forum.opennet.ru

Составление сообщения

Исходное сообщение

"Помогите определить, тормозят ли диски?"
Отправлено makarov321, 24-Янв-11 20:16

еще некоторая информация, которая может оказаться полезной.
smartctl -a /dev/ad2
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ES.2
Device Model:     ST31000340NS
Serial Number:    9QJ4ZACA
Firmware Version: SN06
User Capacity:    1,000,204,886,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Jan 23 16:55:17 2011 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 650) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 230) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   081   063   044    Pre-fail  Always       -       163549760
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       36
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   076   060   030    Pre-fail  Always       -       42278682
  9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -       10151
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       36
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   074   063   045    Old_age   Always       -       26 (Min/Max 22/31)
194 Temperature_Celsius     0x0022   026   040   000    Old_age   Always       -       26 (0 17 0 0)
195 Hardware_ECC_Recovered  0x001a   055   007   000    Old_age   Always       -       163549760
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
по второму диску, ad0:
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ES.2
Device Model:     ST31000340NS
Serial Number:    9QJ4YGJQ
Firmware Version: SN06
User Capacity:    1,000,204,886,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Jan 23 16:56:07 2011 MSK
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 634) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 221) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED           RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   072   063   044    Pre-fail  Always       -                 41270381
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -                 0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -                 35
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -                 4
  7 Seek_Error_Rate         0x000f   087   060   030    Pre-fail  Always       -                 9805559816
  9 Power_On_Hours          0x0032   089   089   000    Old_age   Always       -                 10152
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -                 0
12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -                 35
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -                 0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -                 0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -                 0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -                 0
190 Airflow_Temperature_Cel 0x0022   072   060   045    Old_age   Always       -                 28 (Min/Max 24/30)
194 Temperature_Celsius     0x0022   028   040   000    Old_age   Always       -                 28 (0 18 0 0)
195 Hardware_ECC_Recovered  0x001a   053   042   000    Old_age   Always       -                 41270381
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -                 0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -                 0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -                 1
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Не слишком ли большие значения Hardware_ECC_Recovered? О чем это может говорить?

Исходное сообщение
"Помогите определить, тормозят ли диски?" Отправлено makarov321, 24-Янв-11 20:16
еще некоторая информация, которая может оказаться полезной. smartctl -a /dev/ad2 === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ES.2 Device Model: ST31000340NS Serial Number: 9QJ4ZACA Firmware Version: SN06 User Capacity: 1,000,204,886,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Jan 23 16:55:17 2011 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 650) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 230) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 081 063 044 Pre-fail Always - 163549760 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 36 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 076 060 030 Pre-fail Always - 42278682 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10151 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 36 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 074 063 045 Old_age Always - 26 (Min/Max 22/31) 194 Temperature_Celsius 0x0022 026 040 000 Old_age Always - 26 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 055 007 000 Old_age Always - 163549760 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. по второму диску, ad0: === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ES.2 Device Model: ST31000340NS Serial Number: 9QJ4YGJQ Firmware Version: SN06 User Capacity: 1,000,204,886,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sun Jan 23 16:56:07 2011 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 634) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 221) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 072 063 044 Pre-fail Always - 41270381 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 35 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 4 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 9805559816 9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 10152 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 35 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 072 060 045 Old_age Always - 28 (Min/Max 24/30) 194 Temperature_Celsius 0x0022 028 040 000 Old_age Always - 28 (0 18 0 0) 195 Hardware_ECC_Recovered 0x001a 053 042 000 Old_age Always - 41270381 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. Не слишком ли большие значения Hardware_ECC_Recovered? О чем это может говорить?

Ваше сообщение

Имя*:

EMail:

Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email).
Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.

Заголовок*:

Сообщение*:

> еще некоторая информация, которая может оказаться полезной.
> smartctl -a /dev/ad2 
> === START OF INFORMATION SECTION === 
> Model Family:     Seagate Barracuda ES.2 
> Device Model:     ST31000340NS 
> Serial Number:    9QJ4ZACA 
> Firmware Version: SN06 
> User Capacity:    1,000,204,886,016 bytes 
> Device is:        In smartctl database 
> [for details use: -P show] 
> ATA Version is:   8 
> ATA Standard is:  ATA-8-ACS revision 4 
> Local Time is:    Sun Jan 23 16:55:17 2011 MSK 
 
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled

> === START OF READ SMART DATA SECTION === 
> SMART overall-health self-assessment test result: PASSED

> General SMART Values: 
> Offline data collection status:  (0x82) Offline data collection activity 
>             
>            
>            
>       was completed without error.
>             
>            
>            
>       Auto Offline Data Collection: Enabled. 
 
> Self-test execution status:      (   0) 
> The previous self-test routine completed 
>             
>            
>            
>       without error or no self-test 
> has ever 
>             
>            
>            
>       been run.
> Total time to complete Offline 
> data collection:           
>       ( 650) seconds.
> Offline data collection 
> capabilities:            
>         (0x7b) SMART execute 
> Offline immediate.
>             
>            
>            
>       Auto Offline data collection on/off 
> support.
>             
>            
>            
>       Suspend Offline collection upon new 
 
>             
>            
>            
>       command.
>             
>            
>            
>       Offline surface scan supported.
>             
>            
>            
>       Self-test supported.
>             
>            
>            
>       Conveyance Self-test supported.
>             
>            
>            
>       Selective Self-test supported.
> SMART capabilities:           
>  (0x0003) Saves SMART data before entering 
>             
>            
>            
>       power-saving mode.
>             
>            
>            
>       Supports SMART auto save timer. 
 
> Error logging capability:        (0x01) Error 
> logging supported.
>             
>            
>            
>       General Purpose Logging supported.
> Short self-test routine 
> recommended polling time:        (  
>  1) minutes.
> Extended self-test routine 
> recommended polling time:        ( 230) 
> minutes.
> Conveyance self-test routine 
> recommended polling time:        (  
>  2) minutes.
> SCT capabilities:           
>    (0x103d) SCT Status supported.
>             
>            
>            
>       SCT Error Recovery Control supported. 
 
>             
>            
>            
>       SCT Feature Control supported.
>             
>            
>            
>       SCT Data Table supported.

> SMART Attributes Data Structure revision number: 10 
> Vendor Specific SMART Attributes with Thresholds: 
> ID# ATTRIBUTE_NAME          FLAG 
>     VALUE WORST THRESH TYPE    
>   UPDATED  WHEN_FAILED RAW_VALUE 
>   1 Raw_Read_Error_Rate     0x000f   081 
>   063   044    Pre-fail  
> Always       -    
>    163549760 
>   3 Spin_Up_Time         
>    0x0003   099   099  
>  000    Pre-fail  Always    
>    -       0 
 
>   4 Start_Stop_Count        0x0032 
>   100   100   020   
>  Old_age   Always       
> -       36 
>   5 Reallocated_Sector_Ct   0x0033   100   
> 100   036    Pre-fail  Always  
>      -      
>  0 
>   7 Seek_Error_Rate         
> 0x000f   076   060   030  
>   Pre-fail  Always       
> -       42278682 
>   9 Power_On_Hours         
>  0x0032   089   089   000 
>    Old_age   Always     
>   -       10151 
>  10 Spin_Retry_Count        0x0013  
>  100   100   097    
> Pre-fail  Always       -  
>      0 
>  12 Power_Cycle_Count       0x0032   
> 100   037   020    Old_age 
>   Always       -  
>      36 
> 184 End-to-End_Error        0x0032   
> 100   100   099    Old_age 
>   Always       -  
>      0 
> 187 Reported_Uncorrect      0x0032   100  
>  100   000    Old_age   
> Always       -    
>    0 
> 188 Command_Timeout         0x0032  
>  100   100   000    
> Old_age   Always       - 
>       0 
> 189 High_Fly_Writes         0x003a  
>  100   100   000    
> Old_age   Always       - 
>       0 
> 190 Airflow_Temperature_Cel 0x0022   074   063   045 
>    Old_age   Always     
>   -       26 (Min/Max 
> 22/31) 
> 194 Temperature_Celsius     0x0022   026   
> 040   000    Old_age   Always 
>       -     
>   26 (0 17 0 0) 
> 195 Hardware_ECC_Recovered  0x001a   055   007   
> 000    Old_age   Always    
>    -       163549760 
 
> 197 Current_Pending_Sector  0x0012   100   100   
> 000    Old_age   Always    
>    -       0 
 
> 198 Offline_Uncorrectable   0x0010   100   100  
>  000    Old_age   Offline   
>    -       0 
 
> 199 UDMA_CRC_Error_Count    0x003e   200   200 
>   000    Old_age   Always  
>      -      
>  0

> SMART Error Log Version: 1 
> No Errors Logged

> SMART Self-test log structure revision number 1 
> No self-tests have been logged.  [To run self-tests, use: smartctl -t]

> SMART Selective self-test log data structure revision number 1 
>  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS 
>     1        
> 0        0  Not_testing 
 
>     2        
> 0        0  Not_testing 
 
>     3        
> 0        0  Not_testing 
 
>     4        
> 0        0  Not_testing 
 
>     5        
> 0        0  Not_testing 
 
> Selective self-test flags (0x0): 
>   After scanning selected spans, do NOT read-scan remainder of disk. 
 
> If Selective self-test is pending on power-up, resume after 0 minute delay.

> по второму диску, ad0: 
> === START OF INFORMATION SECTION === 
> Model Family:     Seagate Barracuda ES.2 
> Device Model:     ST31000340NS 
> Serial Number:    9QJ4YGJQ 
> Firmware Version: SN06 
> User Capacity:    1,000,204,886,016 bytes 
> Device is:        In smartctl database 
> [for details use: -P show] 
> ATA Version is:   8 
> ATA Standard is:  ATA-8-ACS revision 4 
> Local Time is:    Sun Jan 23 16:56:07 2011 MSK 
 
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled

> === START OF READ SMART DATA SECTION === 
> SMART overall-health self-assessment test result: PASSED

> General SMART Values: 
> Offline data collection status:  (0x82) Offline data collection activity 
>             
>            
>            
>       was completed without error.
>             
>            
>            
>       Auto Offline Data Collection: Enabled. 
 
> Self-test execution status:      (   0) 
> The previous self-test routine completed 
>             
>            
>            
>       without error or no self-test 
> has ever 
>             
>            
>            
>       been run.
> Total time to complete Offline 
> data collection:           
>       ( 634) seconds.
> Offline data collection 
> capabilities:            
>         (0x7b) SMART execute 
> Offline immediate.
>             
>            
>            
>       Auto Offline data collection on/off 
> support.
>             
>            
>            
>       Suspend Offline collection upon new 
 
>             
>            
>            
>       command.
>             
>            
>            
>       Offline surface scan supported.
>             
>            
>            
>       Self-test supported.
>             
>            
>            
>       Conveyance Self-test supported.
>             
>            
>            
>       Selective Self-test supported.
> SMART capabilities:           
>  (0x0003) Saves SMART data before entering 
>             
>            
>            
>       power-saving mode.
>             
>            
>            
>       Supports SMART auto save timer. 
 
> Error logging capability:        (0x01) Error 
> logging supported.
>             
>            
>            
>       General Purpose Logging supported.
> Short self-test routine 
> recommended polling time:        (  
>  1) minutes.
> Extended self-test routine 
> recommended polling time:        ( 221) 
> minutes.
> Conveyance self-test routine 
> recommended polling time:        (  
>  2) minutes.
> SCT capabilities:           
>    (0x103d) SCT Status supported.
>             
>            
>            
>       SCT Error Recovery Control supported. 
 
>             
>            
>            
>       SCT Feature Control supported.
>             
>            
>            
>       SCT Data Table supported.

> SMART Attributes Data Structure revision number: 10 
> Vendor Specific SMART Attributes with Thresholds: 
> ID# ATTRIBUTE_NAME          FLAG 
>     VALUE WORST THRESH TYPE    
>   UPDATED  WHEN_FAILED       
>     RAW_VALUE 
>   1 Raw_Read_Error_Rate     0x000f   072 
>   063   044    Pre-fail  
> Always       -    
>            
>   41270381 
>   3 Spin_Up_Time         
>    0x0003   099   099  
>  000    Pre-fail  Always    
>    -        
>          0 
>   4 Start_Stop_Count        0x0032 
>   100   100   020   
>  Old_age   Always       
> -           
>       35 
>   5 Reallocated_Sector_Ct   0x0033   100   
> 100   036    Pre-fail  Always  
>      -      
>            
> 4 
>   7 Seek_Error_Rate         
> 0x000f   087   060   030  
>   Pre-fail  Always       
> -           
>       9805559816 
>   9 Power_On_Hours         
>  0x0032   089   089   000 
>    Old_age   Always     
>   -         
>         10152 
>  10 Spin_Retry_Count        0x0013  
>  100   100   097    
> Pre-fail  Always       -  
>            
>     0 
>  12 Power_Cycle_Count       0x0032   
> 100   037   020    Old_age 
>   Always       -  
>            
>     35 
> 184 End-to-End_Error        0x0032   
> 100   100   099    Old_age 
>   Always       -  
>            
>     0 
> 187 Reported_Uncorrect      0x0032   100  
>  100   000    Old_age   
> Always       -    
>            
>   0 
> 188 Command_Timeout         0x0032  
>  100   100   000    
> Old_age   Always       - 
>            
>      0 
> 189 High_Fly_Writes         0x003a  
>  100   100   000    
> Old_age   Always       - 
>            
>      0 
> 190 Airflow_Temperature_Cel 0x0022   072   060   045 
>    Old_age   Always     
>   -         
>         28 (Min/Max 24/30) 
 
> 194 Temperature_Celsius     0x0022   028   
> 040   000    Old_age   Always 
>       -     
>            
>  28 (0 18 0 0) 
> 195 Hardware_ECC_Recovered  0x001a   053   042   
> 000    Old_age   Always    
>    -        
>          41270381 
> 197 Current_Pending_Sector  0x0012   100   100   
> 000    Old_age   Always    
>    -        
>          0 
> 198 Offline_Uncorrectable   0x0010   100   100  
>  000    Old_age   Offline   
>    -        
>          0 
> 199 UDMA_CRC_Error_Count    0x003e   200   200 
>   000    Old_age   Always  
>      -      
>            
> 1

> SMART Error Log Version: 1 
> No Errors Logged

> SMART Self-test log structure revision number 1 
> No self-tests have been logged.  [To run self-tests, use: smartctl -t]

> Не слишком ли большие значения Hardware_ECC_Recovered? О чем это может говорить?

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру