The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]




Версия для распечатки Пред. тема | След. тема
Новые ответы [ Отслеживать ]
FreeBSD на  Dell inspiron 5160 , !*! ans, 03-Ноя-05, 21:37  [смотреть все]
Хочу установить :)

Кто-нибудь вообще использует FreeBSD  на ноутбуках Dell ??

Какие могут быть грабли ?

Если нужно более точную информацию(память проц и т д ) с радостью предоставлю
только скажите ! :)

Заранее благодарю за ответы

  • FreeBSD на  Dell inspiron 5160 , !*! ans, 12:06 , 07-Дек-05 (1)
    Это ^^^^^^^^^^^^^^^^^^^^ сделал :)

    Спасибо всем за ответы :)

    вот в чём вопрос теперь


    # dmesg
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 6.0-RELEASE #0: Mon Dec  5 04:51:37 YEKT 2005
        root@sc213:/usr/src/sys/i386/compile/DeLL
    ACPI APIC Table: <DELL   CPi R  >
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Mobile Intel(R) Pentium(R) 4 CPU 2.80GHz (2791.01-MHz 686-class CPU)
      Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
      Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
      Features2=0x459d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,CNTX-ID,<b14>>
      Hyperthreading: 2 logical CPUs
    real memory  = 536662016 (511 MB)
    avail memory = 515833856 (491 MB)
    ioapic0: Changing APIC ID to 2
    ioapic0 <Version 2.0> irqs 0-23 on motherboard
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <DELL CPi R  > on motherboard
    pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
    pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
    pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
    pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
    pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
    pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0
    Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    cpu0: <ACPI CPU> on acpi0
    acpi_throttle0: <ACPI CPU Throttling> on cpu0
    acpi_acad0: <AC Adapter> on acpi0
    battery0: <ACPI Control Method Battery> on acpi0
    acpi_lid0: <Control Method Lid Switch> on acpi0
    acpi_button0: <Power Button> on acpi0
    acpi_button1: <Sleep Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    pci0: <base peripheral> at device 0.1 (no driver attached)
    pci0: <base peripheral> at device 0.3 (no driver attached)
    pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
    pci1: <ACPI PCI bus> on pcib1
    pci1: <display, VGA> at device 0.0 (no driver attached)
    uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 16 at device 29.0 on pci0
    uhci0: [GIANT-LOCKED]
    usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 19 at device 29.1 on pci0
    uhci1: [GIANT-LOCKED]
    usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 18 at device 29.2 on pci0
    uhci2: [GIANT-LOCKED]
    usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
    usb2: USB revision 1.0
    uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub2: 2 ports with 2 removable, self powered
    ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 23 at device 29.7 on pci0
    ehci0: [GIANT-LOCKED]
    usb3: EHCI version 1.0
    usb3: companion controllers, 2 ports each: usb0 usb1 usb2
    usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
    usb3: USB revision 2.0
    uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
    uhub3: 6 ports with 6 removable, self powered
    pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
    pci2: <ACPI PCI bus> on pcib2
    bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 17 at device 1.0 on pci2
    miibus0: <MII bus> on bfe0
    bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
    bmtphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    bfe0: Ethernet address: 00:11:43:61:8a:3e
    pci2: <network> at device 2.0 (no driver attached)
    cbb0: <TI4510 PCI-CardBus Bridge> at device 4.0 on pci2
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    fwohci0: <1394 Open Host Controller Interface> mem 0xfaffb800-0xfaffbfff,0xfaff4000-0xfaff7fff irq 16 at device 4.1 on pci2
    fwohci0: OHCI version 1.10 (ROM=0)
    fwohci0: No. of Isochronous channels is 4.
    fwohci0: EUI64 4a:4f:c0:00:32:a1:34:30
    fwohci0: Phy 1394a available S400, 2 ports.
    fwohci0: Link S400, max_rec 2048 bytes.
    firewire0: <IEEE1394(FireWire) bus> on fwohci0
    fwohci0: Initiate bus reset
    fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
    firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
    firewire0: bus manager 0 (me)
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0
    ata0: <ATA channel 0> on atapci0
    ata1: <ATA channel 1> on atapci0
    pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 17 at device 31.5 on pci0
    pcm0: [GIANT-LOCKED]
    pcm0: <SigmaTel STAC9750/51 AC97 Codec>
    > pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
    acpi_tz0: <Thermal Zone> on acpi0
    atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    pmtimer0 on isa0
    orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    ums0: vendor 0x1267 PS/2+USB Mouse, rev 1.10/22.55, addr 2, iclass 3/1
    ums0: 3 buttons and Z dir.
    Timecounter "TSC" frequency 2791010565 Hz quality 800
    Timecounters tick every 1.000 msec
    battery0: critically low charge!
    acd0: CDRW <PHILIPS CD-RW/DVD-ROM CDD5263/UD91> at ata0-master UDMA33
    ad2: 76319MB <TOSHIBA MK8026GAX PA001G> at ata1-master UDMA100
    Trying to mount root from ufs:/dev/ad2s1a


    # pciconf -lv
    hostb0@pci0:0:0:        class=0x060000 card=0x01961028 chip=0x35808086 rev=0x02 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface Bridge'
        class    = bridge
        subclass = HOST-PCI
    none0@pci0:0:1: class=0x088000 card=0x01961028 chip=0x35848086 rev=0x02 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory Controller'
        class    = base peripheral
    none1@pci0:0:3: class=0x088000 card=0x01961028 chip=0x35858086 rev=0x02 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process'
        class    = base peripheral
    pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x35818086 rev=0x02 hdr=0x01
        vendor   = 'Intel Corporation'
        device   = '82852GME/PM Montara Virtual PCI to AGP Bridge'
        class    = bridge
        subclass = PCI-PCI
    uhci0@pci0:29:0:        class=0x0c0300 card=0x01961028 chip=0x24c28086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
        class    = serial bus
        subclass = USB
    uhci1@pci0:29:1:        class=0x0c0300 card=0x01961028 chip=0x24c48086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2'
        class    = serial bus
        subclass = USB
    uhci2@pci0:29:2:        class=0x0c0300 card=0x01961028 chip=0x24c78086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3'
        class    = serial bus
        subclass = USB
    ehci0@pci0:29:7:        class=0x0c0320 card=0x01961028 chip=0x24cd8086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller'
        class    = serial bus
        subclass = USB
    pcib2@pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086 rev=0x81 hdr=0x01
        vendor   = 'Intel Corporation'
        device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
        class    = bridge
        subclass = PCI-PCI
    isab0@pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DBM (ICH4-M) LPC Interface Bridge'
        class    = bridge
        subclass = PCI-ISA
    atapci0@pci0:31:1:      class=0x01018a card=0x01961028 chip=0x24ca8086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
        class    = mass storage
        subclass = ATA
    pcm0@pci0:31:5: class=0x040100 card=0x01961028 chip=0x24c58086 rev=0x01 hdr=0x00
        vendor   = 'Intel Corporation'
        device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
        class    = multimedia
        subclass = audio
    > none2@pci0:31:6:        class=0x070300 card=0x4d6414e4 chip=0x24c68086   > rev=0x01 hdr=0x00
    >    vendor   = 'Intel Corporation'
    >    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem          >  Controller'
    >    class    = simple comms
    >    subclass = generic modem
    none3@pci1:0:0: class=0x030000 card=0x01961028 chip=0x032410de rev=0xa1 hdr=0x00
        vendor   = 'NVIDIA Corporation'
        device   = 'NV31 nVidia GeForce FX Go 5200, 64MB'
        class    = display
        subclass = VGA
    bfe0@pci2:1:0:  class=0x020000 card=0x01961028 chip=0x170c14e4 rev=0x02 hdr=0x00
        vendor   = 'Broadcom Corporation'
        device   = 'BCM440x 100Base-TX Fast Ethernet'
        class    = network
        subclass = ethernet
    none4@pci2:2:0: class=0x028000 card=0x00031028 chip=0x432014e4 rev=0x03 hdr=0x00
        vendor   = 'Broadcom Corporation'
        device   = 'BCM4306 802.11b/g Wireless LAN Controller'
        class    = network
    cbb0@pci2:4:0:  class=0x060700 card=0x01961028 chip=0xac44104c rev=0x02 hdr=0x02
        vendor   = 'Texas Instruments (TI)'
        device   = 'PCI4510SDFSDFSD PC Card Controller SDFSDAFSADFSDAFSDAF'
        class    = bridge
        subclass = PCI-CardBus
    fwohci0@pci2:4:1:       class=0x0c0010 card=0x01961028 chip=0x8029104c rev=0x00 hdr=0x00
        vendor   = 'Texas Instruments (TI)'
        device   = '??? OHCI Compliant IEEE-1394 FireWire Controller'
        class    = serial bus
        subclass = FireWire

    как модем можно настроить ?

    Я уже всё перелазил нечего толкового не нашёл :(

    Подскажите пожалуйста




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру