A 2.2.16 series (or later) Linux kernel source tree
An appropriate set of module utilities
gcc version 2.7.x or later
If you are building the ACP Modem driver along with the user space application, you need to have a complete Linux source tree for your kernel, not just an up-to-date kernel image.
Use tar xzvf mwavem-yyyymmdd.tar.gz to unpack the distribution.
Change directories with cd mwavem-yyyymmdd
Use the ./configure command to configure the build options. Issue ./configure --help to view all of the options. The defaults are probably okay though.
As of mwavem-1.0.3 you must give ./configure the --enable-mwavedd argument in order to build the driver with the user space application.
Use the make command to build all of the ACP Modem binaries.
Your gcc package should be at least at the 2.7.x level. Check your /usr/src/linux/Documentation/Changes file for the minimum version information.
Use make install to install the mwavem binary, mwavem.conf configuration, the extra binary (mostly .dsp) files, and module device driver (if you specified that it must be built) and to create the /dev/modems/mwave device node.
In the [WORLDTRADE] section of your mwavem.conf file, set the Country= parameter to your country access code.
The mwavem.conf file is installed in the /usr/local/etc directory unless you specified otherwise during the build process
Country information (including access codes) are listed in the mwavem.conf file. For example, for France the following section is present:
[Telephony\Country List\33] CountryCode=00000021 Name=France SameAreaRule=0FG LongDistanceRule=0FG InternationsalRule=00EFG
To set France to be your configured country in the [WORLDTRADE] section of mwavem.conf,
An initialization script has been provided which may be used to to start, stop, or check the status of the ACP Modem driver and application. It has been successfully run on the Debian, Slackware, SuSE, and Red Hat distributions and should run on any of their derivitives. If you are using the runtime script, it will load the mwave device driver module, configure the serial port, and start the mwave manager for you. All of the options which can be passed to the device driver module, along with some options for the script itself, can be configured by uncommenting and editing the appropriate variables at the beginning of the script.
The mwaved startup script can be found in the src/mwavem directory of the source distribution. If you are running the Red Hat distribution, you can copy the script to your /etc/rc.d/init.d directory and issue the ntsysv command in order to enable it at boot time. If not using Red Hat, see the documentation for your distribution for information on how to set this up to run at boot time.
It is recommended that you use the provided mwaved script. If you are not using the script, however, the following sections will describe how to manually start the device driver and application.
To load the mwave device driver use
The following arguments may be supplied with the insmod command:
The following arguments are not persistent from boot to boot (i.e. We are not saving them in the BIOS).
This parameter allows you to configure the IRQ used by the DSP if the DSP IRQ was not set and stored in BIOS by the Thinkpad™ configuration utility.
This parameter allows you to configure the I/O range used by the DSP if the DSP I/O range was not set and stored in the BIOS by the Thinkpad™ configuration utility.
This parameter allows you to configure the IRQ used by the ACP UART if the Mwave's UART IRQ was not set and stored in BIOS by the Thinkpad™ configuration utility.
This parameter allows you to configure the I/O range used by the ACP UART if the UART I/O range was not set and stored in BIOS by the Thinkpad™ configuration utility.
The following code is an example of how to run DSP using ttyS1 resources:
insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8
The mwave is unable to check for resource conflicts. It is your responsibility to ensure that none of the resources specified conflict with other (commonly PCMCIA) devices.
You can use the tpctl package on Linux or the Thinkpad™ configuration utility on Windows NT or DOS to manage the configuration of Thinkpad™ related resources.
Once the ACP device driver is loaded successfully, use the mwavem command to execute the application.
The location of the mwavem.conf file can be specified as an argument to the mwavem application. If not specified the default location is assumed to be /usr/local/etc/mwavem.conf unless otherwise changed during the build process.
Setup the serial driver to recognize the UART provided by the ACP driver.
setserial /dev/ttyS0 autoconfig
Substitute /dev/ttyS0 to match the serial port you have configured the DSP to use.
You may wish to create a symbolic link from your modem device to your serial device for convenience. Example: ln -s /dev/ttyS0 /dev/modem
The ACP Modem is now available for use by your favorite dialing application.
|General Information and Hardware Requirements||Resolving Installation and Configuration Problems|
Закладки на сайте
Проследить за страницей
Created 1996-2023 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру