The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]




Версия для распечатки Пред. тема | След. тема
Новые ответы [ Отслеживать ]
Проблема с нагрузкой на 1841 ipsec ?, !*! macho, 31-Май-10, 16:51  [смотреть все]
Всем привет, имеем на одном конце VTI тунеля 2811 с aim vpn EPII plus, на другом 1841.

Конфиг с 1841


Building configuration...

!
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
hostname vrh.c1841
!
boot-start-marker
boot-end-marker
!
logging buffered 4096 warnings
no logging console
no logging monitor
enable secret 5 $1$ecOd$.noqOSFisnTJ01D93Vauq.
!
aaa new-model
!
!
aaa authentication login default local
aaa authentication login console local
aaa accounting send stop-record authentication failure
!
aaa session-id common
clock timezone MSK 3
clock summer-time MSK_Summer recurring last Sun Mar 2:00 last Sun Oct 3:00
no ip source-route
no ip gratuitous-arps
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.25.3
!
ip dhcp pool dhcppoolSTAFF
   import all
   network 172.23.0.0 255.255.255.0
   default-router 172.23.0.1
   dns-server 172.16.0.11
   option 176 ascii L2QVLAN=30,HTTPSRVR=172.16.0.23,HTTPDIR=/46xx/,MCIPADD=172.16.0.90
   option 242 ascii L2QVLAN=30,HTTPSRVR=172.16.0.23,HTTPDIR=/46xx/,MCIPADD=172.16.0.90
!
ip dhcp pool dhcppoolVOIP
   import all
   network 172.23.1.0 255.255.255.0
   default-router 172.23.1.1
   dns-server 172.16.0.11
   option 242 ascii L2QVLAN=30,HTTPSRVR=172.16.0.23,HTTPDIR=/46xx/,MCIPADD=172.16.0.90
   option 176 ascii L2QVLAN=30,HTTPSRVR=172.16.0.23,HTTPDIR=/46xx/,MCIPADD=172.16.0.90
!
!
no ip bootp server

ip inspect name firewall cuseeme
ip inspect name firewall dns
ip inspect name firewall ftp
ip inspect name firewall h323
ip inspect name firewall https
ip inspect name firewall icmp
ip inspect name firewall imap
ip inspect name firewall pop3
ip inspect name firewall netshow
ip inspect name firewall rcmd
ip inspect name firewall realaudio
ip inspect name firewall rtsp
ip inspect name firewall esmtp
ip inspect name firewall sqlnet
ip inspect name firewall streamworks
ip inspect name firewall tftp
ip inspect name firewall tcp
ip inspect name firewall udp
ip inspect name firewall vdolive
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
ip ips sdf location flash://128MB.sdf
ip ips signature 4620 0 disable
ip ips signature 2156 0 disable
ip ips name ips_rule
!
!
archive
path tftp://172.16.0.23/vrh.c1841/
write-memory
!
!
ip ssh version 2
!
class-map match-all voip
match access-group 150
!
!
policy-map voip_prio
class voip
  priority 9000
class class-default
  fair-queue
  random-detect
policy-map total
class class-default
  shape average 10000000
  service-policy voip_prio
!
!
!
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp key nhytne address
crypto isakmp key neytkne address
crypto isakmp invalid-spi-recovery
crypto isakmp keepalive 20 periodic
!
!
crypto ipsec transform-set fox esp-3des esp-sha-hmac
!
crypto ipsec profile foxprof
set transform-set fox
!
!
!
!
interface Tunnel2
ip address 10.1.2.126 255.255.255.252
load-interval 30
keepalive 10 3
tunnel source FastEthernet0/0
tunnel destination 8
tunnel mode ipsec ipv4
tunnel protection ipsec profile foxprof
service-policy output total
!
interface Tunnel3
ip address 10.1.1.126 255.255.255.252
ip ospf cost 20100
keepalive 10 3
tunnel source FastEthernet0/0
tunnel destination 8
tunnel mode ipsec ipv4
tunnel protection ipsec profile foxprof
service-policy output total
!        
interface FastEthernet0/0
ip address 8
ip access-group 103 in
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
no mop enabled
!
interface FastEthernet0/1
no ip address
no ip proxy-arp
ip virtual-reassembly
duplex auto
speed auto
no mop enabled
!
interface FastEthernet0/1.1
description #voip#
encapsulation dot1Q 30
ip address 172.23.1.1 255.255.255.0
no cdp enable
!
interface FastEthernet0/1.2
description #management#
encapsulation dot1Q 20
ip address 172.23.2.1 255.255.255.240
no cdp enable
!
interface FastEthernet0/1.3
description #Staff#
encapsulation dot1Q 10
ip address 172.23.0.1 255.255.255.0
ip access-group 100 in
no ip proxy-arp
ip nat inside
ip virtual-reassembly
no cdp enable
!
router ospf 1
log-adjacency-changes
passive-interface FastEthernet0/1
passive-interface FastEthernet0/1.1
passive-interface FastEthernet0/1.2
passive-interface FastEthernet0/1.3
network 10.1.1.124 0.0.0.3 area 0
network 10.1.2.124 0.0.0.3 area 0
network 172.23.0.0 0.0.0.255 area 40
network 172.23.1.0 0.0.0.255 area 40
network 172.23.2.0 0.0.0.15 area 40
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 8
!
!        
no ip http server
ip http authentication local
no ip http secure-server
!
ip access-list standard vty_in
permit 172.16.0.29
permit 172.22.1.0 0.0.0.255
permit 83.242.184.144 0.0.0.7
deny   any
!
logging 172.16.0.29

snmp-server community bublik RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps ds1
snmp-server enable traps tty
snmp-server enable traps eigrp
snmp-server enable traps envmon
snmp-server enable traps flash insertion removal
snmp-server enable traps icsudsu
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps isdn chan-not-avail
snmp-server enable traps isdn ietf
snmp-server enable traps ds0-busyout
snmp-server enable traps ds1-loopback
snmp-server enable traps aaa_server
snmp-server enable traps atm subif
snmp-server enable traps bgp
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps cnpd
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps dsp card-status
snmp-server enable traps entity
snmp-server enable traps event-manager
snmp-server enable traps frame-relay
snmp-server enable traps frame-relay subif
snmp-server enable traps hsrp
snmp-server enable traps ipmobile
snmp-server enable traps ipmulticast
snmp-server enable traps msdp
snmp-server enable traps mvpn
snmp-server enable traps ospf state-change
snmp-server enable traps ospf errors
snmp-server enable traps ospf retransmit
snmp-server enable traps ospf lsa
snmp-server enable traps ospf cisco-specific state-change nssa-trans-change
snmp-server enable traps ospf cisco-specific state-change shamlink interface-old
snmp-server enable traps ospf cisco-specific state-change shamlink neighbor
snmp-server enable traps ospf cisco-specific errors
snmp-server enable traps ospf cisco-specific retransmit
snmp-server enable traps ospf cisco-specific lsa
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps pppoe
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps rtr
snmp-server enable traps syslog
snmp-server enable traps l2tun session
snmp-server enable traps vtp
snmp-server enable traps isakmp policy add
snmp-server enable traps isakmp policy delete
snmp-server enable traps isakmp tunnel start
snmp-server enable traps isakmp tunnel stop
snmp-server enable traps ipsec cryptomap add
snmp-server enable traps ipsec cryptomap delete
snmp-server enable traps ipsec cryptomap attach
snmp-server enable traps ipsec cryptomap detach
snmp-server enable traps ipsec tunnel start
snmp-server enable traps ipsec tunnel stop
snmp-server enable traps ipsec too-many-sas
!
end


вот ненмого подрезал )не обращайте внимание на инспекты, и наты, они отключены.

Так вот 12 человек сосут по тунелю траф

Service-policy output: total

    Class-map: class-default (match-any)
      82236817 packets, 48323505192 bytes
      30 second offered rate 7491000 bps, drop rate 0 bps
      Match: any
      Traffic Shaping
           Target/Average   Byte   Sustain   Excess    Interval  Increment
             Rate           Limit  bits/int  bits/int  (ms)      (bytes)  
         10000000/10000000  62500  250000    250000    25        31250    

        Adapt  Queue     Packets   Bytes     Packets   Bytes     Shaping
        Active Depth                         Delayed   Delayed   Active
        -      0         82193704  889838205 34673     36096166  no

      Service-policy : voip_prio

        Class-map: voip (match-all)
          3702213 packets, 235637454 bytes
          30 second offered rate 0 bps, drop rate 0 bps
          Match: access-group 150
          Queueing
            Strict Priority
            Output Queue: Conversation 264
            Bandwidth 9000 (kbps) Burst 225000 (Bytes)
            (pkts matched/bytes matched) 863/51534
            (total drops/bytes drops) 0/0

а вот и проблема:


    787655565599999999999999999999999999999999986666666655669985
    828394385536597755678577946665666977997856482057514489893443
100            **##********** ***********#****                  
90           *##############*##*###########*#**            **  
80 ***       *##############*#################*            *#*
70 #*#    *  #################################*  ***     **##*
60 ####*  ***##########################################**####*
50 ##########################################################**
40 ###########################################################*
30 ###########################################################*
20 ############################################################
10 ############################################################
   0....5....1....1....2....2....3....3....4....4....5....5....6
             0    5    0    5    0    5    0    5    0    5    0
               CPU% per minute (last 60 minutes)
              * = maximum CPU%   # = average CPU%

Это нормально? При 7491000 бит/с , это я еще на 50 не разогнал )


По поводу Qos ... можно и GRE шейпить, но мне удобнее мой вариант.

2811 грузится до 60% при наличии только ЭТОГО трафа.


добавлю что sh proc cpu sorted | exc 0.0 не дает результатов

  • Проблема с нагрузкой на 1841 ipsec ?, !*! macho, 13:08 , 01-Июн-10 (1)
    итого при full duplex 16491000 бит/с
    • Проблема с нагрузкой на 1841 ipsec ?, !*! Pve1, 13:46 , 01-Июн-10 (2)
      >итого при full duplex 16491000 бит/с

      Это в принципе достойный результат.
      В цисковом мануале DMVPN deployment guide вроде примерно такие результаты и приводится.

      • Проблема с нагрузкой на 1841 ipsec ?, !*! macho, 14:32 , 01-Июн-10 (3)
        >>итого при full duplex 16491000 бит/с
        >
        >Это в принципе достойный результат.
        >В цисковом мануале DMVPN deployment guide вроде примерно такие результаты и приводится.
        >

        это они приводят пример пропускной в 2 стороны суммарно ? правильно...

        • Проблема с нагрузкой на 1841 ipsec ?, !*! Pve1, 16:29 , 01-Июн-10 (4)
          Scalability Test Methodology

          The headend scalability test bed consists of a number of Cisco branch routers (various types, including the 1700, 2600, 3600, 3700, 1800, 2800, and 3800 Series) homed to various types of headends. For most of the traffic sent through the network, flows are established using the Ixia Chariot testing tool. The bps mix of traffic is approximately 35 percent UDP and 65 percent TCP; application types represented in the mix include the following: VoIP, FTP, DNS, HTTP, POP3, and TN3270. The average packet size is 188 bytes, from headend to branch, and 144 bytes from branch to headend. This relatively small average packet size ensures that the scalability results presented support a converged network design, and tends to be fairly conservative. A network carrying data-only traffic, with a larger average packet size, may achieve better bps performance than that listed here. However, the pps performance given a specific CPU value should be the same.
          Some traffic is also generated by the Cisco IP SLA feature in Cisco IOS, formerly known as Cisco Service Assurance Agent (SAA), using the HTTP Get script, with the branch routers making an HTTP Get call to an HTTP server in the core. Testing was conducted without fragmentation occurring in the network by setting the MTU to 1300 bytes on the test endpoints.
          The following tables show results for testing with a configuration for the DMVPN tunnel aggregation. The routing protocol used during testing was EIGRP unless otherwise stated. The traffic mix used, as stated earlier, is converged data and g.729 VoIP.

          A single tunnel was configured to the aggregation headend. Cisco IOS-FW and NAT services were also engaged during the test.

          Platform    HW Encryption     # Voice Calls     Throughput (kpps)   Throughput (Mbps)  CPU

          Cisco 2811     on-board          19               2.6                 5.8             79%

          Cisco 2811  AIM-VPN/EPII-Plus    27               3.6                 8.0             80%





Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру