>собрана конфигурация на базе двух zyxel 782R lan-lan (конфиг прилагается), никакой IP
>траффик кроме ping'а между сетками 192.168.1.0 и 192.168.2.0 не проходит, подскажите
>пожалуйста в чём может быть проблема ?
>
> server
>
>    Menu 1 - General Setup
>            
>        System Name= s1
>
>            
>        Location= nik
>            
>        Contact Person's Name=
>maf
>
>
>            
>        Route IP= Yes
>
>            
>        Route IPX= No
>
>            
>        Bridge= No
>
>    Menu 2 - WAN Setup
>            
>        Service Type= Server
>
>            
>        Rate Adaption= Enable
>
>            
>        Transfer Max Rate(Kbps)=
>2312K
>            
>        Transfer Min Rate(Kbps)=
>72K
>            
>        Standard Mode= ETSI(ANNEX_B)
>
>
>    Menu 3.2 - TCP/IP and DHCP Ethernet Setup
>
>            
>        DHCP Setup
>            
>          DHCP=
>Server
>            
>          Client
>IP Pool Starting Address= 192.168.1.33
>            
>          Size
>of Client IP Pool= 4
>            
>          Primary
>DNS Server= 0.0.0.0
>            
>          Secondary
>DNS Server= 0.0.0.0
>            
>          Remote
>DHCP Server= N/A
>            
>        TCP/IP Setup:
>            
>          IP
>Address= 192.168.1.1
>            
>          IP
>Subnet Mask= 255.255.255.0
>            
>          RIP
>Direction= Both
>            
>          
> Version= RIP-1
>            
>          Multicast=
>None
>            
>          IP
>Policies=
>            
>          Edit
>IP Alias= No
>
>    Menu 4 - Internet Access Setup
>            
>        ISP's Name= c1
>
>            
>        Encapsulation= RFC 1483
>
>            
>        Multiplexing= LLC-based
>            
>        VPI #= 0
>
>            
>        VCI #= 38
>
>            
>        Peak Cell Rate
>(cell/sec)= 20000
>            
>        Sustain Cell Rate
>(cell/sec)= 0
>            
>        Maximum Burst Size
>(cell)= 0
>            
>        Service Name= N/A
>
>            
>        My Login= N/A
>
>            
>        My Password= N/A
>
>            
>        Single User Account=
>No
>            
>        IP Address Assignment=
>N/A
>            
>          IP
>Address= N/A
>            
>        ENET ENCAP Gateway=
>N/A
>
>    Menu 11.1 - Remote Node Profile
>     Rem Node Name= c1    
>          
>     Route= IP
>     Active= Yes      
>          
>         Bridge= No
>
>
>     Encapsulation= RFC 1483    
>         Edit PPP
>Options= N/A
>     Multiplexing= LLC-based      
>        Rem IP Addr=
>192.168.2.1
>     Incoming:      
>          
>          Edit
>IP/IPX/Bridge= No
>       Rem Login= N/A  
>          
>       Edit ATM Options= No
>
>       Rem Password= N/A
>     Outgoing:      
>          
>          Session
>Options:
>       My Login= N/A  
>          
>          Edit
>Filter Sets= No
>       My Password= N/A  
>          
>       PPPoE Idle Timeout(sec)= N/A
>
>       Authen= N/A    
>          
>          
>PPPoE Service Name= N/A
>
>    Menu 24.2.1 - System Maintenance - Information
>            
>        Name: s1
>            
>        Routing: IP
>            
>        ZyNOS F/W Version:
>V2.50(BH.4) | 8/6/2002
>            
>        xDSL F/W Version:
>R.1.5
>            
>        Country Code: 255
>
>
>            
>        LAN
>            
>          Ethernet
>Address: 00:a0:c5:55:2f:13
>            
>          IP
>Address: 192.168.1.1
>            
>          IP
>Mask: 255.255.255.0
>            
>          DHCP:
>Server
>
> client
>
>   Menu 1 - General Setup
>
>            
>        System Name= c1
>
>            
>        Location= nik
>            
>        Contact Person's Name=
>maf
>
>            
>        Route IP= Yes
>
>            
>        Route IPX= No
>
>            
>        Bridge= No
>
>   Menu 2 - WAN Setup
>            
>        Service Type= Client
>
>            
>        Rate Adaption= Enable
>
>            
>        Transfer Max Rate(Kbps)=
>2312K
>            
>        Transfer Min Rate(Kbps)=
>72K
>            
>        Standard Mode= ETSI(ANNEX_B)
>
>
>   Menu 3.2 - TCP/IP and DHCP Ethernet Setup
>            
>        DHCP Setup
>            
>          DHCP=
>None
>            
>          Client
>IP Pool Starting Address= N/A
>            
>          Size
>of Client IP Pool= N/A
>            
>          Primary
>DNS Server= N/A
>            
>          Secondary
>DNS Server= N/A
>            
>          Remote
>DHCP Server= N/A
>            
>        TCP/IP Setup:
>            
>          IP
>Address= 192.168.2.1
>            
>          IP
>Subnet Mask= 255.255.255.0
>            
>          RIP
>Direction= Both
>            
>          
> Version= RIP-1
>            
>          Multicast=
>None
>            
>          IP
>Policies=
>            
>          Edit
>IP Alias= No
>
>    Menu 4 - Internet Access Setup
>            
>        ISP's Name= s1
>
>            
>        Encapsulation= RFC 1483
>
>            
>        Multiplexing= LLC-b
>            
>        VPI #= 0
>
>            
>        VCI #= 38
>
>            
>        Peak Cell Rate
>(cell/sec)=
>            
>        Sustain Cell Rate
>(cell/sec)=
>            
>        Maximum Burst Size
>(cell)=
>            
>        Service Name= N/A
>
>            
>        My Login= N/A
>
>            
>        My Password= N/A
>
>            
>        Single User Account=
>
>            
>        IP Address Assignment=
>N/A
>            
>          IP
>Address= N/A
>            
>        ENET ENCAP Gateway=
>N/A
>
>    Menu 11.1 - Remote Node Profile
>     Rem Node Name= s1    
>          
>     Route= IP
>     Active= Yes      
>          
>         Bridge= No
>
>
>     Encapsulation= RFC 1483    
>         Edit PPP
>Options= N/A
>     Multiplexing= LLC-based      
>        Rem IP Addr=
>192.168.1.1
>     Incoming:      
>          
>          Edit
>IP/IPX/Bridge= No
>       Rem Login= N/A  
>          
>       Edit ATM Options= No
>
>       Rem Password= N/A
>     Outgoing:      
>          
>          Session
>Options:
>       My Login= N/A  
>          
>          Edit
>Filter Sets= No
>       My Password= N/A  
>          
>       PPPoE Idle Timeout(sec)= N/A
>
>       Authen= N/A    
>          
>          
>PPPoE Service Name= N/A
>
>      Menu 24.2.1 - System Maintenance -
>Information
>            
>        Name: c1
>            
>        Routing: IP
>            
>        ZyNOS F/W Version:
>V2.50(BH.4) | 8/6/2002
>            
>        xDSL F/W Version:
>R.1.5
>            
>        Country Code: 255
>
>
>            
>        LAN
>            
>          Ethernet
>Address: 00:a0:c5:55:2f:14
>            
>          IP
>Address: 192.168.2.1
>            
>          IP
>Mask: 255.255.255.0
>            
>          DHCP:
>None
некоторым этого достаточно ...