The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

vicq ()
  • >> vicq (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    vicq - console ICQ2000 client
     
    

    SYNOPSIS

      vicq [-u UIN] [-rbo] [-c config] [-t delay]
    
    
    
     

    DESCRIPTION

    vicq is console icq2000 client, simmilar to micq  

    OPTIONS


    -u UIN
    When invoked with -u option, vicq expects to read single message from stdin and sends it to the specified UIN
    -c config
    Use alternative config instead of ~/.vicq/config
    -b
    Do not send contact list and visible/invisible list (use in a non-interactive mode)
    -o
    Do not request offline messages (use in a non-interactive mode)
    -t delay
    Delay between commands in non-interactive mode
    -r
    Register new UIN on startup
     

    Non-interactive mode

    You can use vicq in non-interactive mode by writing script and sending it on stdin of programm, for example:

     echo "msg gonzo/hi" | vicq -b -o
    
    
    
     or
    
    
    
     $cat > xx
     msg gonzo/hi
     msg gonzo 
     multi
     line
     message
     .
     ^D
     $cat xx | vicq -b -o -t 5
    
    
    
    On slow connections you must set delay between commands using -t option because some message disappears ( i dont sure that source of this problem slow connections, may be ICQ server drops flood messages)  

    CONFIGURATION

    Config file (~/.vicq/config) consists of several sections described below. Each section starts with header line like this: '[section_name]'. Lines starting with '#' are comments. You can split entire config in several files using 'include' directive. BUT! You should place whole section in one file, the section header should be placed in the same file. Example of using include you can find at http://www.gonzo.kiev.ua/projects/vicq/eg/  

    [options]

    The [options] section contains configuration variables. Each variable is in ``name=value'' format (case-sensitive).

    Configuration variables:

    uin (decimal)
    User's UIN
    password (string)
    User's password
    keep_config (decimal)
    If you dont want to save config on exit set this variable to 1: keep_config=1
    encoding (string)
    Valid values 'koi','win' and 'translit', depending on your terminal
    auto_info (integer)
    If not zero, vICQ will request info on every UIN which is not in ContactList automaticaly
    hide_ip (decimal)
    if not zero ICQ will not show your IP
    prompt (string)
    Main vICQ prompt template. The following variables will be parsed and may be used in prompt string:
     %S - by short description of your status
     %U - by your uin
     %h - current hour
     %m - current minute
     %s - current second
     %% - '%'

    Example:

     prompt=vICQ(%S)/%U[%h:%m:%s]E<gt>
    
    
    

    sms_phonebook (string)
    Path to external file with sms phones in [phones] section format. Section tag ('[phones]') is must for this file.
    separator_length (integer)
    Length of separator line
    disable_empty_separators (integer)
    if not equal to 0 disables separator without text
    history_entries (integer)
    Number of messages which displays in user history, if its negative - displays all history
    hide_ip (integer)
    Hide you real IP from other users
    mode (string)
    Valid values normal or silent. In silent mode status_change events does not appear on screen.
    status (string)
    Initial status. Valid values are:

     Online
     Free_For_Chat
     Away
     Not_Avalible
     Occupied
     Do_Not_Disturb
     Invisible
    
    
    

    colors (integer)
    If this is not 0, vicq will use colors.
    colored_history (integer)
    If this is not 0, vICQ use colors for history output(You can set you PAGER environment variable to less -R for using color)
    separator_color (string)
    Color of the separator line
    separator_title_color (string)
    Color for the title separator
    nick_color (string)
    Color for highlighting nicknames
    uin_color (string)
    Color for highlighting uins
    status_color (string)
    Color for highlighting status
    time_color (string)
    Color for highlighting time
    message_color (string)
    Message color
    their_history_color (string)
    Color for incoming events in history
    my_history_color (string)
    Color for outgoing events in history

    Valid colors are:

     NORMAL
     YELLOW
     MAGENTA
     WHITE
     BLACK
     RED
     GREEN
     BROWN
     BLUE
     CYAN
     LIGHT_CYAN
     LIGHT_RED
     LIGHT_GREEN
     LIGHT_BLUE
    
    
    
    And three text attributes for monochrome terminals:

     BOLD
     UNDERSCORE
     REVERSE
    
    
    

    player (string)
    Command for playing sounds (see [sounds] section) '%f' in player path will be replaced with filename chosen according to the [sounds] section

    Example:

     player=/path/to/player -f %f -o /dev/dsp
    
    
    

    browser (string)
    Command for browsing received URLs: '%u' in browser command will be replaced with last recieved url

    Example:

     browser=/path/to/browser -navigator %u
    
    
    

    https_proxy (integer)
    If not 0, vICQ with work through HTTPS-capable proxy
    socks_proxy (integer)
    If not 0, vICQ with work through SOCKS-capable proxy(v5 only available for this moment)
    proxy_host (string)
    HTTPS/SOCKS proxy host
    proxy_port (decimal)
    HTTPS/SOCKS proxy port
    proxy_login (string)
    Login for HTTPS/SOCKS proxy authorization (if ommited - don't use aythorization for SOCKS proxy)
    proxy_password (string)
    Password for HTTPS/SOCKS proxy authorization
    proxy_force_https_port (decimal)
    if 1, always connect to login.icq.com on port 443, regardless of what specified in the reconnection messages

    Example of HTTPS proxy configuration:

     https_proxy=1
     proxy_port=3128
     proxy_host=10.25.0.99
     proxy_force_https_port=1
    
    
    
    Example of SOCKS proxy configuration(without authorization):

     socks_proxy=1
     proxy_port=1080
     proxy_host=10.25.0.99
    
    
    

    log_path (string)
    Directory, which contains history files.

    Example:

     log_path=~/.vicq.log
    
    
    

    log_type (string)
    Specifies method which logs saves. Its a string if its empty - don't log, else calls methods correspondingly chars which appears in strings. Valid chars:

     a - log to <log_path>/vicq.log
     u - log to <log_path>/<uin>.log
     s - log status changes
     n - make newlines between log records
     l - make symlinks <nick>.log to <uin>.log
    
    
    
    Default: log_type=u.

    Example:

     log_type=usln
    
    
    

    micq_like_completion (decimal)
    If not 0 mICQ style completion is using: cicles through UINs used in previous msg commands
    autosplit (decimal)
    If not 0 messages longer than 450 chars will be splitted into several parts, otherwise - message will be truncated to 450 chars
     

    [aliases]

    The [aliases] section contains run-time options. Its format is 'alias=command'.

    Example:

     m=msg
    
    
    
     

    [phones]

    The [phones] section contains phonebook for SMS messages in 'nick phone' format. You can use these aliases in 'sms' command

    Example:

     squid +380xxxxx
     ReY +380xxxxxx
    
    
    
     

    [events]

    The [events] section contains events hooks. Its format is
     event[/nick][|my_status] command or
     [!][|]event[/nick][|my_status] ``command1'',``command2'' 

    where event is the type of event, nick_or_uin sender's nick or uin, my_status your status (all parameters could be glob-style wildcard), if optional parameters nick_or_uin or my_status is ommited then they acts as *(any). command is an command name to be executed when event occurs and event type, sender's info and your status matches specified parameters.! in the beggining means that hook is inactive. | in the beginning means that event does not break checking after match. The following variables will be parsed and may be used in 'command' string:
     %e - by type of event
     %u - by sender's uin
     %n - by sender's nick
     %t - by message text (or status value if type of event is 'status_change') Y ou can use uppercase modifiers to make them colored e.g.
     %E - colored type of event
     If you want run external command - use ! in command definition.

    Examples:

     * ! echo 'Event %e from %n(%u) : %t' | mail mymail@myhost.com
    
    
    
    (send email to mymail@myhost.com with the full description of the recieved event)

     text_message msg %u/i will read this message later
    
    
    
    (simple autoresponder)

     text_message|online msg %u/hi\nI am  online
     text_message/GonZo|away msg %u/hi GonZo\nI am away
    
    
    
    (extended autoresponder)

    List of events types:
     sms_delivery_receipt
     status_change
     URL
     sms_message
     contacts_request
     email_message
     text_message
     offline_text_message
     contacts
     add_message
     auth_request
     sms_response
     sms_message
     user_short_info
     user_info_not_found
     ack_offline
     set_permissions_ack
     user_info_unknown
     user_info_about
     user_info_main
     user_info_extra_emails
     set_main_info_ack
     wp_final_result_info
     wp_empty
     user_info_homepage
     wp_result_info
     user_info_past_background
     user_info_personal_interests  

    [sounds]

    Section [sounds] is similar to [events] section, allowing you to specify audio files played upon various incoming events. Playback will be done through the ``player'' application defined in the [option] section, with %f token substituted with the proper filename.  

    [contacts]

    [contacts] section lists UINs, format is the same as in .micqrc:

     UIN Nickname
    
    
    
    To add user to visible list add asterisk (*) before UIN (see vicqrc.example). If you want be invisible to user add tilde (~) before UIN. If you want create alias for UIN/Nick just add aliases in the line below UIN (see vicqrc.example)  

    INTERACTIVE OPERATIONS

     

    Completion & nick handling

    You can use TAB to complete command or nick, if your nicks contains spaces: use double quotes to handle this nicks eg:
     vICQ>msg "anri <TAB>  

    Messages handling


    msg nick|UIN [/msg]
    send an instant ICQ message
    sms nick|phone [/msg]
    send SMS to specified person
    r
    replie to last received message
    a
    send a message to the last person you sent a message
    auth nick | UIN
    send an authorization to specified UIN
    url nick | UIN [URL]
    send an URL to specified person
     

    Status managment


    online
    change status to 'Online'
    inv
    change status to 'Invisible'
    away
    change status to 'Away'
    na
    change status to 'Not availabe'
    occ
    change status to 'Occupied'
    dnd
    change status to 'Do Not Disturb'
    ffc
    change status to 'Free for chat'
    offline
    change status to 'Offline/Disconnect'
     

    Contact list managment


    add UIN nick
    add UIN as nick to contact list
    w
    display the current status of every person in your contact list
    e
    display the current status of every online person in your contact list
    togvis UIN | nick
    add/remove user to/from visible list
    toginvis UIN | nick
    add/remove user to/from invisible list
    history UIN | nick [count]
    display last count entries of the user's history. If count is negative shoes all entries
    finger UIN | nick
    display user's UIN, nick, current status, IP(and resolved host if available), dirrect connection info, and client version
     

    Miscellaneous commands


    help command
    display help on command
    ! OS command
    execute external command
    save
    save config
    info UIN | nick
    send user info request
    search email@host.domain
    searche for ICQ user
    silent
    toggle to silent mode - change status events does not displays
    normal
    toggle to normal mode - change status events displays
    view
    open last recieved URL with browser command
    set [key[=value]]
    shows/sets config variables values
    wpset
    set basic White Pages info
    clear
    clear screen
    alias [alias = ] [command]
     show/change command aliases, ex:
     alias q=quit
    
    
    

    last UIN | nickname
     Show last message from UIN or nickname
    
    
    

    echo string
     Sends to the output I<sting>. Use mainly in hooks
    
    
    

    permissions [+|-][web | auth]
     Set 'web aware/need authorization' on/off, ex:
     permissions +auth -web
    
    
    

    version
     Display current version of vICQ
    
    
    

    event [ on | off event_id] add event_spec
     activate/deactivate event  or add new event
    
    
    

    reg password
     register new UIN with specified password
    
    
    
     

    Message editing

    Input . in the empty line to end message or # to cancel message  

    AUTHOR

    Alexander Timoshenko <gonzo@ukrweb.net>


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    Non-interactive mode
    CONFIGURATION
    [options]
    [aliases]
    [phones]
    [events]
    [sounds]
    [contacts]
    INTERACTIVE OPERATIONS
    Completion & nick handling
    Messages handling
    Status managment
    Contact list managment
    Miscellaneous commands
    Message editing
    AUTHOR


    Поиск по тексту MAN-ов: 




    Спонсоры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2022 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру