На 2811 (10.0.3.7) прописываю

interface FastEthernet0/0
 ip address 10.0.3.7 255.255.255.0
 duplex auto
 speed auto
 auto discovery qos

voice-card 0
 dsp services dspfarm

sccp local FastEthernet0/0
sccp ccm 10.0.3.3 identifier 1 version 7.0
sccp
!
sccp ccm group 1
 associate ccm 1 priority 1
 associate profile 2 register CUBA_MTP
 associate profile 1 register CUBA_XCODE
 keepalive retries 1
 keepalive timeout 10
 switchover method immediate
 switchback method immediate
!
dspfarm profile 1 transcode
 codec g711ulaw
 codec g711alaw
 codec g729ar8
 codec g729abr8
 maximum sessions 4
 associate application SCCP
!
dspfarm profile 2 mtp
 codec g711ulaw
 maximum sessions software 100
 associate application SCCP

но show sccp выводит не радосную картину :(

SCCP Admin State: UP
Gateway Local Interface: FastEthernet0/0
        IPv4 Address: 10.0.3.7
        Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.0.3.3, Port Number: 2000
                Priority: N/A, Version: 7.0, Identifier: 1
                Trustpoint: N/A
Transcoding Oper State: ACTIVE_IN_PROGRESS - Cause Code: NOT_REGIS_WITH_CCM
Active Call Manager: NONE
TCP Link Status: NOT_CONNECTED, Profile Identifier: 1
Reported Max Streams: 8, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
MTP Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.0.3.3, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 2
Reported Max Streams: 200, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30

И соответственно на CUCM MTP появляется, а транскодера нет.
Уважаемые, подскажите что я не доделал а?