The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

mount_smbfs ()
  • >> mount_smbfs (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
  • mount_smbfs (8) ( FreeBSD man: Команды системного администрирования )
  •  

    NAME

    mount_smbfs, umount_smbfs - mount and unmount a shared resource from a CIFS file server
     
    

    SYNOPSIS

    /sbin/mount [-F smbfs] [generic-options] [-o name=value] [-O] resource
    

    /sbin/mount [-F smbfs] [generic-options] [-o name=value] [-O] mount-point
    

    /sbin/mount [-F smbfs] [generic-options] [-o name=value] 
        [-O] resource mount-point
    

    /sbin/umount [-F smbfs] [generic-options] mount-point
    

     

    DESCRIPTION

    The mount utility attaches a named resource, resource, to the file system hierarchy at the path name location, mount-point, which must already exist.

    If mount-point has any contents prior to the mount operation, those contents remain hidden until the resource is unmounted. An authorized user with the SYS_MOUNT privilege can perform a mount operation. Also, a user can perform SMBFS mount operations on a directory the user owns.

    If the resource is listed in the /etc/vfstab file, you can specify either resource or mount-point as the mount command will consult the /etc/vfstab file for more information. If the -F option is omitted, mount takes the file system type from the entry in the /etc/vfstab file.

    If the resource is not listed in the /etc/vfstab file, the command line must specify both resource and mount-point.

    The umount utility detaches a mounted file system from the file system hierarchy. An authorized user with the SYS_MOUNT privilege can perform a umount operation. Also, a user can perform SMBFS unmount operations on a directory the user owns.

    The network/smb/client service must be enabled to successfully mount a CIFS share. This service is enabled, by default.

    To enable the service, enter the following svcadm(1M) command:

    # svcadm enable network/smb/client
    

     

    Operands

    The mount command supports the following operands:

    resource //[workgroup;][user[:password]@]server/share

    The name of the resource to be mounted. In addition to its name, you can specify the following information about the resource:

    o password is the password associated with user. If password is not specified, the mount first attempts to use the password stored by the smbutil login command (if any). If that password fails to authenticate, the mount_smbfs prompts you for a password.
    o server is the DNS or NetBIOS name of the remote computer.
    o share is the resource name on the remote server.
    o user is the remote user name. If user is omitted, the logged in user ID is used.
    o workgroup is the name of the workgroup or the Windows domain in which the user name is defined.

    If the resource includes a workgroup, you must escape the semicolon that appears after the workgroup name to prevent it from being interpreted by the command shell. For instance, surround the entire resource name with double quotes: mount -F smbfs "//SALES;george@RSERVER" /mnt.

    mount-point

    The path to the location where the file system is to be mounted or unmounted. The mount command maintains a table of mounted file systems in the /etc/mnttab file. See the mnttab(4) man page.

     

    OPTIONS

    See the mount(1M) man page for the list of supported generic-options.

    -o name=value or
    -o name

    Sets the file system-specific properties. You can specify more than one name-value pair as a list of comma-separated pairs. No spaces are permitted in the list. The properties are as follows:

    dirperms=octaltriplet

    Specifies the permissions to be assigned to directories. The value must be specified as an octal triplet, such as 755. The default value for the directory mode adds the execute permission.

    Note that these permissions have no relation to the rights granted by the CIFS server.

    fileperms=octaltriplet

    Specifies the permissions to be assigned to files. The value must be specified as an octal triplet, such as 644. The default value for the file mode is taken from the mount point and adds the read permission.

    Note that these permissions have no relation to the rights granted by the CIFS server.

    gid=groupid

    Assigns the specified group ID to files. The default value is the group ID of the directory where the volume is mounted.

    intr|nointr

    Enable (or disable) cancellation of smbfs(7FS) I/O operations when the user interrupts the calling thread (for example, by hitting Ctrl-C while an operation is underway). The default is intr (interruption enabled), so cancellation is normally allowed.

    noprompt

    Suppresses the prompting for a password when mounting a share. This property enables you to permit anonymous access to a share. Anonymous access does not require a password.

    The mount operation fails if a password is required, the noprompt property is set, and no password is stored by the smbutil login command.

    retry_count=number

    Specifies the number of SMBFS retries to attempt before the connection is marked as broken. By default, 4 attempts are made.

    The retry_count property value set by the mount command overrides the global value set in SMF or the value set in your .nsmbrc file.

    timeout=seconds

    Specifies the CIFS request timeout. By default, the timeout is 15 seconds.

    The timeout property value set by the mount command overrides the global value set in SMF or the value set in your .nsmbrc file.

    uid=userid

    Assigns the specified user ID files. The default value is the owner ID of the directory where the volume is mounted.

    xattr|noxattr

    Enable (or disable) Solaris Extended Attributes in this mount point. This option defaults to xattr (enabled Extended Attributes), but note: if the CIFS server does not support CIFS "named streams", smbfs(7FS) forces this option to noxattr. When a mount has the noxattr option, attempts to use Solaris Extended attributes fail with EINVAL.

    -O

    Overlays mount. Allow the file system to be mounted over an existing mount point, making the underlying file system inaccessible. If a mount is attempted on a pre-existing mount point without setting this flag, the mount fails, producing the error "device busy."

     

    EXAMPLES

    Example 1 Verifying That an SMBFS File System Is Mounted

    The following example shows how to mount the /tmp share from the nano server on the local /mnt mount point. You must supply the password for the root user to successfully perform the mount operation.

    # mount -F smbfs //root@nano.sfbay/tmp /mnt
    Password:
    

    You can verify that the share is mounted in the following ways:

    o View the file system entry in the /etc/mnttab file.

    # grep root /etc/mnttab
    //root@nano.sfbay/tmp   /mnt    smbfs   dev=4900000     1177097833
    

    o View the output of the mount command.

    # mount | grep root
    /mnt on //root@nano.sfbay/tmp read/write/setuid/devices/dev=4900000 on
    Fri Apr 20 13:37:13 2007
    

    o View the output of the df /mnt command.

    # df /mnt
    /mnt               (//root@nano.sfbay/tmp): 3635872 blocks       -1 files
    

    Obtain information about the mounted share by viewing the output of the df -k /mnt command.

    # df -k /mnt
    Filesystem            kbytes    used   avail capacity  Mounted on
    //root@nano.sfbay/tmp
                         1882384   64448 1817936     4%    /mnt
    

    Example 2 Unmounting a CIFS Share

    This example assumes that a CIFS share has been mounted on the /mnt mount point. The following command line unmounts the share from the mount point.

    # umount /mnt
    

     

    FILES

    /etc/mnttab

    Table of mounted file systems.

    /etc/dfs/fstypes

    Default distributed file system type.

    /etc/vfstab

    Table of automatically mounted resources.

    $HOME/.nsmbrc

    User-settable mount point configuration file to store the description for each connection.

     

    ATTRIBUTES

    See the attributes(5) man page for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    AvailabilitySUNWsmbfscu

    Interface Stability

     

    SEE ALSO

    smbutil(1), mount(1M), mountall(1M), svcadm(1M), acl(2), fcntl(2), link(2), mknod(2), mount(2), symlink(2), umount(2), mnttab(4), nsmbrc(4), vfstab(4), attributes(5), pcfs(7FS), smbfs(7FS)  

    AUTHORS

    This manual page contains material originally authored by Boris Popov, bpATbutya.kz, bpATFreeBSD.org.  

    NOTES

    The Solaris CIFS client always attempts to use gethostbyname() to resolve host names. If the host name cannot be resolved, the CIFS client uses NetBIOS name resolution (NBNS). By default, the Solaris CIFS client permits the use of NBNS to enable Solaris CIFS clients in Windows environments to work without additional configuration.

    Since NBNS has been exploited in the past, you might want to disable it. To disable NBNS, set the nbns-enabled service management facility property to false. By default, nbns-enabled is set to true.

    If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the symbolic link refers, rather than being mounted on top of the symbolic link itself.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Operands
    OPTIONS
    EXAMPLES
    FILES
    ATTRIBUTES
    SEE ALSO
    AUTHORS
    NOTES


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру