1 подключаемые
2 настроено согласно гуглению на pcm1 Подозреваю что и так на нем был так как default
3 что угодно лишь бы и там и там работало
4 sysctl dev.hdac.0.pindump=1
dev.hdac.0.pindump: 0 -> 0
root@FreeBSD:/usr/home/bsd # dmesg
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
module_register: cannot register mmc/mmcsd from kernel; already loaded from mmcsd.ko
Module mmc/mmcsd failed to register: 17
CPU: Intel(R) Core(TM) i5-4440 CPU @ 3.10GHz (3092.90-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 6442450944 (6144 MB)
avail memory = 6101110784 (5818 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-03 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 3 1 2
Timecounter "TSC-low" frequency 1546449652 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 460.39 Thu Jan 21 21:42:44 UTC 2021
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-03> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xe8000000-0xefffffff,0xf0000000-0xf1ffffff irq 16 at device 0.0 on pci1
nvidia0: <GeForce GT 635> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at device 0.1 on pci1
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7200000-0xf720ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7218000-0xf72183ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Lynx Point HDA Controller> mem 0xf7210000-0xf7213fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib2: [GIANT-LOCKED]
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf7100000-0xf7100fff,0xf2100000-0xf2103fff irq 18 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: c0:3f:d5:3e:12:f7
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7217000-0xf72173ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7216000-0xf72167ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 rev3 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 rev3 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC662 rev3 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
Trying to mount root from ufs:/dev/ada0s1a [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST2000DX001-1CM164 CC62> ACS-2 ATA SATA 3.x device
ada0: Serial Number Z1E6P6GR
ada0: 600.000MB/s transfers (SATA 3.x, UDMA5, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 1907729MB (3907029168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,cd0 in 'Slot 05', SATA Slot: scbus2 target 0
cd0 at ahcich5 bus 0 scbus2 target 0 lun 0
cd0: <PLDS DVD-RW DH16AESH 3L31> Removable CD-ROM SCSI device
cd0: Serial Number S0C19802ZVJ84C00QLVX
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub2: 17 ports with 17 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus0 usbus1 usbus2
ugen0.2: <SEM USB Keyboard> at usbus0
ukbd0 on uhub2
ukbd0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
kbd2 at ukbd0
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
uhub3: 4 ports with 4 removable, self powered
uhub4: 6 ports with 6 removable, self powered
ugen0.3: <COMPANY USB Device> at usbus0
ukbd1 on uhub2
ukbd1: <COMPANY USB Device, class 0/0, rev 1.10/13.bf, addr 2> on usbus0
kbd3 at ukbd1
ukbd2 on uhub2
ukbd2: <COMPANY USB Device, class 0/0, rev 1.10/13.bf, addr 2> on usbus0
kbd4 at ukbd2
Root mount waiting for: usbus1
ugen1.3: <Generic USB2.0-CRW> at usbus1
mountroot: waiting for device /dev/ada0s1a...
lo0: link state changed to UP
re0: link state changed to DOWN
uhid0 on uhub2
uhid0: <SEM USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0
ums0 on uhub2
ums0: <COMPANY USB Device, class 0/0, rev 1.10/13.bf, addr 2> on usbus0
ums0: 8 buttons and [XYZ] coordinates ID=0
re0: link state changed to UP
hdaa0: Dumping AFG pins:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 4 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: 6 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: 7 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
hdaa0: Dumping AFG pins:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 4 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: 5 185600f0 15 0 Digital-out Jack Digital 0x18 Unknown 0
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: 6 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: 7 585600f0 15 0 Digital-out None Digital 0x18 Unknown 0 DISA
hdaa0: Caps: OUT Sense: 0x00000000 (disconnected)
hdaa0: NumGPIO=0 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=0
root@FreeBSD:/usr/home/bsd #
|
