 interval 2 
> No DHCPOFFERS received.
> No working leases in persistent database - sleeping.
> паралельно смотрю 
> ws-5# tcpdump -i vlan3014 
> tcpdump: verbose output suppressed, use -v or -vv for full protocol decode 
 
> listening on vlan3014, link-type EN10MB (Ethernet), capture size 96 bytes 
> 09:54:32.577478 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 
> 00:e0:18:26:38:3a (oui Unknown), length: 300 
> 09:54:37.578498 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 
> 00:e0:18:26:38:3a (oui Unknown), length: 300 
> 09:54:51.577653 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 
> 00:e0:18:26:38:3a (oui Unknown), length: 300 
> 09:55:06.576677 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 
> 00:e0:18:26:38:3a (oui Unknown), length: 300 
> 09:55:21.575710 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 
> 00:e0:18:26:38:3a (oui Unknown), length: 300 
> 09:55:31.575396 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 
> 00:e0:18:26:38:3a (oui Unknown), length: 300 
> в итоге имею вот ето 
> ws-5# ifconfig 
> sis0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 
>         options=8<VLAN_MTU> 
>         inet 192.168.3.5 netmask 0xffffff00 
> broadcast 192.168.3.255 
>         ether 00:e0:18:26:38:3a 
>         media: Ethernet autoselect (100baseTX 
> <full-duplex>) 
>         status: active 
> rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 
>         options=8<VLAN_MTU> 
>         inet 192.168.2.5 netmask 0xffffff00 
> broadcast 192.168.2.255 
>         ether 00:02:44:33:6b:8c 
>         media: Ethernet autoselect (100baseTX 
> <full-duplex>) 
>         status: active 
> plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500 
> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33208 
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 
>         inet6 fe80::1%lo0 prefixlen 64 
> scopeid 0x5 
>         inet6 ::1 prefixlen 128 
 
>         inet 127.0.0.1 netmask 0xff000000 
 
> pfsync0: flags=0<> mtu 2020 
>         syncpeer: 224.0.0.240 maxupd: 128 
 
> vlan33: flags=8002<BROADCAST,MULTICAST> mtu 1500 
>         ether 00:00:00:00:00:00 
>         vlan: 0 parent interface: 
> <none> 
> vlan34: flags=8002<BROADCAST,MULTICAST> mtu 1500 
>         ether 00:00:00:00:00:00 
>         vlan: 0 parent interface: 
> <none> 
> vlan3014: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 
>         inet 0.0.0.0 netmask 0xff000000 
> broadcast 255.255.255.255 
>         ether 00:e0:18:26:38:3a 
>         media: Ethernet autoselect (100baseTX 
> <full-duplex>) 
>         status: active 
>         vlan: 3014 parent interface: 
> sis0 
> Вроде бы все правильно но не рулит , в чем же дело?

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

На сайте действует частичное премодерирование - после публикации некоторые сообщения от анонимов могут автоматически скрываться ботом. После проверки модератором ошибочно скрытые сообщения раскрываются. Для ускорения раскрытия можно воспользоваться ссылкой "Сообщить модератору", указав в качестве причины обращения "скрыто по ошибке".

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру