Добрый день!
настраиваю PPTPD+FreeRADIUS
(pptpd v1.3.4
FreeRADIUS Version 2.1.10, for host i686-pc-linux-gnu, built on Sep 24 2012 at)Вот по этому ману http://www.tux.in.ua/articles/66
PPTPD настроил и отдельно работает норм, сложности при подключении RADIUS
При выполнении freeradius -X
ошибка выскакивает!!!!!!!!!!!!!!!!!!
Failed binding to authentication address 127.0.0.1 port 1812: Address already in use
/etc/freeradius/radiusd.conf[240]: Error binding to port for 127.0.0.1 port 1812
выдержка по ошибке 240 строки
listen {
# Type of packets to listen for.
# Allowed values are:
# auth listen for authentication packets
# acct listen for accounting packets
# proxy IP to use for sending proxied packets
# detail Read from the detail file. For examples, see
# raddb/sites-available/copy-acct-to-home-server
# status listen for Status-Server packets. For examples,
# see raddb/sites-available/status
# coa listen for CoA-Request and Disconnect-Request
# packets. For examples, see the file
# raddb/sites-available/coa-server
#
type = auth
# Note: "type = proxy" lets you control the source IP used for
# proxying packets, with some limitations:
#
# * A proxy listener CANNOT be used in a virtual server section.
# * You should probably set "port = 0".
# * Any "clients" configuration will be ignored.
#
# See also proxy.conf, and the "src_ipaddr" configuration entry
# in the sample "home_server" section. When you specify the
# source IP address for packets sent to a home server, the
# proxy listeners are automatically created.
# IP address on which to listen.
# Allowed values are:
# dotted quad (1.2.3.4)
# hostname (radius.example.com)
# wildcard (*)
ipaddr = 127.0.0.1
# OR, you can use an IPv6 address, but not both
# at the same time.
# ipv6addr = :: # any. ::1 == localhost
# Port on which to listen.
# Allowed values are:
# integer port number (1812)
# 0 means "use /etc/services for the proper port"
port = 0
}
Версия для распечатки
PPTPD+FreeRADIUS ubuntu 12, 
Igor_opennet, 20-Авг-13, 13:46 [смотреть все]
