The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации | Сети, протоколы, TCP/IP

TCP/IP FAQ; Frequently Asked Questions (1999-09) Part 2 of 2

Part 2 of a 2-part informational posting that contains responses to common questions on basic TCP/IP network protocols and applications.
Archive-name:      internet/tcp-ip/tcp-ip-faq/part2
Version:           5.15
Last-modified:     1999-09-06 20:11:43
Posting-Frequency: monthly (first Friday)
Maintainer:        tcp-ip-faq@eng.sun.com (Mike Oliver)
URL:               http://www.itprc.com/tcpipfaq/default.htm

TCP/IP Frequently Asked Questions

Part 2: Applications and Application Programming

This is Part 2 of the Frequently Asked Questions (FAQ) list for the
comp.protocols.tcp-ip Usenet newsgroup. The FAQ provides answers to a
selection of common questions on the various protocols (IP, TCP, UDP,
ICMP and others) that make up the TCP/IP protocol suite. It is posted
to the news.answers, comp.answers and comp.protocols.tcp-ip newsgroups
on or about the first Friday of every month.

The FAQ is posted in two parts. Part 1 contains answers to general
questions and questions that concern the fundamental components of the
suite. Part 2 contains answers to questions concerning common
applications that depend on the TCP/IP suite for their network
connectivity.

Comments on this document can be emailed to the FAQ maintainer at
<tcp-ip-faq@eng.sun.com>.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

Table of Contents

FAQ Part 2 -- Applications and Application Programming

What Are The Common TCP/IP Application Protocols?

  1. DHCP
  2. DNS
  3. FTP
  4. HTTP
  5. IMAP
  6. NFS
  7. NNTP
  8. NTP
  9. POP
 10. Rlogin
 11. Rsh
 12. SMTP
 13. SNMP
 14. Ssh
 15. Telnet
 16. X Window System

TCP/IP Programming

  1. What are sockets?
  2. How can I detect that the other end of a TCP connection has
     crashed?
  3. Can TCP keepalive timeouts be configured?
  4. Are there object-oriented network programming tools?

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

What Are The Common TCP/IP Application Protocols?

  1. DHCP

     Dynamic Host Configuration Protocol (DHCP) allows IP addresses to
     be allocated to hosts on an as-needed basis. The conventional
     scheme of allocating a permanent fixed IP address to every host is
     wasteful of addresses in situations where only a relatively small
     number of hosts are active at any given time. DHCP lets a host
     'borrow' an IP address from a pool of IP addresses; when the
     address is no longer needed it is recycled and made available for
     use by some other host. DHCP also allows a host to retrieve a
     variety of configuration information at the same time as it
     acquires an IP address.

     DCHP depends on UDP to carry packets between the client and server
     tasks.

     DHCP is defined by RFC's 2131 and 2132. A widely-used
     implementation of DHCP can be downloaded from
     <http://www.isc.org/dhcp.html>.

  2. DNS

     The Domain Name System (DNS) provides dynamic on-demand
     translation between human-readable names (like www.pizzahut.com)
     and the numeric addresses actually used by IP (like
     192.112.170.243). The basics of DNS operation are defined in RFC's
     1034, 1101, 1876, 1982 and 2065.

     DNS uses both UDP and TCP. It used UDP to carry simple queries and
     responses but depends on TCP to guarantee the correct and orderly
     delivery of large amounts of bulk data (eg transfers of entire
     zone configurations) across the network.

     DNS standards are discussed in the comp.protocols.dns.std
     newsgroup. A very widely-used implementation of DNS called BIND
     (Berkeley Internet Name Domain) is discussed in the
     comp.protocols.dns.bind newsgroup, and the BIND software itself
     can be downloaded from <http://www.isc.org/bind.html>. The
     operation and politics of DNS are discussed in the
     comp.protocols.tcp-ip.domains newsgroup.

  3. FTP

     File Transfer Protocol (FTP) provides a mechanism for moving data
     files between systems. In addition to the fundamental PUT and GET
     operations, FTP provides a small number of file management and
     user authentication facilities. The protocol is defined in RFC
     959.

     FTP depends on TCP to guarantee the correct and orderly delivery
     of data across the network.

  4. HTTP

     Hyper Text Transfer Protocol (HTTP) is the protocol used to move
     Web pages across an internet. Version 1.0 of HTTP is defined by
     RFC 1945.  Version 1.1 makes more efficient use of TCP and is
     defined by RFC 2068.

     HTTP depends on TCP to guarantee the correct and orderly delivery
     of data across the network.

  5. IMAP

     Interactive Mail Access Protocol (IMAP) allows clients to
     manipulate email messages and mailboxes that reside on some server
     machine. The current version of IMAP is Version 4, usually
     referred to as IMAP4.  IMAP4 is described by RFC 2060. IMAP
     provides no way of sending email; client programs that use IMAP to
     read mail usually use SMTP to send messages. IMAP is more powerful
     and more complex than the other widely-used mail-reading protocol
     POP.

     IMAP depends on TCP to guarantee the correct and orderly delivery
     of data across the network.

     IMAP is discussed in the comp.mail.imap newsgroup.

  6. NFS

     Network File System (NFS) allows files stored on one machine (the
     "server") to be accessed by other machines (the "clients") as
     though the files were actually present on the client systems. NFS
     is defined in terms of a Remote Procedure Call (RPC) abstraction
     which in turn formats its packets according to a
     processor-independent eXternal Data Representation (XDR).

     Version 2 of NFS is defined in RFC 1094 and Version 3 is defined
     in RFC 1813. The RPC mechanism most often used with NFS, ONC/RPC,
     is defined by RFC 1831. The XDR conventions used by ONC/RPC are
     defined by RFC 1832. The ONC/RPC binding mechanism (a minimal
     directory service which allows RPC clients to rendezvous with RPC
     servers) is defined by RFC 1833.

     NFS can run over any kind of transport, but is most often used
     over UDP. UDP does not guarantee packet delivery or ordering, so
     when NFS runs over UDP the RPC implementation must provide its own
     guarantees of correctness. When NFS runs over TCP, the RPC layer
     can depend on TCP to provide this kind of correctness.

     NFS is discussed in the comp.protocols.nfs newsgroup.

  7. NNTP

     Network News Transfer Protocol (NNTP) is used to propagate netnews
     postings (including Usenet postings) between systems. It is
     defined in RFC 977. (The format of netnews messages is defined in
     RFC 1036.)

     NNTP depends on TCP to guarantee the correct and orderly delivery
     of data across the network.

     NNTP is discussed in the news.software.nntp newsgroup. A very
     widely-used implementation of NNTP called INN (InterNet News) can
     be downloaded from <http://www.isc.org/inn.html>.

  8. NTP

     Network Time Protocol (NTP) is used to synchronise time-of-day
     clocks between various computer systems. The current version of
     NTP is Version 3, defined in RFC 1305. Earlier versions (2 and 1
     respectively) of the protocol are defined in RFC's 1119 and 1059.
     David Mills maintains a publically-available implementation of NTP
     server and clients along with a comprehensive collection of NTP
     documentation on the web at <http://www.eecis.udel.edu/%7Entp/>.

     NTP depends on UDP to carry packets between server and client
     tasks.

     NTP is discussed in the comp.protocols.time.ntp newsgroup.

  9. POP

     Post Office Protocol (POP) allows clients to read and remove email
     from a mailbox that resides on some server machine. The current
     version of POP is Version 3, usually referred to as POP3. It is
     described by RFC 1939. POP provides no way of sending email;
     client programs that use POP to read mail usually use SMTP to send
     messages. POP is simpler and less powerful than the other
     widely-used mail-reading protocol IMAP.

     POP depends on TCP to guarantee the correct and orderly delivery
     of data across the network.

     POP doesn't have its own dedicated newsgroup. It is sometimes
     discussed in client-specific newsgroups in the comp.mail.*
     hierarchy.

 10. Rlogin

     Remote Login (rlogin) provides a network terminal or "remote
     login" capability. Rlogin is similar to Telnet but it adds a
     couple of features that make it a little more convenient than
     Telnet.

     Rlogin is one of the so-called Berkeley r-commands, (where the "r"
     stands for "remote") a family of commands created at UC Berkeley
     during the development of BSD Unix to provide access to remote
     systems in ways that are more convenient than the original TCP/IP
     commands.

     The most obvious convenience is that rlogin, like other
     r-commands, examines a .rhosts (pronounced "dot ar hosts") file on
     the server side to authenticate logins based on the client host
     address. The .rhosts file can be constructed to allow remote
     access without requiring you to enter a password. If used
     improperly this feature can be a security threat, but if used
     correctly it can actually enhance security by not requiring a
     password to be sent over the network where it might be read by a
     packet sniffer.

     The r-commands depend on TCP to guarantee the correct and orderly
     delivery of data across the network.

 11. Rsh

     Remote Shell (rsh) is an r-command that provides for remote
     execution of arbitrary commands. It allows you to run a command on
     a server without having to actually log in on the server. More
     importantly it allows you to feed data to the remote command and
     retrieve the command's output without having to stage the data
     through temporary files on the server.

     Like other Berkeley r-commands, rsh uses the .rhosts file on the
     server side to authenticate access based on the client's host
     address.

     On some non-BSD systems the Remote Shell command is named remsh
     because by the time the command was delivered on those systems the
     usual rsh name had been used for a "restricted shell" application,
     a command line interpreter intended to boost security by
     preventing its users from performing certain activities.

     On Unix systems most of the work of rsh is handled by the rcmd(3)
     library function, so if you're writing a program that needs
     rsh-like functionality then you might be able to use that
     function. However, since the rsh protocol requires the client to
     use a privileged port you'll only be able to use rcmd(3) if your
     program executes with superuser privileges. That's why the rsh
     executable is setuid-root on Unix machines.

     If your program will not run as root then you might be able to use
     the rexec(3) function instead. rexec(3) does not use the
     server-side .rhosts file. Instead it requires the client to supply
     an account password which is then transmitted unencrypted over the
     network.

 12. SMTP

     Simple Mail Transfer Protocol (SMTP) is used to deliver email from
     one system to another. The basic SMTP is defined in RFC 821 and
     the format of Internet mail messages is described in RFC 822.

     SMTP depends on TCP to guarantee the correct and orderly delivery
     of data across the network.

     A very widely-used implementation of SMTP called sendmail can be
     downloaded from <http://www.sendmail.org/>. Other open-source SMTP
     implementations include qmail (available at
     <http://www.qmail.org/>) postfix (available at
     <http://www.postfix.org/>), smail (available at
     <ftp://ftp.planix.com/pub/Smail/>), exim (available at
     <http://www.exim.org/>) and smtpd (available at
     <http://www.obtuse.com/smtpd.html>).

 13. SNMP

     Simple Network Management Protocol (SNMP) provides a means of
     monitoring and managing systems over a network. SNMP defines a
     method of sending queries (the GET and GET-NEXT primitives) and
     commands (the SET primitive) from a management station client to
     an agent server running on the target system, and collecting
     responses and unsolicited event notifications (the TRAP
     primitive).

     Version 1 of SNMP is defined by RFC's 1098 and 1157. SNMP Version
     2 is defined by RFC's 1441, 1445, 1446, 1447 and 1901 through
     1909. The various things that can be monitored and managed by
     SNMP, collectively called the Management Information Base (MIB)
     are defined in dozens of additional RFC's.

     SNMP sends traffic through UDP because of its relative simplicity
     and low overhead.

     SNMP is discussed in the comp.protocols.snmp newsgroup.

 14. Ssh

     Secure Shell (ssh) provides remote login and execution features
     similar to those of the rsh and rlogin r-commands, but ssh
     encrypts the data that is exchanged over the network. Encryption
     can protect sensitive information, and it is not uncommon for
     security-conscious administrators to disable plain rsh and telnet
     services in favour of ssh.

     The SSH protocol used by the ssh command has also been used to
     build a secure file transfer application which can be used as an
     alternative to FTP for sensitive data.

     Complete information on ssh and its SSH protocol can be found at
     <http://www.ssh.fi/>.

 15. Telnet

     Telnet provides a network terminal or "remote login" capability.
     The Telnet server accepts data from the telnet client and forwards
     them to the operating system in such a way that the received
     characters are treated as though they had been typed at a terminal
     keyboard. Responses generated by the server operating system are
     passed back to the Telnet client for display.

     The Telnet protocol provides the ability to negotiate many kinds
     of terminal-related behaviour (local vs. remote echoing, line mode
     vs.  character mode and others) between the client and server. The
     basic Telnet protocol is defined in RFC's 818 and 854 and the
     option negotiation mechanism is described in RFC 855.

     Specific Telnet options, implementation issues and protocol quirks
     are discussed in several dozen RFC's dating back to 1971. (That's
     RFC's 97, 137, 139, 206, 215, 216, 318, 328, 340, 393, 435, 466,
     495, 513, 559, 560, 562, 563, 581, 587, 595, 596, 652, 653, 654,
     655, 656, 657, 658, 698, 726, 727, 728, 732, 735, 736, 748, 749,
     779, 856, 857, 858, 859, 860, 861, 885, 927, 933, 946, 1041, 1043,
     1053, 1073, 1079, 1091, 1096, 1097, 1143, 1184, 1205, 1372, 1408,
     1411, 1412, 1416, 1571, 1572 and 2066, and that's not counting
     obsolete ones. A couple of these are not entirely serious.) As you
     might infer from this pedigree, Telnet is a widely-deployed and
     well-used protocol.

     Telnet depends on TCP to guarantee the correct and orderly
     delivery of data between the client and server.

 16. X Window System

     The X Window System (X11R6 is the most recent incarnation) allows
     client programs running on one machine to control the graphic
     display, keyboard and mouse of some other machine or of a
     dedicated X display terminal.

     X depends on TCP to guarantee the correct and orderly delivery of
     data across the network.

     The X Window System is discussed in the comp.windows.x newsgroup.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

TCP/IP Programming

  1. What are sockets?

     A socket is an abstraction that represents an endpoint of
     communication. Most applications that consciously use TCP and UDP
     do so by creating a socket of the appropriate type and then
     performing a series of operations on that socket. The operations
     that can be performed on a socket include control operations (such
     as associating a port number with the socket, initiating or
     accepting a connection on the socket, or destroying the socket)
     data transfer operations (such as writing data through the socket
     to some other application, or reading data from some other
     application through the socket) and status operations (such as
     finding the IP address associated with the socket).

     The complete set of operations that can be performed on a socket
     constitutes the Sockets API (Application Programming Interface).
     If you are interested in writing programs that use TCP/IP then
     you'll probably need to use and understand the sockets API. Your
     system manuals may have a description of the API (try `man socket'
     if you're using a Unix system) and many books devote chapters to
     it. A FAQ list for sockets programming is available on the Web
     from its Canadian home at <http://www.ibrado.com/sock-faq/>, from
     a UK mirror at <http://kipper.york.ac.uk/%7Evic/sock-faq/> or by
     anonymous FTP from
     <ftp://rtfm.mit.edu/pub/usenet/news.answers/unix-faq/socket>.

     The TLI (Transport Layer Interface) API provides an alternative
     programming interface to TCP/IP on some systems, notably those
     based on AT&T's System V Unix. The Open Group, a Unix standards
     body, defines a variation of TLI called XTI (X/Open Transport
     Interface). Note that both sockets and TLI (and XTI) are
     general-purpose facilities and are defined to be completely
     independent of TCP/IP. TCP/IP is just one of the protocol families
     that can be accessed through these API's.

  2. How can I detect that the other end of a TCP connection has
     crashed?  Can I use "keepalives" for this?

     Detecting crashed systems over TCP/IP is difficult. TCP doesn't
     require any transmission over a connection if the application
     isn't sending anything, and many of the media over which TCP/IP is
     used (e.g.  Ethernet) don't provide a reliable way to determine
     whether a particular host is up. If a server doesn't hear from a
     client, it could be because it has nothing to say, some network
     between the server and client may be down, the server or client's
     network interface may be disconnected, or the client may have
     crashed. Network failures are often temporary (a thin Ethernet
     will appear down while someone is adding a link to the daisy
     chain, and it often takes a few minutes for new routes to
     stabilize when a router goes down) and TCP connections shouldn't
     be dropped as a result.

     Keepalives are a feature of the sockets API that requests that an
     empty packet be sent periodically over an idle connection; this
     should evoke an acknowledgement from the remote system if it is
     still up, a reset if it has rebooted, and a timeout if it is down.
     These are not normally sent until the connection has been idle for
     a few hours. The purpose isn't to detect a crash immediately, but
     to keep unnecessary resources from being allocated forever.

     If more rapid detection of remote failures is required, this
     should be implemented in the application protocol. There is no
     standard mechanism for this, but an example is requiring clients
     to send a "no-op" message every minute or two. An example protocol
     that uses this is X Display Manager Control Protocol (XDMCP), part
     of the X Window System, Version 11; the XDM server managing a
     session periodically sends a Sync command to the display server,
     which should evoke an application-level response, and resets the
     session if it doesn't get a response (this is actually an example
     of a poor implementation, as a timeout can occur if another client
     "grabs" the server for too long).

  3. Can the TCP keepalive timeouts be configured?

     This varies by operating system. There is a program that works on
     many Unices (though not Linux or Solaris), called netconfig, that
     allows one to do this and documents many of the variables. It is
     available by anonymous FTP from
     <ftp://cs.ucsd.edu:/pub/csl/Netconfig/netconfig2.2.tar.Z>.

     In addition, Richard Stevens' TCP/IP Illustrated, Volume 1
     includes a good discussion of setting the most useful variables on
     many platforms.

  4. Are there object-oriented network programming tools?

     Yes. One such system is the ADAPTIVE Communication Environment
     (ACE).  The README file for ACE is available on the Web at
     <http://www.cs.wustl.edu/%7Eschmidt/ACE.html>. All software and
     documentation is available via both anonymous ftp and the Web.

     ACE is available for anonymous ftp from
     <ftp://ics.uci.edu/gnu/C++_wrappers.tar.Z>. That's a compressed
     tar archive approximately 500KB in size. This release contains
     contains the source code, documentation, and example test drivers
     for C++ wrapper libraries.

  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

This compilation contains the opinions of the FAQ maintainer and the
various FAQ contributors. Any resemblance to the opinions of the FAQ
maintainer's employer is entirely coincidental.

Copyright (C) Mike Oliver 1997-1999. All Rights Reserved.



Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру