The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

7.3. IP Accounting (for Linux-2.0)

The IP accounting features of the Linux kernel allow you to collect and analyze some network usage data. The data collected comprises the number of packets and the number of bytes accumulated since the figures were last reset. You may specify a variety of rules to categorize the figures to suit your purpose. This option has been removed in kernel 2.1.102 because the old ipfwadm-based firewalling was replaced by ``ipfwchains''.

Kernel Compile Options:
	Networking options  --->
	    [*] IP: accounting

After you have compiled and installed the kernel, you need to use the ipfwadm command to configure IP accounting. There are many different ways of breaking down the accounting information. I've picked a simple example of what might be useful. You should read the ipfwadm man page for more information.

Scenario: You have a ethernet network that is linked to the Internet via a PPP link. On the ethernet, you have a machine that offers a number of services. You are interested in knowing how much traffic is generated by each of ftp (and world wide web traffic), as well as total tcp and udp traffic.

You might use a command set that looks like the following (shown as a shell script):

	#!/bin/sh
	#
	# Flush the accounting rules
	ipfwadm -A -f
	#
	# Set shortcuts
	localnet=44.136.8.96/29
	any=0/0
	# Add rules for local ethernet segment
	ipfwadm -A in  -a -P tcp -D $localnet ftp-data
	ipfwadm -A out -a -P tcp -S $localnet ftp-data
	ipfwadm -A in  -a -P tcp -D $localnet www
	ipfwadm -A out -a -P tcp -S $localnet www
	ipfwadm -A in  -a -P tcp -D $localnet
	ipfwadm -A out -a -P tcp -S $localnet
	ipfwadm -A in  -a -P udp -D $localnet
	ipfwadm -A out -a -P udp -S $localnet
	#
	# Rules for default
	ipfwadm -A in  -a -P tcp -D $any ftp-data
	ipfwadm -A out -a -P tcp -S $any ftp-data
	ipfwadm -A in  -a -P tcp -D $any www
	ipfwadm -A out -a -P tcp -S $any www
	ipfwadm -A in  -a -P tcp -D $any
	ipfwadm -A out -a -P tcp -S $any
	ipfwadm -A in  -a -P udp -D $any
	ipfwadm -A out -a -P udp -S $any
	#
	# List the rules
	ipfwadm -A -l -n
	#

The names ``ftp-data'' and ``www'' refer to lines in /etc/services. The last command lists each of the Accounting rules and displays the collected totals.

An important point to note when analyzing IP accounting is that totals for all rules that match will be incremented. To obtain differential figures, you need to perform appropriate maths. For example, if I wanted to know how much data was not ftp or www, I would subtract the individual totals from the rule that matches all ports.

root# ipfwadm -A -l -n
IP accounting rules
 pkts bytes dir prot source               destination          ports
    0     0 in  tcp  0.0.0.0/0            44.136.8.96/29       * -> 20
    0     0 out tcp  44.136.8.96/29       0.0.0.0/0            20 -> *
   10  1166 in  tcp  0.0.0.0/0            44.136.8.96/29       * -> 80
   10   572 out tcp  44.136.8.96/29       0.0.0.0/0            80 -> *
  252 10943 in  tcp  0.0.0.0/0            44.136.8.96/29       * -> *
  231 18831 out tcp  44.136.8.96/29       0.0.0.0/0             * -> *
    0     0 in  udp  0.0.0.0/0            44.136.8.96/29       * -> *
    0     0 out undp  44.136.8.96/29       0.0.0.0/0            * -> *
    0     0 in  tcp  0.0.0.0/0            0.0.0.0/0            * -> 20
    0     0 out tcp  0.0.0.0/0            0.0.0.0/0            20 -> *
   10  1166 in  tcp  0.0.0.0/0            0.0.0.0/0            * -> 80
   10   572 out tcp  0.0.0.0/0            0.0.0.0/0            80 -> *
  253 10983 in  tcp  0.0.0.0/0            0.0.0.0/0            * -> *
  231 18831 out tcp  0.0.0.0/0            0.0.0.0/0            * -> *
    0     0 in  udp  0.0.0.0/0            0.0.0.0/0            * -> *
    0     0 out udp  0.0.0.0/0            0.0.0.0/0            * -> *

7.3.1. IP Accounting (for Linux-2.2)

The new accounting code is accessed via ``IP Firewall Chains''. See the IP chains home page for more information. You'll now need to use ipchains instead of ipfwadm to configure your filters. (From Documentation/Changes in the latest kernel sources).




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру