Author: Antoniu Miclaus <antoniu.miclaus@analog.com>
Date: Tue Jul 2 11:18:50 2024 +0300
ABI: testing: fix admv8818 attr description
[ Upstream commit 7d34b4ad8cd2867b130b5b8d7d76d0d6092bd019 ]
Fix description of the filter_mode_available attribute by pointing to
the correct name of the attribute that can be written with valid values.
Fixes: bf92d87d7c67 ("iio:filter:admv8818: Add sysfs ABI documentation")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20240702081851.4663-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Clément Léger <cleger@rivosinc.com>
Date: Mon Aug 26 12:16:44 2024 +0200
ACPI: CPPC: Fix MASK_VAL() usage
[ Upstream commit 60949b7b805424f21326b450ca4f1806c06d982e ]
MASK_VAL() was added as a way to handle bit_offset and bit_width for
registers located in system memory address space. However, while suited
for reading, it does not work for writing and result in corrupted
registers when writing values with bit_offset > 0. Moreover, when a
register is collocated with another one at the same address but with a
different mask, the current code results in the other registers being
overwritten with 0s. The write procedure for SYSTEM_MEMORY registers
should actually read the value, mask it, update it and write it with the
updated value. Moreover, since registers can be located in the same
word, we must take care of locking the access before doing it. We should
potentially use a global lock since we don't know in if register
addresses aren't shared with another _CPC package but better not
encourage vendors to do so. Assume that registers can use the same word
inside a _CPC package and thus, use a per _CPC package lock.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://patch.msgid.link/20240826101648.95654-1-cleger@rivosinc.com
[ rjw: Dropped redundant semicolon ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aleksandr Mishin <amishin@t-argos.ru>
Date: Wed Jul 31 01:53:39 2024 +0300
ACPI: PMIC: Remove unneeded check in tps68470_pmic_opregion_probe()
[ Upstream commit 07442c46abad1d50ac82af5e0f9c5de2732c4592 ]
In tps68470_pmic_opregion_probe() pointer 'dev' is compared to NULL which
is useless.
Fix this issue by removing unneeded check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e13452ac3790 ("ACPI / PMIC: Add TI PMIC TPS68470 operation region driver")
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240730225339.13165-1-amishin@t-argos.ru
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Werner Sembach <wse@tuxedocomputers.com>
Date: Tue Sep 10 11:40:06 2024 +0200
ACPI: resource: Add another DMI match for the TongFang GMxXGxx
commit a98cfe6ff15b62f94a44d565607a16771c847bc6 upstream.
Internal documentation suggest that the TUXEDO Polaris 15 Gen5 AMD might
have GMxXGxX as the board name instead of GMxXGxx.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240910094008.1601230-1-wse@tuxedocomputers.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Li Chen <me@linux.beauty>
Date: Sat Aug 3 16:13:18 2024 +0800
ACPI: resource: Do IRQ override on MECHREV GM7XG0M
commit b53f09ecd602d7b8b7da83b0890cbac500b6a9b9 upstream.
Listed device need the override for the keyboard to work.
Fixes: 9946e39fe8d0 ("ACPI: resource: skip IRQ override on AMD Zen platforms")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Li Chen <me@linux.beauty>
Link: https://patch.msgid.link/87y15e6n35.wl-me@linux.beauty
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Thomas Weißschuh <linux@weissschuh.net>
Date: Tue Jul 9 22:37:24 2024 +0200
ACPI: sysfs: validate return type of _STR method
commit 4bb1e7d027413835b086aed35bc3f0713bc0f72b upstream.
Only buffer objects are valid return values of _STR.
If something else is returned description_show() will access invalid
memory.
Fixes: d1efe3c324ea ("ACPI: Add new sysfs interface to export device description")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240709-acpi-sysfs-groups-v2-1-058ab0667fa8@weissschuh.net
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Esther Shimanovich <eshimanovich@chromium.org>
Date: Tue Aug 6 20:08:47 2024 +0000
ACPI: video: force native for Apple MacbookPro9,2
[ Upstream commit 7dc918daaf2994963690171584ba423f28724df5 ]
It used to be that the MacbookPro9,2 used its native intel backlight
device until the following commit was introduced:
commit b1d36e73cc1c ("drm/i915: Don't register backlight when another
backlight should be used (v2)")
This commit forced this model to use its firmware acpi_video backlight
device instead.
That worked fine until an additional commit was added:
commit 92714006eb4d ("drm/i915/backlight: Do not bump min brightness
to max on enable")
That commit uncovered a bug in the MacbookPro 9,2's acpi_video
backlight firmware; the backlight does not come back up after resume.
Add DMI quirk to select the working native intel interface instead
so that the backlight successfully comes back up after resume.
Fixes: 92714006eb4d ("drm/i915/backlight: Do not bump min brightness to max on enable")
Signed-off-by: Esther Shimanovich <eshimanovich@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240806-acpi-video-quirk-v1-1-369d8f7abc59@chromium.org
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Orlando Chamberlain <orlandoch.dev@gmail.com>
Date: Fri Jul 5 13:56:24 2024 +0000
ACPI: video: force native for some T2 macbooks
[ Upstream commit d010a0282e045f02895f88299e5442506585b46c ]
The intel backlight is needed for these, previously users had nothing in
/sys/class/backlight.
Signed-off-by: Orlando Chamberlain <orlandoch.dev@gmail.com>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/3DA0EAE3-9EB7-492B-96FC-988503BBDCCC@live.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 7dc918daaf29 ("ACPI: video: force native for Apple MacbookPro9,2")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Tue Apr 2 21:12:40 2024 -0700
ACPICA: executer/exsystem: Don't nag user about every Stall() violating the spec
[ Upstream commit c82c507126c9c9db350be28f14c83fad1c7969ae ]
ACPICA commit 129b75516fc49fe1fd6b8c5798f86c13854630b3
Stop nagging user about every Stall() that violates the spec
On my Dell XPS 15 7590 I get hundreds of these warnings after few hours of
uptime:
$ dmesg | grep "fix the firmware" | wc -l
261
I cannot fix the firmware and I doubt that Dell cares about 4 year old
laptop either
Fixes: ace8f1c54a02 ("ACPICA: executer/exsystem: Inform users about ACPI spec violation")
Link: https://github.com/acpica/acpica/commit/129b7551
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasily Khoruzhick <anarsoul@gmail.com>
Date: Tue Apr 2 21:09:45 2024 -0700
ACPICA: Implement ACPI_WARNING_ONCE and ACPI_ERROR_ONCE
[ Upstream commit 632b746b108e3c62e0795072d00ed597371c738a ]
ACPICA commit 2ad4e6e7c4118f4cdfcad321c930b836cec77406
In some cases it is not practical nor useful to nag user about some
firmware errors that they cannot fix. Add a macro that will print a
warning or error only once to be used in these cases.
Link: https://github.com/acpica/acpica/commit/2ad4e6e7
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: c82c507126c9 ("ACPICA: executer/exsystem: Don't nag user about every Stall() violating the spec")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuntao Liu <liuyuntao12@huawei.com>
Date: Thu Aug 15 09:13:12 2024 +0000
ALSA: hda: cs35l41: fix module autoloading
[ Upstream commit 48f1434a4632c7da1a6a94e159512ebddbe13392 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from spi_device_id table.
Fixes: 7b2f3eb492da ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815091312.757139-1-liuyuntao12@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Virag <virag.david003@gmail.com>
Date: Sat Jul 13 19:58:32 2024 +0200
arm64: dts: exynos: exynos7885-jackpotlte: Correct RAM amount to 4GB
[ Upstream commit d281814b8f7a710a75258da883fb0dfe1329c031 ]
All known jackpotlte variants have 4GB of RAM, let's use it all.
RAM was set to 3GB from a mistake in the vendor provided DTS file.
Fixes: 06874015327b ("arm64: dts: exynos: Add initial device tree support for Exynos7885 SoC")
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240713180607.147942-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Wed Aug 21 12:28:34 2024 +0800
arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
commit 3079fb09ddac159bd8bb87f6f15b924e265f8d4d upstream.
The DPI display interface feeds the external display pipeline. However
the pipeline representation is currently incomplete. Efforts are still
under way to come up with a way to represent the "creative" repurposing
of the DP bridge chip's internal output mux, which is meant to support
USB type-C orientation changes, to output to one of two type-C ports.
Until that is finalized, the external display can't be fully described,
and thus won't work. Even worse, the half complete graph potentially
confuses the OS, breaking the internal display as well.
Disable the external display interface across the whole Corsola family
until the DP / USB Type-C muxing graph binding is ready.
Reported-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Closes: https://lore.kernel.org/linux-mediatek/38a703a9-6efb-456a-a248-1dd3687e526d@gmail.com/
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240821042836.2631815-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Date: Thu Jul 25 09:22:43 2024 +0200
arm64: dts: mediatek: mt8186: Fix supported-hw mask for GPU OPPs
[ Upstream commit 2317d018b835842df0501d8f9e9efa843068a101 ]
The speedbin eFuse reads a value 'x' from 0 to 7 and, in order to
make that compatible with opp-supported-hw, it gets post processed
as BIT(x).
Change all of the 0x30 supported-hw to 0x20 to avoid getting
duplicate OPPs for speedbin 4, and also change all of the 0x8 to
0xcf because speedbins different from 4 and 5 do support 900MHz,
950MHz, 1000MHz with the higher voltage of 850mV, 900mV, 950mV
respectively.
Fixes: f38ea593ad0d ("arm64: dts: mediatek: mt8186: Wire up GPU voltage/frequency scaling")
Link: https://lore.kernel.org/r/20240725072243.173104-1-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Wed Jul 31 11:44:08 2024 +0800
arm64: dts: mediatek: mt8195-cherry: Mark USB 3.0 on xhci1 as disabled
commit 09d385679487c58f0859c1ad4f404ba3df2f8830 upstream.
USB 3.0 on xhci1 is not used, as the controller shares the same PHY as
pcie1. The latter is enabled to support the M.2 PCIe WLAN card on this
design.
Mark USB 3.0 as disabled on this controller using the
"mediatek,u3p-dis-msk" property.
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> #KernelCI
Closes: https://lore.kernel.org/all/9fce9838-ef87-4d1b-b3df-63e1ddb0ec51@notapiano/
Fixes: b6267a396e1c ("arm64: dts: mediatek: cherry: Enable T-PHYs and USB XHCI controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240731034411.371178-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Fri Aug 2 15:09:50 2024 +0800
arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
[ Upstream commit 51bc68debab9e30b50c6352315950f3cfc309b32 ]
The clocks for dp_intf* device nodes are given in the wrong order,
causing the binding validation to fail.
Fixes: 6c2503b5856a ("arm64: dts: mt8195: Add dp-intf nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240802070951.1086616-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Wed Jul 31 11:44:09 2024 +0800
arm64: dts: mediatek: mt8395-nio-12l: Mark USB 3.0 on xhci1 as disabled
commit be985531a5dd9ca50fc9f3f85b8adeb2a4a75a58 upstream.
USB 3.0 on xhci1 is not used, as the controller shares the same PHY as
pcie1. The latter is enabled to support the M.2 PCIe WLAN card on this
design.
Mark USB 3.0 as disabled on this controller using the
"mediatek,u3p-dis-msk" property.
Fixes: 96564b1e2ea4 ("arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240731034411.371178-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qingqing Zhou <quic_qqzhou@quicinc.com>
Date: Thu Jul 25 12:51:17 2024 +0530
arm64: dts: qcom: sa8775p: Mark APPS and PCIe SMMUs as DMA coherent
commit 421688265d7f5d3ff4211982e7231765378bb64f upstream.
The SMMUs on sa8775p are cache-coherent. GPU SMMU is marked as such,
mark the APPS and PCIe ones as well.
Fixes: 603f96d4c9d0 ("arm64: dts: qcom: add initial support for qcom sa8775p-ride")
Fixes: 2dba7a613a6e ("arm64: dts: qcom: sa8775p: add the pcie smmu node")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Qingqing Zhou <quic_qqzhou@quicinc.com>
Rule: add
Link: https://lore.kernel.org/stable/20240723075948.9545-1-quic_qqzhou%40quicinc.com
Link: https://lore.kernel.org/r/20240725072117.22425-1-quic_qqzhou@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Thu Aug 29 15:03:28 2024 +0300
arm64: dts: qcom: x1e80100: Fix PHY for DP2
[ Upstream commit ba728bda663b0e812cb20450d18af5d0edd803a2 ]
The actual PHY used by MDSS DP2 is the USB SS2 QMP one. So switch to it
instead. This is needed to get external DP support on boards like CRD
where the 3rd Type-C USB port (right-hand side) is connected to DP2.
Fixes: 1940c25eaa63 ("arm64: dts: qcom: x1e80100: Add display nodes")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240829-x1e80100-dts-dp2-use-qmpphy-ss2-v1-1-9ba3dca61ccc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Tue Jul 30 13:24:34 2024 +0100
arm64: dts: renesas: r9a07g043u: Correct GICD and GICR sizes
[ Upstream commit ab39547f739236e7f16b8b0a51fdca95cc9cadd3 ]
The RZ/G2UL SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Despite the RZ/G2UL SoC being single-core, it has two instances of GICR.
Fixes: cf40c9689e510 ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Tue Jul 30 13:24:36 2024 +0100
arm64: dts: renesas: r9a07g044: Correct GICD and GICR sizes
[ Upstream commit 833948fb2b63155847ab691a54800f801555429b ]
The RZ/G2L(C) SoC is equipped with the GIC-600. The GICD is 64KiB +
64KiB for the MBI alias (in total 128KiB), and the GICR is 128KiB per
CPU.
Fixes: 68a45525297b2 ("arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Tue Jul 30 13:24:35 2024 +0100
arm64: dts: renesas: r9a07g054: Correct GICD and GICR sizes
[ Upstream commit 45afa9eacb59b258d2e53c7f63430ea1e8344803 ]
The RZ/V2L SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Fixes: 7c2b8198f4f32 ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Date: Tue Jul 30 13:24:33 2024 +0100
arm64: dts: renesas: r9a08g045: Correct GICD and GICR sizes
[ Upstream commit ec9532628eb9d82282b8e52fd9c4a3800d87feec ]
The RZ/G3S SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Despite the RZ/G3S SoC being single-core, it has two instances of GICR.
Fixes: e20396d65b959 ("arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dragan Simic <dsimic@manjaro.org>
Date: Mon Jul 15 19:44:20 2024 +0200
arm64: dts: rockchip: Correct the Pinebook Pro battery design capacity
commit def33fb1191207f5afa6dcb681d71fef2a6c1293 upstream.
All batches of the Pine64 Pinebook Pro, except the latest batch (as of 2024)
whose hardware design was revised due to the component shortage, use a 1S
lithium battery whose nominal/design capacity is 10,000 mAh, according to the
battery datasheet. [1][2] Let's correct the design full-charge value in the
Pinebook Pro board dts, to improve the accuracy of the hardware description,
and to hopefully improve the accuracy of the fuel gauge a bit on all units
that don't belong to the latest batch.
The above-mentioned latest batch uses a different 1S lithium battery with
a slightly lower capacity, more precisely 9,600 mAh. To make the fuel gauge
work reliably on the latest batch, a sample battery would need to be sent to
CellWise, to obtain its proprietary battery profile, whose data goes into
"cellwise,battery-profile" in the Pinebook Pro board dts. Without that data,
the fuel gauge reportedly works unreliably, so changing the design capacity
won't have any negative effects on the already unreliable operation of the
fuel gauge in the Pinebook Pros that belong to the latest batch.
According to the battery datasheet, its voltage can go as low as 2.75 V while
discharging, but it's better to leave the current 3.0 V value in the dts file,
because of the associated Pinebook Pro's voltage regulation issues.
[1] https://wiki.pine64.org/index.php/Pinebook_Pro#Battery
[2] https://files.pine64.org/doc/datasheet/pinebook/40110175P%203.8V%2010000mAh%E8%A7%84%E6%A0%BC%E4%B9%A6-14.pdf
Fixes: c7c4d698cd28 ("arm64: dts: rockchip: add fuel gauge to Pinebook Pro dts")
Cc: stable@vger.kernel.org
Cc: Marek Kraus <gamiee@pine64.org>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/731f8ef9b1a867bcc730d19ed277c8c0534c0842.1721065172.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jonas Karlman <jonas@kwiboo.se>
Date: Tue Aug 27 21:18:16 2024 +0000
arm64: dts: rockchip: Correct vendor prefix for Hardkernel ODROID-M1
[ Upstream commit 735065e774dcfc62e38df01a535862138b6c92ed ]
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: fd3583267703 ("arm64: dts: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240827211825.1419820-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dragan Simic <dsimic@manjaro.org>
Date: Sun Aug 4 23:10:24 2024 +0200
arm64: dts: rockchip: Raise Pinebook Pro's panel backlight PWM frequency
commit 8c51521de18755d4112a77a598a348b38d0af370 upstream.
Increase the frequency of the PWM signal that drives the LED backlight of
the Pinebook Pro's panel, from about 1.35 KHz (which equals to the PWM
period of 740,740 ns), to exactly 8 kHz (which equals to the PWM period of
125,000 ns). Using a higher PWM frequency for the panel backlight, which
reduces the flicker, can only be beneficial to the end users' eyes.
On top of that, increasing the backlight PWM signal frequency reportedly
eliminates the buzzing emitted from the Pinebook Pro's built-in speakers
when certain backlight levels are set, which cause some weird interference
with some of the components of the Pinebook Pro's audio chain.
The old value for the backlight PWM period, i.e. 740,740 ns, is pretty much
an arbitrary value that was selected during the very early bring-up of the
Pinebook Pro, only because that value seemed to minimize horizontal line
distortion on the display, which resulted from the old X.org drivers causing
screen tearing when dragging windows around. That's no longer an issue, so
there are no reasons to stick with the old PWM period value.
The lower and the upper backlight PWM frequency limits for the Pinebook Pro's
panel, according to its datasheet, are 200 Hz and 10 kHz, respectively. [1]
These changes still leave some headroom, which may have some positive effects
on the lifetime expectancy of the panel's backlight LEDs.
[1] https://files.pine64.org/doc/datasheet/PinebookPro/NV140FHM-N49_Rev.P0_20160804_201710235838.pdf
Fixes: 5a65505a6988 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Cc: stable@vger.kernel.org
Reported-by: Nikola Radojevic <nikola@radojevic.rs>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Nikola Radojević <nikola@radojevic.rs>
Link: https://lore.kernel.org/r/2a23b6cfd8c0513e5b233b4006ee3d3ed09b824f.1722805655.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: MD Danish Anwar <danishanwar@ti.com>
Date: Fri Aug 30 16:40:00 2024 +0530
arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas
[ Upstream commit 2bea7920da8001172f54359395700616269ccb70 ]
ICSSG doesn't use mgmnt rsp dmas. But these are added in the dmas for
icssg1-eth and icssg0-eth node.
These mgmnt rsp dmas result in below dtbs_check warnings.
/workdir/arch/arm64/boot/dts/ti/k3-am654-idk.dtb: icssg1-eth: dmas: [[39, 49664], [39, 49665], [39, 49666], [39, 49667], [39, 49668], [39, 49669], [39, 49670], [39, 49671], [39, 16896], [39, 16897], [39, 16898], [39, 16899]] is too long
from schema $id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
/workdir/arch/arm64/boot/dts/ti/k3-am654-idk.dtb: icssg0-eth: dmas: [[39, 49408], [39, 49409], [39, 49410], [39, 49411], [39, 49412], [39, 49413], [39, 49414], [39, 49415], [39, 16640], [39, 16641], [39, 16642], [39, 16643]] is too long
from schema $id: http://devicetree.org/schemas/net/ti,icssg-prueth.yaml#
Fix these warnings by removing mgmnt rsp dmas from icssg1-eth and
icssg0-eth nodes.
Fixes: a4d5bc3214eb ("arm64: dts: ti: k3-am654-idk: Add ICSSG Ethernet ports")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240830111000.232028-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Davis <afd@ti.com>
Date: Thu Aug 1 13:12:32 2024 -0500
arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations
[ Upstream commit 1a314099b7559690fe23cdf3300dfff6e830ecb1 ]
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: fae14a1cb8dd ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Davis <afd@ti.com>
Date: Thu Aug 1 13:12:31 2024 -0500
arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations
[ Upstream commit 9f3814a7c06b7c7296cf8c1622078ad71820454b ]
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: f46d16cf5b43 ("arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: D Scott Phillips <scott@os.amperecomputing.com>
Date: Tue Aug 27 14:17:01 2024 -0700
arm64: errata: Enable the AC03_CPU_38 workaround for ampere1a
commit db0d8a84348b876df7c4276f0cbce5df3b769f5f upstream.
The ampere1a cpu is affected by erratum AC04_CPU_10 which is the same
bug as AC03_CPU_38. Add ampere1a to the AC03_CPU_38 workaround midr list.
Cc: <stable@vger.kernel.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827211701.2216719-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Anastasia Belova <abelova@astralinux.ru>
Date: Tue Sep 10 11:50:16 2024 +0300
arm64: esr: Define ESR_ELx_EC_* constants as UL
commit b6db3eb6c373b97d9e433530d748590421bbeea7 upstream.
Add explicit casting to prevent expantion of 32th bit of
u32 into highest half of u64 in several places.
For example, in inject_abt64:
ESR_ELx_EC_DABT_LOW << ESR_ELx_EC_SHIFT = 0x24 << 26.
This operation's result is int with 1 in 32th bit.
While casting this value into u64 (esr is u64) 1
fills 32 highest bits.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: <stable@vger.kernel.org>
Fixes: aa8eff9bfbd5 ("arm64: KVM: fault injection into a guest")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/stable/20240910085016.32120-1-abelova%40astralinux.ru
Link: https://lore.kernel.org/r/20240910085016.32120-1-abelova@astralinux.ru
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dave Martin <Dave.Martin@arm.com>
Date: Mon Jul 29 16:20:05 2024 +0100
arm64: signal: Fix some under-bracketed UAPI macros
[ Upstream commit fc2220c9b15828319b09384e68399b4afc6276d9 ]
A few SME-related sigcontext UAPI macros leave an argument
unprotected from misparsing during macro expansion.
Add parentheses around references to macro arguments where
appropriate.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Fixes: ee072cf70804 ("arm64/sme: Implement signal handling for ZT")
Fixes: 39782210eb7e ("arm64/sme: Implement ZA signal handling")
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240729152005.289844-1-Dave.Martin@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Wed Aug 21 14:53:57 2024 -0700
arm64: smp: smp_send_stop() and crash_smp_send_stop() should try non-NMI first
[ Upstream commit fdfa588124b6356cd08e5d3f0c3643c4ec3d6887 ]
When testing hard lockup handling on my sc7180-trogdor-lazor device
with pseudo-NMI enabled, with serial console enabled and with kgdb
disabled, I found that the stack crawls printed to the serial console
ended up as a jumbled mess. After rebooting, the pstore-based console
looked fine though. Also, enabling kgdb to trap the panic made the
console look fine and avoided the mess.
After a bit of tracking down, I came to the conclusion that this was
what was happening:
1. The panic path was stopping all other CPUs with
panic_other_cpus_shutdown().
2. At least one of those other CPUs was in the middle of printing to
the serial console and holding the console port's lock, which is
grabbed with "irqsave". ...but since we were stopping with an NMI
we didn't care about the "irqsave" and interrupted anyway.
3. Since we stopped the CPU while it was holding the lock it would
never release it.
4. All future calls to output to the console would end up failing to
get the lock in qcom_geni_serial_console_write(). This isn't
_totally_ unexpected at panic time but it's a code path that's not
well tested, hard to get right, and apparently doesn't work
terribly well on the Qualcomm geni serial driver.
The Qualcomm geni serial driver was fixed to be a bit better in commit
9e957a155005 ("serial: qcom-geni: Don't cancel/abort if we can't get
the port lock") but it's nice not to get into this situation in the
first place.
Taking a page from what x86 appears to do in native_stop_other_cpus(),
do this:
1. First, try to stop other CPUs with a normal IPI and wait a second.
This gives them a chance to leave critical sections.
2. If CPUs fail to stop then retry with an NMI, but give a much lower
timeout since there's no good reason for a CPU not to react quickly
to a NMI.
This works well and avoids the corrupted console and (presumably)
could help avoid other similar issues.
In order to do this, we need to do a little re-organization of our
IPIs since we don't have any more free IDs. Do what was suggested in
previous conversations and combine "stop" and "crash stop". That frees
up an IPI so now we can have a "stop" and "stop NMI".
In order to do this we also need a slight change in the way we keep
track of which CPUs still need to be stopped. We need to know
specifically which CPUs haven't stopped yet when we fall back to NMI
but in the "crash stop" case the "cpu_online_mask" isn't updated as
CPUs go down. This is why that code path had an atomic of the number
of CPUs left. Solve this by also updating the "cpu_online_mask" for
crash stops.
All of the above lets us combine the logic for "stop" and "crash stop"
code, which appeared to have a bunch of arbitrary implementation
differences.
Aside from the above change where we try a normal IPI and then an NMI,
the combined function has a few subtle differences:
* In the normal smp_send_stop(), if we fail to stop one or more CPUs
then we won't include the current CPU (the one running
smp_send_stop()) in the error message.
* In crash_smp_send_stop(), if we fail to stop some CPUs we'll print
the CPUs that we failed to stop instead of printing all _but_ the
current running CPU.
* In crash_smp_send_stop(), we will now only print "SMP: stopping
secondary CPUs" if (system_state <= SYSTEM_RUNNING).
Fixes: d7402513c935 ("arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240821145353.v3.1.Id4817adef610302554b8aa42b090d57270dc119c@changeid
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jon Hunter <jonathanh@nvidia.com>
Date: Fri Jul 12 14:20:20 2024 +0100
arm64: tegra: Correct location of power-sensors for IGX Orin
[ Upstream commit b93679b8f165467e1584f9b23055db83f45c32ce ]
The power-sensors are located on the carrier board and not the
module board and so update the IGX Orin device-tree files to fix this.
Fixes: 9152ed09309d ("arm64: tegra: Add power-sensors for Tegra234 boards")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Calvin Owens <calvin@wbinvd.org>
Date: Mon Jul 29 17:05:51 2024 +0100
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
[ Upstream commit 89a906dfa8c3b21b3e5360f73c49234ac1eb885b ]
Floating point instructions in userspace can crash some arm kernels
built with clang/LLD 17.0.6:
BUG: unsupported FP instruction in kernel mode
FPEXC == 0xc0000780
Internal error: Oops - undefined instruction: 0 [#1] ARM
CPU: 0 PID: 196 Comm: vfp-reproducer Not tainted 6.10.0 #1
Hardware name: BCM2835
PC is at vfp_support_entry+0xc8/0x2cc
LR is at do_undefinstr+0xa8/0x250
pc : [<c0101d50>] lr : [<c010a80c>] psr: a0000013
sp : dc8d1f68 ip : 60000013 fp : bedea19c
r10: ec532b17 r9 : 00000010 r8 : 0044766c
r7 : c0000780 r6 : ec532b17 r5 : c1c13800 r4 : dc8d1fb0
r3 : c10072c4 r2 : c0101c88 r1 : ec532b17 r0 : 0044766c
Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 0251c008 DAC: 00000051
Register r0 information: non-paged memory
Register r1 information: vmalloc memory
Register r2 information: non-slab/vmalloc memory
Register r3 information: non-slab/vmalloc memory
Register r4 information: 2-page vmalloc region
Register r5 information: slab kmalloc-cg-2k
Register r6 information: vmalloc memory
Register r7 information: non-slab/vmalloc memory
Register r8 information: non-paged memory
Register r9 information: zero-size pointer
Register r10 information: vmalloc memory
Register r11 information: non-paged memory
Register r12 information: non-paged memory
Process vfp-reproducer (pid: 196, stack limit = 0x61aaaf8b)
Stack: (0xdc8d1f68 to 0xdc8d2000)
1f60: 0000081f b6f69300 0000000f c10073f4 c10072c4 dc8d1fb0
1f80: ec532b17 0c532b17 0044766c b6f9ccd8 00000000 c010a80c 00447670 60000010
1fa0: ffffffff c1c13800 00c5387d c0100f10 b6f68af8 00448fc0 00000000 bedea188
1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c
1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff 00000000 00000000
Call trace:
[<c0101d50>] (vfp_support_entry) from [<c010a80c>] (do_undefinstr+0xa8/0x250)
[<c010a80c>] (do_undefinstr) from [<c0100f10>] (__und_usr+0x70/0x80)
Exception stack(0xdc8d1fb0 to 0xdc8d1ff8)
1fa0: b6f68af8 00448fc0 00000000 bedea188
1fc0: bedea314 00000001 00448ebc b6f9d000 00447608 b6f9ccd8 00000000 bedea19c
1fe0: bede9198 bedea188 b6e1061c 0044766c 60000010 ffffffff
Code: 0a000061 e3877202 e594003c e3a09010 (eef16a10)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Fatal exception in interrupt
---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
This is a minimal userspace reproducer on a Raspberry Pi Zero W:
#include <stdio.h>
#include <math.h>
int main(void)
{
double v = 1.0;
printf("%fn", NAN + *(volatile double *)&v);
return 0;
}
Another way to consistently trigger the oops is:
calvin@raspberry-pi-zero-w ~$ python -c "import json"
The bug reproduces only when the kernel is built with DYNAMIC_DEBUG=n,
because the pr_debug() calls act as barriers even when not activated.
This is the output from the same kernel source built with the same
compiler and DYNAMIC_DEBUG=y, where the userspace reproducer works as
expected:
VFP: bounce: trigger ec532b17 fpexc c0000780
VFP: emulate: INST=0xee377b06 SCR=0x00000000
VFP: bounce: trigger eef1fa10 fpexc c0000780
VFP: emulate: INST=0xeeb40b40 SCR=0x00000000
VFP: raising exceptions 30000000
calvin@raspberry-pi-zero-w ~$ ./vfp-reproducer
nan
Crudely grepping for vmsr/vmrs instructions in the otherwise nearly
idential text for vfp_support_entry() makes the problem obvious:
vmlinux.llvm.good [0xc0101cb8] <+48>: vmrs r7, fpexc
vmlinux.llvm.good [0xc0101cd8] <+80>: vmsr fpexc, r0
vmlinux.llvm.good [0xc0101d20] <+152>: vmsr fpexc, r7
vmlinux.llvm.good [0xc0101d38] <+176>: vmrs r4, fpexc
vmlinux.llvm.good [0xc0101d6c] <+228>: vmrs r0, fpscr
vmlinux.llvm.good [0xc0101dc4] <+316>: vmsr fpexc, r0
vmlinux.llvm.good [0xc0101dc8] <+320>: vmrs r0, fpsid
vmlinux.llvm.good [0xc0101dcc] <+324>: vmrs r6, fpscr
vmlinux.llvm.good [0xc0101e10] <+392>: vmrs r10, fpinst
vmlinux.llvm.good [0xc0101eb8] <+560>: vmrs r10, fpinst2
vmlinux.llvm.bad [0xc0101cb8] <+48>: vmrs r7, fpexc
vmlinux.llvm.bad [0xc0101cd8] <+80>: vmsr fpexc, r0
vmlinux.llvm.bad [0xc0101d20] <+152>: vmsr fpexc, r7
vmlinux.llvm.bad [0xc0101d30] <+168>: vmrs r0, fpscr
vmlinux.llvm.bad [0xc0101d50] <+200>: vmrs r6, fpscr <== BOOM!
vmlinux.llvm.bad [0xc0101d6c] <+228>: vmsr fpexc, r0
vmlinux.llvm.bad [0xc0101d70] <+232>: vmrs r0, fpsid
vmlinux.llvm.bad [0xc0101da4] <+284>: vmrs r10, fpinst
vmlinux.llvm.bad [0xc0101df8] <+368>: vmrs r4, fpexc
vmlinux.llvm.bad [0xc0101e5c] <+468>: vmrs r10, fpinst2
I think LLVM's reordering is valid as the code is currently written: the
compiler doesn't know the instructions have side effects in hardware.
Fix by using "asm volatile" in fmxr() and fmrx(), so they cannot be
reordered with respect to each other. The original compiler now produces
working kernels on my hardware with DYNAMIC_DEBUG=n.
This is the relevant piece of the diff of the vfp_support_entry() text,
from the original oopsing kernel to a working kernel with this patch:
vmrs r0, fpscr
tst r0, #4096
bne 0xc0101d48
tst r0, #458752
beq 0xc0101ecc
orr r7, r7, #536870912
ldr r0, [r4, #0x3c]
mov r9, #16
-vmrs r6, fpscr
orr r9, r9, #251658240
add r0, r0, #4
str r0, [r4, #0x3c]
mvn r0, #159
sub r0, r0, #-1207959552
and r0, r7, r0
vmsr fpexc, r0
vmrs r0, fpsid
+vmrs r6, fpscr
and r0, r0, #983040
cmp r0, #65536
bne 0xc0101d88
Fixes: 4708fb041346 ("ARM: vfp: Reimplement VFP exception entry in C code")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sat Aug 31 12:11:28 2024 +0200
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
commit 1b0e32753d8550908dff8982410357b5114be78c upstream.
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pins' is a required property
imx6ul-geam.dtb: pinctrl@20e0000: tscgrp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: a58e4e608bc8 ("ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sat Aug 31 12:11:29 2024 +0200
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
commit 3dedd4889cfc2851444a1f7626b293c0bfd1e42c upstream.
The property is "fsl,pins", not "fsl,pin". Wrong property means the pin
configuration was not applied. Fixes dtbs_check warnings:
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pins' is a required property
imx6ull-seeed-npi-dev-board-emmc.dtb: pinctrl@20e0000: uart1grp: 'fsl,pin' does not match any of the regexes: 'pinctrl-[0-9]+'
Cc: stable@vger.kernel.org
Fixes: e3b5697195c8 ("ARM: dts: imx6ull: add seeed studio NPi dev board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Wed Aug 28 11:56:36 2024 +0200
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
[ Upstream commit 0e49cfe364dea4345551516eb2fe53135a10432b ]
There is no "fsl,phy" property in pin controller pincfg nodes:
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,pins' is a required property
imx7d-zii-rmu2.dtb: pinctrl@302c0000: enet1phyinterruptgrp: 'fsl,phy' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: f496e6750083 ("ARM: dts: Add ZII support for ZII i.MX7 RMU2 board")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Dahl <ada@thorsis.com>
Date: Wed Aug 21 07:51:36 2024 +0200
ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks
[ Upstream commit d355c895fa4ddd8bec15569eee540baeed7df8c5 ]
The RTC and RTT peripherals use the timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator or slow rc oscillator.
The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/r/20240821055136.6858-1-ada@thorsis.com
[claudiu.beznea: removed () around the last commit description paragraph,
removed " in front of "timing domain slow clock", described that
TD_SLCK can also be sourced from slow rc oscillator]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Date: Mon Aug 26 19:53:20 2024 +0300
ARM: dts: microchip: sama7g5: Fix RTT clock
[ Upstream commit 867bf1923200e6ad82bad0289f43bf20b4ac7ff9 ]
According to datasheet, Chapter 34. Clock Generator, section 34.2,
Embedded characteristics, source clock for RTT is the TD_SLCK, registered
with ID 1 by the slow clock controller driver. Fix RTT clock.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Link: https://lore.kernel.org/r/20240826165320.3068359-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Mon Aug 26 07:49:33 2024 +0200
ARM: versatile: fix OF node leak in CPUs prepare
[ Upstream commit f2642d97f2105ed17b2ece0c597450f2ff95d704 ]
Machine code is leaking OF node reference from of_find_matching_node()
in realview_smp_prepare_cpus().
Fixes: 5420b4b15617 ("ARM: realview: add an DT SMP boot method")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/20240826054934.10724-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: tangbin <tangbin@cmss.chinamobile.com>
Date: Tue Sep 3 17:06:20 2024 +0800
ASoC: loongson: fix error release
[ Upstream commit 97688a9c5b1fd2b826c682cdfa36d411a5c99828 ]
In function loongson_card_parse_of(), when get device_node
'codec' failed, the function of_node_put(codec) should not
be invoked, thus fix error release.
Fixes: d24028606e76 ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240903090620.6276-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Fri Aug 30 22:31:54 2024 +0800
ASoC: rt5682: Return devm_of_clk_add_hw_provider to transfer the error
commit fcca6d05ef49d5650514ea1dcfd12e4ae3ff2be6 upstream.
Return devm_of_clk_add_hw_provider() in order to transfer the error, if it
fails due to resource allocation failure or device tree clock provider
registration failure.
Cc: stable@vger.kernel.org
Fixes: ebbfabc16d23 ("ASoC: rt5682: Add CCF usage for providing I2S clks")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240830143154.3448004-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Wed Jul 17 19:54:36 2024 +0800
ASoC: rt5682s: Return devm_of_clk_add_hw_provider to transfer the error
[ Upstream commit 3ff810b9bebe5578a245cfa97c252ab602e703f1 ]
Return devm_of_clk_add_hw_provider() in order to transfer the error, if it
fails due to resource allocation failure or device tree clock provider
registration failure.
Fixes: bdd229ab26be ("ASoC: rt5682s: Add driver for ALC5682I-VS codec")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240717115436.3449492-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Wed Aug 7 17:02:32 2024 +0200
ASoC: tas2781-i2c: Drop weird GPIO code
[ Upstream commit c2c0b67dca3cb3b3cea0dd60075a1c5ba77e2fcd ]
The tas2781-i2c driver gets an IRQ from either ACPI or device tree,
then proceeds to check if the IRQ has a corresponding GPIO and in
case it does enforce the GPIO as input and set a label on it.
This is abuse of the API:
- First we cannot guarantee that the numberspaces of the GPIOs and
the IRQs are the same, i.e that an IRQ number corresponds to
a GPIO number like that.
- Second, GPIO chips and IRQ chips should be treated as orthogonal
APIs, the irqchip needs to ascertain that the backing GPIO line
is set to input etc just using the irqchip.
- Third it is using the legacy <linux/gpio.h> API which should not
be used in new code yet this was added just a year ago.
Delete the offending code.
If this creates problems the GPIO and irqchip maintainers can help
to fix the issues.
It *should* not create any problems, because the irq isn't
used anywhere in the driver, it's just obtained and then
left unused.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-1-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Wed Aug 7 17:02:33 2024 +0200
ASoC: tas2781-i2c: Get the right GPIO line
[ Upstream commit 1c4b509edad15192bfb64c81d3c305bbae8070db ]
The code is obtaining a GPIO reset using the reset GPIO
name "reset-gpios", but the gpiolib is already adding the
suffix "-gpios" to anything passed to this function and
will be looking for "reset-gpios-gpios" which is most
certainly not what the author desired.
Fix it up.
Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240807-asoc-tas-gpios-v2-2-bd0f2705d58b@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rob Herring (Arm) <robh@kernel.org>
Date: Tue Jul 2 15:54:01 2024 -0600
ASoC: tas2781: Use of_property_read_reg()
[ Upstream commit 31a45f9190b5b4f5cd8cdec8471babd5215eee04 ]
Replace the open-coded parsing of "reg" with of_property_read_reg().
The #ifdef is also easily replaced with IS_ENABLED().
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240702215402.839673-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: c2c0b67dca3c ("ASoC: tas2781-i2c: Drop weird GPIO code")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Damien Le Moal <dlemoal@kernel.org>
Date: Mon Sep 23 18:14:36 2024 +0900
ata: libata-scsi: Fix ata_msense_control() CDL page reporting
commit 0e9a2990a93f27daa643b6fa73cfa47b128947a7 upstream.
When the user requests the ALL_SUB_MPAGES mode sense page,
ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding
the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct
the second call to ata_msense_control_spgt2() to report the
CDL_T2B_SUB_MPAGE page.
Fixes: 673b2fe6ff1d ("scsi: ata: libata-scsi: Add support for CDL pages mode sense")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Niklas Cassel <cassel@kernel.org>
Date: Mon Sep 9 17:42:38 2024 +0200
ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data
[ Upstream commit e5dd410acb34c7341a0a93b429dcf3dabf9e3323 ]
When ata_qc_complete() schedules a command for EH using
ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to
req->q->mq_ops->timeout() / scsi_timeout() being called.
scsi_timeout(), if the LLDD has no abort handler (libata has no abort
handler), will set host byte to DID_TIME_OUT, and then call
scsi_eh_scmd_add() to add the command to EH.
Thus, when commands first enter libata's EH strategy_handler, all the
commands that have been added to EH will have DID_TIME_OUT set.
libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that
have not received a completion at the time of entering EH.
Thus, libata doesn't really care about DID_TIME_OUT at all, and currently
clears the host byte at the end of EH, in ata_scsi_qc_complete(), before
scsi_eh_finish_cmd() is called.
However, this clearing in ata_scsi_qc_complete() is currently only done
for commands that are not ATA passthrough commands.
Since the host byte is visible in the completion that we return to user
space for ATA passthrough commands, for ATA passthrough commands that got
completed via EH (commands with sense data), the user will incorrectly see:
ATA pass-through(16): transport error: Host_status=0x03 [DID_TIME_OUT]
Fix this by moving the clearing of the host byte (which is currently only
done for commands that are not ATA passthrough commands) from
ata_scsi_qc_complete() to the start of EH (regardless if the command is
ATA passthrough or not).
While at it, use the proper helper function to clear the host byte, rather
than open coding the clearing.
This will make sure that we:
-Correctly clear DID_TIME_OUT for both ATA passthrough commands and
commands that are not ATA passthrough commands.
-Do not needlessly clear the host byte for commands that did not go via EH.
ata_scsi_qc_complete() is called both for commands that are completed
normally (without going via EH), and for commands that went via EH,
however, only commands that went via EH will have DID_TIME_OUT set.
Fixes: 24aeebbf8ea9 ("scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITION")
Reported-by: Igor Pylypiv <ipylypiv@google.com>
Closes: https://lore.kernel.org/linux-ide/ZttIN8He8TOZ7Lct@google.com/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aleksa Sarai <cyphar@cyphar.com>
Date: Wed Jul 31 23:10:27 2024 +1000
autofs: fix missing fput for FSCONFIG_SET_FD
[ Upstream commit 6a64c5220c5df235448b846aeff3c0660d4cc83e ]
If you pass an fd using FSCONFIG_SET_FD, autofs_parse_fd() "steals" the
param->file and so the fs_context infrastructure will not do fput() for
us.
Fixes: e6ec453bd0f0 ("autofs: convert autofs to use the new mount api")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20240731-fsconfig-fsparam_fd-fixes-v2-1-e7c472224417@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guillaume Nault <gnault@redhat.com>
Date: Wed Sep 11 11:20:58 2024 +0200
bareudp: Pull inner IP header in bareudp_udp_encap_recv().
[ Upstream commit 45fa29c85117170b0508790f878b13ec6593c888 ]
Bareudp reads the inner IP header to get the ECN value. Therefore, it
needs to ensure that it's part of the skb's linear data.
This is similar to the vxlan and geneve fixes for that same problem:
* commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().")
* commit 1ca1ba465e55 ("geneve: make sure to pull inner header in
geneve_rx()")
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guillaume Nault <gnault@redhat.com>
Date: Wed Sep 11 11:21:05 2024 +0200
bareudp: Pull inner IP header on xmit.
[ Upstream commit c471236b2359e6b27388475dd04fff0a5e2bf922 ]
Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner
IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore
we need to ensure that the inner IP header is part of the skb's linear
data.
Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Mon Sep 2 21:03:27 2024 +0800
block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()
[ Upstream commit 0e456dba86c7f9a19792204a044835f1ca2c8dbb ]
Consider the following merge chain:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Mon Sep 2 21:03:28 2024 +0800
block, bfq: don't break merge chain in bfq_split_bfqq()
[ Upstream commit 42c306ed723321af4003b2a41bb73728cab54f85 ]
Consider the following scenario:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Mon Sep 2 21:03:26 2024 +0800
block, bfq: fix possible UAF for bfqq->bic with merge chain
[ Upstream commit 18ad4df091dd5d067d2faa8fce1180b79f7041a7 ]
1) initial state, three tasks:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| Λ | Λ | Λ
| | | | | |
V | V | V |
bfqq1 bfqq2 bfqq3
process ref: 1 1 1
2) bfqq1 merged to bfqq2:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
| | | Λ
\--------------\| | |
V V |
bfqq1--------->bfqq2 bfqq3
process ref: 0 2 1
3) bfqq2 merged to bfqq3:
Process 1 Process 2 Process 3
(BIC1) (BIC2) (BIC3)
here -> Λ | |
\--------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3
process ref: 0 1 3
In this case, IO from Process 1 will get bfqq2 from BIC1 first, and then
get bfqq3 through merge chain, and finially handle IO by bfqq3.
Howerver, current code will think bfqq2 is owned by BIC1, like initial
state, and set bfqq2->bic to BIC1.
bfq_insert_request
-> by Process 1
bfqq = bfq_init_rq(rq)
bfqq = bfq_get_bfqq_handle_split
bfqq = bic_to_bfqq
-> get bfqq2 from BIC1
bfqq->ref++
rq->elv.priv[0] = bic
rq->elv.priv[1] = bfqq
if (bfqq_process_refs(bfqq) == 1)
bfqq->bic = bic
-> record BIC1 to bfqq2
__bfq_insert_request
new_bfqq = bfq_setup_cooperator
-> get bfqq3 from bfqq2->new_bfqq
bfqq_request_freed(bfqq)
new_bfqq->ref++
rq->elv.priv[1] = new_bfqq
-> handle IO by bfqq3
Fix the problem by checking bfqq is from merge chain fist. And this
might fix a following problem reported by our syzkaller(unreproducible):
==================================================================
BUG: KASAN: slab-use-after-free in bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
BUG: KASAN: slab-use-after-free in bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
BUG: KASAN: slab-use-after-free in bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
Write of size 1 at addr ffff888123839eb8 by task kworker/0:1H/18595
CPU: 0 PID: 18595 Comm: kworker/0:1H Tainted: G L 6.6.0-07439-gba2303cacfda #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Workqueue: kblockd blk_mq_requeue_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0x10d/0x610 mm/kasan/report.c:475
kasan_report+0x8e/0xc0 mm/kasan/report.c:588
bfq_do_early_stable_merge block/bfq-iosched.c:5692 [inline]
bfq_do_or_sched_stable_merge block/bfq-iosched.c:5805 [inline]
bfq_get_queue+0x25b0/0x2610 block/bfq-iosched.c:5889
bfq_get_bfqq_handle_split+0x169/0x5d0 block/bfq-iosched.c:6757
bfq_init_rq block/bfq-iosched.c:6876 [inline]
bfq_insert_request block/bfq-iosched.c:6254 [inline]
bfq_insert_requests+0x1112/0x5cf0 block/bfq-iosched.c:6304
blk_mq_insert_request+0x290/0x8d0 block/blk-mq.c:2593
blk_mq_requeue_work+0x6bc/0xa70 block/blk-mq.c:1502
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
</TASK>
Allocated by task 20776:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
__kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328
kasan_slab_alloc include/linux/kasan.h:188 [inline]
slab_post_alloc_hook mm/slab.h:763 [inline]
slab_alloc_node mm/slub.c:3458 [inline]
kmem_cache_alloc_node+0x1a4/0x6f0 mm/slub.c:3503
ioc_create_icq block/blk-ioc.c:370 [inline]
ioc_find_get_icq+0x180/0xaa0 block/blk-ioc.c:436
bfq_prepare_request+0x39/0xf0 block/bfq-iosched.c:6812
blk_mq_rq_ctx_init.isra.7+0x6ac/0xa00 block/blk-mq.c:403
__blk_mq_alloc_requests+0xcc0/0x1070 block/blk-mq.c:517
blk_mq_get_new_requests block/blk-mq.c:2940 [inline]
blk_mq_submit_bio+0x624/0x27c0 block/blk-mq.c:3042
__submit_bio+0x331/0x6f0 block/blk-core.c:624
__submit_bio_noacct_mq block/blk-core.c:703 [inline]
submit_bio_noacct_nocheck+0x816/0xb40 block/blk-core.c:732
submit_bio_noacct+0x7a6/0x1b50 block/blk-core.c:826
xlog_write_iclog+0x7d5/0xa00 fs/xfs/xfs_log.c:1958
xlog_state_release_iclog+0x3b8/0x720 fs/xfs/xfs_log.c:619
xlog_cil_push_work+0x19c5/0x2270 fs/xfs/xfs_log_cil.c:1330
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
Freed by task 946:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
kasan_set_track+0x25/0x30 mm/kasan/common.c:52
kasan_save_free_info+0x2b/0x50 mm/kasan/generic.c:522
____kasan_slab_free mm/kasan/common.c:236 [inline]
__kasan_slab_free+0x12c/0x1c0 mm/kasan/common.c:244
kasan_slab_free include/linux/kasan.h:164 [inline]
slab_free_hook mm/slub.c:1815 [inline]
slab_free_freelist_hook mm/slub.c:1841 [inline]
slab_free mm/slub.c:3786 [inline]
kmem_cache_free+0x118/0x6f0 mm/slub.c:3808
rcu_do_batch+0x35c/0xe30 kernel/rcu/tree.c:2189
rcu_core+0x819/0xd90 kernel/rcu/tree.c:2462
__do_softirq+0x1b0/0x7a2 kernel/softirq.c:553
Last potentially related work creation:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492
__call_rcu_common kernel/rcu/tree.c:2712 [inline]
call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826
ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105
ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
Second to last potentially related work creation:
kasan_save_stack+0x20/0x40 mm/kasan/common.c:45
__kasan_record_aux_stack+0xaf/0xc0 mm/kasan/generic.c:492
__call_rcu_common kernel/rcu/tree.c:2712 [inline]
call_rcu+0xce/0x1020 kernel/rcu/tree.c:2826
ioc_destroy_icq+0x54c/0x830 block/blk-ioc.c:105
ioc_release_fn+0xf0/0x360 block/blk-ioc.c:124
process_one_work kernel/workqueue.c:2627 [inline]
process_scheduled_works+0x432/0x13f0 kernel/workqueue.c:2700
worker_thread+0x6f2/0x1160 kernel/workqueue.c:2781
kthread+0x33c/0x440 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:305
The buggy address belongs to the object at ffff888123839d68
which belongs to the cache bfq_io_cq of size 1360
The buggy address is located 336 bytes inside of
freed 1360-byte region [ffff888123839d68, ffff88812383a2b8)
The buggy address belongs to the physical page:
page:ffffea00048e0e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812383f588 pfn:0x123838
head:ffffea00048e0e00 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x17ffffc0000a40(workingset|slab|head|node=0|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0017ffffc0000a40 ffff88810588c200 ffffea00048ffa10 ffff888105889488
raw: ffff88812383f588 0000000000150006 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888123839d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888123839e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888123839e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888123839f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888123839f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fixes: 36eca8948323 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Mon Sep 9 21:41:49 2024 +0800
block, bfq: fix procress reference leakage for bfqq in merge chain
[ Upstream commit 73aeab373557fa6ee4ae0b742c6211ccd9859280 ]
Original state:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
After commit 0e456dba86c7 ("block, bfq: choose the last bfqq from merge
chain in bfq_setup_cooperator()"), if P1 issues a new IO:
Without the patch:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\------------------------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
bfqq3 will be used to handle IO from P1, this is not expected, IO
should be redirected to bfqq4;
With the patch:
-------------------------------------------
| |
Process 1 Process 2 Process 3 | Process 4
(BIC1) (BIC2) (BIC3) | (BIC4)
| | | |
\-------------\ \-------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 2 4
IO is redirected to bfqq4, however, procress reference of bfqq3 is still
2, while there is only P2 using it.
Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge
chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify
code.
Fixes: 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Mon Sep 9 21:41:48 2024 +0800
block, bfq: fix uaf for accessing waker_bfqq after splitting
[ Upstream commit 1ba0403ac6447f2d63914fb760c44a3b19c44eaf ]
After commit 42c306ed7233 ("block, bfq: don't break merge chain in
bfq_split_bfqq()"), if the current procress is the last holder of bfqq,
the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and
then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq
may in the merge chain of bfqq, hence just recored waker_bfqq is still
not safe.
Fix the problem by adding a helper bfq_waker_bfqq() to check if
bfqq->waker_bfqq is in the merge chain, and current procress is the only
holder.
Fixes: 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Riyan Dhiman <riyandhiman14@gmail.com>
Date: Wed Sep 11 18:59:54 2024 +0530
block: fix potential invalid pointer dereference in blk_add_partition
[ Upstream commit 26e197b7f9240a4ac301dd0ad520c0c697c2ea7d ]
The blk_add_partition() function initially used a single if-condition
(IS_ERR(part)) to check for errors when adding a partition. This was
modified to handle the specific case of -ENXIO separately, allowing the
function to proceed without logging the error in this case. However,
this change unintentionally left a path where md_autodetect_dev()
could be called without confirming that part is a valid pointer.
This commit separates the error handling logic by splitting the
initial if-condition, improving code readability and handling specific
error scenarios explicitly. The function now distinguishes the general
error case from -ENXIO without altering the existing behavior of
md_autodetect_dev() calls.
Fixes: b72053072c0b (block: allow partitions on host aware zone devices)
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240911132954.5874-1-riyandhiman14@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Mon Sep 9 16:51:52 2024 -0400
Bluetooth: btusb: Fix not handling ZPL/short-transfer
[ Upstream commit 7b05933340f4490ef5b09e84d644d12484b05fdf ]
Requesting transfers of the exact same size of wMaxPacketSize may result
in ZPL/short-transfer since the USB stack cannot handle it as we are
limiting the buffer size to be the same as wMaxPacketSize.
Also, in terms of throughput this change has the same effect to
interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput
by increasing the frame size" had for the bulk endpoint, so users of the
advertisement bearer (e.g. BT Mesh) may benefit from this change.
Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Fri Aug 30 17:29:27 2024 -0400
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
[ Upstream commit d47da6bd4cfa982fe903f33423b9e2ec541e9496 ]
If HCI_CONN_MGMT_CONNECTED has been set then the event shall be
HCI_CONN_MGMT_DISCONNECTED.
Fixes: b644ba336997 ("Bluetooth: Update device_connected and device_found events to latest API")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Date: Wed Aug 16 12:05:00 2023 -0700
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
[ Upstream commit cfbfeee61582e638770a1a10deef866c9adb38f5 ]
This ignores errors from HCI_OP_REMOTE_NAME_REQ_CANCEL since it
shouldn't interfere with the stopping of discovery and in certain
conditions it seems to be failing.
Link: https://github.com/bluez/bluez/issues/575
Fixes: d0b137062b2d ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiwon Kim <jiwonaid0@gmail.com>
Date: Wed Sep 18 14:06:02 2024 +0000
bonding: Fix unnecessary warnings and logs from bond_xdp_get_xmit_slave()
[ Upstream commit 0cbfd45fbcf0cb26d85c981b91c62fe73cdee01c ]
syzbot reported a WARNING in bond_xdp_get_xmit_slave. To reproduce
this[1], one bond device (bond1) has xdpdrv, which increases
bpf_master_redirect_enabled_key. Another bond device (bond0) which is
unsupported by XDP but its slave (veth3) has xdpgeneric that returns
XDP_TX. This triggers WARN_ON_ONCE() from the xdp_master_redirect().
To reduce unnecessary warnings and improve log management, we need to
delete the WARN_ON_ONCE() and add ratelimit to the netdev_err().
[1] Steps to reproduce:
# Needs tx_xdp with return XDP_TX;
ip l add veth0 type veth peer veth1
ip l add veth3 type veth peer veth4
ip l add bond0 type bond mode 6 # BOND_MODE_ALB, unsupported by XDP
ip l add bond1 type bond # BOND_MODE_ROUNDROBIN by default
ip l set veth0 master bond1
ip l set bond1 up
# Increases bpf_master_redirect_enabled_key
ip l set dev bond1 xdpdrv object tx_xdp.o section xdp_tx
ip l set veth3 master bond0
ip l set bond0 up
ip l set veth4 up
# Triggers WARN_ON_ONCE() from the xdp_master_redirect()
ip l set veth3 xdpgeneric object tx_xdp.o section xdp_tx
Reported-by: syzbot+c187823a52ed505b2257@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c187823a52ed505b2257
Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver")
Signed-off-by: Jiwon Kim <jiwonaid0@gmail.com>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240918140602.18644-1-jiwonaid0@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leon Hwang <hffilwlqm@gmail.com>
Date: Sun Jul 14 20:39:01 2024 +0800
bpf, arm64: Fix tailcall hierarchy
[ Upstream commit 66ff4d61dc124eafe9efaeaef696a09b7f236da2 ]
This patch fixes a tailcall issue caused by abusing the tailcall in
bpf2bpf feature on arm64 like the way of "bpf, x64: Fix tailcall
hierarchy".
On arm64, when a tail call happens, it uses tail_call_cnt_ptr to
increment tail_call_cnt, too.
At the prologue of main prog, it has to initialize tail_call_cnt and
prepare tail_call_cnt_ptr.
At the prologue of subprog, it pushes x26 register twice, and does not
initialize tail_call_cnt.
At the epilogue, it pops x26 twice, no matter whether it is main prog or
subprog.
Fixes: d4609a5d8c70 ("bpf, arm64: Keep tail call count across bpf2bpf calls")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240714123902.32305-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Kuohai <xukuohai@huawei.com>
Date: Fri Jul 19 19:00:52 2024 +0800
bpf, lsm: Add check for BPF LSM return value
[ Upstream commit 5d99e198be279045e6ecefe220f5c52f8ce9bfd5 ]
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned.
Fixes: 520b7aa00d8c ("bpf: lsm: Initialize the BPF LSM hooks")
Reported-by: Xin Liu <liuxin350@huawei.com>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240719110059.797546-3-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leon Hwang <hffilwlqm@gmail.com>
Date: Sun Jul 14 20:39:00 2024 +0800
bpf, x64: Fix tailcall hierarchy
[ Upstream commit 116e04ba1459fc08f80cf27b8c9f9f188be0fcb2 ]
This patch fixes a tailcall issue caused by abusing the tailcall in
bpf2bpf feature.
As we know, tail_call_cnt propagates by rax from caller to callee when
to call subprog in tailcall context. But, like the following example,
MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt
back-propagation from callee to caller.
\#include <linux/bpf.h>
\#include <bpf/bpf_helpers.h>
\#include "bpf_legacy.h"
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 1);
__uint(key_size, sizeof(__u32));
__uint(value_size, sizeof(__u32));
} jmp_table SEC(".maps");
int count = 0;
static __noinline
int subprog_tail1(struct __sk_buff *skb)
{
bpf_tail_call_static(skb, &jmp_table, 0);
return 0;
}
static __noinline
int subprog_tail2(struct __sk_buff *skb)
{
bpf_tail_call_static(skb, &jmp_table, 0);
return 0;
}
SEC("tc")
int entry(struct __sk_buff *skb)
{
volatile int ret = 1;
count++;
subprog_tail1(skb);
subprog_tail2(skb);
return ret;
}
char __license[] SEC("license") = "GPL";
At run time, the tail_call_cnt in entry() will be propagated to
subprog_tail1() and subprog_tail2(). But, when the tail_call_cnt in
subprog_tail1() updates when bpf_tail_call_static(), the tail_call_cnt
in entry() won't be updated at the same time. As a result, in entry(),
when tail_call_cnt in entry() is less than MAX_TAIL_CALL_CNT and
subprog_tail1() returns because of MAX_TAIL_CALL_CNT limit,
bpf_tail_call_static() in suprog_tail2() is able to run because the
tail_call_cnt in subprog_tail2() propagated from entry() is less than
MAX_TAIL_CALL_CNT.
So, how many tailcalls are there for this case if no error happens?
From top-down view, does it look like hierarchy layer and layer?
With this view, there will be 2+4+8+...+2^33 = 2^34 - 2 = 17,179,869,182
tailcalls for this case.
How about there are N subprog_tail() in entry()? There will be almost
N^34 tailcalls.
Then, in this patch, it resolves this case on x86_64.
In stead of propagating tail_call_cnt from caller to callee, it
propagates its pointer, tail_call_cnt_ptr, tcc_ptr for short.
However, where does it store tail_call_cnt?
It stores tail_call_cnt on the stack of main prog. When tail call
happens in subprog, it increments tail_call_cnt by tcc_ptr.
Meanwhile, it stores tail_call_cnt_ptr on the stack of main prog, too.
And, before jump to tail callee, it has to pop tail_call_cnt and
tail_call_cnt_ptr.
Then, at the prologue of subprog, it must not make rax as
tail_call_cnt_ptr again. It has to reuse tail_call_cnt_ptr from caller.
As a result, at run time, it has to recognize rax is tail_call_cnt or
tail_call_cnt_ptr at prologue by:
1. rax is tail_call_cnt if rax is <= MAX_TAIL_CALL_CNT.
2. rax is tail_call_cnt_ptr if rax is > MAX_TAIL_CALL_CNT, because a
pointer won't be <= MAX_TAIL_CALL_CNT.
Here's an example to dump JITed.
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 1);
__uint(key_size, sizeof(__u32));
__uint(value_size, sizeof(__u32));
} jmp_table SEC(".maps");
int count = 0;
static __noinline
int subprog_tail(struct __sk_buff *skb)
{
bpf_tail_call_static(skb, &jmp_table, 0);
return 0;
}
SEC("tc")
int entry(struct __sk_buff *skb)
{
int ret = 1;
count++;
subprog_tail(skb);
subprog_tail(skb);
return ret;
}
When bpftool p d j id 42:
int entry(struct __sk_buff * skb):
bpf_prog_0c0f4c2413ef19b1_entry:
; int entry(struct __sk_buff *skb)
0: endbr64
4: nopl (%rax,%rax)
9: xorq %rax, %rax ;; rax = 0 (tail_call_cnt)
c: pushq %rbp
d: movq %rsp, %rbp
10: endbr64
14: cmpq $33, %rax ;; if rax > 33, rax = tcc_ptr
18: ja 0x20 ;; if rax > 33 goto 0x20 ---+
1a: pushq %rax ;; [rbp - 8] = rax = 0 |
1b: movq %rsp, %rax ;; rax = rbp - 8 |
1e: jmp 0x21 ;; ---------+ |
20: pushq %rax ;; <--------|---------------+
21: pushq %rax ;; <--------+ [rbp - 16] = rax
22: pushq %rbx ;; callee saved
23: movq %rdi, %rbx ;; rbx = skb (callee saved)
; count++;
26: movabsq $-82417199407104, %rdi
30: movl (%rdi), %esi
33: addl $1, %esi
36: movl %esi, (%rdi)
; subprog_tail(skb);
39: movq %rbx, %rdi ;; rdi = skb
3c: movq -16(%rbp), %rax ;; rax = tcc_ptr
43: callq 0x80 ;; call subprog_tail()
; subprog_tail(skb);
48: movq %rbx, %rdi ;; rdi = skb
4b: movq -16(%rbp), %rax ;; rax = tcc_ptr
52: callq 0x80 ;; call subprog_tail()
; return ret;
57: movl $1, %eax
5c: popq %rbx
5d: leave
5e: retq
int subprog_tail(struct __sk_buff * skb):
bpf_prog_3a140cef239a4b4f_subprog_tail:
; int subprog_tail(struct __sk_buff *skb)
0: endbr64
4: nopl (%rax,%rax)
9: nopl (%rax) ;; do not touch tail_call_cnt
c: pushq %rbp
d: movq %rsp, %rbp
10: endbr64
14: pushq %rax ;; [rbp - 8] = rax (tcc_ptr)
15: pushq %rax ;; [rbp - 16] = rax (tcc_ptr)
16: pushq %rbx ;; callee saved
17: pushq %r13 ;; callee saved
19: movq %rdi, %rbx ;; rbx = skb
; asm volatile("r1 = %[ctx]\n\t"
1c: movabsq $-105487587488768, %r13 ;; r13 = jmp_table
26: movq %rbx, %rdi ;; 1st arg, skb
29: movq %r13, %rsi ;; 2nd arg, jmp_table
2c: xorl %edx, %edx ;; 3rd arg, index = 0
2e: movq -16(%rbp), %rax ;; rax = [rbp - 16] (tcc_ptr)
35: cmpq $33, (%rax)
39: jae 0x4e ;; if *tcc_ptr >= 33 goto 0x4e --------+
3b: jmp 0x4e ;; jmp bypass, toggled by poking |
40: addq $1, (%rax) ;; (*tcc_ptr)++ |
44: popq %r13 ;; callee saved |
46: popq %rbx ;; callee saved |
47: popq %rax ;; undo rbp-16 push |
48: popq %rax ;; undo rbp-8 push |
49: nopl (%rax,%rax) ;; tail call target, toggled by poking |
; return 0; ;; |
4e: popq %r13 ;; restore callee saved <--------------+
50: popq %rbx ;; restore callee saved
51: leave
52: retq
Furthermore, when trampoline is the caller of bpf prog, which is
tail_call_reachable, it is required to propagate rax through trampoline.
Fixes: ebf7d1f508a7 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Fixes: e411901c0b77 ("bpf: allow for tailcalls in BPF subprograms for x64 JIT")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240714123902.32305-2-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Thu Aug 22 01:01:23 2024 -0700
bpf: correctly handle malformed BPF_CORE_TYPE_ID_LOCAL relos
[ Upstream commit 3d2786d65aaa954ebd3fcc033ada433e10da21c4 ]
In case of malformed relocation record of kind BPF_CORE_TYPE_ID_LOCAL
referencing a non-existing BTF type, function bpf_core_calc_relo_insn
would cause a null pointer deference.
Fix this by adding a proper check upper in call stack, as malformed
relocation records could be passed from user space.
Simplest reproducer is a program:
r0 = 0
exit
With a single relocation record:
.insn_off = 0, /* patch first instruction */
.type_id = 100500, /* this type id does not exist */
.access_str_off = 6, /* offset of string "0" */
.kind = BPF_CORE_TYPE_ID_LOCAL,
See the link for original reproducer or next commit for a test case.
Fixes: 74753e1462e7 ("libbpf: Replace btf__type_by_id() with btf_type_by_id().")
Reported-by: Liu RuiTong <cnitlrt@gmail.com>
Closes: https://lore.kernel.org/bpf/CAK55_s6do7C+DVwbwY_7nKfUz0YLDoiA1v6X3Y9+p0sWzipFSA@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240822080124.2995724-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yonghong Song <yonghong.song@linux.dev>
Date: Tue Jul 23 08:34:39 2024 -0700
bpf: Fail verification for sign-extension of packet data/data_end/data_meta
[ Upstream commit 92de36080c93296ef9005690705cba260b9bd68a ]
syzbot reported a kernel crash due to
commit 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses").
The reason is due to sign-extension of 32-bit load for
packet data/data_end/data_meta uapi field.
The original code looks like:
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
r3 = *(u32 *)(r1 + 80) /* load __sk_buff->data_end */
r0 = r2
r0 += 8
if r3 > r0 goto +1
...
Note that __sk_buff->data load has 32-bit sign extension.
After verification and convert_ctx_accesses(), the final asm code looks like:
r2 = *(u64 *)(r1 +208)
r2 = (s32)r2
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
...
Note that 'r2 = (s32)r2' may make the kernel __sk_buff->data address invalid
which may cause runtime failure.
Currently, in C code, typically we have
void *data = (void *)(long)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
and it will generate
r2 = *(u64 *)(r1 +208)
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
If we allow sign-extension,
void *data = (void *)(long)(int)skb->data;
void *data_end = (void *)(long)skb->data_end;
...
the generated code looks like
r2 = *(u64 *)(r1 +208)
r2 <<= 32
r2 s>>= 32
r3 = *(u64 *)(r1 +80)
r0 = r2
r0 += 8
if r3 > r0 goto pc+1
and this will cause verification failure since "r2 <<= 32" is not allowed
as "r2" is a packet pointer.
To fix this issue for case
r2 = *(s32 *)(r1 + 76) /* load __sk_buff->data */
this patch added additional checking in is_valid_access() callback
function for packet data/data_end/data_meta access. If those accesses
are with sign-extenstion, the verification will fail.
[1] https://lore.kernel.org/bpf/000000000000c90eee061d236d37@google.com/
Reported-by: syzbot+ad9ec60c8eaf69e6f99c@syzkaller.appspotmail.com
Fixes: 1f1e864b6555 ("bpf: Handle sign-extenstin ctx member accesses")
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240723153439.2429035-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Fri Sep 13 21:17:46 2024 +0200
bpf: Fix bpf_strtol and bpf_strtoul helpers for 32bit
[ Upstream commit cfe69c50b05510b24e26ccb427c7cc70beafd6c1 ]
The bpf_strtol() and bpf_strtoul() helpers are currently broken on 32bit:
The argument type ARG_PTR_TO_LONG is BPF-side "long", not kernel-side "long"
and therefore always considered fixed 64bit no matter if 64 or 32bit underlying
architecture.
This contract breaks in case of the two mentioned helpers since their BPF_CALL
definition for the helpers was added with {unsigned,}long *res. Meaning, the
transition from BPF-side "long" (BPF program) to kernel-side "long" (BPF helper)
breaks here.
Both helpers call __bpf_strtoll() with "long long" correctly, but later assigning
the result into 32-bit "*(long *)" on 32bit architectures. From a BPF program
point of view, this means upper bits will be seen as uninitialised.
Therefore, fix both BPF_CALL signatures to {s,u}64 types to fix this situation.
Now, changing also uapi/bpf.h helper documentation which generates bpf_helper_defs.h
for BPF programs is tricky: Changing signatures there to __{s,u}64 would trigger
compiler warnings (incompatible pointer types passing 'long *' to parameter of type
'__s64 *' (aka 'long long *')) for existing BPF programs.
Leaving the signatures as-is would be fine as from BPF program point of view it is
still BPF-side "long" and thus equivalent to __{s,u}64 on 64 or 32bit underlying
architectures.
Note that bpf_strtol() and bpf_strtoul() are the only helpers with this issue.
Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/481fcec8-c12c-9abb-8ecb-76c71c009959@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Xu Kuohai <xukuohai@huawei.com>
Date: Fri Jul 19 19:00:54 2024 +0800
bpf: Fix compare error in function retval_range_within
[ Upstream commit 763aa759d3b2c4f95b11855e3d37b860860107e2 ]
After checking lsm hook return range in verifier, the test case
"test_progs -t test_lsm" failed, and the failure log says:
libbpf: prog 'test_int_hook': BPF program load failed: Invalid argument
libbpf: prog 'test_int_hook': -- BEGIN PROG LOAD LOG --
0: R1=ctx() R10=fp0
; int BPF_PROG(test_int_hook, struct vm_area_struct *vma, @ lsm.c:89
0: (79) r0 = *(u64 *)(r1 +24) ; R0_w=scalar(smin=smin32=-4095,smax=smax32=0) R1=ctx()
[...]
24: (b4) w0 = -1 ; R0_w=0xffffffff
; int BPF_PROG(test_int_hook, struct vm_area_struct *vma, @ lsm.c:89
25: (95) exit
At program exit the register R0 has smin=4294967295 smax=4294967295 should have been in [-4095, 0]
It can be seen that instruction "w0 = -1" zero extended -1 to 64-bit
register r0, setting both smin and smax values of r0 to 4294967295.
This resulted in a false reject when r0 was checked with range [-4095, 0].
Given bpf lsm does not return 64-bit values, this patch fixes it by changing
the compare between r0 and return range from 64-bit operation to 32-bit
operation for bpf lsm.
Fixes: 8fa4ecd49b81 ("bpf: enforce exact retval range on subprog/callback exit")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240719110059.797546-5-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Fri Sep 13 21:17:48 2024 +0200
bpf: Fix helper writes to read-only maps
[ Upstream commit 32556ce93bc45c730829083cb60f95a2728ea48b ]
Lonial found an issue that despite user- and BPF-side frozen BPF map
(like in case of .rodata), it was still possible to write into it from
a BPF program side through specific helpers having ARG_PTR_TO_{LONG,INT}
as arguments.
In check_func_arg() when the argument is as mentioned, the meta->raw_mode
is never set. Later, check_helper_mem_access(), under the case of
PTR_TO_MAP_VALUE as register base type, it assumes BPF_READ for the
subsequent call to check_map_access_type() and given the BPF map is
read-only it succeeds.
The helpers really need to be annotated as ARG_PTR_TO_{LONG,INT} | MEM_UNINIT
when results are written into them as opposed to read out of them. The
latter indicates that it's okay to pass a pointer to uninitialized memory
as the memory is written to anyway.
However, ARG_PTR_TO_{LONG,INT} is a special case of ARG_PTR_TO_FIXED_SIZE_MEM
just with additional alignment requirement. So it is better to just get
rid of the ARG_PTR_TO_{LONG,INT} special cases altogether and reuse the
fixed size memory types. For this, add MEM_ALIGNED to additionally ensure
alignment given these helpers write directly into the args via *<ptr> = val.
The .arg*_size has been initialized reflecting the actual sizeof(*<ptr>).
MEM_ALIGNED can only be used in combination with MEM_FIXED_SIZE annotated
argument types, since in !MEM_FIXED_SIZE cases the verifier does not know
the buffer size a priori and therefore cannot blindly write *<ptr> = val.
Fixes: 57c3bb725a3d ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oleg Nesterov <oleg@redhat.com>
Date: Thu Sep 19 15:28:53 2024 +0200
bpf: Fix use-after-free in bpf_uprobe_multi_link_attach()
commit 5fe6e308abaea082c20fbf2aa5df8e14495622cf upstream.
If bpf_link_prime() fails, bpf_uprobe_multi_link_attach() goes to the
error_free label and frees the array of bpf_uprobe's without calling
bpf_uprobe_unregister().
This leaks bpf_uprobe->uprobe and worse, this frees bpf_uprobe->consumer
without removing it from the uprobe->consumers list.
Fixes: 89ae89f53d20 ("bpf: Add multi uprobe link")
Closes: https://lore.kernel.org/all/000000000000382d39061f59f2dd@google.com/
Reported-by: syzbot+f7a1c2c2711e4a780f19@syzkaller.appspotmail.com
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: syzbot+f7a1c2c2711e4a780f19@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240813152524.GA7292@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Fri Sep 13 21:17:49 2024 +0200
bpf: Improve check_raw_mode_ok test for MEM_UNINIT-tagged types
[ Upstream commit 18752d73c1898fd001569195ba4b0b8c43255f4a ]
When checking malformed helper function signatures, also take other argument
types into account aside from just ARG_PTR_TO_UNINIT_MEM.
This concerns (formerly) ARG_PTR_TO_{INT,LONG} given uninitialized memory can
be passed there, too.
The func proto sanity check goes back to commit 435faee1aae9 ("bpf, verifier:
add ARG_PTR_TO_RAW_STACK type"), and its purpose was to detect wrong func protos
which had more than just one MEM_UNINIT-tagged type as arguments.
The reason more than one is currently not supported is as we mark stack slots with
STACK_MISC in check_helper_call() in case of raw mode based on meta.access_size to
allow uninitialized stack memory to be passed to helpers when they just write into
the buffer.
Probing for base type as well as MEM_UNINIT tagging ensures that other types do not
get missed (as it used to be the case for ARG_PTR_TO_{INT,LONG}).
Fixes: 57c3bb725a3d ("bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types")
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20240913191754.13290-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Song Liu <song@kernel.org>
Date: Tue Sep 10 22:55:08 2024 -0700
bpf: lsm: Set bpf_lsm_blob_sizes.lbs_task to 0
commit 300a90b2cb5d442879e6398920c49aebbd5c8e40 upstream.
bpf task local storage is now using task_struct->bpf_storage, so
bpf_lsm_blob_sizes.lbs_task is no longer needed. Remove it to save some
memory.
Fixes: a10787e6d58c ("bpf: Enable task local storage for tracing programs")
Cc: stable@vger.kernel.org
Cc: KP Singh <kpsingh@kernel.org>
Cc: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20240911055508.9588-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniel Borkmann <daniel@iogearbox.net>
Date: Fri Sep 13 21:17:50 2024 +0200
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
[ Upstream commit 4b3786a6c5397dc220b1483d8e2f4867743e966f ]
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.
Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again.
Fixes: 8a67f2de9b1d ("bpf: expose bpf_strtol and bpf_strtoul to all program types")
Fixes: d7a4cb9b6705 ("bpf: Introduce bpf_strtol and bpf_strtoul helpers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/e5edd241-59e7-5e39-0ee5-a51e31b6840a@iogearbox.net
Link: https://lore.kernel.org/r/20240913191754.13290-5-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Luca Stefani <luca.stefani.ge1@gmail.com>
Date: Mon Sep 2 13:10:53 2024 +0200
btrfs: always update fstrim_range on failure in FITRIM ioctl
commit 3368597206dc3c6c3c2247ee146beada14c67380 upstream.
Even in case of failure we could've discarded some data and userspace
should be made aware of it, so copy fstrim_range to userspace
regardless.
Also make sure to update the trimmed bytes amount even if
btrfs_trim_free_extents fails.
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Tue Sep 3 10:55:36 2024 +0100
btrfs: fix race setting file private on concurrent lseek using same fd
commit 7ee85f5515e86a4e2a2f51969795920733912bad upstream.
When doing concurrent lseek(2) system calls against the same file
descriptor, using multiple threads belonging to the same process, we have
a short time window where a race happens and can result in a memory leak.
The race happens like this:
1) A program opens a file descriptor for a file and then spawns two
threads (with the pthreads library for example), lets call them
task A and task B;
2) Task A calls lseek with SEEK_DATA or SEEK_HOLE and ends up at
file.c:find_desired_extent() while holding a read lock on the inode;
3) At the start of find_desired_extent(), it extracts the file's
private_data pointer into a local variable named 'private', which has
a value of NULL;
4) Task B also calls lseek with SEEK_DATA or SEEK_HOLE, locks the inode
in shared mode and enters file.c:find_desired_extent(), where it also
extracts file->private_data into its local variable 'private', which
has a NULL value;
5) Because it saw a NULL file private, task A allocates a private
structure and assigns to the file structure;
6) Task B also saw a NULL file private so it also allocates its own file
private and then assigns it to the same file structure, since both
tasks are using the same file descriptor.
At this point we leak the private structure allocated by task A.
Besides the memory leak, there's also the detail that both tasks end up
using the same cached state record in the private structure (struct
btrfs_file_private::llseek_cached_state), which can result in a
use-after-free problem since one task can free it while the other is
still using it (only one task took a reference count on it). Also, sharing
the cached state is not a good idea since it could result in incorrect
results in the future - right now it should not be a problem because it
end ups being used only in extent-io-tree.c:count_range_bits() where we do
range validation before using the cached state.
Fix this by protecting the private assignment and check of a file while
holding the inode's spinlock and keep track of the task that allocated
the private, so that it's used only by that task in order to prevent
user-after-free issues with the cached state record as well as potentially
using it incorrectly in the future.
Fixes: 3c32c7212f16 ("btrfs: use cached state when looking for delalloc ranges with lseek")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Fri Aug 30 16:35:48 2024 +0930
btrfs: subpage: fix the bitmap dump which can cause bitmap corruption
commit 77b0b98bb743f5d04d8f995ba1936e1143689d4a upstream.
In commit 75258f20fb70 ("btrfs: subpage: dump extra subpage bitmaps for
debug") an internal macro GET_SUBPAGE_BITMAP() is introduced to grab the
bitmap of each attribute.
But that commit is using bitmap_cut() which will do the left shift of
the larger bitmap, causing incorrect values.
Thankfully this bitmap_cut() is only called for debug usage, and so far
it's not yet causing problem.
Fix it to use bitmap_read() to only grab the desired sub-bitmap.
Fixes: 75258f20fb70 ("btrfs: subpage: dump extra subpage bitmaps for debug")
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qu Wenruo <wqu@suse.com>
Date: Wed Sep 11 07:06:45 2024 +0930
btrfs: tree-checker: fix the wrong output of data backref objectid
commit b0b595e61d97de61c15b379b754b2caa90e83e5c upstream.
[BUG]
There are some reports about invalid data backref objectids, the report
looks like this:
BTRFS critical (device sda): corrupt leaf: block=333654787489792 slot=110 extent bytenr=333413935558656 len=65536 invalid data ref objectid value 2543
The data ref objectid is the inode number inside the subvolume.
But in above case, the value is completely sane, not really showing the
problem.
[CAUSE]
The root cause of the problem is the deprecated feature, inode cache.
This feature results a special inode number, -12ULL, and it's no longer
recognized by tree-checker, triggering the error.
The direct problem here is the output of data ref objectid. The value
shown is in fact the dref_root (subvolume id), not the dref_objectid
(inode number).
[FIX]
Fix the output to use dref_objectid instead.
Reported-by: Neil Parton <njparton@gmail.com>
Reported-by: Archange <archange@archlinux.org>
Link: https://lore.kernel.org/linux-btrfs/CAAYHqBbrrgmh6UmW3ANbysJX9qG9Pbg3ZwnKsV=5mOpv_qix_Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-btrfs/9541deea-9056-406e-be16-a996b549614d@archlinux.org/
Fixes: f333a3c7e832 ("btrfs: tree-checker: validate dref root and objectid")
CC: stable@vger.kernel.org # 6.11
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Mon Aug 26 07:49:34 2024 +0200
bus: integrator-lm: fix OF node leak in probe()
commit 15a62b81175885b5adfcaf49870466e3603f06c7 upstream.
Driver code is leaking OF node reference from of_find_matching_node() in
probe().
Fixes: ccea5e8a5918 ("bus: Add driver for Integrator/AP logic modules")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/20240826054934.10724-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Tue Aug 20 10:04:39 2024 +0200
bus: mhi: host: pci_generic: Fix the name for the Telit FE990A
commit bfc5ca0fd1ea7aceae0b682fa4bd8079c52f96c8 upstream.
Add a mhi_pci_dev_info struct specific for the Telit FE990A modem in
order to use the correct product name.
Cc: stable@vger.kernel.org # 6.1+
Fixes: 0724869ede9c ("bus: mhi: host: pci_generic: add support for Telit FE990 modem")
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240820080439.837666-1-fabio.porcedda@gmail.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Howells <dhowells@redhat.com>
Date: Tue Jul 23 15:35:29 2024 +0100
cachefiles: Fix non-taking of sb_writers around set/removexattr
[ Upstream commit 80887f31672970abae3aaa9cf62ac72a124e7c89 ]
Unlike other vfs_xxxx() calls, vfs_setxattr() and vfs_removexattr() don't
take the sb_writers lock, so the caller should do it for them.
Fix cachefiles to do this.
Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Christian Brauner <brauner@kernel.org>
cc: Gao Xiang <xiang@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-erofs@lists.ozlabs.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20240814203850.2240469-3-dhowells@redhat.com/ # v2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kuniyuki Iwashima <kuniyu@amazon.com>
Date: Wed Sep 4 18:22:37 2024 -0700
can: bcm: Clear bo->bcm_proc_read after remove_proc_entry().
[ Upstream commit 94b0818fa63555a65f6ba107080659ea6bcca63e ]
syzbot reported a warning in bcm_release(). [0]
The blamed change fixed another warning that is triggered when
connect() is issued again for a socket whose connect()ed device has
been unregistered.
However, if the socket is just close()d without the 2nd connect(), the
remaining bo->bcm_proc_read triggers unnecessary remove_proc_entry()
in bcm_release().
Let's clear bo->bcm_proc_read after remove_proc_entry() in bcm_notify().
[0]
name '4986'
WARNING: CPU: 0 PID: 5234 at fs/proc/generic.c:711 remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Modules linked in:
CPU: 0 UID: 0 PID: 5234 Comm: syz-executor606 Not tainted 6.11.0-rc5-syzkaller-00178-g5517ae241919 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:remove_proc_entry+0x2e7/0x5d0 fs/proc/generic.c:711
Code: ff eb 05 e8 cb 1e 5e ff 48 8b 5c 24 10 48 c7 c7 e0 f7 aa 8e e8 2a 38 8e 09 90 48 c7 c7 60 3a 1b 8c 48 89 de e8 da 42 20 ff 90 <0f> 0b 90 90 48 8b 44 24 18 48 c7 44 24 40 0e 36 e0 45 49 c7 04 07
RSP: 0018:ffffc9000345fa20 EFLAGS: 00010246
RAX: 2a2d0aee2eb64600 RBX: ffff888032f1f548 RCX: ffff888029431e00
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc9000345fb08 R08: ffffffff8155b2f2 R09: 1ffff1101710519a
R10: dffffc0000000000 R11: ffffed101710519b R12: ffff888011d38640
R13: 0000000000000004 R14: 0000000000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8880b8800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcfb52722f0 CR3: 000000000e734000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
bcm_release+0x250/0x880 net/can/bcm.c:1578
__sock_release net/socket.c:659 [inline]
sock_close+0xbc/0x240 net/socket.c:1421
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:882
do_group_exit+0x207/0x2c0 kernel/exit.c:1031
__do_sys_exit_group kernel/exit.c:1042 [inline]
__se_sys_exit_group kernel/exit.c:1040 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcfb51ee969
Code: Unable to access opcode bytes at 0x7fcfb51ee93f.
RSP: 002b:00007ffce0109ca8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fcfb51ee969
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001
RBP: 00007fcfb526f3b0 R08: ffffffffffffffb8 R09: 0000555500000000
R10: 0000555500000000 R11: 0000000000000246 R12: 00007fcfb526f3b0
R13: 0000000000000000 R14: 00007fcfb5271ee0 R15: 00007fcfb51bf160
</TASK>
Fixes: 76fe372ccb81 ("can: bcm: Remove proc entry when dev is unregistered.")
Reported-by: syzbot+0532ac7a06fb1a03187e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0532ac7a06fb1a03187e
Tested-by: syzbot+0532ac7a06fb1a03187e@syzkaller.appspotmail.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240905012237.79683-1-kuniyu@amazon.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Mätje <stefan.maetje@esd.eu>
Date: Thu Sep 5 00:27:40 2024 +0200
can: esd_usb: Remove CAN_CTRLMODE_3_SAMPLES for CAN-USB/3-FD
commit 75b3189540578f96b4996e4849b6649998f49455 upstream.
Remove the CAN_CTRLMODE_3_SAMPLES announcement for CAN-USB/3-FD devices
because these devices don't support it.
The hardware has a Microchip SAM E70 microcontroller that uses a Bosch
MCAN IP core as CAN FD controller. But this MCAN core doesn't support
triple sampling.
Fixes: 80662d943075 ("can: esd_usb: Add support for esd CAN-USB/3")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20240904222740.2985864-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhang Changzhong <zhangchangzhong@huawei.com>
Date: Thu Aug 29 20:48:23 2024 +0800
can: j1939: use correct function name in comment
[ Upstream commit dc2ddcd136fe9b6196a7dd01f75f824beb02d43f ]
The function j1939_cancel_all_active_sessions() was renamed to
j1939_cancel_active_session() but name in comment wasn't updated.
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://patch.msgid.link/1724935703-44621-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jake Hamby <Jake.Hamby@Teledyne.com>
Date: Fri Sep 6 23:19:51 2024 +0000
can: m_can: enable NAPI before enabling interrupts
[ Upstream commit 801ad2f87b0c6d0c34a75a4efd6bfd3a2d9f9298 ]
If an interrupt (RX-complete or error flag) is set when bringing up
the CAN device, e.g. due to CAN bus traffic before initializing the
device, when m_can_start() is called and interrupts are enabled,
m_can_isr() is called immediately, which disables all CAN interrupts
and calls napi_schedule().
Because napi_enable() isn't called until later in m_can_open(), the
call to napi_schedule() never schedules the m_can_poll() callback and
the device is left with interrupts disabled and can't receive any CAN
packets until rebooted.
This can be verified by running "cansend" from another device before
setting the bitrate and calling "ip link set up can0" on the test
device. Adding debug lines to m_can_isr() shows it's called with flags
(IR_EP | IR_EW | IR_CRCE), which calls m_can_disable_all_interrupts()
and napi_schedule(), and then m_can_poll() is never called.
Move the call to napi_enable() above the call to m_can_start() to
enable any initial interrupt flags to be handled by m_can_poll() so
that interrupts are reenabled. Add a call to napi_disable() in the
error handling section of m_can_open(), to handle the case where later
functions return errors.
Also, in m_can_close(), move the call to napi_disable() below the call
to m_can_stop() to ensure all interrupts are handled when bringing
down the device. This race condition is much less likely to occur.
Tested on a Microchip SAMA7G54 MPU. The fix should be applicable to
any SoC with a Bosch M_CAN controller.
Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-1-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon Sep 9 15:07:41 2024 +0200
can: m_can: m_can_close(): stop clocks after device has been shut down
[ Upstream commit 2c09b50efcad985cf920ca88baa9aa52b1999dcc ]
After calling m_can_stop() an interrupt may be pending or NAPI might
still be executed. This means the driver might still touch registers
of the IP core after the clocks have been disabled. This is not good
practice and might lead to aborts depending on the SoC integration.
To avoid these potential problems, make m_can_close() symmetric to
m_can_open(), i.e. stop the clocks at the end, right before shutting
down the transceiver.
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-2-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Date: Sun Jul 14 17:13:15 2024 +0300
clk: at91: sama7g5: Allocate only the needed amount of memory for PLLs
[ Upstream commit 2d6e9ee7cb3e79b1713783c633b13af9aeffc90c ]
The maximum number of PLL components on SAMA7G5 is 3 (one fractional
part and 2 dividers). Allocate the needed amount of memory for
sama7g5_plls 2d array. Previous code used to allocate 7 array entries for
each PLL. While at it, replace 3 with PLL_COMPID_MAX in the loop which
parses the sama7g5_plls 2d array.
Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5")
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240714141315.19480-1-claudiu.beznea@tuxon.dev
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shengjiu Wang <shengjiu.wang@nxp.com>
Date: Fri Jun 14 15:42:03 2024 +0800
clk: imx: clk-audiomix: Correct parent clock for earc_phy and audpll
[ Upstream commit d40371a1c963db688b37826adaf5ffdafb0862a1 ]
According to Reference Manual of i.MX8MP
The parent clock of "earc_phy" is "sai_pll_out_div2",
The parent clock of "audpll" is "osc_24m".
Add CLK_GATE_PARENT() macro for usage of specifying parent clock.
Fixes: 6cd95f7b151c ("clk: imx: imx8mp: Add audiomix block control")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1718350923-21392-6-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ye Li <ye.li@nxp.com>
Date: Fri Jun 7 21:33:35 2024 +0800
clk: imx: composite-7ulp: Check the PCC present bit
[ Upstream commit 4717ccadb51e2630790dddd222830702de17f090 ]
When some module is disabled by fuse, its PCC PR bit is default 0 and
PCC is not operational. Any write to this PCC will cause SError.
Fixes: b40ba8065347 ("clk: imx: Update the compsite driver to support imx8ulp")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-4-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Jun 7 21:33:33 2024 +0800
clk: imx: composite-8m: Enable gate clk with mcore_booted
[ Upstream commit 8f32e9dd0916eb3fd4bcf550ed1d04542a65cb9e ]
Bootloader might disable some CCM ROOT Slices. So if mcore_booted set with
display CCM ROOT disabled by Bootloader, kernel display BLK CTRL driver
imx8m_blk_ctrl_driver_init may hang the system because the BUS clk is
disabled.
Add back gate ops, but with disable doing nothing, then the CCM ROOT
will be enabled when used.
Fixes: bb7e897b002a ("clk: imx8m: check mcore_booted before register clk")
Reviewed-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-2-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jacky Bai <ping.bai@nxp.com>
Date: Fri Jun 7 21:33:34 2024 +0800
clk: imx: composite-93: keep root clock on when mcore enabled
[ Upstream commit d342df11726bfac9c3a9d2037afa508ac0e9e44e ]
Previously we assumed that the root clock slice is enabled
by default when kernel boot up. But the bootloader may disable
the clocks before jump into kernel. The gate ops should be registered
rather than NULL to make sure the disabled clock can be enabled
when kernel boot up. Refine the code to skip disable the clock
if mcore booted.
Fixes: a740d7350ff7 ("clk: imx: imx93: add mcore_booted module paratemter")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Chancel Liu <chancel.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-3-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pengfei Li <pengfei.li_1@nxp.com>
Date: Fri Jun 7 21:33:36 2024 +0800
clk: imx: fracn-gppll: fix fractional part of PLL getting lost
[ Upstream commit 7622f888fca125ae46f695edf918798ebc0506c5 ]
Fractional part of PLL gets lost after re-enabling the PLL. the
MFN can NOT be automatically loaded when doing frac PLL enable/disable,
So when re-enable PLL, configure mfn explicitly.
Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-5-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastien Laveze <slaveze@smartandconnective.com>
Date: Tue May 28 17:14:33 2024 +0200
clk: imx: imx6ul: fix default parent for enet*_ref_sel
[ Upstream commit e52fd71333b4ed78fd5bb43094bdc46476614d25 ]
The clk_set_parent for "enet1_ref_sel" and "enet2_ref_sel" are
incorrect, therefore the original requirements to have "enet_clk_ref" as
output sourced by iMX ENET PLL as a default config is not met.
Only "enet[1,2]_ref_125m" "enet[1,2]_ref_pad" are possible parents for
"enet1_ref_sel" and "enet2_ref_sel".
This was observed as a regression using a custom device tree which was
expecting this default config.
This can be fixed at the device tree level but having a default config
matching the original behavior (before refclock mux) will avoid breaking
existing configs.
Fixes: 4e197ee880c2 ("clk: imx6ul: add ethernet refclock mux support")
Link: https://lore.kernel.org/lkml/20230306020226.GC143566@dragon/T/
Signed-off-by: Sebastien Laveze <slaveze@smartandconnective.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240528151434.227602-1-slaveze@smartandconnective.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Date: Fri Jun 7 21:33:38 2024 +0800
clk: imx: imx8mp: fix clock tree update of TF-A managed clocks
[ Upstream commit 3d29036853b9cb07ac49e8261fca82a940be5c41 ]
On the i.MX8M*, the TF-A exposes a SiP (Silicon Provider) service
for DDR frequency scaling. The imx8m-ddrc-devfreq driver calls the
SiP and then does clk_set_parent on the DDR muxes to synchronize
the clock tree.
since commit 936c383673b9 ("clk: imx: fix composite peripheral flags"),
these TF-A managed muxes have SET_PARENT_GATE set, which results
in imx8m-ddrc-devfreq's clk_set_parent after SiP failing with -EBUSY:
clk_set_parent(dram_apb_src, sys1_pll_40m);(busfreq-imx8mq.c)
commit 926bf91248dd
("clk: imx8m: fix clock tree update of TF-A managed clocks") adds this
method and enables 8mm, 8mn and 8mq. i.MX8MP also needs it.
This is safe to do, because updating the Linux clock tree to reflect
reality will always be glitch-free.
Another reason to this patch is that powersave image BT music
requires dram to be 400MTS, so clk_set_parent(dram_alt_src,
sys1_pll_800m); is required. Without this patch, it will not succeed.
Fixes: 936c383673b9 ("clk: imx: fix composite peripheral flags")
Signed-off-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-7-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Jun 7 21:33:46 2024 +0800
clk: imx: imx8qxp: Parent should be initialized earlier than the clock
[ Upstream commit 766c386c16c9899461b83573a06380d364c6e261 ]
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: babfaa9556d7 ("clk: imx: scu: add more scu clocks")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-15-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Jun 7 21:33:45 2024 +0800
clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk
[ Upstream commit e61352d5ecdc0da2e7253121c15d9a3e040f78a1 ]
The initialization order of SCU clocks affects the sequence of SCU clock
resume. If there are no other effects, the earlier the initialization,
the earlier the resume. During SCU clock resume, the clock rate is
restored. As SCFW guidelines, configure the parent clock rate before
configuring the child rate.
Fixes: 91e916771de0 ("clk: imx: scu: remove legacy scu clock binding support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240607133347.3291040-14-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Sun Aug 4 08:40:06 2024 +0300
clk: qcom: dispcc-sm8250: use special function for Lucid 5LPE PLL
[ Upstream commit 362be5cbaec2a663eb86b7105313368b4a71fc1e ]
According to msm-5.10 the lucid 5lpe PLLs have require slightly
different configuration that trion / lucid PLLs, it doesn't set
PLL_UPDATE_BYPASS bit. Add corresponding function and use it for the
display clock controller on Qualcomm SM8350 platform.
Fixes: 205737fe3345 ("clk: qcom: add support for SM8350 DISPCC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-2-1149dd8399fe@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jul 17 13:04:28 2024 +0300
clk: qcom: dispcc-sm8550: fix several supposed typos
[ Upstream commit 7b6a4b907297b28727933493b9e0c95494504634 ]
Fix seveal odd-looking places in SM8550's dispcc driver:
- duplicate entries in disp_cc_parent_map_4 and disp_cc_parent_map_5
- using &disp_cc_mdss_dptx0_link_div_clk_src as a source for
disp_cc_mdss_dptx1_usb_router_link_intf_clk
The SM8650 driver has been used as a reference.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-1-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jul 17 13:04:29 2024 +0300
clk: qcom: dispcc-sm8550: use rcg2_ops for mdss_dptx1_aux_clk_src
[ Upstream commit cb4c00698f2f27d99a69adcce659370ca286cf2a ]
clk_dp_ops should only be used for DisplayPort pixel clocks. Use
clk_rcg2_ops for disp_cc_mdss_dptx1_aux_clk_src.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-2-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jul 17 13:04:32 2024 +0300
clk: qcom: dispcc-sm8550: use rcg2_shared_ops for ESC RCGs
[ Upstream commit c8bee3ff6c9220092b646ff929f9c832c1adab6d ]
Follow the recommendations and park disp_cc_mdss_esc[01]_clk_src to the
XO instead of disabling the clocks by using the clk_rcg2_shared_ops.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-5-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jul 17 13:04:31 2024 +0300
clk: qcom: dispcc-sm8650: Update the GDSC flags
[ Upstream commit 7de10ddbdb9d03651cff5fbdc8cf01837c698526 ]
Add missing POLL_CFG_GDSCR to the MDSS GDSC flags.
Fixes: 90114ca11476 ("clk: qcom: add SM8550 DISPCC driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240717-dispcc-sm8550-fixes-v2-4-5c4a3128c40b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Varadarajan Narayanan <quic_varada@quicinc.com>
Date: Tue Jul 30 11:18:15 2024 +0530
clk: qcom: ipq5332: Register gcc_qdss_tsctr_clk_src
[ Upstream commit 0e1ac23dfa3f635e486fdeb08206b981cb0a2a6b ]
gcc_qdss_tsctr_clk_src (enabled in the boot loaders and dependent
on gpll4_main) was not registered as one of the ipq5332 clocks.
Hence clk_disable_unused() disabled 'gpll4_main' assuming there
were no consumers for 'gpll4_main' resulting in system freeze or
reboots.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 3d89d52970fd ("clk: qcom: add Global Clock controller (GCC) driver for IPQ5332 SoC")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20240730054817.1915652-4-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Shiyan <eagle.alexander923@gmail.com>
Date: Thu Aug 29 08:28:20 2024 +0300
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
[ Upstream commit 0d02e8d284a45bfa8997ebe8764437b8eb6b108b ]
The 32kHz input clock is named "xin32k" in the driver,
so the name "32k" appears to be a typo in this case. Lets fix this.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Fixes: f1c506d152ff ("clk: rockchip: add clock controller for the RK3588")
Link: https://lore.kernel.org/r/20240829052820.3604-1-eagle.alexander923@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonas Karlman <jonas@kwiboo.se>
Date: Sat Jun 15 17:03:53 2024 +0000
clk: rockchip: Set parent rate for DCLK_VOP clock on RK3228
[ Upstream commit 1d34b9757523c1ad547bd6d040381f62d74a3189 ]
Similar to DCLK_LCDC on RK3328, the DCLK_VOP on RK3228 is typically
parented by the hdmiphy clk and it is expected that the DCLK_VOP and
hdmiphy clk rate are kept in sync.
Use CLK_SET_RATE_PARENT and CLK_SET_RATE_NO_REPARENT flags, same as used
on RK3328, to make full use of all possible supported display modes.
Fixes: 0a9d4ac08ebc ("clk: rockchip: set the clock ids for RK3228 VOP")
Fixes: 307a2e9ac524 ("clk: rockchip: add clock controller for rk3228")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20240615170417.3134517-3-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuntao Liu <liuyuntao12@huawei.com>
Date: Thu Aug 15 09:38:53 2024 +0000
clk: starfive: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
[ Upstream commit 55c312c1b2be6d43e39c280ad6ab4b711e545b89 ]
We need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.
Fixes: dae5448a327ed ("clk: starfive: Add StarFive JH7110 Video-Output clock driver")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/r/20240815093853.757487-1-liuyuntao12@huawei.com
Reviewed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Lechner <dlechner@baylibre.com>
Date: Mon Aug 26 10:35:29 2024 -0500
clk: ti: dra7-atl: Fix leak of of_nodes
[ Upstream commit 9d6e9f10e2e031fb7bfb3030a7d1afc561a28fea ]
This fix leaking the of_node references in of_dra7_atl_clk_probe().
The docs for of_parse_phandle_with_args() say that the caller must call
of_node_put() on the returned node. This adds the missing of_node_put()
to fix the leak.
Fixes: 9ac33b0ce81f ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240826-clk-fix-leak-v1-1-f55418a13aa6@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Date: Sat Jul 13 15:27:13 2024 +0530
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
[ Upstream commit ca140a0dc0a18acd4653b56db211fec9b2339986 ]
Add the missing iounmap() when clock frequency fails to get read by the
of_property_read_u32() call, or if the call to msm_timer_init() fails.
Fixes: 6e3321631ac2 ("ARM: msm: Add DT support to msm_timer")
Signed-off-by: Ankit Agrawal <agrawal.ag.ankit@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240713095713.GA430091@bnew-VirtualBox
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tiezhu Yang <yangtiezhu@loongson.cn>
Date: Tue Sep 24 14:27:10 2024 +0800
compiler.h: specify correct attribute for .rodata..c_jump_table
commit c5b1184decc819756ae549ba54c63b6790c4ddfd upstream.
Currently, there is an assembler message when generating kernel/bpf/core.o
under CONFIG_OBJTOOL with LoongArch compiler toolchain:
Warning: setting incorrect section attributes for .rodata..c_jump_table
This is because the section ".rodata..c_jump_table" should be readonly,
but there is a "W" (writable) part of the flags:
$ readelf -S kernel/bpf/core.o | grep -A 1 "rodata..c"
[34] .rodata..c_j[...] PROGBITS 0000000000000000 0000d2e0
0000000000000800 0000000000000000 WA 0 0 8
There is no above issue on x86 due to the generated section flag is only
"A" (allocatable). In order to silence the warning on LoongArch, specify
the attribute like ".rodata..c_jump_table,\"a\",@progbits #" explicitly,
then the section attribute of ".rodata..c_jump_table" must be readonly
in the kernel/bpf/core.o file.
Before:
$ objdump -h kernel/bpf/core.o | grep -A 1 "rodata..c"
21 .rodata..c_jump_table 00000800 0000000000000000 0000000000000000 0000d2e0 2**3
CONTENTS, ALLOC, LOAD, RELOC, DATA
After:
$ objdump -h kernel/bpf/core.o | grep -A 1 "rodata..c"
21 .rodata..c_jump_table 00000800 0000000000000000 0000000000000000 0000d2e0 2**3
CONTENTS, ALLOC, LOAD, RELOC, READONLY, DATA
By the way, AFAICT, maybe the root cause is related with the different
compiler behavior of various archs, so to some extent this change is a
workaround for LoongArch, and also there is no effect for x86 which is the
only port supported by objtool before LoongArch with this patch.
Link: https://lkml.kernel.org/r/20240924062710.1243-1-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org> [6.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jie Gan <quic_jiegan@quicinc.com>
Date: Mon Aug 12 12:28:44 2024 +0800
Coresight: Set correct cs_mode for dummy source to fix disable issue
[ Upstream commit e6b64cda393efd84709ab3df2e42d36d36d7553e ]
The coresight_disable_source_sysfs function should verify the
mode of the coresight device before disabling the source.
However, the mode for the dummy source device is always set to
CS_MODE_DISABLED, resulting in the check consistently failing.
As a result, dummy source cannot be properly disabled.
Configure CS_MODE_SYSFS/CS_MODE_PERF during the enablement.
Configure CS_MODE_DISABLED during the disablement.
Fixes: 9d3ba0b6c056 ("Coresight: Add coresight dummy driver")
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240812042844.2890115-1-quic_jiegan@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jie Gan <quic_jiegan@quicinc.com>
Date: Mon Aug 12 12:30:43 2024 +0800
Coresight: Set correct cs_mode for TPDM to fix disable issue
[ Upstream commit 14f5fa9b5fcbe2b3d5098893aba6ad62254d2ef6 ]
The coresight_disable_source_sysfs function should verify the
mode of the coresight device before disabling the source.
However, the mode for the TPDM device is always set to
CS_MODE_DISABLED, resulting in the check consistently failing.
As a result, TPDM cannot be properly disabled.
Configure CS_MODE_SYSFS/CS_MODE_PERF during the enablement.
Configure CS_MODE_DISABLED during the disablement.
Fixes: b3c71626a933 ("Coresight: Add coresight TPDM source driver")
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240812043043.2890694-1-quic_jiegan@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Suzuki K Poulose <suzuki.poulose@arm.com>
Date: Tue Jul 2 14:28:46 2024 +0100
coresight: tmc: sg: Do not leak sg_table
[ Upstream commit c58dc5a1f886f2fcc1133746d0cbaa1fe7fd44ff ]
Running perf with cs_etm on Juno triggers the following kmemleak warning !
:~# cat /sys/kernel/debug/kmemleak
unreferenced object 0xffffff8806b6d720 (size 96):
comm "perf", pid 562, jiffies 4297810960
hex dump (first 32 bytes):
38 d8 13 07 88 ff ff ff 00 d0 9e 85 c0 ff ff ff 8...............
00 10 00 88 c0 ff ff ff 00 f0 ff f7 ff 00 00 00 ................
backtrace (crc 1dbf6e00):
[<ffffffc08107381c>] kmemleak_alloc+0xbc/0xd8
[<ffffffc0802f9798>] kmalloc_trace_noprof+0x220/0x2e8
[<ffffffc07bb71948>] tmc_alloc_sg_table+0x48/0x208 [coresight_tmc]
[<ffffffc07bb71cbc>] tmc_etr_alloc_sg_buf+0xac/0x240 [coresight_tmc]
[<ffffffc07bb72538>] tmc_alloc_etr_buf.constprop.0+0x1f0/0x260 [coresight_tmc]
[<ffffffc07bb7280c>] alloc_etr_buf.constprop.0.isra.0+0x74/0xa8 [coresight_tmc]
[<ffffffc07bb72950>] tmc_alloc_etr_buffer+0x110/0x260 [coresight_tmc]
[<ffffffc07bb38afc>] etm_setup_aux+0x204/0x3b0 [coresight]
[<ffffffc08025837c>] rb_alloc_aux+0x20c/0x318
[<ffffffc08024dd84>] perf_mmap+0x2e4/0x7a0
[<ffffffc0802cceb0>] mmap_region+0x3b0/0xa08
[<ffffffc0802cd8a8>] do_mmap+0x3a0/0x500
[<ffffffc080295328>] vm_mmap_pgoff+0x100/0x1d0
[<ffffffc0802cadf8>] ksys_mmap_pgoff+0xb8/0x110
[<ffffffc080020688>] __arm64_sys_mmap+0x38/0x58
[<ffffffc080028fc0>] invoke_syscall.constprop.0+0x58/0x100
This due to the fact that we do not free the "sg_table" itself while
freeing up the SG table and data pages. Fix this by freeing the sg_table
in tmc_free_sg_table().
Fixes: 99443ea19e8b ("coresight: Add generic TMC sg table framework")
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240702132846.1677261-1-suzuki.poulose@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nishanth Menon <nm@ti.com>
Date: Wed Aug 28 08:19:15 2024 -0500
cpufreq: ti-cpufreq: Introduce quirks to handle syscon fails appropriately
[ Upstream commit abc00ffda43bd4ba85896713464c7510c39f8165 ]
Commit b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx
and omap36xx") introduced special handling for OMAP3 class devices
where syscon node may not be present. However, this also creates a bug
where the syscon node is present, however the offset used to read
is beyond the syscon defined range.
Fix this by providing a quirk option that is populated when such
special handling is required. This allows proper failure for all other
platforms when the syscon node and efuse offsets are mismatched.
Fixes: b4bc9f9e27ed ("cpufreq: ti-cpufreq: add support for omap34xx and omap36xx")
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Tue Aug 20 11:40:22 2024 +0200
cpuidle: riscv-sbi: Use scoped device node handling to fix missing of_node_put
commit a309320ddbac6b1583224fcb6bacd424bcf8637f upstream.
Two return statements in sbi_cpuidle_dt_init_states() did not drop the
OF node reference count. Solve the issue and simplify entire error
handling with scoped/cleanup.h.
Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://patch.msgid.link/20240820094023.61155-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Sep 12 17:57:13 2024 +0800
crypto: caam - Pad SG length when allocating hash edesc
[ Upstream commit 5124bc96162667766f6120b19f57a640c2eccb2a ]
Because hardware will read in multiples of 4 SG entries, ensure
the allocated length is always padded. This was already done
by some callers of ahash_edesc_alloc, but ahash_digest was conspicuously
missing.
In any case, doing it in the allocation function ensures that the
memory is always there.
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Fixes: a5e5c13398f3 ("crypto: caam - fix S/G table passing page boundary")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Amit Shah <amit.shah@amd.com>
Date: Thu Aug 29 12:20:07 2024 +0200
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
[ Upstream commit 3401f63e72596dcb7d912a5b67b4291643cc1034 ]
While sending a command to the PSP, we always requested an interrupt
from the PSP after command completion. This worked for most cases. For
the special case of irqs being disabled -- e.g. when running within
crashdump or kexec contexts, we should not set the SEV_CMDRESP_IOC flag,
so the PSP knows to not attempt interrupt delivery.
Fixes: 8ef979584ea8 ("crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump")
Based-on-patch-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Amit Shah <amit.shah@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pavan Kumar Paluri <papaluri@amd.com>
Date: Thu Aug 15 07:25:00 2024 -0500
crypto: ccp - Properly unregister /dev/sev on sev PLATFORM_STATUS failure
commit ce3d2d6b150ba8528f3218ebf0cee2c2c572662d upstream.
In case of sev PLATFORM_STATUS failure, sev_get_api_version() fails
resulting in sev_data field of psp_master nulled out. This later becomes
a problem when unloading the ccp module because the device has not been
unregistered (via misc_deregister()) before clearing the sev_data field
of psp_master. As a result, on reloading the ccp module, a duplicate
device issue is encountered as can be seen from the dmesg log below.
on reloading ccp module via modprobe ccp
Call Trace:
<TASK>
dump_stack_lvl+0xd7/0xf0
dump_stack+0x10/0x20
sysfs_warn_dup+0x5c/0x70
sysfs_create_dir_ns+0xbc/0xd
kobject_add_internal+0xb1/0x2f0
kobject_add+0x7a/0xe0
? srso_alias_return_thunk+0x5/0xfbef5
? get_device_parent+0xd4/0x1e0
? __pfx_klist_children_get+0x10/0x10
device_add+0x121/0x870
? srso_alias_return_thunk+0x5/0xfbef5
device_create_groups_vargs+0xdc/0x100
device_create_with_groups+0x3f/0x60
misc_register+0x13b/0x1c0
sev_dev_init+0x1d4/0x290 [ccp]
psp_dev_init+0x136/0x300 [ccp]
sp_init+0x6f/0x80 [ccp]
sp_pci_probe+0x2a6/0x310 [ccp]
? srso_alias_return_thunk+0x5/0xfbef5
local_pci_probe+0x4b/0xb0
work_for_cpu_fn+0x1a/0x30
process_one_work+0x203/0x600
worker_thread+0x19e/0x350
? __pfx_worker_thread+0x10/0x10
kthread+0xeb/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
kobject: kobject_add_internal failed for sev with -EEXIST, don't try to register things with the same name in the same directory.
ccp 0000:22:00.1: sev initialization failed
ccp 0000:22:00.1: psp initialization failed
ccp 0000:a2:00.1: no command queues available
ccp 0000:a2:00.1: psp enabled
Address this issue by unregistering the /dev/sev before clearing out
sev_data in case of PLATFORM_STATUS failure.
Fixes: 200664d5237f ("crypto: ccp: Add Secure Encrypted Virtualization (SEV) command support")
Cc: stable@vger.kernel.org
Signed-off-by: Pavan Kumar Paluri <papaluri@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Weili Qian <qianweili@huawei.com>
Date: Sat Aug 31 19:48:30 2024 +0800
crypto: hisilicon/hpre - mask cluster timeout error
[ Upstream commit 145013f723947c83b1a5f76a0cf6e7237d59e973 ]
The timeout threshold of the hpre cluster is 16ms. When the CPU
and device share virtual address, page fault processing time may
exceed the threshold.
In the current test, there is a high probability that the
cluster times out. However, the cluster is waiting for the
completion of memory access, which is not an error, the device
does not need to be reset. If an error occurs in the cluster,
qm also reports the error. Therefore, the cluster timeout
error of hpre can be masked.
Fixes: d90fab0deb8e ("crypto: hisilicon/qm - get error type from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Weili Qian <qianweili@huawei.com>
Date: Sat Aug 31 19:48:31 2024 +0800
crypto: hisilicon/qm - inject error before stopping queue
[ Upstream commit b04f06fc0243600665b3b50253869533b7938468 ]
The master ooo cannot be completely closed when the
accelerator core reports memory error. Therefore, the driver
needs to inject the qm error to close the master ooo. Currently,
the qm error is injected after stopping queue, memory may be
released immediately after stopping queue, causing the device to
access the released memory. Therefore, error is injected to close master
ooo before stopping queue to ensure that the device does not access
the released memory.
Fixes: 6c6dd5802c2d ("crypto: hisilicon/qm - add controller reset interface")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Weili Qian <qianweili@huawei.com>
Date: Sat Aug 31 19:48:29 2024 +0800
crypto: hisilicon/qm - reset device before enabling it
[ Upstream commit 5d2d1ee0874c26b8010ddf7f57e2f246e848af38 ]
Before the device is enabled again, the device may still
store the previously processed data. If an error occurs in
the previous task, the device may fail to be enabled again.
Therefore, before enabling device, reset the device to restore
the initial state.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: b04f06fc0243 ("crypto: hisilicon/qm - inject error before stopping queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Wed Jul 24 11:09:43 2024 -0500
crypto: iaa - Fix potential use after free bug
[ Upstream commit e0d3b845a1b10b7b5abdad7ecc69d45b2aab3209 ]
The free_device_compression_mode(iaa_device, device_mode) function frees
"device_mode" but it iss passed to iaa_compression_modes[i]->free() a few
lines later resulting in a use after free.
The good news is that, so far as I can tell, nothing implements the
->free() function and the use after free happens in dead code. But, with
this fix, when something does implement it, we'll be ready. :)
Fixes: b190447e0fa3 ("crypto: iaa - Add compression mode management along with fixed mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue Sep 10 17:30:24 2024 +0800
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
[ Upstream commit ce212d2afca47acd366a2e74c76fe82c31f785ab ]
Return EINVAL if the snprintf check fails when constructing the
algorithm names.
Fixes: 8c20982caca4 ("crypto: n2 - Silence gcc format-truncation false positive warnings")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202409090726.TP0WfY7p-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Danny Tsen <dtsen@linux.ibm.com>
Date: Thu Sep 19 07:36:37 2024 -0400
crypto: powerpc/p10-aes-gcm - Disable CRYPTO_AES_GCM_P10
[ Upstream commit 44ac4625ea002deecd0c227336c95b724206c698 ]
Data mismatch found when testing ipsec tunnel with AES/GCM crypto.
Disabling CRYPTO_AES_GCM_P10 in Kconfig for this feature.
Fixes: fd0e9b3e2ee6 ("crypto: p10-aes-gcm - An accelerated AES/GCM stitched implementation")
Fixes: cdcecfd9991f ("crypto: p10-aes-gcm - Glue code for AES/GCM stitched implementation")
Fixes: 45a4672b9a6e2 ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Witwicki <michal.witwicki@intel.com>
Date: Wed Jul 17 07:44:57 2024 -0400
crypto: qat - disable IOV in adf_dev_stop()
[ Upstream commit b6c7d36292d50627dbe6a57fa344f87c776971e6 ]
Disabling IOV has the side effect of re-enabling the AEs that might
attempt to do DMAs into the heartbeat buffers.
Move the disable_iov() function in adf_dev_stop() before the AEs are
stopped.
Fixes: ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Witwicki <michal.witwicki@intel.com>
Date: Wed Jul 17 07:44:59 2024 -0400
crypto: qat - ensure correct order in VF restarting handler
[ Upstream commit cd8d2d74292c199b433ef77762bb1d28a4821784 ]
In the process of sending the ADF_PF2VF_MSGTYPE_RESTARTING message to
Virtual Functions (VFs), the Physical Function (PF) should set the
`vf->restarting` flag to true before dispatching the message.
This change is necessary to prevent a race condition where the handling
of the ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE message (which sets the
`vf->restarting` flag to false) runs immediately after the message is sent,
but before the flag is set to true.
Set the `vf->restarting` to true before sending the message
ADF_PF2VF_MSGTYPE_RESTARTING, if supported by the version of the
protocol and if the VF is started.
Fixes: ec26f8e6c784 ("crypto: qat - update PFVF protocol for recovery")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Date: Thu Aug 15 16:47:23 2024 +0100
crypto: qat - fix "Full Going True" macro definition
[ Upstream commit 694a6f594817462942acbb1a35b1f7d61e2d49e7 ]
The macro `ADF_RP_INT_SRC_SEL_F_RISE_MASK` is currently set to the value
`0100b` which means "Empty Going False". This might cause an incorrect
restore of the bank state during live migration.
Fix the definition of the macro to properly represent the "Full Going
True" state which is encoded as `0011b`.
Fixes: bbfdde7d195f ("crypto: qat - add bank save and restore flows")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Reviewed-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Witwicki <michal.witwicki@intel.com>
Date: Wed Jul 17 07:44:58 2024 -0400
crypto: qat - fix recovery flow for VFs
[ Upstream commit 6f1b5236348fced7e7691a933327694b4106bc39 ]
When the PFVF protocol was updated to support version 5, i.e.
ADF_PFVF_COMPAT_FALLBACK, the compatibility version for the VF was
updated without supporting the message RESTARTING_COMPLETE required for
such version.
Add support for the ADF_VF2PF_MSGTYPE_RESTARTING_COMPLETE message in the
VF drivers. This message is sent by the VF driver to the PF to notify
the completion of the shutdown flow.
Fixes: ec26f8e6c784 ("crypto: qat - update PFVF protocol for recovery")
Signed-off-by: Michal Witwicki <michal.witwicki@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Brian Masney <bmasney@redhat.com>
Date: Thu Sep 5 20:25:20 2024 -0400
crypto: qcom-rng - fix support for ACPI-based systems
commit 3e87031a6ce68f13722155497cd511a00b56a2ae upstream.
The qcom-rng driver supports both ACPI and device tree-based systems.
ACPI support was broken when the hw_random interface support was added.
Let's go ahead and fix this by adding the appropriate driver data to the
ACPI match table, and change the of_device_get_match_data() call to
device_get_match_data() so that it will also work on ACPI-based systems.
This fix was boot tested on a Qualcomm Amberwing server (ACPI based) and
on a Qualcomm SA8775p Automotive Development Board (DT based). I also
verified that qcom-rng shows up in /proc/crypto on both systems.
Fixes: f29cd5bb64c2 ("crypto: qcom-rng - Add hw_random interface support")
Reported-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Closes: https://lore.kernel.org/linux-arm-msm/20240828184019.GA21181@eaf/
Cc: stable@vger.kernel.org
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Helge Deller <deller@kernel.org>
Date: Mon Jul 8 14:24:52 2024 +0200
crypto: xor - fix template benchmarking
[ Upstream commit ab9a244c396aae4aaa34b2399b82fc15ec2df8c1 ]
Commit c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking")
switched from using jiffies to ktime-based performance benchmarking.
This works nicely on machines which have a fine-grained ktime()
clocksource as e.g. x86 machines with TSC.
But other machines, e.g. my 4-way HP PARISC server, don't have such
fine-grained clocksources, which is why it seems that 800 xor loops
take zero seconds, which then shows up in the logs as:
xor: measuring software checksum speed
8regs : -1018167296 MB/sec
8regs_prefetch : -1018167296 MB/sec
32regs : -1018167296 MB/sec
32regs_prefetch : -1018167296 MB/sec
Fix this with some small modifications to the existing code to improve
the algorithm to always produce correct results without introducing
major delays for architectures with a fine-grained ktime()
clocksource:
a) Delay start of the timing until ktime() just advanced. On machines
with a fast ktime() this should be just one additional ktime() call.
b) Count the number of loops. Run at minimum 800 loops and finish
earliest when the ktime() counter has progressed.
With that the throughput can now be calculated more accurately under all
conditions.
Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking")
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: John David Anglin <dave.anglin@bell.net>
v2:
- clean up coding style (noticed & suggested by Herbert Xu)
- rephrased & fixed typo in commit message
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yanfei Xu <yanfei.xu@intel.com>
Date: Wed Aug 28 16:42:28 2024 +0800
cxl/pci: Fix to record only non-zero ranges
[ Upstream commit 55e268694e8b07026c88191f9b6949b6887d9ce3 ]
The function cxl_dvsec_rr_decode() retrieves and records DVSEC ranges
into info->dvsec_range[], regardless of whether it is non-zero range,
and the variable info->ranges indicates the number of non-zero ranges.
However, in cxl_hdm_decode_init(), the validation for
info->dvsec_range[] occurs in a for loop that iterates based on
info->ranges. It may result in zero range to be validated but non-zero
range not be validated, in turn, the number of allowed ranges is to be
0. Address it by only record non-zero ranges.
This fix is not urgent as it requires a configuration that zeroes out
the first dvsec range while populating the second. This has not been
observed, but it is theoretically possible. If this gets picked up for
-stable, no harm done, but there is no urgency to backport.
Fixes: 560f78559006 ("cxl/pci: Retrieve CXL DVSEC memory info")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Yanfei Xu <yanfei.xu@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20240828084231.1378789-2-yanfei.xu@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Aurèle La France <tsi@tuyoix.net>
Date: Sat Aug 10 13:25:27 2024 -0600
debugfs show actual source in /proc/mounts
[ Upstream commit 3a987b88a42593875f6345188ca33731c7df728c ]
After its conversion to the new mount API, debugfs displays "none" in
/proc/mounts instead of the actual source. Fix this by recognising its
"source" mount option.
Signed-off-by: Marc Aurèle La France <tsi@tuyoix.net>
Link: https://lore.kernel.org/r/e439fae2-01da-234b-75b9-2a7951671e27@tuyoix.net
Fixes: a20971c18752 ("vfs: Convert debugfs to use the new mount API")
Cc: stable@vger.kernel.org # 6.10.x: 49abee5991e1: debugfs: Convert to new uid/gid option parsing helpers
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Sandeen <sandeen@redhat.com>
Date: Thu Jun 27 19:29:46 2024 -0500
debugfs: Convert to new uid/gid option parsing helpers
[ Upstream commit 49abee5991e18f14ec822ef53acd173ae58ff594 ]
Convert to new uid/gid option parsing helpers
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/b2f44ee0-3cee-49eb-a416-f26a9306eb56@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 3a987b88a425 ("debugfs show actual source in /proc/mounts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhen Lei <thunder.leizhen@huawei.com>
Date: Wed Sep 4 21:39:40 2024 +0800
debugobjects: Fix conditions in fill_pool()
commit 684d28feb8546d1e9597aa363c3bfcf52fe250b7 upstream.
fill_pool() uses 'obj_pool_min_free' to decide whether objects should be
handed back to the kmem cache. But 'obj_pool_min_free' records the lowest
historical value of the number of objects in the object pool and not the
minimum number of objects which should be kept in the pool.
Use 'debug_objects_pool_min_level' instead, which holds the minimum number
which was scaled to the number of CPUs at boot time.
[ tglx: Massage change log ]
Fixes: d26bf5056fc0 ("debugobjects: Reduce number of pool_lock acquisitions in fill_pool()")
Fixes: 36c4ead6f6df ("debugobjects: Add global free list and the counter")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240904133944.2124-3-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Tue Sep 24 15:18:29 2024 +0200
dm-verity: restart or panic on an I/O error
commit e6a3531dd542cb127c8de32ab1e54a48ae19962b upstream.
Maxim Suhanov reported that dm-verity doesn't crash if an I/O error
happens. In theory, this could be used to subvert security, because an
attacker can create sectors that return error with the Write Uncorrectable
command. Some programs may misbehave if they have to deal with EIO.
This commit fixes dm-verity, so that if "panic_on_corruption" or
"restart_on_corruption" was specified and an I/O error happens, the
machine will panic or restart.
This commit also changes kernel_restart to emergency_restart -
kernel_restart calls reboot notifiers and these reboot notifiers may wait
for the bio that failed. emergency_restart doesn't call the notifiers.
Reported-by: Maxim Suhanov <dfirblog@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Fri Sep 27 11:45:45 2024 -0400
Documentation: KVM: fix warning in "make htmldocs"
commit efbc6bd090f48ccf64f7a8dd5daea775821d57ec upstream.
The warning
Documentation/virt/kvm/locking.rst:31: ERROR: Unexpected indentation.
is caused by incorrectly treating a line as the continuation of a paragraph,
rather than as the first line in a bullet list.
Fixed: 44d174596260 ("KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Date: Mon Sep 9 09:37:36 2024 -0400
drbd: Add NULL check for net_conf to prevent dereference in state validation
commit a5e61b50c9f44c5edb6e134ede6fee8806ffafa9 upstream.
If the net_conf pointer is NULL and the code attempts to access its
fields without a check, it will lead to a null pointer dereference.
Add a NULL check before dereferencing the pointer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Cc: stable@vger.kernel.org
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://lore.kernel.org/r/20240909133740.84297-1-m.lobanov@rosalinux.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qiu-ji Chen <chenqiuji666@gmail.com>
Date: Fri Sep 13 16:35:04 2024 +0800
drbd: Fix atomicity violation in drbd_uuid_set_bm()
commit 2f02b5af3a4482b216e6a466edecf6ba8450fa45 upstream.
The violation of atomicity occurs when the drbd_uuid_set_bm function is
executed simultaneously with modifying the value of
device->ldev->md.uuid[UI_BITMAP]. Consider a scenario where, while
device->ldev->md.uuid[UI_BITMAP] passes the validity check when its
value is not zero, the value of device->ldev->md.uuid[UI_BITMAP] is
written to zero. In this case, the check in drbd_uuid_set_bm might refer
to the old value of device->ldev->md.uuid[UI_BITMAP] (before locking),
which allows an invalid value to pass the validity check, resulting in
inconsistency.
To address this issue, it is recommended to include the data validity
check within the locked section of the function. This modification
ensures that the value of device->ldev->md.uuid[UI_BITMAP] does not
change during the validation process, thereby maintaining its integrity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations.
Fixes: 9f2247bb9b75 ("drbd: Protect accesses to the uuid set with a spinlock")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Philipp Reisner <philipp.reisner@linbit.com>
Link: https://lore.kernel.org/r/20240913083504.10549-1-chenqiuji666@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Mon Aug 12 16:06:58 2024 +0800
driver core: Fix a potential null-ptr-deref in module_add_driver()
[ Upstream commit 18ec12c97b39ff6aa15beb8d2b25d15cd44b87d8 ]
Inject fault while probing of-fpga-region, if kasprintf() fails in
module_add_driver(), the second sysfs_remove_link() in exit path will cause
null-ptr-deref as below because kernfs_name_hash() will call strlen() with
NULL driver_name.
Fix it by releasing resources based on the exit path sequence.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[dfffffc000000000] address between user and kernel address ranges
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region]
CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 #295
Hardware name: linux,dummy-virt (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : strlen+0x24/0xb0
lr : kernfs_name_hash+0x1c/0xc4
sp : ffffffc081f97380
x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0
x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000
x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840
x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42
x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d
x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000
x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001
x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000
x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000
Call trace:
strlen+0x24/0xb0
kernfs_name_hash+0x1c/0xc4
kernfs_find_ns+0x118/0x2e8
kernfs_remove_by_name_ns+0x80/0x100
sysfs_remove_link+0x74/0xa8
module_add_driver+0x278/0x394
bus_add_driver+0x1f0/0x43c
driver_register+0xf4/0x3c0
__platform_driver_register+0x60/0x88
of_fpga_region_init+0x20/0x1000 [of_fpga_region]
do_one_initcall+0x110/0x788
do_init_module+0x1dc/0x5c8
load_module+0x3c38/0x4cac
init_module_from_file+0xd4/0x128
idempotent_init_module+0x2cc/0x528
__arm64_sys_finit_module+0xac/0x100
invoke_syscall+0x6c/0x258
el0_svc_common.constprop.0+0x160/0x22c
do_el0_svc+0x44/0x5c
el0_svc+0x48/0xb8
el0t_64_sync_handler+0x13c/0x158
el0t_64_sync+0x190/0x194
Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
Fixes: 85d2b0aa1703 ("module: don't ignore sysfs_create_link() failures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240812080658.2791982-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zijun Hu <quic_zijuhu@quicinc.com>
Date: Mon Jul 22 22:48:10 2024 +0800
driver core: Fix error handling in driver API device_rename()
[ Upstream commit 6d8249ac29bc23260dfa9747eb398ce76012d73c ]
For class-device, device_rename() failure maybe cause unexpected link name
within its class folder as explained below:
/sys/class/.../old_name -> /sys/devices/.../old_name
device_rename(..., new_name) and failed
/sys/class/.../new_name -> /sys/devices/.../old_name
Fixed by undoing renaming link if renaming kobject failed.
Fixes: f349cf34731c ("driver core: Implement ns directory support for device classes.")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240722-device_rename_fix-v2-1-77de1a6c6495@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jing Zhang <renyu.zj@linux.alibaba.com>
Date: Thu Aug 22 11:33:31 2024 +0800
drivers/perf: Fix ali_drw_pmu driver interrupt status clearing
[ Upstream commit a3dd920977dccc453c550260c4b7605b280b79c3 ]
The alibaba_uncore_pmu driver forgot to clear all interrupt status
in the interrupt processing function. After the PMU counter overflow
interrupt occurred, an interrupt storm occurred, causing the system
to hang.
Therefore, clear the correct interrupt status in the interrupt handling
function to fix it.
Fixes: cf7b61073e45 ("drivers/perf: add DDR Sub-System Driveway PMU driver for Yitian 710 SoC")
Signed-off-by: Jing Zhang <renyu.zj@linux.alibaba.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1724297611-20686-1-git-send-email-renyu.zj@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yicong Yang <yangyicong@hisilicon.com>
Date: Thu Aug 29 17:03:31 2024 +0800
drivers/perf: hisi_pcie: Fix TLP headers bandwidth counting
[ Upstream commit 17bf68aeb3642221e3e770399b5a52f370747ac1 ]
We make the initial value of event ctrl register as HISI_PCIE_INIT_SET
and modify according to the user options. This will make TLP headers
bandwidth only counting never take effect since HISI_PCIE_INIT_SET
configures to count the TLP payloads bandwidth. Fix this by making
the initial value of event ctrl register as 0.
Fixes: 17d573984d4d ("drivers/perf: hisi: Add TLP filter support")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-3-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yicong Yang <yangyicong@hisilicon.com>
Date: Thu Aug 29 17:03:30 2024 +0800
drivers/perf: hisi_pcie: Record hardware counts correctly
[ Upstream commit daecd3373a16a039ad241086e30a1ec46fc9d61f ]
Currently we set the period and record it as the initial value of the
counter without checking it's set to the hardware successfully or not.
However the counter maybe unwritable if the target event is unsupported
by the device. In such case we will pass user a wrong count:
[start counts when setting the period]
hwc->prev_count = 0x8000000000000000
device.counter_value = 0 // the counter is not set as the period
[when user reads the counter]
event->count = device.counter_value - hwc->prev_count
= 0x8000000000000000 // wrong. should be 0.
Fix this by record the hardware counter counts correctly when setting
the period.
Fixes: 8404b0fbc7fb ("drivers/perf: hisi: Add driver for HiSilicon PCIe PMU")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240829090332.28756-2-yangyicong@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junlin Li <make24@iscas.ac.cn>
Date: Wed Jul 3 01:50:23 2024 +0800
drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error
[ Upstream commit 46d7ebfe6a75a454a5fa28604f0ef1491f9d8d14 ]
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Fixes: df70ddad81b4 ("[media] rtl2830: implement PID filter")
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junlin Li <make24@iscas.ac.cn>
Date: Tue Jul 2 21:24:13 2024 +0800
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
[ Upstream commit 8ae06f360cfaca2b88b98ca89144548b3186aab1 ]
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
Signed-off-by: Junlin Li <make24@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4b01e01a81b6 ("[media] rtl2832: implement PID filter")
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuesong Li <liyuesong@vivo.com>
Date: Thu Aug 22 17:09:27 2024 +0800
drivers:drm:exynos_drm_gsc:Fix wrong assignment in gsc_bind()
[ Upstream commit 94ebc3d3235c5c516f67315059ce657e5090e94b ]
cocci reported a double assignment problem. Upon reviewing previous
commits, it appears this may actually be an incorrect assignment.
Fixes: 8b9550344d39 ("drm/ipp: clean up debug messages")
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: WangYuli <wangyuli@uniontech.com>
Date: Wed Jul 31 12:10:40 2024 +0800
drm/amd/amdgpu: Properly tune the size of struct
[ Upstream commit 0cee47cde41e22712c034ae961076067d4ac13a0 ]
The struct assertion is failed because sparse cannot parse
`#pragma pack(push, 1)` and `#pragma pack(pop)` correctly.
GCC's output is still 1-byte-aligned. No harm to memory layout.
The error can be filtered out by sparse-diff, but sometimes
multiple lines queezed into one, making the sparse-diff thinks
its a new error. I'm trying to aviod this by fixing errors.
Link: https://lore.kernel.org/all/20230620045919.492128-1-suhui@nfschina.com/
Link: https://lore.kernel.org/all/93d10611-9fbb-4242-87b8-5860b2606042@suswa.mountain/
Fixes: 1721bc1b2afa ("drm/amdgpu: Update VF2PF interface")
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: wenlunpeng <wenlunpeng@uniontech.com>
Reported-by: Su Hui <suhui@nfschina.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Leo Ma <hanghong.ma@amd.com>
Date: Mon Aug 19 13:25:27 2024 -0400
drm/amd/display: Add HDMI DSC native YCbCr422 support
commit 07bfa9cdbf3cd2daadfaaba0601f126f45951ffa upstream.
[WHY && HOW]
For some HDMI OVT timing, YCbCr422 encoding fails at the DSC
bandwidth check. The root cause is our DSC policy for timing
doesn't account for HDMI YCbCr422 native support.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Date: Mon Jul 22 17:18:17 2024 +0530
drm/amd/display: Add null check for set_output_gamma in dcn30_set_output_transfer_func
[ Upstream commit 08ae395ea22fb3d9b318c8bde28c0dfd2f5fa4d2 ]
This commit adds a null check for the set_output_gamma function pointer
in the dcn30_set_output_transfer_func function. Previously,
set_output_gamma was being checked for nullity at line 386, but then it
was being dereferenced without any nullity check at line 401. This
could potentially lead to a null pointer dereference error if
set_output_gamma is indeed null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a nullity check for
set_output_gamma before the call to set_output_gamma at line 401. If
set_output_gamma is null, we log an error message and do not call the
function.
This fix prevents a potential null pointer dereference error.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func()
error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c
373 bool dcn30_set_output_transfer_func(struct dc *dc,
374 struct pipe_ctx *pipe_ctx,
375 const struct dc_stream_state *stream)
376 {
377 int mpcc_id = pipe_ctx->plane_res.hubp->inst;
378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc;
379 const struct pwl_params *params = NULL;
380 bool ret = false;
381
382 /* program OGAM or 3DLUT only for the top pipe*/
383 if (pipe_ctx->top_pipe == NULL) {
384 /*program rmu shaper and 3dlut in MPC*/
385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream);
386 if (ret == false && mpc->funcs->set_output_gamma) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL
387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL)
388 params = &stream->out_transfer_func.pwl;
389 else if (pipe_ctx->stream->out_transfer_func.type ==
390 TF_TYPE_DISTRIBUTED_POINTS &&
391 cm3_helper_translate_curve_to_hw_format(
392 &stream->out_transfer_func,
393 &mpc->blender_params, false))
394 params = &mpc->blender_params;
395 /* there are no ROM LUTs in OUTGAM */
396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED)
397 BREAK_TO_DEBUGGER();
398 }
399 }
400
--> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash
402 return ret;
403 }
Fixes: d99f13878d6f ("drm/amd/display: Add DCN3 HWSEQ")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Date: Tue Aug 27 14:13:10 2024 -0400
drm/amd/display: Block dynamic IPS2 on DCN35 for incompatible FW versions
commit 401c90c4d64f2227fc2f4c02d2ad23296bf5ca6f upstream.
[WHY]
Hangs with Z8 can occur if running an older unfixed PMFW version.
[HOW]
Fallback to RCG only for dynamic IPS2 states if it's not newer than
93.12. Limit to DCN35.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Martin Tsai <martin.tsai@amd.com>
Date: Mon Jul 22 14:12:25 2024 +0800
drm/amd/display: Clean up dsc blocks in accelerated mode
commit 3766a840e093d30e1a2522f650d8a6ac892a8719 upstream.
[WHY]
DSC on eDP could be enabled during VBIOS post. The enabled
DSC may not be disabled when enter to OS, once the system was
in second screen only mode before entering to S4. In this
case, OS will not send setTimings to reset eDP path again.
The enabled DSC HW will make a new stream without DSC cannot
output normally if it reused this pipe with enabled DSC.
[HOW]
In accelerated mode, to clean up DSC blocks if eDP is on link
but not active when we are not in fast boot and seamless boot.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sung Joon Kim <Sungjoon.Kim@amd.com>
Date: Tue Aug 27 14:49:44 2024 -0400
drm/amd/display: Disable SYMCLK32_LE root clock gating
commit ae5100805f98641ea4112241e350485c97936bbe upstream.
[WHY & HOW]
On display on sequence, enabling SYMCLK32_LE root clock gating
causes issue in link training so disabling it is needed.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yihan Zhu <Yihan.Zhu@amd.com>
Date: Mon Aug 26 14:44:04 2024 -0400
drm/amd/display: Enable DML2 override_det_buffer_size_kbytes
commit f57b77d667dc6bd2b114d08d04b03869539209f6 upstream.
[WHY]
Corrupted screen will be observed when 4k144 DP/HDMI display and
4k144 eDP are connected, changing eDP refresh rate from 60Hz to 144Hz.
[HOW]
override_det_buffer_size_kbytes should be true for DCN35/DCN351.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fangzhi Zuo <Jerry.Zuo@amd.com>
Date: Mon Aug 12 12:13:44 2024 -0400
drm/amd/display: Fix Synaptics Cascaded Panamera DSC Determination
commit 4437936c6b696b98f3fe1d8679a2788c41b4df77 upstream.
Synaptics Cascaded Panamera topology needs to unconditionally
acquire root aux for dsc decoding.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Robin Chen <robin.chen@amd.com>
Date: Fri Aug 23 15:00:28 2024 +0800
drm/amd/display: Round calculated vtotal
commit c03fca619fc687338a3b6511fdbed94096abdf79 upstream.
[WHY]
The calculated vtotal may has 1 line deviation. To get precisely
vtotal number, round the vtotal result.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fangzhi Zuo <Jerry.Zuo@amd.com>
Date: Fri Jul 12 16:30:03 2024 -0400
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
commit 8151a6c13111b465dbabe07c19f572f7cbd16fef upstream.
[why]
Encounter NULL pointer dereference uner mst + dsc setup.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? plist_add+0xbe/0x100
? exc_page_fault+0x7c/0x180
? asm_exc_page_fault+0x26/0x30
? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
drm_atomic_check_only+0x5c5/0xa40
drm_mode_atomic_ioctl+0x76e/0xbc0
[how]
dsc recompute should be skipped if no mode change detected on the new
request. If detected, keep checking whether the stream is already on
current state or not.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhikai Zhai <zhikai.zhai@amd.com>
Date: Tue Aug 27 14:06:01 2024 +0800
drm/amd/display: Skip to enable dsc if it has been off
commit 4bdc5b504af7de1f649004cfdd37445d36db6703 upstream.
[WHY]
It makes DSC enable when we commit the stream which need
keep power off, and then it will skip to disable DSC if
pipe reset at this situation as power has been off. It may
cause the DSC unexpected enable on the pipe with the
next new stream which doesn't support DSC.
[HOW]
Check the DSC used on current pipe status when update stream.
Skip to enable if it has been off. The operation enable
DSC should happen when set power on.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Fri Sep 13 13:00:39 2024 -0500
drm/amd/display: Validate backlight caps are sane
commit 327e62f47eb57ae5ff63de82b0815557104e439a upstream.
Currently amdgpu takes backlight caps provided by the ACPI tables
on systems as is. If the firmware sets maximums that are too low
this means that users don't get a good experience.
To avoid having to maintain a quirk list of such systems, do a sanity
check on the values. Check that the spread is at least half of the
values that amdgpu would use if no ACPI table was found and if not
use the amdgpu defaults.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Mon Sep 16 10:52:24 2024 -0400
drm/amdgpu/mes11: reduce timeout
commit 856265caa94a3c78feaa23ec1acd799fe1989201 upstream.
The firmware timeout is 2s. Reduce the driver timeout to
2.1 seconds to avoid back pressure on queue submissions.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3627
Fixes: f7c161a4c250 ("drm/amdgpu: increase mes submission timeout")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Date: Fri Sep 20 18:40:18 2024 +0530
drm/amdgpu/vcn: enable AV1 on both instances
commit 8048e5ade8224969023902b0b3f64470f9c250a7 upstream.
v1 - remove cs parse code (Christian)
On VCN v4_0_6 AV1 is supported on both the instances.
Remove cs IB parse code since explict handling of AV1 schedule is
not required.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lang Yu <lang.yu@amd.com>
Date: Sun Sep 1 08:56:07 2024 -0400
drm/amdgpu: fix invalid fence handling in amdgpu_vm_tlb_flush
[ Upstream commit 4453808d9eab0461dea338e89372ffc4a3c50acc ]
CPU based update doesn't produce a fence, handle such cases properly.
Fixes: d8a3f0a0348d ("drm/amdgpu: implement TLB flush fence")
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Tue Jul 23 13:23:56 2024 -0400
drm/amdgpu: properly handle vbios fake edid sizing
[ Upstream commit 8155566a26b8d6c1dd914f06a0c652e4e2f2adf1 ]
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liu Ying <victor.liu@nxp.com>
Date: Tue Aug 13 17:16:37 2024 +0800
drm/bridge: lontium-lt8912b: Validate mode in drm_bridge_funcs::mode_valid()
[ Upstream commit fe828fbd87786238b30f44cafd698d975d956c97 ]
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid(). So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Date: Tue Aug 27 22:55:19 2024 +0800
drm/mediatek: Fix missing configuration flags in mtk_crtc_ddp_config()
[ Upstream commit fe30bae552ce27b9fefe0b12db1544e73d07325f ]
In mtk_crtc_ddp_config(), mtk_crtc will use some configuration flags to
generate instructions to cmdq_handle, such as:
state->pending_config
mtk_crtc->pending_planes
plane_state->pending.config
mtk_crtc->pending_async_planes
plane_state->pending.async_config
These configuration flags may be set to false when a GCE IRQ comes calling
ddp_cmdq_cb(). This may result in missing prepare instructions,
especially if mtk_crtc_update_config() with the flase need_vblank (no need
to wait for vblank) cases.
Therefore, the mtk_crtc->config_updating flag is set at the beginning of
mtk_crtc_update_config() to ensure that these configuration flags won't be
changed when the mtk_crtc_ddp_config() is preparing instructions.
But somehow the ddp_cmdq_cb() didn't use the mtk_crtc->config_updating
flag to prevent those pending config flags from being cleared.
To avoid missing the configuration when generating the config instruction,
the config_updating flag should be added into ddp_cmdq_cb() and be
protected with spin_lock.
Fixes: 7f82d9c43879 ("drm/mediatek: Clear pending flag when cmdq packet is done")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240827-drm-fixup-0819-v3-1-4761005211ec@mediatek.com/
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240827-drm-fixup-0819-v3-2-4761005211ec@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Fei Shao <fshao@chromium.org>
Date: Wed Aug 28 18:14:47 2024 +0800
drm/mediatek: Use spin_lock_irqsave() for CRTC event lock
[ Upstream commit be03b30b7aa99aca876fbc7c1c1b73b2d0339321 ]
Use the state-aware spin_lock_irqsave() and spin_unlock_irqrestore()
to avoid unconditionally re-enabling the local interrupts.
Fixes: 411f5c1eacfe ("drm/mediatek: handle events when enabling/disabling crtc")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240828101511.3269822-1-fshao@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Lypak <vladimir.lypak@gmail.com>
Date: Sun Sep 1 13:54:00 2024 +0000
drm/msm/a5xx: disable preemption in submits by default
[ Upstream commit db9dec2db76146d65e1cfbb6afb2e2bd5dab67f8 ]
Fine grain preemption (switching from/to points within submits)
requires extra handling in command stream of those submits, especially
when rendering with tiling (using GMEM). However this handling is
missing at this point in mesa (and always was). For this reason we get
random GPU faults and hangs if more than one priority level is used
because local preemption is enabled prior to executing command stream
from submit.
With that said it was ahead of time to enable local preemption by
default considering the fact that even on downstream kernel it is only
enabled if requested via UAPI.
Fixes: a7a4c19c36de ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612041/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Lypak <vladimir.lypak@gmail.com>
Date: Sun Sep 1 13:54:02 2024 +0000
drm/msm/a5xx: fix races in preemption evaluation stage
[ Upstream commit ce050f307ad93bcc5958d0dd35fc276fd394d274 ]
On A5XX GPUs when preemption is used it's invietable to enter a soft
lock-up state in which GPU is stuck at empty ring-buffer doing nothing.
This appears as full UI lockup and not detected as GPU hang (because
it's not). This happens due to not triggering preemption when it was
needed. Sometimes this state can be recovered by some new submit but
generally it won't happen because applications are waiting for old
submits to retire.
One of the reasons why this happens is a race between a5xx_submit and
a5xx_preempt_trigger called from IRQ during submit retire. Former thread
updates ring->cur of previously empty and not current ring right after
latter checks it for emptiness. Then both threads can just exit because
for first one preempt_state wasn't NONE yet and for second one all rings
appeared to be empty.
To prevent such situations from happening we need to establish guarantee
for preempt_trigger to make decision after each submit or retire. To
implement this we serialize preemption initiation using spinlock. If
switch is already in progress we need to re-trigger preemption when it
finishes.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612045/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Lypak <vladimir.lypak@gmail.com>
Date: Sun Sep 1 13:54:01 2024 +0000
drm/msm/a5xx: properly clear preemption records on resume
[ Upstream commit 64fd6d01a52904bdbda0ce810a45a428c995a4ca ]
Two fields of preempt_record which are used by CP aren't reset on
resume: "data" and "info". This is the reason behind faults which happen
when we try to switch to the ring that was active last before suspend.
In addition those faults can't be recovered from because we use suspend
and resume to do so (keeping values of those fields again).
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612043/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Lypak <vladimir.lypak@gmail.com>
Date: Sun Sep 1 13:54:03 2024 +0000
drm/msm/a5xx: workaround early ring-buffer emptiness check
[ Upstream commit a30f9f65b5ac82d4390548c32ed9c7f05de7ddf5 ]
There is another cause for soft lock-up of GPU in empty ring-buffer:
race between GPU executing last commands and CPU checking ring for
emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS
event and RPTR shadow (which is used to check ring emptiness) is updated
a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its
last commands slow enough or we check that ring too fast we will miss a
chance to trigger switch to lower priority ring because current ring isn't
empty just yet. This can escalate to lock-up situation described in
previous patch.
To work-around this issue we keep track of last submit sequence number
for each ring and compare it with one written to memptrs from GPU during
execution of CACHE_FLUSH_TS event.
Fixes: b1fc2839d2f9 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612047/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Abhinav Kumar <quic_abhinavk@quicinc.com>
Date: Tue Jul 30 12:50:11 2024 -0700
drm/msm/dp: enable widebus on all relevant chipsets
[ Upstream commit c7c412202623951dcfc22316f5255fd84fd56186 ]
Hardware document indicates that widebus is recommended on DP on all
MDSS chipsets starting version 5.x.x and above.
Follow the guideline and mark widebus support on all relevant
chipsets for DP.
Fixes: 766f705204a0 ("drm/msm/dp: Remove now unused connector_type from desc")
Fixes: 1b2d98bdd7b7 ("drm/msm/dp: Add DisplayPort controller for SM8650")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 757a2f36ab09 ("drm/msm/dp: enable widebus feature for display port")
Fixes: 1b2d98bdd7b7 ("drm/msm/dp: Add DisplayPort controller for SM8650")
Patchwork: https://patchwork.freedesktop.org/patch/606556/
Link: https://lore.kernel.org/r/20240730195012.2595980-1-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Sun Aug 4 08:40:07 2024 +0300
drm/msm/dsi: correct programming sequence for SM8350 / SM8450
[ Upstream commit 1328cb7c34bf6d056df9ff694ee5194537548258 ]
According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have
different boundaries for pll_clock_inverters programming. Follow the
vendor code and use correct values.
Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/606947/
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Connor Abbott <cwabbott0@gmail.com>
Date: Wed Aug 7 13:34:28 2024 +0100
drm/msm: Dump correct dbgahb clusters on a750
[ Upstream commit d8c17d7aadc2463a395f9340f44c7c34399f1d48 ]
This was missed thanks to the family mixup fixed in the previous commit.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607393/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sherry Yang <sherry.yang@oracle.com>
Date: Tue Aug 27 09:53:37 2024 -0700
drm/msm: fix %s null argument error
[ Upstream commit 25b85075150fe8adddb096db8a4b950353045ee1 ]
The following build error was triggered because of NULL string argument:
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump':
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n",
BUILDSTDERR: | ^~
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
This happens from the commit a61ddb4393ad ("drm: enable (most) W=1
warnings by default across the subsystem"). Using "(null)" instead
to fix it.
Fixes: bc5289eed481 ("drm/msm/mdp5: add debugfs to show smp block status")
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/611071/
Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Connor Abbott <cwabbott0@gmail.com>
Date: Wed Aug 7 13:34:29 2024 +0100
drm/msm: Fix CP_BV_DRAW_STATE_ADDR name
[ Upstream commit a47cfb688d78217983c4a0051449aa88e2ff5ebb ]
This was missed because we weren't using the a750-specific indexed regs.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/607394/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aleksandr Mishin <amishin@t-argos.ru>
Date: Fri Jul 5 12:13:12 2024 +0300
drm/msm: Fix incorrect file name output in adreno_request_fw()
[ Upstream commit e19366911340c2313a1abbb09c54eaf9bdea4f58 ]
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f7d ("drm/msm/adreno: deal with linux-firmware fw paths")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Connor Abbott <cwabbott0@gmail.com>
Date: Wed Aug 7 13:34:27 2024 +0100
drm/msm: Use a7xx family directly in gpu_state
[ Upstream commit db75ef03d72ea75515f5282fe8a4925ae8373fe1 ]
With a7xx, we need to import a new header for each new generation and
switch to a different list of registers, instead of making
backwards-compatible changes. Using the helpers inadvertently made a750
use the a740 list of registers, instead use the family directly to fix
this.
Fixes: f3f8207d8aed ("drm/msm: Add devcoredump support for a750")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607392/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Tue Aug 6 10:19:04 2024 -0700
drm/radeon/evergreen_cs: fix int overflow errors in cs track offsets
[ Upstream commit 3fbaf475a5b8361ebee7da18964db809e37518b7 ]
Several cs track offsets (such as 'track->db_s_read_offset')
either are initialized with or plainly take big enough values that,
once shifted 8 bits left, may be hit with integer overflow if the
resulting values end up going over u32 limit.
Same goes for a few instances of 'surf.layer_size * mslice'
multiplications that are added to 'offset' variable - they may
potentially overflow as well and need to be validated properly.
While some debug prints in this code section take possible overflow
issues into account, simply casting to (unsigned long) may be
erroneous in its own way, as depending on CPU architecture one is
liable to get different results.
Fix said problems by:
- casting 'offset' to fixed u64 data type instead of
ambiguous unsigned long.
- casting one of the operands in vulnerable to integer
overflow cases to u64.
- adjust format specifiers in debug prints to properly
represent 'offset' values.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Deucher <alexander.deucher@amd.com>
Date: Tue Jul 23 13:31:58 2024 -0400
drm/radeon: properly handle vbios fake edid sizing
[ Upstream commit 17c6baff3d5f65c8da164137a58742541a060b2f ]
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: c324acd5032f ("drm/radeon/kms: parse the extended LCD info block")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonas Karlman <jonas@kwiboo.se>
Date: Sat Jun 15 17:03:55 2024 +0000
drm/rockchip: dw_hdmi: Fix reading EDID when using a forced mode
[ Upstream commit a5d024541ec466f428e6c514577d511a40779c7b ]
EDID cannot be read on RK3328 until after read_hpd has been called and
correct io voltage has been configured based on connection status.
When a forced mode is used, e.g. video=1920x1080@60e, the connector
detect ops, that in turn normally calls the read_hpd, never gets called.
This result in reading EDID to fail in connector get_modes ops.
Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to
correct io voltage and allow reading EDID after setup_hpd.
Fixes: 1c53ba8f22a1 ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-5-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alex Bee <knaerzche@gmail.com>
Date: Sat Jun 15 17:03:54 2024 +0000
drm/rockchip: vop: Allow 4096px width scaling
[ Upstream commit 0ef968d91a20b5da581839f093f98f7a03a804f7 ]
There is no reason to limit VOP scaling to 3840px width, the limit of
RK3288, when there are newer VOP versions that support 4096px width.
Change to enforce a maximum of 4096px width plane scaling, the maximum
supported output width of the VOP versions supported by this driver.
Fixes: 4c156c21c794 ("drm/rockchip: vop: support plane scale")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-4-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Sat Jan 6 17:54:32 2024 +0100
drm/stm: Fix an error handling path in stm_drm_platform_probe()
[ Upstream commit ce7c90bfda2656418c69ba0dd8f8a7536b8928d4 ]
If drm_dev_register() fails, a call to drv_load() must be undone, as
already done in the remove function.
Fixes: b759012c5fa7 ("drm/stm: Add STM32 LTDC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20fff7f853f20a48a96db8ff186124470ec4d976.1704560028.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Date: Wed May 31 10:28:54 2023 +0300
drm/stm: ltdc: check memory returned by devm_kzalloc()
[ Upstream commit fd39730c58890cd7f0a594231e19bb357f28877c ]
devm_kzalloc() can fail and return NULL pointer. Check its return status.
Identified with Coccinelle (kmerr.cocci script).
Fixes: 484e72d3146b ("drm/stm: ltdc: add support of ycbcr pixel formats")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230531072854.142629-1-claudiu.beznea@microchip.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Stefan Wahren <wahrenst@gmx.net>
Date: Wed Aug 21 23:40:45 2024 +0200
drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_get
[ Upstream commit f1a54e860b1bc8d824925b5a77f510913880e8d6 ]
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.
This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.
Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821214052.6800-3-wahrenst@gmx.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Tue Aug 6 07:30:16 2024 +0200
dt-bindings: iio: asahi-kasei,ak8975: drop incorrect AK09116 compatible
[ Upstream commit c7668ac67bc21aebdd8e2d7f839bfffba31b7713 ]
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Frank Li <Frank.Li@nxp.com>
Date: Mon Aug 26 17:38:32 2024 -0400
dt-bindings: PCI: layerscape-pci: Replace fsl,lx2160a-pcie with fsl,lx2160ar2-pcie
[ Upstream commit 1a1bf58897d20fc38b454dfecd2771e142d36966 ]
The fsl,lx2160a-pcie compatible is used for mobivel according to the
Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt file.
Whereas the fsl,layerscape-pcie is used for DesignWare PCIe controller binding.
So change it to fsl,lx2160ar2-pcie and allow a fall back to fsl,ls2088a-pcie.
While at it, sort compatible string.
Fixes: 24cd7ecb3886 ("dt-bindings: PCI: layerscape-pci: Convert to YAML format")
Link: https://lore.kernel.org/linux-pci/20240826-2160r2-v1-1-106340d538d6@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haibo Chen <haibo.chen@nxp.com>
Date: Thu Sep 5 17:43:35 2024 +0800
dt-bindings: spi: nxp-fspi: add imx8ulp support
commit 12736adc43b7cd5cb83f274f8f37b0f89d107c97 upstream.
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-2-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Date: Wed Aug 14 14:10:11 2024 +0800
EDAC/igen6: Fix conversion of system address to physical memory address
commit 0ad875f442e95d69a1145a38aabac2fd29984fe3 upstream.
The conversion of system address to physical memory address (as viewed by
the memory controller) by igen6_edac is incorrect when the system address
is above the TOM (Total amount Of populated physical Memory) for Elkhart
Lake and Ice Lake (Neural Network Processor). Fix this conversion.
Fixes: 10590a9d4f23 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/stable/20240814061011.43545-1-qiuxu.zhuo%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Date: Thu Jul 11 15:36:56 2024 +0530
EDAC/synopsys: Fix error injection on Zynq UltraScale+
[ Upstream commit 35e6dbfe1846caeafabb49b7575adb36b0aa2269 ]
The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB.
The DDR host interface has a contiguous memory so while injecting
errors, the driver should remove the hole else the injection fails as
the address translation is incorrect.
Introduce a get_mem_info() function pointer and set it for Zynq
UltraScale+ platform to return host address.
Fixes: 1a81361f75d8 ("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Thu Sep 12 17:45:49 2024 +0200
efistub/tpm: Use ACPI reclaim memory for event log to avoid corruption
commit 77d48d39e99170b528e4f2e9fc5d1d64cdedd386 upstream.
The TPM event log table is a Linux specific construct, where the data
produced by the GetEventLog() boot service is cached in memory, and
passed on to the OS using an EFI configuration table.
The use of EFI_LOADER_DATA here results in the region being left
unreserved in the E820 memory map constructed by the EFI stub, and this
is the memory description that is passed on to the incoming kernel by
kexec, which is therefore unaware that the region should be reserved.
Even though the utility of the TPM2 event log after a kexec is
questionable, any corruption might send the parsing code off into the
weeds and crash the kernel. So let's use EFI_ACPI_RECLAIM_MEMORY
instead, which is always treated as reserved by the E820 conversion
logic.
Cc: <stable@vger.kernel.org>
Reported-by: Breno Leitao <leitao@debian.org>
Tested-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Carpenter <alexander.sverdlin@gmail.com>
Date: Wed Sep 11 10:39:15 2024 +0300
ep93xx: clock: Fix off by one in ep93xx_div_recalc_rate()
[ Upstream commit c7f06284a6427475e3df742215535ec3f6cd9662 ]
The psc->div[] array has psc->num_div elements. These values come from
when we call clk_hw_register_div(). It's adc_divisors and
ARRAY_SIZE(adc_divisors)) and so on. So this condition needs to be >=
instead of > to prevent an out of bounds read.
Fixes: 9645ccc7bd7a ("ep93xx: clock: convert in-place to COMMON_CLK")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/1caf01ad4c0a8069535813c26c7f0b8ea011155e.camel@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gao Xiang <xiang@kernel.org>
Date: Mon Sep 9 11:19:11 2024 +0800
erofs: fix incorrect symlink detection in fast symlink
[ Upstream commit 9ed50b8231e37b1ae863f5dec8153b98d9f389b4 ]
Fast symlink can be used if the on-disk symlink data is stored
in the same block as the on-disk inode, so we don’t need to trigger
another I/O for symlink data. However, currently fs correction could be
reported _incorrectly_ if inode xattrs are too large.
In fact, these should be valid images although they cannot be handled as
fast symlinks.
Many thanks to Colin for reporting this!
Reported-by: Colin Walters <walters@verbum.org>
Reported-by: https://honggfuzz.dev/
Link: https://lore.kernel.org/r/bb2dd430-7de0-47da-ae5b-82ab2dd4d945@app.fastmail.com
Fixes: 431339ba9042 ("staging: erofs: add inode operations")
[ Note that it's a runtime misbehavior instead of a security issue. ]
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240909031911.1174718-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gao Xiang <xiang@kernel.org>
Date: Tue Sep 10 15:08:47 2024 +0800
erofs: handle overlapped pclusters out of crafted images properly
[ Upstream commit 9e2f9d34dd12e6e5b244ec488bcebd0c2d566c50 ]
syzbot reported a task hang issue due to a deadlock case where it is
waiting for the folio lock of a cached folio that will be used for
cache I/Os.
After looking into the crafted fuzzed image, I found it's formed with
several overlapped big pclusters as below:
Ext: logical offset | length : physical offset | length
0: 0.. 16384 | 16384 : 151552.. 167936 | 16384
1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384
2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384
...
Here, extent 0/1 are physically overlapped although it's entirely
_impossible_ for normal filesystem images generated by mkfs.
First, managed folios containing compressed data will be marked as
up-to-date and then unlocked immediately (unlike in-place folios) when
compressed I/Os are complete. If physical blocks are not submitted in
the incremental order, there should be separate BIOs to avoid dependency
issues. However, the current code mis-arranges z_erofs_fill_bio_vec()
and BIO submission which causes unexpected BIO waits.
Second, managed folios will be connected to their own pclusters for
efficient inter-queries. However, this is somewhat hard to implement
easily if overlapped big pclusters exist. Again, these only appear in
fuzzed images so let's simply fall back to temporary short-lived pages
for correctness.
Additionally, it justifies that referenced managed folios cannot be
truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy
up `struct z_erofs_bvec`") for simplicity although it shouldn't be any
difference.
Reported-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Reported-by: syzbot+de04e06b28cfecf2281c@syzkaller.appspotmail.com
Reported-by: syzbot+c8c8238b394be4a1087d@syzkaller.appspotmail.com
Tested-by: syzbot+4fc98ed414ae63d1ada2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000002fda01061e334873@google.com
Fixes: 8e6c8fa9f2e9 ("erofs: enable big pcluster feature")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240910070847.3356592-1-hsiangkao@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gao Xiang <xiang@kernel.org>
Date: Wed Jul 3 20:00:51 2024 +0800
erofs: tidy up `struct z_erofs_bvec`
[ Upstream commit 2080ca1ed3e43233c4e8480c0b9d2840886de01e ]
After revisiting the design, I believe `struct z_erofs_bvec` should
be page-based instead of folio-based due to the reasons below:
- The minimized memory mapping block is a page;
- Under the certain circumstances, only temporary pages needs to be
used instead of folios since refcount, mapcount for such pages are
unnecessary;
- Decompressors handle all types of pages including temporary pages,
not only folios.
When handling `struct z_erofs_bvec`, all folio-related information
is now accessed using the page_folio() helper.
The final goal of this round adaptation is to eliminate direct
accesses to `struct page` in the EROFS codebase, except for some
exceptions like `z_erofs_is_shortlived_page()` and
`z_erofs_page_is_invalidated()`, which require a new helper to
determine the memdesc type of an arbitrary page.
Actually large folios of compressed files seem to work now, yet I tend
to conduct more tests before officially enabling this for all scenarios.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240703120051.3653452-4-hsiangkao@linux.alibaba.com
Stable-dep-of: 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Karsten <mkarsten@uwaterloo.ca>
Date: Tue Aug 6 12:33:01 2024 +0000
eventpoll: Annotate data-race of busy_poll_usecs
commit b9ca079dd6b09e08863aa998edf5c47597806c05 upstream.
A struct eventpoll's busy_poll_usecs field can be modified via a user
ioctl at any time. All reads of this field should be annotated with
READ_ONCE.
Fixes: 85455c795c07 ("eventpoll: support busy poll per epoll instance")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://lore.kernel.org/r/20240806123301.167557-1-jdamato@fastly.com
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Daniel Yang <danielyangkang@gmail.com>
Date: Mon Sep 16 16:05:06 2024 -0700
exfat: resolve memory leak from exfat_create_upcase_table()
commit c290fe508eee36df1640c3cb35dc8f89e073c8a8 upstream.
If exfat_load_upcase_table reaches end and returns -EINVAL,
allocated memory doesn't get freed and while
exfat_load_default_upcase_table allocates more memory, leading to a
memory leak.
Here's link to syzkaller crash report illustrating this issue:
https://syzkaller.appspot.com/text?tag=CrashReport&x=1406c201980000
Reported-by: syzbot+e1c69cadec0f1a078e3d@syzkaller.appspotmail.com
Fixes: a13d1a4de3b0 ("exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kemeng Shi <shikemeng@huaweicloud.com>
Date: Tue Aug 20 21:22:28 2024 +0800
ext4: avoid buffer_head leak in ext4_mark_inode_used()
[ Upstream commit 5e5b2a56c57def1b41efd49596621504d7bcc61c ]
Release inode_bitmap_bh from ext4_read_inode_bitmap() in
ext4_mark_inode_used() to avoid buffer_head leak.
By the way, remove unneeded goto for invalid ino when inode_bitmap_bh
is NULL.
Fixes: 8016e29f4362 ("ext4: fast commit recovery path")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kemeng Shi <shikemeng@huaweicloud.com>
Date: Tue Aug 20 21:22:30 2024 +0800
ext4: avoid negative min_clusters in find_group_orlov()
[ Upstream commit bb0a12c3439b10d88412fd3102df5b9a6e3cd6dc ]
min_clusters is signed integer and will be converted to unsigned
integer when compared with unsigned number stats.free_clusters.
If min_clusters is negative, it will be converted to a huge unsigned
value in which case all groups may not meet the actual desired free
clusters.
Set negative min_clusters to 0 to avoid unexpected behavior.
Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Date: Wed Aug 21 12:23:24 2024 -0300
ext4: avoid OOB when system.data xattr changes underneath the filesystem
[ Upstream commit c6b72f5d82b1017bad80f9ebf502832fc321d796 ]
When looking up for an entry in an inlined directory, if e_value_offs is
changed underneath the filesystem by some change in the block device, it
will lead to an out-of-bounds access that KASAN detects as an UAF.
EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
loop0: detected capacity change from 2048 to 2047
==================================================================
BUG: KASAN: use-after-free in ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
Read of size 1 at addr ffff88803e91130f by task syz-executor269/5103
CPU: 0 UID: 0 PID: 5103 Comm: syz-executor269 Not tainted 6.11.0-rc4-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:93 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
ext4_search_dir+0xf2/0x1c0 fs/ext4/namei.c:1500
ext4_find_inline_entry+0x4be/0x5e0 fs/ext4/inline.c:1697
__ext4_find_entry+0x2b4/0x1b30 fs/ext4/namei.c:1573
ext4_lookup_entry fs/ext4/namei.c:1727 [inline]
ext4_lookup+0x15f/0x750 fs/ext4/namei.c:1795
lookup_one_qstr_excl+0x11f/0x260 fs/namei.c:1633
filename_create+0x297/0x540 fs/namei.c:3980
do_symlinkat+0xf9/0x3a0 fs/namei.c:4587
__do_sys_symlinkat fs/namei.c:4610 [inline]
__se_sys_symlinkat fs/namei.c:4607 [inline]
__x64_sys_symlinkat+0x95/0xb0 fs/namei.c:4607
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f3e73ced469
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff4d40c258 EFLAGS: 00000246 ORIG_RAX: 000000000000010a
RAX: ffffffffffffffda RBX: 0032656c69662f2e RCX: 00007f3e73ced469
RDX: 0000000020000200 RSI: 00000000ffffff9c RDI: 00000000200001c0
RBP: 0000000000000000 R08: 00007fff4d40c290 R09: 00007fff4d40c290
R10: 0023706f6f6c2f76 R11: 0000000000000246 R12: 00007fff4d40c27c
R13: 0000000000000003 R14: 431bde82d7b634db R15: 00007fff4d40c2b0
</TASK>
Calling ext4_xattr_ibody_find right after reading the inode with
ext4_get_inode_loc will lead to a check of the validity of the xattrs,
avoiding this problem.
Reported-by: syzbot+0c2508114d912a54ee79@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c2508114d912a54ee79
Fixes: e8e948e7802a ("ext4: let ext4_find_entry handle inline data")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-5-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kemeng Shi <shikemeng@huaweicloud.com>
Date: Tue Aug 20 21:22:29 2024 +0800
ext4: avoid potential buffer_head leak in __ext4_new_inode()
[ Upstream commit 227d31b9214d1b9513383cf6c7180628d4b3b61f ]
If a group is marked EXT4_GROUP_INFO_IBITMAP_CORRUPT after it's inode
bitmap buffer_head was successfully verified, then __ext4_new_inode()
will get a valid inode_bitmap_bh of a corrupted group from
ext4_read_inode_bitmap() in which case inode_bitmap_bh misses a release.
Hnadle "IS_ERR(inode_bitmap_bh)" and group corruption separately like
how ext4_free_inode() does to avoid buffer_head leak.
Fixes: 9008a58e5dce ("ext4: make the bitmap read routines return real error codes")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240820132234.2759926-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Date: Fri Aug 30 12:50:57 2024 +0530
ext4: check stripe size compatibility on remount as well
[ Upstream commit ee85e0938aa8f9846d21e4d302c3cf6a2a75110d ]
We disable stripe size in __ext4_fill_super if it is not a multiple of
the cluster ratio however this check is missed when trying to remount.
This can leave us with cases where stripe < cluster_ratio after
remount:set making EXT4_B2C(sbi->s_stripe) become 0 that can cause some
unforeseen bugs like divide by 0.
Fix that by adding the check in remount path as well.
Reported-by: syzbot+1ad8bac5af24d01e2cbd@syzkaller.appspotmail.com
Tested-by: syzbot+1ad8bac5af24d01e2cbd@syzkaller.appspotmail.com
Reviewed-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Fixes: c3defd99d58c ("ext4: treat stripe in block unit")
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/3a493bb503c3598e25dcfbed2936bb2dff3fece7.1725002410.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: yangerkun <yangerkun@huawei.com>
Date: Sat Aug 17 16:55:10 2024 +0800
ext4: clear EXT4_GROUP_INFO_WAS_TRIMMED_BIT even mount with discard
[ Upstream commit 20cee68f5b44fdc2942d20f3172a262ec247b117 ]
Commit 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in
ext4_group_info") speed up fstrim by skipping trim trimmed group. We
also has the chance to clear trimmed once there exists some block free
for this group(mount without discard), and the next trim for this group
will work well too.
For mount with discard, we will issue dicard when we free blocks, so
leave trimmed flag keep alive to skip useless trim trigger from
userspace seems reasonable. But for some case like ext4 build on
dm-thinpool(ext4 blocksize 4K, pool blocksize 128K), discard from ext4
maybe unaligned for dm thinpool, and thinpool will just finish this
discard(see process_discard_bio when begein equals to end) without
actually process discard. For this case, trim from userspace can really
help us to free some thinpool block.
So convert to clear trimmed flag for all case no matter mounted with
discard or not.
Fixes: 3d56b8d2c74c ("ext4: Speed up FITRIM by recording flags in ext4_group_info")
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240817085510.2084444-1-yangerkun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Date: Wed Aug 21 12:23:22 2024 -0300
ext4: return error on ext4_find_inline_entry
[ Upstream commit 4d231b91a944f3cab355fce65af5871fb5d7735b ]
In case of errors when reading an inode from disk or traversing inline
directory entries, return an error-encoded ERR_PTR instead of returning
NULL. ext4_find_inline_entry only caller, __ext4_find_entry already returns
such encoded errors.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20240821152324.3621860-3-cascardo@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: c6b72f5d82b1 ("ext4: avoid OOB when system.data xattr changes underneath the filesystem")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Tue Jun 25 11:13:48 2024 +0800
f2fs: atomic: fix to avoid racing w/ GC
[ Upstream commit 1a0bd289a5db1df8df8fab949633a0b8d3f235ee ]
Case #1:
SQLite App GC Thread Kworker Shrinker
- f2fs_ioc_start_atomic_write
- f2fs_ioc_commit_atomic_write
- f2fs_commit_atomic_write
- filemap_write_and_wait_range
: write atomic_file's data to cow_inode
echo 3 > drop_caches
to drop atomic_file's
cache.
- f2fs_gc
- gc_data_segment
- move_data_page
- set_page_dirty
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data
to cow_inode
- f2fs_down_write(&fi->i_gc_rwsem[WRITE])
- __f2fs_commit_atomic_write
- f2fs_up_write(&fi->i_gc_rwsem[WRITE])
Case #2:
SQLite App GC Thread Kworker
- f2fs_ioc_start_atomic_write
- __writeback_single_inode
- do_writepages
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
: write atomic_file's data to cow_inode
- f2fs_gc
- gc_data_segment
- move_data_page
- set_page_dirty
- writepages
- f2fs_do_write_data_page
: overwrite atomic_file's data to cow_inode
- f2fs_ioc_commit_atomic_write
In above cases racing in between atomic_write and GC, previous
data in atomic_file may be overwrited to cow_file, result in
data corruption.
This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private,
and use it to indicate that there is last dirty data in atomic file,
and the data should be writebacked into cow_file, if the flag is not
tagged in page, we should never write data across files.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Aug 7 18:24:35 2024 +0800
f2fs: atomic: fix to truncate pagecache before on-disk metadata truncation
[ Upstream commit ebd3309aec6271c4616573b0cb83ea25e623070a ]
We should always truncate pagecache while truncating on-disk data.
Fixes: a46bebd502fe ("f2fs: synchronize atomic write aborts")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Wed Jul 24 10:51:58 2024 -0700
f2fs: avoid potential int overflow in sanity_check_area_boundary()
commit 50438dbc483ca6a133d2bce9d5d6747bcee38371 upstream.
While calculating the end addresses of main area and segment 0, u32
may be not enough to hold the result without the danger of int
overflow.
Just in case, play it safe and cast one of the operands to a
wider type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: fd694733d523 ("f2fs: cover large section in sanity check of super")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Date: Fri Aug 16 13:07:03 2024 +0900
f2fs: check discard support for conventional zones
commit 43aec4d01bd2ce961817a777b3846f8318f398e4 upstream.
As the helper function f2fs_bdev_support_discard() shows, f2fs checks if
the target block devices support discard by calling
bdev_max_discard_sectors() and bdev_is_zoned(). This check works well
for most cases, but it does not work for conventional zones on zoned
block devices. F2fs assumes that zoned block devices support discard,
and calls __submit_discard_cmd(). When __submit_discard_cmd() is called
for sequential write required zones, it works fine since
__submit_discard_cmd() issues zone reset commands instead of discard
commands. However, when __submit_discard_cmd() is called for
conventional zones, __blkdev_issue_discard() is called even when the
devices do not support discard.
The inappropriate __blkdev_issue_discard() call was not a problem before
the commit 30f1e7241422 ("block: move discard checks into the ioctl
handler") because __blkdev_issue_discard() checked if the target devices
support discard or not. If not, it returned EOPNOTSUPP. After the
commit, __blkdev_issue_discard() no longer checks it. It always returns
zero and sets NULL to the given bio pointer. This NULL pointer triggers
f2fs_bug_on() in __submit_discard_cmd(). The BUG is recreated with the
commands below at the umount step, where /dev/nullb0 is a zoned null_blk
with 5GB total size, 128MB zone size and 10 conventional zones.
$ mkfs.f2fs -f -m /dev/nullb0
$ mount /dev/nullb0 /mnt
$ for ((i=0;i<5;i++)); do dd if=/dev/zero of=/mnt/test bs=65536 count=1600 conv=fsync; done
$ umount /mnt
To fix the BUG, avoid the inappropriate __blkdev_issue_discard() call.
When discard is requested for conventional zones, check if the device
supports discard or not. If not, return EOPNOTSUPP.
Fixes: 30f1e7241422 ("block: move discard checks into the ioctl handler")
Cc: stable@vger.kernel.org
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yeongjin Gil <youngjin.gil@samsung.com>
Date: Mon Aug 19 17:34:30 2024 +0900
f2fs: compress: don't redirty sparse cluster during {,de}compress
[ Upstream commit f785cec298c95d00058560c0715233294a04b8f3 ]
In f2fs_do_write_data_page, when the data block is NULL_ADDR, it skips
writepage considering that it has been already truncated.
This results in an infinite loop as the PAGECACHE_TAG_TOWRITE tag is not
cleared during the writeback process for a compressed file including
NULL_ADDR in compress_mode=user.
This is the reproduction process:
1. dd if=/dev/zero bs=4096 count=1024 seek=1024 of=testfile
2. f2fs_io compress testfile
3. dd if=/dev/zero bs=4096 count=1 conv=notrunc of=testfile
4. f2fs_io decompress testfile
To prevent the problem, let's check whether the cluster is fully
allocated before redirty its pages.
Fixes: 5fdb322ff2c2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Tested-by: Jaewook Kim <jw5454.kim@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yeongjin Gil <youngjin.gil@samsung.com>
Date: Tue Aug 13 16:32:44 2024 +0900
f2fs: Create COW inode from parent dentry for atomic write
[ Upstream commit 8c1b787938fd86bab27a1492fa887408c75fec2b ]
The i_pino in f2fs_inode_info has the previous parent's i_ino when inode
was renamed, which may cause f2fs_ioc_start_atomic_write to fail.
If file_wrong_pino is true and i_nlink is 1, then to find a valid pino,
we should refer to the dentry from inode.
To resolve this issue, let's get parent inode using parent dentry
directly.
Fixes: 3db1de0e582c ("f2fs: change the current atomic write way")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Wed Jul 24 10:28:38 2024 -0700
f2fs: fix several potential integer overflows in file offsets
commit 1cade98cf6415897bf9342ee451cc5b40b58c638 upstream.
When dealing with large extents and calculating file offsets by
summing up according extent offsets and lengths of unsigned int type,
one may encounter possible integer overflow if the values are
big enough.
Prevent this from happening by expanding one of the addends to
(pgoff_t) type.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: d323d005ac4a ("f2fs: support file defragment")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chao Yu <chao@kernel.org>
Date: Thu Jun 27 15:15:21 2024 +0800
f2fs: fix to avoid racing in between read and OPU dio write
[ Upstream commit 0cac51185e65dc2a20686184e02f3cafc99eb202 ]
If lfs mode is on, buffered read may race w/ OPU dio write as below,
it may cause buffered read hits unwritten data unexpectly, and for
dio read, the race condition exists as well.
Thread A Thread B
- f2fs_file_write_iter
- f2fs_dio_write_iter
- __iomap_dio_rw
- f2fs_iomap_begin
- f2fs_map_blocks
- __allocate_data_block
- allocated blkaddr #x
- iomap_dio_submit_bio
- f2fs_file_read_iter
- filemap_read
- f2fs_read_data_folio
- f2fs_mpage_readpages
- f2fs_map_blocks
: get blkaddr #x
- f2fs_submit_read_bio
IRQ
- f2fs_read_end_io
: read IO on blkaddr #x complete
IRQ
- iomap_dio_bio_end_io
: direct write IO on blkaddr #x complete
In LFS mode, if there is inflight dio, let's wait for its completion,
this policy won't cover all race cases, however it is a tradeoff which
avoids abusing lock around IO paths.
Fixes: f847c699cff3 ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Tue Jul 30 09:08:55 2024 +0800
f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()
[ Upstream commit c7f114d864ac91515bb07ac271e9824a20f5ed95 ]
syzbot reports a f2fs bug as below:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_report+0xe8/0x550 mm/kasan/report.c:491
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
instrument_atomic_read_write include/linux/instrumented.h:96 [inline]
atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline]
__refcount_add include/linux/refcount.h:184 [inline]
__refcount_inc include/linux/refcount.h:241 [inline]
refcount_inc include/linux/refcount.h:258 [inline]
get_task_struct include/linux/sched/task.h:118 [inline]
kthread_stop+0xca/0x630 kernel/kthread.c:704
f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210
f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283
f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline]
__f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The root cause is below race condition, it may cause use-after-free
issue in sbi->gc_th pointer.
- remount
- f2fs_remount
- f2fs_stop_gc_thread
- kfree(gc_th)
- f2fs_ioc_shutdown
- f2fs_do_shutdown
- f2fs_stop_gc_thread
- kthread_stop(gc_th->f2fs_gc_task)
: sbi->gc_thread = NULL;
We will call f2fs_do_shutdown() in two paths:
- for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore
for fixing.
- for f2fs_shutdown() path, it's safe since caller has already grabbed
sb->s_umount semaphore.
Reported-by: syzbot+1a8e2b31f2ac9bd3d148@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-f2fs-devel/0000000000005c7ccb061e032b9b@google.com
Fixes: 7950e9ac638e ("f2fs: stop gc/discard thread after fs shutdown")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Sep 4 11:20:47 2024 +0800
f2fs: fix to check atomic_file in f2fs ioctl interfaces
commit bfe5c02654261bfb8bd9cb174a67f3279ea99e58 upstream.
Some f2fs ioctl interfaces like f2fs_ioc_set_pin_file(),
f2fs_move_file_range(), and f2fs_defragment_range() missed to
check atomic_write status, which may cause potential race issue,
fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chao Yu <chao@kernel.org>
Date: Tue Sep 10 11:07:13 2024 +0800
f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
[ Upstream commit 930c6ab93492c4b15436524e704950b364b2930c ]
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 58 at kernel/rcu/sync.c:177 rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
CPU: 1 UID: 0 PID: 58 Comm: kworker/1:2 Not tainted 6.10.0-syzkaller-12562-g1722389b0d86 #0
Workqueue: events destroy_super_work
RIP: 0010:rcu_sync_dtor+0xcd/0x180 kernel/rcu/sync.c:177
Call Trace:
percpu_free_rwsem+0x41/0x80 kernel/locking/percpu-rwsem.c:42
destroy_super_work+0xec/0x130 fs/super.c:282
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312
worker_thread+0x86d/0xd40 kernel/workqueue.c:3390
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
As Christian Brauner pointed out [1]: the root cause is f2fs sets
SB_RDONLY flag in internal function, rather than setting the flag
covered w/ sb->s_umount semaphore via remount procedure, then below
race condition causes this bug:
- freeze_super()
- sb_wait_write(sb, SB_FREEZE_WRITE)
- sb_wait_write(sb, SB_FREEZE_PAGEFAULT)
- sb_wait_write(sb, SB_FREEZE_FS)
- f2fs_handle_critical_error
- sb->s_flags |= SB_RDONLY
- thaw_super
- thaw_super_locked
- sb_rdonly() is true, so it skips
sb_freeze_unlock(sb, SB_FREEZE_FS)
- deactivate_locked_super
Since f2fs has almost the same logic as ext4 [2] when handling critical
error in filesystem if it mounts w/ errors=remount-ro option:
- set CP_ERROR_FLAG flag which indicates filesystem is stopped
- record errors to superblock
- set SB_RDONLY falg
Once we set CP_ERROR_FLAG flag, all writable interfaces can detect the
flag and stop any further updates on filesystem. So, it is safe to not
set SB_RDONLY flag, let's remove the logic and keep in line w/ ext4 [3].
[1] https://lore.kernel.org/all/20240729-himbeeren-funknetz-96e62f9c7aee@brauner
[2] https://lore.kernel.org/all/20240729132721.hxih6ehigadqf7wx@quack3
[3] https://lore.kernel.org/linux-ext4/20240805201241.27286-1-jack@suse.cz
Fixes: b62e71be2110 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Reported-by: syzbot+20d7e439f76bbbd863a7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000b90a8e061e21d12f@google.com/
Cc: Jan Kara <jack@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Mon Aug 12 22:12:42 2024 +0800
f2fs: fix to wait page writeback before setting gcing flag
[ Upstream commit a4d7f2b3238fd5f76b9e6434a0bd5d2e29049cff ]
Soft IRQ Thread
- f2fs_write_end_io
- f2fs_defragment_range
- set_page_private_gcing
- type = WB_DATA_TYPE(page, false);
: assign type w/ F2FS_WB_CP_DATA
due to page_private_gcing() is true
- dec_page_count() w/ wrong type
- end_page_writeback()
Value of F2FS_WB_CP_DATA reference count may become negative under above
race condition, the root cause is we missed to wait page writeback before
setting gcing page private flag, let's fix it.
Fixes: 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment")
Fixes: 4961acdd65c9 ("f2fs: fix to tag gcing flag on page during block migration")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chao Yu <chao@kernel.org>
Date: Fri Sep 6 14:27:24 2024 +0800
f2fs: get rid of online repaire on corrupted directory
[ Upstream commit 884ee6dc85b959bc152f15bca80c30f06069e6c4 ]
syzbot reports a f2fs bug as below:
kernel BUG at fs/f2fs/inode.c:896!
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Call Trace:
evict+0x532/0x950 fs/inode.c:704
dispose_list fs/inode.c:747 [inline]
evict_inodes+0x5f9/0x690 fs/inode.c:797
generic_shutdown_super+0x9d/0x2d0 fs/super.c:627
kill_block_super+0x44/0x90 fs/super.c:1696
kill_f2fs_super+0x344/0x690 fs/f2fs/super.c:4898
deactivate_locked_super+0xc4/0x130 fs/super.c:473
cleanup_mnt+0x41f/0x4b0 fs/namespace.c:1373
task_work_run+0x24f/0x310 kernel/task_work.c:228
ptrace_notify+0x2d2/0x380 kernel/signal.c:2402
ptrace_report_syscall include/linux/ptrace.h:415 [inline]
ptrace_report_syscall_exit include/linux/ptrace.h:477 [inline]
syscall_exit_work+0xc6/0x190 kernel/entry/common.c:173
syscall_exit_to_user_mode_prepare kernel/entry/common.c:200 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:205 [inline]
syscall_exit_to_user_mode+0x279/0x370 kernel/entry/common.c:218
do_syscall_64+0x100/0x230 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_evict_inode+0x1598/0x15c0 fs/f2fs/inode.c:896
Online repaire on corrupted directory in f2fs_lookup() can generate
dirty data/meta while racing w/ readonly remount, it may leave dirty
inode after filesystem becomes readonly, however, checkpoint() will
skips flushing dirty inode in a state of readonly mode, result in
above panic.
Let's get rid of online repaire in f2fs_lookup(), and leave the work
to fsck.f2fs.
Fixes: 510022a85839 ("f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries")
Reported-by: syzbot+ebea2790904673d7c618@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000a7b20f061ff2d56a@google.com
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daeho Jeong <daehojeong@google.com>
Date: Wed Sep 4 08:33:06 2024 -0700
f2fs: prevent atomic file from being dirtied before commit
[ Upstream commit fccaa81de87e80b1809906f7e438e5766fbdc172 ]
Keep atomic file clean while updating and make it dirtied during commit
in order to avoid unnecessary and excessive inode updates in the previous
fix.
Fixes: 4bf78322346f ("f2fs: mark inode dirty for FI_ATOMIC_COMMITTED flag")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Date: Wed Jul 24 10:05:44 2024 -0700
f2fs: prevent possible int overflow in dir_block_index()
commit 47f268f33dff4a5e31541a990dc09f116f80e61c upstream.
The result of multiplication between values derived from functions
dir_buckets() and bucket_blocks() *could* technically reach
2^30 * 2^2 = 2^32.
While unlikely to happen, it is prudent to ensure that it will not
lead to integer overflow. Thus, use mul_u32_u32() as it's more
appropriate to mitigate the issue.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 3843154598a0 ("f2fs: introduce large directory support")
Cc: stable@vger.kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chao Yu <chao@kernel.org>
Date: Wed Jun 26 09:47:27 2024 +0800
f2fs: reduce expensive checkpoint trigger frequency
[ Upstream commit aaf8c0b9ae042494cb4585883b15c1332de77840 ]
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7afa7 ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7afa7 ("f2fs: fix lost xattrs of directories")
Reported-by: wangzijie <wangzijie1@honor.com>
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reported-by: Yunlei He <heyunlei@hihonor.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jann Horn <jannh@google.com>
Date: Tue Aug 6 16:07:16 2024 +0200
f2fs: Require FMODE_WRITE for atomic write ioctls
commit 4f5a100f87f32cb65d4bb1ad282a08c92f6f591e upstream.
The F2FS ioctls for starting and committing atomic writes check for
inode_owner_or_capable(), but this does not give LSMs like SELinux or
Landlock an opportunity to deny the write access - if the caller's FSUID
matches the inode's UID, inode_owner_or_capable() immediately returns true.
There are scenarios where LSMs want to deny a process the ability to write
particular files, even files that the FSUID of the process owns; but this
can currently partially be bypassed using atomic write ioctls in two ways:
- F2FS_IOC_START_ATOMIC_REPLACE + F2FS_IOC_COMMIT_ATOMIC_WRITE can
truncate an inode to size 0
- F2FS_IOC_START_ATOMIC_WRITE + F2FS_IOC_ABORT_ATOMIC_WRITE can revert
changes another process concurrently made to a file
Fix it by requiring FMODE_WRITE for these operations, just like for
F2FS_IOC_MOVE_RANGE. Since any legitimate caller should only be using these
ioctls when intending to write into the file, that seems unlikely to break
anything.
Fixes: 88b88a667971 ("f2fs: support atomic writes")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Thu Aug 1 22:34:39 2024 +0200
fbdev: hpfb: Fix an error handling path in hpfb_dio_probe()
[ Upstream commit aa578e897520f32ae12bec487f2474357d01ca9c ]
If an error occurs after request_mem_region(), a corresponding
release_mem_region() should be called, as already done in the remove
function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Andryuk <jason.andryuk@amd.com>
Date: Mon Sep 9 22:09:16 2024 -0400
fbdev: xen-fbfront: Assign fb_info->device
commit c2af2a45560bd4046c2e109152acde029ed0acc2 upstream.
Probing xen-fbfront faults in video_is_primary_device(). The passed-in
struct device is NULL since xen-fbfront doesn't assign it and the
memory is kzalloc()-ed. Assign fb_info->device to avoid this.
This was exposed by the conversion of fb_is_primary_device() to
video_is_primary_device() which dropped a NULL check for struct device.
Fixes: f178e96de7f0 ("arch: Remove struct fb_info from video helpers")
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Closes: https://lore.kernel.org/xen-devel/CALUcmUncX=LkXWeiSiTKsDY-cOe8QksWhFvcCneOKfrKd0ZajA@mail.gmail.com/
Tested-by: Arthur Borsboom <arthurborsboom@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Date: Sat Aug 10 16:04:03 2024 +0900
firewire: core: correct range of block for case of switch statement
[ Upstream commit ebb9d3ca8f7efc1b6a2f1750d1058eda444883d0 ]
A commit d8527cab6c31 ("firewire: cdev: implement new event to notify
response subaction with time stamp") adds an additional case,
FW_CDEV_EVENT_RESPONSE2, into switch statement in complete_transaction().
However, the range of block is beyond to the case label and reaches
neibour default label.
This commit corrects the range of block. Fortunately, it has few impacts
in practice since the local variable in the scope under the label is not
used in codes under default label.
Fixes: d8527cab6c31 ("firewire: cdev: implement new event to notify response subaction with time stamp")
Link: https://lore.kernel.org/r/20240810070403.36801-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cristian Marussi <cristian.marussi@arm.com>
Date: Mon Aug 12 18:33:32 2024 +0100
firmware: arm_scmi: Fix double free in OPTEE transport
[ Upstream commit e98dba934b2fc587eafb83f47ad64d9053b18ae0 ]
Channels can be shared between protocols, avoid freeing the same channel
descriptors twice when unloading the stack.
Fixes: 5f90f189a052 ("firmware: arm_scmi: Add optee transport")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Peng Fan <peng.fan@nxp.com> #i.MX95 19x19 EVK
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Message-Id: <20240812173340.3912830-2-cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mukesh Ojha <quic_mojha@quicinc.com>
Date: Mon Jul 8 21:23:32 2024 +0530
firmware: qcom: scm: Disable SDI and write no dump to dump mode
[ Upstream commit 79cb2cb8d89b7eca87e8dac031dadea4aeafeaa7 ]
SDI is enabled for most of the Qualcomm SoCs and as per commit
ff4aa3bc9825 ("firmware: qcom_scm: disable SDI if required")
it was recommended to disable SDI by mentioning it in device tree
to avoid hang during watchdog or during reboot.
However, for some cases if download mode tcsr register already
configured from boot firmware to collect dumps and if SDI is
disabled via means of mentioning it in device tree we could
still end up with dump collection. Disabling SDI alone is
not completely enough to disable dump mode and we also need to
zero out the bits download bits from tcsr register.
Current commit now, unconditionally call qcom_scm_set_download_mode()
based on download_mode flag, at max if TCSR register is not mentioned
or available for a SoC it will fallback to legacy way of setting
download mode through command which may be no-ops or return error
in case current firmware does not implements QCOM_SCM_INFO_IS_CALL_AVAIL
so, at worst it does nothing if it fails.
It also does to call SDI disable call if dload mode is disabled, which
looks fine to do as intention is to disable dump collection even if
system crashes.
Fixes: ff4aa3bc9825 ("firmware: qcom_scm: disable SDI if required")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/20240708155332.4056479-1-quic_mojha@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jann Horn <jannh@google.com>
Date: Wed Aug 28 01:45:48 2024 +0200
firmware_loader: Block path traversal
commit f0e5311aa8022107d63c54e2f03684ec097d1394 upstream.
Most firmware names are hardcoded strings, or are constructed from fairly
constrained format strings where the dynamic parts are just some hex
numbers or such.
However, there are a couple codepaths in the kernel where firmware file
names contain string components that are passed through from a device or
semi-privileged userspace; the ones I could find (not counting interfaces
that require root privileges) are:
- lpfc_sli4_request_firmware_update() seems to construct the firmware
filename from "ModelName", a string that was previously parsed out of
some descriptor ("Vital Product Data") in lpfc_fill_vpd()
- nfp_net_fw_find() seems to construct a firmware filename from a model
name coming from nfp_hwinfo_lookup(pf->hwinfo, "nffw.partno"), which I
think parses some descriptor that was read from the device.
(But this case likely isn't exploitable because the format string looks
like "netronome/nic_%s", and there shouldn't be any *folders* starting
with "netronome/nic_". The previous case was different because there,
the "%s" is *at the start* of the format string.)
- module_flash_fw_schedule() is reachable from the
ETHTOOL_MSG_MODULE_FW_FLASH_ACT netlink command, which is marked as
GENL_UNS_ADMIN_PERM (meaning CAP_NET_ADMIN inside a user namespace is
enough to pass the privilege check), and takes a userspace-provided
firmware name.
(But I think to reach this case, you need to have CAP_NET_ADMIN over a
network namespace that a special kind of ethernet device is mapped into,
so I think this is not a viable attack path in practice.)
Fix it by rejecting any firmware names containing ".." path components.
For what it's worth, I went looking and haven't found any USB device
drivers that use the firmware loader dangerously.
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Fixes: abb139e75c2c ("firmware: teach the kernel to load firmware files directly from the filesystem")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20240828-firmware-traversal-v3-1-c76529c63b5f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mickaël Salaün <mic@digikod.net>
Date: Wed Aug 21 11:56:05 2024 +0200
fs: Fix file_set_fowner LSM hook inconsistencies
commit 26f204380a3c182e5adf1a798db0724d6111b597 upstream.
The fcntl's F_SETOWN command sets the process that handle SIGIO/SIGURG
for the related file descriptor. Before this change, the
file_set_fowner LSM hook was always called, ignoring the VFS logic which
may not actually change the process that handles SIGIO (e.g. TUN, TTY,
dnotify), nor update the related UID/EUID.
Moreover, because security_file_set_fowner() was called without lock
(e.g. f_owner.lock), concurrent F_SETOWN commands could result to a race
condition and inconsistent LSM states (e.g. SELinux's fown_sid) compared
to struct fown_struct's UID/EUID.
This change makes sure the LSM states are always in sync with the VFS
state by moving the security_file_set_fowner() call close to the
UID/EUID updates and using the same f_owner.lock .
Rename f_modown() to __f_setown() to simplify code.
Cc: stable@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jann Horn <jannh@google.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Sandeen <sandeen@redhat.com>
Date: Thu Jun 27 19:26:24 2024 -0500
fs_parse: add uid & gid option option parsing helpers
[ Upstream commit 9f111059e725f7ca79a136bfc734da3c8c1838b4 ]
Multiple filesystems take uid and gid as options, and the code to
create the ID from an integer and validate it is standard boilerplate
that can be moved into common helper functions, so do that for
consistency and less cut&paste.
This also helps avoid the buggy pattern noted by Seth Jenkins at
https://lore.kernel.org/lkml/CALxfFW4BXhEwxR0Q5LSkg-8Vb4r2MONKCcUCVioehXQKr35eHg@mail.gmail.com/
because uid/gid parsing will fail before any assignment in most
filesystems.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Link: https://lore.kernel.org/r/de859d0a-feb9-473d-a5e2-c195a3d47abb@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 3a987b88a425 ("debugfs show actual source in /proc/mounts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: yangyun <yangyun50@huawei.com>
Date: Sat Sep 14 16:51:31 2024 +0800
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
commit 2f3d8ff457982f4055fe8f7bf19d3821ba22c376 upstream.
This may be a typo. The comment has said shared locks are
not allowed when this bit is set. If using shared lock, the
wait in `fuse_file_cached_io_open` may be forever.
Fixes: 205c1d802683 ("fuse: allow parallel dio writes with FUSE_DIRECT_IO_ALLOW_MMAP")
CC: stable@vger.kernel.org # v6.9
Signed-off-by: yangyun <yangyun50@huawei.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Gerecke <jason.gerecke@wacom.com>
Date: Mon Sep 9 13:32:08 2024 -0700
HID: wacom: Do not warn about dropped packets for first packet
[ Upstream commit 84aecf2d251a3359bc78b7c8e58f54b9fc966e89 ]
The driver currently assumes that the first sequence number it will see
is going to be 0. This is not a realiable assumption and can break if,
for example, the tablet has already been running for some time prior to
the kernel driver connecting to the device. This commit initializes the
expected sequence number to -1 and will only print the "Dropped" warning
the it has been updated to a non-negative value.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38e5 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gerecke <jason.gerecke@wacom.com>
Date: Mon Sep 9 13:32:07 2024 -0700
HID: wacom: Support sequence numbers smaller than 16-bit
[ Upstream commit 359673ea3a203611b4f6d0f28922a4b9d2cfbcc8 ]
The current dropped packet reporting assumes that all sequence numbers
are 16 bits in length. This results in misleading "Dropped" messages if
the hardware uses fewer bits. For example, if a tablet uses only 8 bits
to store its sequence number, once it rolls over from 255 -> 0, the
driver will still be expecting a packet "256". This patch adjusts the
logic to reset the next expected packet to logical_minimum whenever
it overflows beyond logical_maximum.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38e5 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guenter Roeck <linux@roeck-us.net>
Date: Sun Jul 21 06:41:17 2024 -0700
hwmon: (max16065) Fix alarm attributes
[ Upstream commit 119abf7d1815f098f7f91ae7abc84324a19943d7 ]
Chips reporting overcurrent alarms report it in the second alarm register.
That means the second alarm register has to be read, even if the chip only
supports 8 or fewer ADC channels.
MAX16067 and MAX16068 report undervoltage and overvoltage alarms in
separate registers. Fold register contents together to report both with
the existing alarm attribute. This requires actually storing the chip type
in struct max16065_data. Rename the variable 'chip' to match the variable
name used in the probe function.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guenter Roeck <linux@roeck-us.net>
Date: Thu Jul 18 09:52:01 2024 -0700
hwmon: (max16065) Fix overflows seen when writing limits
[ Upstream commit 744ec4477b11c42e2c8de9eb8364675ae7a0bd81 ]
Writing large limits resulted in overflows as reported by module tests.
in0_lcrit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_crit: Suspected overflow: [max=5538, read 0, written 2147483647]
in0_min: Suspected overflow: [max=5538, read 0, written 2147483647]
Fix the problem by clamping prior to multiplications and the use of
DIV_ROUND_CLOSEST, and by using consistent variable types.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes: f5bae2642e3d ("hwmon: Driver for MAX16065 System Manager and compatibles")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Davis <afd@ti.com>
Date: Wed Apr 3 15:36:21 2024 -0500
hwmon: (max16065) Remove use of i2c_match_id()
[ Upstream commit 5a71654b398e3471f0169c266a3587cf09e1200c ]
The function i2c_match_id() is used to fetch the matching ID from
the i2c_device_id table. This is often used to then retrieve the
matching driver_data. This can be done in one step with the helper
i2c_get_match_data().
This helper has a couple other benefits:
* It doesn't need the i2c_device_id passed in so we do not need
to have that forward declared, allowing us to remove those or
move the i2c_device_id table down to its more natural spot
with the other module info.
* It also checks for device match data, which allows for OF and
ACPI based probing. That means we do not have to manually check
those first and can remove those checks.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240403203633.914389-20-afd@ti.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Stable-dep-of: 119abf7d1815 ("hwmon: (max16065) Fix alarm attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yuntao Liu <liuyuntao12@huawei.com>
Date: Thu Aug 15 08:30:21 2024 +0000
hwmon: (ntc_thermistor) fix module autoloading
[ Upstream commit b6964d66a07a9003868e428a956949e17ab44d7e ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Fixes: 9e8269de100d ("hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Message-ID: <20240815083021.756134-1-liuyuntao12@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Gaosheng Cui <cuigaosheng1@huawei.com>
Date: Sat Aug 3 14:49:22 2024 +0800
hwrng: bcm2835 - Add missing clk_disable_unprepare in bcm2835_rng_init
commit d57e2f7cffd57fe2800332dec768ec1b67a4159f upstream.
Add the missing clk_disable_unprepare() before return in
bcm2835_rng_init().
Fixes: e5f9f41d5e62 ("hwrng: bcm2835 - add reset support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Gaosheng Cui <cuigaosheng1@huawei.com>
Date: Sat Aug 3 14:49:23 2024 +0800
hwrng: cctrng - Add missing clk_disable_unprepare in cctrng_resume
commit 4b7acc85de14ee8a2236f54445dc635d47eceac0 upstream.
Add the missing clk_disable_unprepare() before return in
cctrng_resume().
Fixes: a583ed310bb6 ("hwrng: cctrng - introduce Arm CryptoCell driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guoqing Jiang <guoqing.jiang@canonical.com>
Date: Mon Aug 26 15:04:15 2024 +0800
hwrng: mtk - Use devm_pm_runtime_enable
commit 78cb66caa6ab5385ac2090f1aae5f3c19e08f522 upstream.
Replace pm_runtime_enable with the devres-enabled version which
can trigger pm_runtime_disable.
Otherwise, the below appears during reload driver.
mtk_rng 1020f000.rng: Unbalanced pm_runtime_enable!
Fixes: 81d2b34508c6 ("hwrng: mtk - add runtime PM support")
Cc: <stable@vger.kernel.org>
Suggested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tommy Huang <tommy_huang@aspeedtech.com>
Date: Wed Sep 11 17:39:51 2024 +0800
i2c: aspeed: Update the stop sw state when the bus recovery occurs
commit 93701d3b84ac5f3ea07259d4ced405c53d757985 upstream.
When the i2c bus recovery occurs, driver will send i2c stop command
in the scl low condition. In this case the sw state will still keep
original situation. Under multi-master usage, i2c bus recovery will
be called when i2c transfer timeout occurs. Update the stop command
calling with aspeed_i2c_do_stop function to update master_state.
Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed Sep 11 18:39:14 2024 +0300
i2c: isch: Add missed 'else'
commit 1db4da55070d6a2754efeb3743f5312fc32f5961 upstream.
In accordance with the existing comment and code analysis
it is quite likely that there is a missed 'else' when adapter
times out. Add it.
Fixes: 5bc1200852c3 ("i2c: Add Intel SCH SMBus support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.27+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Patrisious Haddad <phaddad@nvidia.com>
Date: Mon Sep 2 13:36:33 2024 +0300
IB/core: Fix ib_cache_setup_one error flow cleanup
[ Upstream commit 1403c8b14765eab805377dd3b75e96ace8747aed ]
When ib_cache_update return an error, we exit ib_cache_setup_one
instantly with no proper cleanup, even though before this we had
already successfully done gid_table_setup_one, that results in
the kernel WARN below.
Do proper cleanup using gid_table_cleanup_one before returning
the err in order to fix the issue.
WARNING: CPU: 4 PID: 922 at drivers/infiniband/core/cache.c:806 gid_table_release_one+0x181/0x1a0
Modules linked in:
CPU: 4 UID: 0 PID: 922 Comm: c_repro Not tainted 6.11.0-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:gid_table_release_one+0x181/0x1a0
Code: 44 8b 38 75 0c e8 2f cb 34 ff 4d 8b b5 28 05 00 00 e8 23 cb 34 ff 44 89 f9 89 da 4c 89 f6 48 c7 c7 d0 58 14 83 e8 4f de 21 ff <0f> 0b 4c 8b 75 30 e9 54 ff ff ff 48 8 3 c4 10 5b 5d 41 5c 41 5d 41
RSP: 0018:ffffc90002b835b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c8527
RDX: 0000000000000000 RSI: ffffffff811c8534 RDI: 0000000000000001
RBP: ffff8881011b3d00 R08: ffff88810b3abe00 R09: 205d303839303631
R10: 666572207972746e R11: 72746e6520444947 R12: 0000000000000001
R13: ffff888106390000 R14: ffff8881011f2110 R15: 0000000000000001
FS: 00007fecc3b70800(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000340 CR3: 000000010435a001 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x94/0xa0
? __warn+0x9e/0x1c0
? gid_table_release_one+0x181/0x1a0
? report_bug+0x1f9/0x340
? gid_table_release_one+0x181/0x1a0
? handle_bug+0xa2/0x110
? exc_invalid_op+0x31/0xa0
? asm_exc_invalid_op+0x16/0x20
? __warn_printk+0xc7/0x180
? __warn_printk+0xd4/0x180
? gid_table_release_one+0x181/0x1a0
ib_device_release+0x71/0xe0
? __pfx_ib_device_release+0x10/0x10
device_release+0x44/0xd0
kobject_put+0x135/0x3d0
put_device+0x20/0x30
rxe_net_add+0x7d/0xa0
rxe_newlink+0xd7/0x190
nldev_newlink+0x1b0/0x2a0
? __pfx_nldev_newlink+0x10/0x10
rdma_nl_rcv_msg+0x1ad/0x2e0
rdma_nl_rcv_skb.constprop.0+0x176/0x210
netlink_unicast+0x2de/0x400
netlink_sendmsg+0x306/0x660
__sock_sendmsg+0x110/0x120
____sys_sendmsg+0x30e/0x390
___sys_sendmsg+0x9b/0xf0
? kstrtouint+0x6e/0xa0
? kstrtouint_from_user+0x7c/0xb0
? get_pid_task+0xb0/0xd0
? proc_fail_nth_write+0x5b/0x140
? __fget_light+0x9a/0x200
? preempt_count_add+0x47/0xa0
__sys_sendmsg+0x61/0xd0
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 1901b91f9982 ("IB/core: Fix potential NULL pointer dereference in pkey cache")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/79137687d829899b0b1c9835fcb4b258004c439a.1725273354.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Aug 29 14:46:39 2024 +0000
icmp: change the order of rate limits
commit 8c2bd38b95f75f3d2a08c93e35303e26d480d24e upstream.
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Kubiak <michal.kubiak@intel.com>
Date: Wed Sep 4 17:47:47 2024 +0200
idpf: fix netdev Tx queue stop/wake
[ Upstream commit e4b398dd82f5d5867bc5f442c43abc8fba30ed2c ]
netif_txq_maybe_stop() returns -1, 0, or 1, while
idpf_tx_maybe_stop_common() says it returns 0 or -EBUSY. As a result,
there sometimes are Tx queue timeout warnings despite that the queue
is empty or there is at least enough space to restart it.
Make idpf_tx_maybe_stop_common() inline and returning true or false,
handling the return of netif_txq_maybe_stop() properly. Use a correct
goto in idpf_tx_maybe_stop_splitq() to avoid stopping the queue or
incrementing the stops counter twice.
Fixes: 6818c4d5b3c2 ("idpf: add splitq start_xmit")
Fixes: a5ab9ee0df0b ("idpf: add singleq start_xmit and napi poll")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Lobakin <aleksander.lobakin@intel.com>
Date: Thu Jun 20 15:53:41 2024 +0200
idpf: merge singleq and splitq &net_device_ops
[ Upstream commit 14f662b43bf8c765114f73d184af2702b2280436 ]
It makes no sense to have a second &net_device_ops struct (800 bytes of
rodata) with only one difference in .ndo_start_xmit, which can easily
be just one `if`. This `if` is a drop in the ocean and you won't see
any difference.
Define unified idpf_xmit_start(). The preparation for sending is the
same, just call either idpf_tx_splitq_frame() or idpf_tx_singleq_frame()
depending on the active model to actually map and send the skb.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e4b398dd82f5 ("idpf: fix netdev Tx queue stop/wake")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Lobakin <aleksander.lobakin@intel.com>
Date: Thu Jun 20 15:53:38 2024 +0200
idpf: split &idpf_queue into 4 strictly-typed queue structures
[ Upstream commit e4891e4687c8dd136d80d6c1b857a02931ed6fc8 ]
Currently, sizeof(struct idpf_queue) is 32 Kb.
This is due to the 12-bit hashtable declaration at the end of the queue.
This HT is needed only for Tx queues when the flow scheduling mode is
enabled. But &idpf_queue is unified for all of the queue types,
provoking excessive memory usage.
The unified structure in general makes the code less effective via
suboptimal fields placement. You can't avoid that unless you make unions
each 2 fields. Even then, different field alignment etc., doesn't allow
you to optimize things to the limit.
Split &idpf_queue into 4 structures corresponding to the queue types:
RQ (Rx queue), SQ (Tx queue), FQ (buffer queue), and CQ (completion
queue). Place only needed fields there and shortcuts handy for hotpath.
Allocate the abovementioned hashtable dynamically and only when needed,
keeping &idpf_tx_queue relatively short (192 bytes, same as Rx). This HT
is used only for OOO completions, which aren't really hotpath anyway.
Note that this change must be done atomically, otherwise it's really
easy to get lost and miss something.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e4b398dd82f5 ("idpf: fix netdev Tx queue stop/wake")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Lobakin <aleksander.lobakin@intel.com>
Date: Thu Jun 20 15:53:37 2024 +0200
idpf: stop using macros for accessing queue descriptors
[ Upstream commit 66c27e3b19d5aae58d7f0145113de61d6fba5e09 ]
In C, we have structures and unions.
Casting `void *` via macros is not only error-prone, but also looks
confusing and awful in general.
In preparation for splitting the queue structs, replace it with a
union and direct array dereferences.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e4b398dd82f5 ("idpf: fix netdev Tx queue stop/wake")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guillaume Stols <gstols@baylibre.com>
Date: Tue Jul 2 17:34:10 2024 +0000
iio: adc: ad7606: fix oversampling gpio array
[ Upstream commit 8dc4594b54dbaaba40dc8884ad3d42083de39434 ]
gpiod_set_array_value was misused here: the implementation relied on the
assumption that an unsigned long was required for each gpio, while the
function expects a bit array stored in "as much unsigned long as needed
for storing one bit per GPIO", i.e it is using a bit field.
This leaded to incorrect parameter passed to gpiod_set_array_value, that
would set 1 value instead of 3.
It also prevents to select the software mode correctly for the AD7606B.
Fixes: d2a415c86c6b ("iio: adc: ad7606: Add support for AD7606B ADC")
Fixes: 41f71e5e7daf ("staging: iio: adc: ad7606: Use find_closest() macro")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guillaume Stols <gstols@baylibre.com>
Date: Tue Jul 2 17:34:11 2024 +0000
iio: adc: ad7606: fix standby gpio state to match the documentation
[ Upstream commit 059fe4f8bbdf5cad212e1aeeb3e8968c80b9ff3b ]
The binding's documentation specifies that "As the line is active low, it
should be marked GPIO_ACTIVE_LOW". However, in the driver, it was handled
the opposite way. This commit sets the driver's behaviour in sync with the
documentation
Fixes: 722407a4e8c0 ("staging:iio:ad7606: Use GPIO descriptor API")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasileios Amoiridis <vassilisamir@gmail.com>
Date: Mon Jun 10 01:38:12 2024 +0200
iio: chemical: bme680: Fix read/write ops to device by adding mutexes
[ Upstream commit 77641e5a477d428335cd094b88ac54e09ccb70f4 ]
Add mutexes in the {read/write}_raw() functions of the device to guard the
read/write of data from/to the device. This is necessary because for any
operation other than temperature, multiple reads need to take place from
the device. Even though regmap has a locking by itself, it won't protect us
from multiple applications trying to read at the same time temperature and
pressure since the pressure reading includes an internal temperature
reading and there is nothing to ensure that this temperature+pressure
reading will happen sequentially without any other operation interfering
in the meantime.
Fixes: 1b3bd8592780 ("iio: chemical: Add support for Bosch BME680 sensor")
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20240609233826.330516-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Tue Aug 6 07:30:15 2024 +0200
iio: magnetometer: ak8975: drop incorrect AK09116 compatible
[ Upstream commit da6e3160df230692bbd48a6d52318035f19595e2 ]
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97fa0 ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806053016.6401-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nuno Sa <nuno.sa@analog.com>
Date: Fri Sep 20 09:22:52 2024 +0200
Input: adp5588-keys - fix check on return code
commit eb017f4ea13b1a5ad7f4332279f2e4c67b44bdea upstream.
During adp5588_setup(), we read all the events to clear the event FIFO.
However, adp5588_read() just calls i2c_smbus_read_byte_data() which
returns the byte read in case everything goes well. Hence, we need to
explicitly check for a negative error code instead of checking for
something different than 0.
Fixes: e960309ce318 ("Input: adp5588-keys - bail out on returned error")
Cc: stable@vger.kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240920-fix-adp5588-err-check-v1-1-81f6e957ef24@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Werner Sembach <wse@tuxedocomputers.com>
Date: Tue Sep 10 11:40:07 2024 +0200
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
commit 01eed86d50af9fab27d876fd677b86259ebe9de3 upstream.
There might be devices out in the wild where the board name is GMxXGxx
instead of GMxXGxX.
Adding both to be on the safe side.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-2-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Werner Sembach <wse@tuxedocomputers.com>
Date: Tue Sep 10 11:40:08 2024 +0200
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
commit 3870e2850b56306d1d1e435c5a1ccbccd7c59291 upstream.
The Gen6 devices have the same problem and the same Solution as the Gen5
ones.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240910094008.1601230-3-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Werner Sembach <wse@tuxedocomputers.com>
Date: Thu Sep 5 18:48:51 2024 +0200
Input: i8042 - add TUXEDO Stellaris 16 Gen5 AMD to i8042 quirk table
commit e06edf96dea065dd1d9df695bf8b92784992333e upstream.
Some TongFang barebones have touchpad and/or keyboard issues after
suspend, fixable with nomux + reset + noloop + nopnp. Luckily, none of
them have an external PS/2 port so this can safely be set for all of
them.
I'm not entirely sure if every device listed really needs all four quirks,
but after testing and production use, no negative effects could be
observed when setting all four.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240905164851.771578-1-wse@tuxedocomputers.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Date: Mon Aug 5 10:55:11 2024 +0200
Input: ilitek_ts_i2c - add report id message validation
[ Upstream commit 208989744a6f01bed86968473312d4e650e600b3 ]
Ensure that the touchscreen response has correct "report id" byte
before processing the touch data and discard other messages.
Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-3-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Date: Mon Aug 5 10:55:10 2024 +0200
Input: ilitek_ts_i2c - avoid wrong input subsystem sync
[ Upstream commit 7d0b18cd5dc7429917812963611d961fd93cb44d ]
For different reasons i2c transaction may fail or report id in the
message may be wrong. Avoid closing the frame in this case as it will
result in all contacts being dropped, indicating that nothing is
touching the screen anymore, while usually it is not the case.
Fixes: 42370681bd46 ("Input: Add support for ILITEK Lego Series")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240805085511.43955-2-francesco@dolcini.it
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Tue Jul 16 14:48:23 2024 -0700
interconnect: icc-clk: Add missed num_nodes initialization
[ Upstream commit c801ed86840ec38b2a9bcafeee3d7c9e14c743f3 ]
With the new __counted_by annotation, the "num_nodes" struct member must
be set before accessing the "nodes" array. This initialization was done
in other places where a new struct icc_onecell_data is allocated, but this
case in icc_clk_register() was missed. Set "num_nodes" after allocation.
Fixes: dd4904f3b924 ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716214819.work.328-kees@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Sun Aug 4 08:40:12 2024 +0300
interconnect: qcom: sm8250: Enable sync_state
[ Upstream commit d3681b30214eb5885092ce4586f07237dc3c522f ]
Enable the generic icc sync_state callback to ensure interconnect votes
are actually taken into account, instead of being forced to the maximum
value.
Fixes: b95b668eaaa2 ("interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240804-sm8350-fixes-v1-8-1149dd8399fe@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Felix Moessbauer <felix.moessbauer@siemens.com>
Date: Tue Sep 10 19:11:56 2024 +0200
io_uring/io-wq: do not allow pinning outside of cpuset
[ Upstream commit 0997aa5497c714edbb349ca366d28bd550ba3408 ]
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When changing the affinity of the io_wq thread via syscall, we must only
allow cpumasks within the limits defined by the cpuset controller of the
cgroup (if enabled).
Fixes: da64d6db3bd3 ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-2-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Felix Moessbauer <felix.moessbauer@siemens.com>
Date: Tue Sep 10 19:11:57 2024 +0200
io_uring/io-wq: inherit cpuset of cgroup in io worker
[ Upstream commit 84eacf177faa605853c58e5b1c0d9544b88c16fd ]
The io worker threads are userland threads that just never exit to the
userland. By that, they are also assigned to a cgroup (the group of the
creating task).
When creating a new io worker, this worker should inherit the cpuset
of the cgroup.
Fixes: da64d6db3bd3 ("io_uring: One wqe per wq")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240910171157.166423-3-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Tue Sep 10 08:30:57 2024 -0600
io_uring/rw: treat -EOPNOTSUPP for IOCB_NOWAIT like -EAGAIN
commit c0a9d496e0fece67db777bd48550376cf2960c47 upstream.
Some file systems, ocfs2 in this case, will return -EOPNOTSUPP for
an IOCB_NOWAIT read/write attempt. While this can be argued to be
correct, the usual return value for something that requires blocking
issue is -EAGAIN.
A refactoring io_uring commit dropped calling kiocb_done() for
negative return values, which is otherwise where we already do that
transformation. To ensure we catch it in both spots, check it in
__io_read() itself as well.
Reported-by: Robert Sander <r.sander@heinlein-support.de>
Link: https://fosstodon.org/@gurubert@mastodon.gurubert.de/113112431889638440
Cc: stable@vger.kernel.org
Fixes: a08d195b586a ("io_uring/rw: split io_read() into a helper")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Felix Moessbauer <felix.moessbauer@siemens.com>
Date: Mon Sep 9 17:00:36 2024 +0200
io_uring/sqpoll: do not allow pinning outside of cpuset
commit f011c9cf04c06f16b24f583d313d3c012e589e50 upstream.
The submit queue polling threads are userland threads that just never
exit to the userland. When creating the thread with IORING_SETUP_SQ_AFF,
the affinity of the poller thread is set to the cpu specified in
sq_thread_cpu. However, this CPU can be outside of the cpuset defined
by the cgroup cpuset controller. This violates the rules defined by the
cpuset controller and is a potential issue for realtime applications.
In b7ed6d8ffd6 we fixed the default affinity of the poller thread, in
case no explicit pinning is required by inheriting the one of the
creating task. In case of explicit pinning, the check is more
complicated, as also a cpu outside of the parent cpumask is allowed.
We implemented this by using cpuset_cpus_allowed (that has support for
cgroup cpusets) and testing if the requested cpu is in the set.
Fixes: 37d1e2e3642e ("io_uring: move SQPOLL thread io-wq forked worker")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240909150036.55921-1-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Felix Moessbauer <felix.moessbauer@siemens.com>
Date: Mon Sep 16 13:11:50 2024 +0200
io_uring/sqpoll: do not put cpumask on stack
commit 7f44beadcc11adb98220556d2ddbe9c97aa6d42d upstream.
Putting the cpumask on the stack is deprecated for a long time (since
2d3854a37e8), as these can be big. Given that, change the on-stack
allocation of allowed_mask to be dynamically allocated.
Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Link: https://lore.kernel.org/r/20240916111150.1266191-1-felix.moessbauer@siemens.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Mon Sep 16 02:58:06 2024 -0600
io_uring/sqpoll: retain test for whether the CPU is valid
commit a09c17240bdf2e9fa6d0591afa9448b59785f7d4 upstream.
A recent commit ensured that SQPOLL cannot be setup with a CPU that
isn't in the current tasks cpuset, but it also dropped testing whether
the CPU is valid in the first place. Without that, if a task passes in
a CPU value that is too high, the following KASAN splat can get
triggered:
BUG: KASAN: stack-out-of-bounds in io_sq_offload_create+0x858/0xaa4
Read of size 8 at addr ffff800089bc7b90 by task wq-aff.t/1391
CPU: 4 UID: 1000 PID: 1391 Comm: wq-aff.t Not tainted 6.11.0-rc7-00227-g371c468f4db6 #7080
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace.part.0+0xcc/0xe0
show_stack+0x14/0x1c
dump_stack_lvl+0x58/0x74
print_report+0x16c/0x4c8
kasan_report+0x9c/0xe4
__asan_report_load8_noabort+0x1c/0x24
io_sq_offload_create+0x858/0xaa4
io_uring_setup+0x1394/0x17c4
__arm64_sys_io_uring_setup+0x6c/0x180
invoke_syscall+0x6c/0x260
el0_svc_common.constprop.0+0x158/0x224
do_el0_svc+0x3c/0x5c
el0_svc+0x34/0x70
el0t_64_sync_handler+0x118/0x124
el0t_64_sync+0x168/0x16c
The buggy address belongs to stack of task wq-aff.t/1391
and is located at offset 48 in frame:
io_sq_offload_create+0x0/0xaa4
This frame has 1 object:
[32, 40) 'allowed_mask'
The buggy address belongs to the virtual mapping at
[ffff800089bc0000, ffff800089bc9000) created by:
kernel_clone+0x124/0x7e0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0000d740af80 pfn:0x11740a
memcg:ffff0000c2706f02
flags: 0xbffe00000000000(node=0|zone=2|lastcpupid=0x1fff)
raw: 0bffe00000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff0000d740af80 0000000000000000 00000001ffffffff ffff0000c2706f02
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff800089bc7a80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff800089bc7b00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>ffff800089bc7b80: 00 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
^
ffff800089bc7c00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
ffff800089bc7c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202409161632.cbeeca0d-lkp@intel.com
Fixes: f011c9cf04c0 ("io_uring/sqpoll: do not allow pinning outside of cpuset")
Tested-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Wed Sep 18 11:58:19 2024 -0600
io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
commit 04beb6e0e08c30c6f845f50afb7d7953603d7a6f upstream.
If some part of the kernel adds task_work that needs executing, in terms
of signaling it'll generally use TWA_SIGNAL or TWA_RESUME. Those two
directly translate to TIF_NOTIFY_SIGNAL or TIF_NOTIFY_RESUME, and can
be used for a variety of use case outside of task_work.
However, io_cqring_wait_schedule() only tests explicitly for
TIF_NOTIFY_SIGNAL. This means it can miss if task_work got added for
the task, but used a different kind of signaling mechanism (or none at
all). Normally this doesn't matter as any task_work will be run once
the task exits to userspace, except if:
1) The ring is setup with DEFER_TASKRUN
2) The local work item may generate normal task_work
For condition 2, this can happen when closing a file and it's the final
put of that file, for example. This can cause stalls where a task is
waiting to make progress inside io_cqring_wait(), but there's nothing else
that will wake it up. Hence change the "should we schedule or loop around"
check to check for the presence of task_work explicitly, rather than just
TIF_NOTIFY_SIGNAL as the mechanism. While in there, also change the
ordering of what type of task_work first in terms of ordering, to both
make it consistent with other task_work runs in io_uring, but also to
better handle the case of defer task_work generating normal task_work,
like in the above example.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Link: https://github.com/axboe/liburing/issues/1235
Cc: stable@vger.kernel.org
Fixes: 846072f16eed ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Thu Aug 29 21:06:11 2024 -0300
iommu/amd: Allocate the page table root using GFP_KERNEL
[ Upstream commit b0a6c883bcd42eeb0850135e529b34b64d57673c ]
Domain allocation is always done under a sleepable context, the v1 path
and other drivers use GFP_KERNEL already. Fix the v2 path to also use
GFP_KERNEL.
Fixes: 0d571dcbe7c6 ("iommu/amd: Allocate page table using numa locality info")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen Ni <nichen@iscas.ac.cn>
Date: Tue Jul 16 15:25:45 2024 +0800
iommu/amd: Convert comma to semicolon
[ Upstream commit 86c5eac3c4c4a2ee124d202af9a141bd0457ee68 ]
Replace a comma between expression statements by a semicolon.
Fixes: c9b258c6be09 ("iommu/amd: Prepare for generic IO page table framework")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240716072545.968690-1-nichen@iscas.ac.cn
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: 7a41dcb52f9d ("iommu/amd: Set the pgsize_bitmap correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Thu Aug 29 21:06:23 2024 -0300
iommu/amd: Do not set the D bit on AMD v2 table entries
[ Upstream commit 2910a7fa1be090fc7637cef0b2e70bcd15bf5469 ]
The manual says that bit 6 is IGN for all Page-Table Base Address
pointers, don't set it.
Fixes: aaac38f61487 ("iommu/amd: Initial support for AMD IOMMU v2 page table")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/14-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eliav Bar-ilan <eliavb@nvidia.com>
Date: Tue Sep 10 16:44:16 2024 -0300
iommu/amd: Fix argument order in amd_iommu_dev_flush_pasid_all()
commit 8386207f37e98453e1de3f51e50eeeea089103f9 upstream.
An incorrect argument order calling amd_iommu_dev_flush_pasid_pages()
causes improper flushing of the IOMMU, leaving the old value of GCR3 from
a previous process attached to the same PASID.
The function has the signature:
void amd_iommu_dev_flush_pasid_pages(struct iommu_dev_data *dev_data,
ioasid_t pasid, u64 address, size_t size)
Correct the argument order.
Cc: stable@vger.kernel.org
Fixes: 474bf01ed9f0 ("iommu/amd: Add support for device based TLB invalidation")
Signed-off-by: Eliav Bar-ilan <eliavb@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/0-v1-fc6bc37d8208+250b-amd_pasid_flush_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vasant Hegde <vasant.hegde@amd.com>
Date: Wed Aug 28 11:10:25 2024 +0000
iommu/amd: Handle error path in amd_iommu_probe_device()
[ Upstream commit 293aa9ec694e633bff83ab93715a2684e15fe214 ]
Do not try to set max_pasids in error path as dev_data is not allocated.
Fixes: a0c47f233e68 ("iommu/amd: Introduce iommu_dev_data.max_pasids")
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240828111029.5429-5-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Thu Aug 29 21:06:10 2024 -0300
iommu/amd: Move allocation of the top table into v1_alloc_pgtable
[ Upstream commit 8d00b77a52ef4b2091696ca25753d0ab95e4d839 ]
All the page table memory should be allocated/free within the io_pgtable
struct. The v2 path is already doing this, make it consistent.
It is hard to see but the free of the root in protection_domain_free() is
a NOP on the success path because v1_free_pgtable() does
amd_iommu_domain_clr_pt_root().
The root memory is already freed because free_sub_pt() put it on the
freelist. The free path in protection_domain_free() is only used during
error unwind of protection_domain_alloc().
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Stable-dep-of: 7a41dcb52f9d ("iommu/amd: Set the pgsize_bitmap correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Thu Aug 29 21:06:12 2024 -0300
iommu/amd: Set the pgsize_bitmap correctly
[ Upstream commit 7a41dcb52f9de6079621fc31c3b84c7fc290934b ]
When using io_pgtable the correct pgsize_bitmap is stored in the cfg, both
v1_alloc_pgtable() and v2_alloc_pgtable() set it correctly.
This fixes a bug where the v2 pgtable had the wrong pgsize as
protection_domain_init_v2() would set it and then do_iommu_domain_alloc()
immediately resets it.
Remove the confusing ops.pgsize_bitmap since that is not used if the
driver sets domain.pgsize_bitmap.
Fixes: 134288158a41 ("iommu/amd: Add domain_alloc_user based domain allocation")
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v2-831cdc4d00f3+1a315-amd_iopgtbl_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Sat Sep 7 21:48:12 2024 +0300
iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660
[ Upstream commit 19eb465c969f3d6ed1b98506d3e470e863b41e16 ]
The Qualcomm SDM630 / SDM660 platform requires the same kind of
workaround as MSM8998: some IOMMUs have context banks reserved by
firmware / TZ, touching those banks resets the board.
Apply the num_context_bank workaround to those two SMMU devices in order
to allow them to be used by Linux.
Fixes: b812834b5329 ("iommu: arm-smmu-qcom: Add sdm630/msm8998 compatibles for qcom quirks")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240907-sdm660-wifi-v1-1-e316055142f8@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marc Gonzalez <mgonzalez@freebox.fr>
Date: Tue Aug 20 15:27:19 2024 +0200
iommu/arm-smmu-qcom: hide last LPASS SMMU context bank from linux
[ Upstream commit 3a8990b8a778219327c5f8ecf10b5d81377b925a ]
On qcom msm8998, writing to the last context bank of lpass_q6_smmu
(base address 0x05100000) produces a system freeze & reboot.
The hardware/hypervisor reports 13 context banks for the LPASS SMMU
on msm8998, but only the first 12 are accessible...
Override the number of context banks
[ 2.546101] arm-smmu 5100000.iommu: probing hardware configuration...
[ 2.552439] arm-smmu 5100000.iommu: SMMUv2 with:
[ 2.558945] arm-smmu 5100000.iommu: stage 1 translation
[ 2.563627] arm-smmu 5100000.iommu: address translation ops
[ 2.568923] arm-smmu 5100000.iommu: non-coherent table walk
[ 2.574566] arm-smmu 5100000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 2.580220] arm-smmu 5100000.iommu: stream matching with 12 register groups
[ 2.587263] arm-smmu 5100000.iommu: 13 context banks (0 stage-2 only)
[ 2.614447] arm-smmu 5100000.iommu: Supported page sizes: 0x63315000
[ 2.621358] arm-smmu 5100000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
[ 2.627772] arm-smmu 5100000.iommu: preserved 0 boot mappings
Specifically, the crashes occur here:
qsmmu->bypass_cbndx = smmu->num_context_banks - 1;
arm_smmu_cb_write(smmu, qsmmu->bypass_cbndx, ARM_SMMU_CB_SCTLR, 0);
and here:
arm_smmu_write_context_bank(smmu, i);
arm_smmu_cb_write(smmu, i, ARM_SMMU_CB_FSR, ARM_SMMU_CB_FSR_FAULT);
It is likely that FW reserves the last context bank for its own use,
thus a simple work-around is: DON'T USE IT in Linux.
If we decrease the number of context banks, last one will be "hidden".
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240820-smmu-v3-1-2f71483b00ec@freebox.fr
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: 19eb465c969f ("iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konrad Dybcio <konradybcio@kernel.org>
Date: Sat Aug 24 01:12:01 2024 +0200
iommu/arm-smmu-qcom: Work around SDM845 Adreno SMMU w/ 16K pages
[ Upstream commit 2d42d3ba443706c9164fa0bef4e5fd1c36bc1bd9 ]
SDM845's Adreno SMMU is unique in that it actually advertizes support
for 16K (and 32M) pages, which doesn't hold for newer SoCs.
This however, seems either broken in the hardware implementation, the
hypervisor middleware that abstracts the SMMU, or there's a bug in the
Linux kernel somewhere down the line that nobody managed to track down.
Booting SDM845 with 16K page sizes and drm/msm results in:
*** gpu fault: ttbr0=0000000000000000 iova=000100000000c000 dir=READ
type=TRANSLATION source=CP (0,0,0,0)
right after loading the firmware. The GPU then starts spitting out
illegal intstruction errors, as it's quite obvious that it got a
bogus pointer.
Moreover, it seems like this issue also concerns other implementations
of SMMUv2 on Qualcomm SoCs, such as the one on SC7180.
Hide 16K support on such instances to work around this.
Reported-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240824-topic-845_gpu_smmu-v2-1-a302b8acc052@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: 19eb465c969f ("iommu/arm-smmu-qcom: apply num_context_bank fixes for SDM630 / SDM660")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Thu Aug 22 11:47:09 2024 -0300
iommufd/selftest: Fix buffer read overrrun in the dirty test
[ Upstream commit 79ea4a496ab5c970a3a793d863ed8893b1af107c ]
test_bit() is used to read the memory storing the bitmap, however
test_bit() always uses a unsigned long 8 byte access.
If the bitmap is not an aligned size of 64 bits this will now trigger a
KASAN warning reading past the end of the buffer.
Properly round the buffer allocation to an unsigned long size. Continue to
copy_from_user() using a byte granularity.
Fixes: 9560393b830b ("iommufd/selftest: Fix iommufd_test_dirty() to handle <u8 bitmaps")
Link: https://patch.msgid.link/r/0-v1-113e8d9e7861+5ae-iommufd_kasan_jgg@nvidia.com
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Thu Aug 29 10:19:59 2024 -0300
iommufd: Check the domain owner of the parent before creating a nesting domain
[ Upstream commit 73183ad6ea51029d04b098286dcee98d715015f1 ]
This check was missed, before we can pass a struct iommu_domain to a
driver callback we need to validate that the domain was created by that
driver.
Fixes: bd529dbb661d ("iommufd: Add a nested HW pagetable object")
Link: https://patch.msgid.link/r/0-v1-c8770519edde+1a-iommufd_nesting_ops_jgg@nvidia.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Gunthorpe <jgg@ziepe.ca>
Date: Tue Aug 27 13:46:45 2024 -0300
iommufd: Protect against overflow of ALIGN() during iova allocation
commit 8f6887349b2f829a4121c518aeb064fc922714e4 upstream.
Userspace can supply an iova and uptr such that the target iova alignment
becomes really big and ALIGN() overflows which corrupts the selected area
range during allocation. CONFIG_IOMMUFD_TEST can detect this:
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
WARNING: CPU: 1 PID: 5092 at drivers/iommu/iommufd/io_pagetable.c:268 iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Modules linked in:
CPU: 1 PID: 5092 Comm: syz-executor294 Not tainted 6.10.0-rc5-syzkaller-00294-g3ffea9a7a6f7 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
RIP: 0010:iopt_alloc_area_pages drivers/iommu/iommufd/io_pagetable.c:268 [inline]
RIP: 0010:iopt_map_pages+0xf95/0x1050 drivers/iommu/iommufd/io_pagetable.c:352
Code: fc e9 a4 f3 ff ff e8 1a 8b 4c fc 41 be e4 ff ff ff e9 8a f3 ff ff e8 0a 8b 4c fc 90 0f 0b 90 e9 37 f5 ff ff e8 fc 8a 4c fc 90 <0f> 0b 90 e9 68 f3 ff ff 48 c7 c1 ec 82 ad 8f 80 e1 07 80 c1 03 38
RSP: 0018:ffffc90003ebf9e0 EFLAGS: 00010293
RAX: ffffffff85499fa4 RBX: 00000000ffffffef RCX: ffff888079b49e00
RDX: 0000000000000000 RSI: 00000000ffffffef RDI: 0000000000000000
RBP: ffffc90003ebfc50 R08: ffffffff85499b30 R09: ffffffff85499942
R10: 0000000000000002 R11: ffff888079b49e00 R12: ffff8880228e0010
R13: 0000000000000000 R14: 1ffff920007d7f68 R15: ffffc90003ebfd00
FS: 000055557d760380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000005fdeb8 CR3: 000000007404a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
iommufd_ioas_copy+0x610/0x7b0 drivers/iommu/iommufd/ioas.c:274
iommufd_fops_ioctl+0x4d9/0x5a0 drivers/iommu/iommufd/main.c:421
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Cap the automatic alignment to the huge page size, which is probably a
better idea overall. Huge automatic alignments can fragment and chew up
the available IOVA space without any reason.
Link: https://patch.msgid.link/r/0-v1-8009738b9891+1f7-iommufd_align_overflow_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: 51fe6141f0f6 ("iommufd: Data structure to provide IOVA to PFN mapping")
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reported-by: syzbot+16073ebbc4c64b819b47@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000388410061a74f014@google.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Sun Sep 1 11:02:11 2024 +0200
ipmi: docs: don't advertise deprecated sysfs entries
[ Upstream commit 64dce81f8c373c681e62d5ffe0397c45a35d48a2 ]
"i2c-adapter" class entries are deprecated since 2009. Switch to the
proper location.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Closes: https://lore.kernel.org/r/80c4a898-5867-4162-ac85-bdf7c7c68746@gmail.com
Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20240901090211.3797-2-wsa+renesas@sang-engineering.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Sep 13 08:31:47 2024 +0000
ipv6: avoid possible NULL deref in rt6_uncached_list_flush_dev()
[ Upstream commit 04ccecfa959d3b9ae7348780d8e379c6486176ac ]
Blamed commit accidentally removed a check for rt->rt6i_idev being NULL,
as spotted by syzbot:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 UID: 0 PID: 10998 Comm: syz-executor Not tainted 6.11.0-rc6-syzkaller-00208-g625403177711 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline]
RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914
Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06
RSP: 0018:ffffc900047374e0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0
RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c
R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18
R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930
FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
addrconf_ifdown+0x15d/0x1bd0 net/ipv6/addrconf.c:3856
addrconf_notify+0x3cb/0x1020
notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93
call_netdevice_notifiers_extack net/core/dev.c:2032 [inline]
call_netdevice_notifiers net/core/dev.c:2046 [inline]
unregister_netdevice_many_notify+0xd81/0x1c40 net/core/dev.c:11352
unregister_netdevice_many net/core/dev.c:11414 [inline]
unregister_netdevice_queue+0x303/0x370 net/core/dev.c:11289
unregister_netdevice include/linux/netdevice.h:3129 [inline]
__tun_detach+0x6b9/0x1600 drivers/net/tun.c:685
tun_detach drivers/net/tun.c:701 [inline]
tun_chr_close+0x108/0x1b0 drivers/net/tun.c:3510
__fput+0x24a/0x8a0 fs/file_table.c:422
task_work_run+0x24f/0x310 kernel/task_work.c:228
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0xa2f/0x27f0 kernel/exit.c:882
do_group_exit+0x207/0x2c0 kernel/exit.c:1031
__do_sys_exit_group kernel/exit.c:1042 [inline]
__se_sys_exit_group kernel/exit.c:1040 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1040
x64_sys_call+0x2634/0x2640 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1acc77def9
Code: Unable to access opcode bytes at 0x7f1acc77decf.
RSP: 002b:00007ffeb26fa738 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1acc77def9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000043
RBP: 00007f1acc7dd508 R08: 00007ffeb26f84d7 R09: 0000000000000003
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000000003 R14: 00000000ffffffff R15: 00007ffeb26fa8e0
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:rt6_uncached_list_flush_dev net/ipv6/route.c:177 [inline]
RIP: 0010:rt6_disable_ip+0x33e/0x7e0 net/ipv6/route.c:4914
Code: 41 80 3c 04 00 74 0a e8 90 d0 9b f7 48 8b 7c 24 08 48 8b 07 48 89 44 24 10 4c 89 f0 48 c1 e8 03 48 b9 00 00 00 00 00 fc ff df <80> 3c 08 00 74 08 4c 89 f7 e8 64 d0 9b f7 48 8b 44 24 18 49 39 06
RSP: 0018:ffffc900047374e0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 1ffff1100fdf8f33 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff88807efc78c0
RBP: ffffc900047375d0 R08: 0000000000000003 R09: fffff520008e6e8c
R10: dffffc0000000000 R11: fffff520008e6e8c R12: 1ffff1100fdf8f18
R13: ffff88807efc7998 R14: 0000000000000000 R15: ffff88807efc7930
FS: 0000000000000000(0000) GS:ffff8880b8900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002a80 CR3: 0000000022f62000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: e332bc67cf5e ("ipv6: Don't call with rt6_uncached_list_flush_dev")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20240913083147.3095442-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeongjun Park <aha310510@gmail.com>
Date: Mon Aug 19 13:05:46 2024 +0900
jfs: fix out-of-bounds in dbNextAG() and diAlloc()
[ Upstream commit e63866a475562810500ea7f784099bfe341e761a ]
In dbNextAG() , there is no check for the case where bmp->db_numag is
greater or same than MAXAG due to a polluted image, which causes an
out-of-bounds. Therefore, a bounds check should be added in dbMount().
And in dbNextAG(), a check for the case where agpref is greater than
bmp->db_numag should be added, so an out-of-bounds exception should be
prevented.
Additionally, a check for the case where agno is greater or same than
MAXAG should be added in diAlloc() to prevent out-of-bounds.
Reported-by: Jeongjun Park <aha310510@gmail.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roman Smirnov <r.smirnov@omp.ru>
Date: Tue Sep 17 18:54:53 2024 +0300
KEYS: prevent NULL pointer dereference in find_asymmetric_key()
commit 70fd1966c93bf3bfe3fe6d753eb3d83a76597eef upstream.
In find_asymmetric_key(), if all NULLs are passed in the id_{0,1,2}
arguments, the kernel will first emit WARN but then have an oops
because id_2 gets dereferenced anyway.
Add the missing id_2 check and move WARN_ON() to the final else branch
to avoid duplicate NULL checks.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Cc: stable@vger.kernel.org # v5.17+
Fixes: 7d30198ee24f ("keys: X.509 public key issuer lookup without AKID")
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mark Brown <broonie@kernel.org>
Date: Thu Aug 29 18:20:09 2024 +0100
kselftest/arm64: Actually test SME vector length changes via sigreturn
[ Upstream commit 6f0315330af7a57c1c00587fdfb69c7778bf1c50 ]
The test case for SME vector length changes via sigreturn use a bit too
much cut'n'paste and only actually changed the SVE vector length in the
test itself. Andre's recent factoring out of the initialisation code caused
this to be exposed and the test to start failing. Fix the test to actually
cover the thing it's supposed to test.
Fixes: 4963aeb35a9e ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240829-arm64-sme-signal-vl-change-test-v1-1-42d7534cb818@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andre Przywara <andre.przywara@arm.com>
Date: Wed Aug 21 17:44:01 2024 +0100
kselftest/arm64: signal: fix/refactor SVE vector length enumeration
[ Upstream commit 5225b6562b9a7dc808d5a1e465aaf5e2ebb220cd ]
Currently a number of SVE/SME related tests have almost identical
functions to enumerate all supported vector lengths. However over time
the copy&pasted code has diverged, allowing some bugs to creep in:
- fake_sigreturn_sme_change_vl reports a failure, not a SKIP if only
one vector length is supported (but the SVE version is fine)
- fake_sigreturn_sme_change_vl tries to set the SVE vector length, not
the SME one (but the other SME tests are fine)
- za_no_regs keeps iterating forever if only one vector length is
supported (but za_regs is correct)
Since those bugs seem to be mostly copy&paste ones, let's consolidate
the enumeration loop into one shared function, and just call that from
each test. That should fix the above bugs, and prevent similar issues
from happening again.
Fixes: 4963aeb35a9e ("kselftest/arm64: signal: Add SME signal handling tests")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240821164401.3598545-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Date: Mon Jul 29 16:56:02 2024 -0400
kselftest: dt: Ignore nodes that have ancestors disabled
[ Upstream commit 05144ab7b7eaf531fc728fcb79dcf36b621ff42d ]
Filter out nodes that have one of its ancestors disabled as they aren't
expected to probe.
This removes the following false-positive failures on the
sc7180-trogdor-lazor-limozeen-nots-r5 platform:
/soc@0/geniqup@8c0000/i2c@894000/proximity@28
/soc@0/geniqup@ac0000/spi@a90000/ec@0
/soc@0/remoteproc@62400000/glink-edge/apr
/soc@0/remoteproc@62400000/glink-edge/apr/service@3
/soc@0/remoteproc@62400000/glink-edge/apr/service@4
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@7
/soc@0/remoteproc@62400000/glink-edge/apr/service@7/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@8
/soc@0/remoteproc@62400000/glink-edge/apr/service@8/routing
/soc@0/remoteproc@62400000/glink-edge/fastrpc
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@3
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@4
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@5
/soc@0/spmi@c440000/pmic@0/pon@800/pwrkey
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240729-dt-kselftest-parent-disabled-v2-1-d7a001c4930d@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Tue Sep 3 20:26:33 2024 +0900
ksmbd: allow write with FILE_APPEND_DATA
commit 2fb9b5dc80cabcee636a6ccd020740dd925b4580 upstream.
Windows client write with FILE_APPEND_DATA when using git.
ksmbd should allow write it with this flags.
Z:\test>git commit -m "test"
fatal: cannot update the ref 'HEAD': unable to append to
'.git/logs/HEAD': Bad file descriptor
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Namjae Jeon <linkinjeon@kernel.org>
Date: Sun Sep 8 15:23:48 2024 +0900
ksmbd: handle caseless file creation
commit c5a709f08d40b1a082e44ffcde1aea4d2822ddd5 upstream.
Ray Zhang reported ksmbd can not create file if parent filename is
caseless.
Y:\>mkdir A
Y:\>echo 123 >a\b.txt
The system cannot find the path specified.
Y:\>echo 123 >A\b.txt
This patch convert name obtained by caseless lookup to parent name.
Cc: stable@vger.kernel.org # v5.15+
Reported-by: Ray Zhang <zhanglei002@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hobin Woo <hobin.woo@samsung.com>
Date: Wed Sep 4 13:36:35 2024 +0900
ksmbd: make __dir_empty() compatible with POSIX
commit ca4974ca954561e79f8871d220bb08f14f64f57c upstream.
Some file systems may not provide dot (.) and dot-dot (..) as they are
optional in POSIX. ksmbd can misjudge emptiness of a directory in those
file systems, since it assumes there are always at least two entries:
dot and dot-dot.
Just don't count dot and dot-dot.
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Hobin Woo <hobin.woo@samsung.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chen Yu <yu.c.chen@intel.com>
Date: Tue Aug 27 19:23:08 2024 +0800
kthread: fix task state in kthread worker if being frozen
[ Upstream commit e16c7b07784f3fb03025939c4590b9a7c64970a7 ]
When analyzing a kernel waring message, Peter pointed out that there is a
race condition when the kworker is being frozen and falls into
try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a
might_sleep() warning in try_to_freeze(). Although the root cause is not
related to freeze()[1], it is still worthy to fix this issue ahead.
One possible race scenario:
CPU 0 CPU 1
----- -----
// kthread_worker_fn
set_current_state(TASK_INTERRUPTIBLE);
suspend_freeze_processes()
freeze_processes
static_branch_inc(&freezer_active);
freeze_kernel_threads
pm_nosig_freezing = true;
if (work) { //false
__set_current_state(TASK_RUNNING);
} else if (!freezing(current)) //false, been frozen
freezing():
if (static_branch_unlikely(&freezer_active))
if (pm_nosig_freezing)
return true;
schedule()
}
// state is still TASK_INTERRUPTIBLE
try_to_freeze()
might_sleep() <--- warning
Fix this by explicitly set the TASK_RUNNING before entering
try_to_freeze().
Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1]
Link: https://lkml.kernel.org/r/20240827112308.181081-1-yu.c.chen@intel.com
Fixes: b56c0d8937e6 ("kthread: implement kthread_worker")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Snehal Koukuntla <snehalreddy@google.com>
Date: Mon Sep 9 18:01:54 2024 +0000
KVM: arm64: Add memory length checks and remove inline in do_ffa_mem_xfer
commit f26a525b77e040d584e967369af1e018d2d59112 upstream.
When we share memory through FF-A and the description of the buffers
exceeds the size of the mapped buffer, the fragmentation API is used.
The fragmentation API allows specifying chunks of descriptors in subsequent
FF-A fragment calls and no upper limit has been established for this.
The entire memory region transferred is identified by a handle which can be
used to reclaim the transferred memory.
To be able to reclaim the memory, the description of the buffers has to fit
in the ffa_desc_buf.
Add a bounds check on the FF-A sharing path to prevent the memory reclaim
from failing.
Also do_ffa_mem_xfer() does not need __always_inline, except for the
BUILD_BUG_ON() aspect, which gets moved to a macro.
[maz: fixed the BUILD_BUG_ON() breakage with LLVM, thanks to Wei-Lin Chang
for the timely report]
Fixes: 634d90cf0ac65 ("KVM: arm64: Handle FFA_MEM_LEND calls from the host")
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ene <sebastianene@google.com>
Signed-off-by: Snehal Koukuntla <snehalreddy@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240909180154.3267939-1-snehalreddy@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Thu Aug 29 21:35:51 2024 -0700
KVM: Use dedicated mutex to protect kvm_usage_count to avoid deadlock
commit 44d17459626052a2390457e550a12cb973506b2f upstream.
Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock
on x86 due to a chain of locks and SRCU synchronizations. Translating the
below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on
CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the
fairness of r/w semaphores).
CPU0 CPU1 CPU2
1 lock(&kvm->slots_lock);
2 lock(&vcpu->mutex);
3 lock(&kvm->srcu);
4 lock(cpu_hotplug_lock);
5 lock(kvm_lock);
6 lock(&kvm->slots_lock);
7 lock(cpu_hotplug_lock);
8 sync(&kvm->srcu);
Note, there are likely more potential deadlocks in KVM x86, e.g. the same
pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with
__kvmclock_cpufreq_notifier():
cpuhp_cpufreq_online()
|
-> cpufreq_online()
|
-> cpufreq_gov_performance_limits()
|
-> __cpufreq_driver_target()
|
-> __target_index()
|
-> cpufreq_freq_transition_begin()
|
-> cpufreq_notify_transition()
|
-> ... __kvmclock_cpufreq_notifier()
But, actually triggering such deadlocks is beyond rare due to the
combination of dependencies and timings involved. E.g. the cpufreq
notifier is only used on older CPUs without a constant TSC, mucking with
the NX hugepage mitigation while VMs are running is very uncommon, and
doing so while also onlining/offlining a CPU (necessary to generate
contention on cpu_hotplug_lock) would be even more unusual.
The most robust solution to the general cpu_hotplug_lock issue is likely
to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq
notifier doesn't to take kvm_lock. For now, settle for fixing the most
blatant deadlock, as switching to an RCU-protected list is a much more
involved change, but add a comment in locking.rst to call out that care
needs to be taken when walking holding kvm_lock and walking vm_list.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O
------------------------------------------------------
tee/35048 is trying to acquire lock:
ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm]
but task is already holding lock:
ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kvm_lock){+.+.}-{3:3}:
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
kvm_dev_ioctl+0x4fb/0xe50 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x2e/0xb0
static_key_slow_inc+0x16/0x30
kvm_lapic_set_base+0x6a/0x1c0 [kvm]
kvm_set_apic_base+0x8f/0xe0 [kvm]
kvm_set_msr_common+0x9ae/0xf80 [kvm]
vmx_set_msr+0xa54/0xbe0 [kvm_intel]
__kvm_set_msr+0xb6/0x1a0 [kvm]
kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm]
kvm_vcpu_ioctl+0x485/0x5b0 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&kvm->srcu){.+.+}-{0:0}:
__synchronize_srcu+0x44/0x1a0
synchronize_srcu_expedited+0x21/0x30
kvm_swap_active_memslots+0x110/0x1c0 [kvm]
kvm_set_memslot+0x360/0x620 [kvm]
__kvm_set_memory_region+0x27b/0x300 [kvm]
kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm]
kvm_vm_ioctl+0x295/0x650 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&kvm->slots_lock){+.+.}-{3:3}:
__lock_acquire+0x15ef/0x2e30
lock_acquire+0xe0/0x260
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
set_nx_huge_pages+0x179/0x1e0 [kvm]
param_attr_store+0x93/0x100
module_attr_store+0x22/0x40
sysfs_kf_write+0x81/0xb0
kernfs_fop_write_iter+0x133/0x1d0
vfs_write+0x28d/0x380
ksys_write+0x70/0xe0
__x64_sys_write+0x1f/0x30
x64_sys_call+0x281b/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: Chao Gao <chao.gao@intel.com>
Fixes: 0bf50497f03b ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock")
Cc: stable@vger.kernel.org
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Hou Wenlong <houwenlong.hwl@antgroup.com>
Date: Mon May 6 14:35:02 2024 +0800
KVM: x86: Drop unused check_apicv_inhibit_reasons() callback definition
[ Upstream commit c7d4c5f01961cdc4f1d29525e2b0d71f62c5bc33 ]
The check_apicv_inhibit_reasons() callback implementation was dropped in
the commit b3f257a84696 ("KVM: x86: Track required APICv inhibits with
variable, not callback"), but the definition removal was missed in the
final version patch (it was removed in the v4). Therefore, it should be
dropped, and the vmx_check_apicv_inhibit_reasons() function declaration
should also be removed.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Link: https://lore.kernel.org/r/54abd1d0ccaba4d532f81df61259b9c0e021fbde.1714977229.git.houwenlong.hwl@antgroup.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 73b42dc69be8 ("KVM: x86: Re-split x2APIC ICR into ICR+ICR2 for AMD (x2AVIC)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jul 19 16:50:58 2024 -0700
KVM: x86: Enforce x2APIC's must-be-zero reserved ICR bits
commit 71bf395a276f0578d19e0ae137a7d1d816d08e0e upstream.
Inject a #GP on a WRMSR(ICR) that attempts to set any reserved bits that
are must-be-zero on both Intel and AMD, i.e. any reserved bits other than
the BUSY bit, which Intel ignores and basically says is undefined.
KVM's xapic_state_test selftest has been fudging the bug since commit
4b88b1a518b3 ("KVM: selftests: Enhance handling WRMSR ICR register in
x2APIC mode"), which essentially removed the testcase instead of fixing
the bug.
WARN if the nodecode path triggers a #GP, as the CPU is supposed to check
reserved bits for ICR when it's partially virtualized.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240719235107.3023592-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Aug 2 13:29:40 2024 -0700
KVM: x86: Make x2APIC ID 100% readonly
[ Upstream commit 4b7c3f6d04bd53f2e5b228b6821fb8f5d1ba3071 ]
Ignore the userspace provided x2APIC ID when fixing up APIC state for
KVM_SET_LAPIC, i.e. make the x2APIC fully readonly in KVM. Commit
a92e2543d6a8 ("KVM: x86: use hardware-compatible format for APIC ID
register"), which added the fixup, didn't intend to allow userspace to
modify the x2APIC ID. In fact, that commit is when KVM first started
treating the x2APIC ID as readonly, apparently to fix some race:
static inline u32 kvm_apic_id(struct kvm_lapic *apic)
{
- return (kvm_lapic_get_reg(apic, APIC_ID) >> 24) & 0xff;
+ /* To avoid a race between apic_base and following APIC_ID update when
+ * switching to x2apic_mode, the x2apic mode returns initial x2apic id.
+ */
+ if (apic_x2apic_mode(apic))
+ return apic->vcpu->vcpu_id;
+
+ return kvm_lapic_get_reg(apic, APIC_ID) >> 24;
}
Furthermore, KVM doesn't support delivering interrupts to vCPUs with a
modified x2APIC ID, but KVM *does* return the modified value on a guest
RDMSR and for KVM_GET_LAPIC. I.e. no remotely sane setup can actually
work with a modified x2APIC ID.
Making the x2APIC ID fully readonly fixes a WARN in KVM's optimized map
calculation, which expects the LDR to align with the x2APIC ID.
WARNING: CPU: 2 PID: 958 at arch/x86/kvm/lapic.c:331 kvm_recalculate_apic_map+0x609/0xa00 [kvm]
CPU: 2 PID: 958 Comm: recalc_apic_map Not tainted 6.4.0-rc3-vanilla+ #35
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.2-1-1 04/01/2014
RIP: 0010:kvm_recalculate_apic_map+0x609/0xa00 [kvm]
Call Trace:
<TASK>
kvm_apic_set_state+0x1cf/0x5b0 [kvm]
kvm_arch_vcpu_ioctl+0x1806/0x2100 [kvm]
kvm_vcpu_ioctl+0x663/0x8a0 [kvm]
__x64_sys_ioctl+0xb8/0xf0
do_syscall_64+0x56/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fade8b9dd6f
Unfortunately, the WARN can still trigger for other CPUs than the current
one by racing against KVM_SET_LAPIC, so remove it completely.
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/all/814baa0c-1eaa-4503-129f-059917365e80@rbox.co
Reported-by: Haoyu Wu <haoyuwu254@gmail.com>
Closes: https://lore.kernel.org/all/20240126161633.62529-1-haoyuwu254@gmail.com
Reported-by: syzbot+545f1326f405db4e1c3e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000c2a6b9061cbca3c3@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240802202941.344889-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stable-dep-of: 73b42dc69be8 ("KVM: x86: Re-split x2APIC ICR into ICR+ICR2 for AMD (x2AVIC)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jul 19 16:50:59 2024 -0700
KVM: x86: Move x2APIC ICR helper above kvm_apic_write_nodecode()
commit d33234342f8b468e719e05649fd26549fb37ef8a upstream.
Hoist kvm_x2apic_icr_write() above kvm_apic_write_nodecode() so that a
local helper to _read_ the x2APIC ICR can be added and used in the
nodecode path without needing a forward declaration.
No functional change intended.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240719235107.3023592-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jul 19 16:51:00 2024 -0700
KVM: x86: Re-split x2APIC ICR into ICR+ICR2 for AMD (x2AVIC)
[ Upstream commit 73b42dc69be8564d4951a14d00f827929fe5ef79 ]
Re-introduce the "split" x2APIC ICR storage that KVM used prior to Intel's
IPI virtualization support, but only for AMD. While not stated anywhere
in the APM, despite stating the ICR is a single 64-bit register, AMD CPUs
store the 64-bit ICR as two separate 32-bit values in ICR and ICR2. When
IPI virtualization (IPIv on Intel, all AVIC flavors on AMD) is enabled,
KVM needs to match CPU behavior as some ICR ICR writes will be handled by
the CPU, not by KVM.
Add a kvm_x86_ops knob to control the underlying format used by the CPU to
store the x2APIC ICR, and tune it to AMD vs. Intel regardless of whether
or not x2AVIC is enabled. If KVM is handling all ICR writes, the storage
format for x2APIC mode doesn't matter, and having the behavior follow AMD
versus Intel will provide better test coverage and ease debugging.
Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode")
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20240719235107.3023592-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Date: Sun Jul 21 17:19:03 2024 +0200
leds: bd2606mvv: Fix device child node usage in bd2606mvv_probe()
[ Upstream commit ffbf1fcb421429916a861cfc25dfe0c6387dda75 ]
The current implementation accesses the `child` fwnode handle outside of
fwnode_for_each_available_child_node() without incrementing its
refcount. Add the missing call to `fwnode_handle_get(child)`.
The cleanup process where `child` is accessed is not right either
because a single call to `fwnode_handle_put()` is carried out in case of
an error, ignoring unasigned nodes at the point when the error happens.
Keep `child` inside of the first loop, and use the helper pointer that
receives references via `fwnode_handle_get()` to handle the child nodes
within the second loop.
Moreover, the iterated nodes are direct children of the device node,
and the `device_for_each_child_node()` macro accounts for child node
availability. By restricting `child` to live within that loop, the
scoped version of it can be used to simplify the error handling.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
Use `device_for_each_child_node_scoped()` to indicate device's direct
child nodes.
Fixes: 8325642d2757 ("leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240721-device_for_each_child_node-available-v2-3-f33748fd8b2d@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Tue Jul 16 14:24:59 2024 -0700
leds: gpio: Set num_leds after allocation
[ Upstream commit 045391a02bd971d431c83ad03f7cc51b6e2fe331 ]
With the new __counted_by annotation, the "num_leds" variable needs to
valid for accesses to the "leds" array. This requirement is not met in
gpio_leds_create(), since "num_leds" starts at "0", so "leds" index "0"
will not be considered valid (num_leds would need to be "1" to access
index "0").
Fix this by setting the allocation size after allocation, and then update
the final count based on how many were actually added to the array.
Fixes: 52cd75108a42 ("leds: gpio: Annotate struct gpio_leds_priv with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716212455.work.809-kees@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pieterjan Camerlynck <pieterjanca@gmail.com>
Date: Thu Jul 11 14:49:51 2024 +0200
leds: leds-pca995x: Add support for NXP PCA9956B
[ Upstream commit 68d6520d2e76998cdea58f6dd8782de5ab5b28af ]
Add support for PCA9956B chip, which belongs to the same family.
This chip features 24 instead of 16 outputs, so add a chipdef struct to
deal with the different register layouts.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Pieterjan Camerlynck <pieterjanca@gmail.com>
Link: https://lore.kernel.org/r/20240711-pca995x-v4-2-702a67148065@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 82c5ada1f9d0 ("leds: pca995x: Fix device child node usage in pca995x_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Date: Wed Aug 7 15:37:03 2024 +0200
leds: pca995x: Fix device child node usage in pca995x_probe()
[ Upstream commit 82c5ada1f9d05902a4ccb926c7ce34e2fe699283 ]
The current implementation accesses the `child` fwnode handle outside of
device_for_each_child_node() without incrementing its refcount.
Add the missing call to `fwnode_handle_get(child)`.
The cleanup process where `child` is accessed is not right either
because a single call to `fwnode_handle_put()` is carried out in case of
an error, ignoring unasigned nodes at the point when the error happens.
Keep `child` inside of the first loop, and use the helper pointer that
receives references via `fwnode_handle_get()` to handle the child nodes
within the second loop. Keeping `child` inside the first node has also
the advantage that the scoped version of the loop can be used.
Fixes: ee4e80b2962e ("leds: pca995x: Add support for PCA995X chips")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240807-leds-pca995x-fix-fwnode-usage-v1-1-8057c84dc583@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Date: Mon Aug 5 16:49:45 2024 +0200
leds: pca995x: Use device_for_each_child_node() to access device child nodes
[ Upstream commit 6eefd65ba6ae29ab801f6461e59c10f93dd496f8 ]
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
Use `device_for_each_child_node()` to indicate device's direct child
nodes.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240805-device_for_each_child_node-available-v3-2-48243a4aa5c0@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 82c5ada1f9d0 ("leds: pca995x: Fix device child node usage in pca995x_probe()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ming Lei <ming.lei@redhat.com>
Date: Thu Sep 19 10:17:09 2024 +0800
lib/sbitmap: define swap_lock as raw_spinlock_t
[ Upstream commit 65f666c6203600053478ce8e34a1db269a8701c9 ]
When called from sbitmap_queue_get(), sbitmap_deferred_clear() may be run
with preempt disabled. In RT kernel, spin_lock() can sleep, then warning
of "BUG: sleeping function called from invalid context" can be triggered.
Fix it by replacing it with raw_spin_lock.
Cc: Yang Yang <yang.yang@vivo.com>
Fixes: 72d04bdcf3f7 ("sbitmap: fix io hung due to race on sbitmap_word::cleared")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yang Yang <yang.yang@vivo.com>
Link: https://lore.kernel.org/r/20240919021709.511329-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Vernet <void@manifault.com>
Date: Wed Jul 24 12:14:58 2024 -0500
libbpf: Don't take direct pointers into BTF data from st_ops
[ Upstream commit 04a94133f1b3cccb19e056c26f056c50b4e5b3b1 ]
In struct bpf_struct_ops, we have take a pointer to a BTF type name, and
a struct btf_type. This was presumably done for convenience, but can
actually result in subtle and confusing bugs given that BTF data can be
invalidated before a program is loaded. For example, in sched_ext, we
may sometimes resize a data section after a skeleton has been opened,
but before the struct_ops scheduler map has been loaded. This may cause
the BTF data to be realloc'd, which can then cause a UAF when loading
the program because the struct_ops map has pointers directly into the
BTF data.
We're already storing the BTF type_id in struct bpf_struct_ops. Because
type_id is stable, we can therefore just update the places where we were
looking at those pointers to instead do the lookups we need from the
type_id.
Fixes: 590a00888250 ("bpf: libbpf: Add STRUCT_OPS support")
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240724171459.281234-1-void@manifault.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrii Nakryiko <andrii@kernel.org>
Date: Tue Aug 27 13:37:21 2024 -0700
libbpf: Fix bpf_object__open_skeleton()'s mishandling of options
[ Upstream commit c634d6f4e12d00c954410ba11db45799a8c77b5b ]
We do an ugly copying of options in bpf_object__open_skeleton() just to
be able to set object name from skeleton's recorded name (while still
allowing user to override it through opts->object_name).
This is not just ugly, but it also is broken due to memcpy() that
doesn't take into account potential skel_opts' and user-provided opts'
sizes differences due to backward and forward compatibility. This leads
to copying over extra bytes and then failing to validate options
properly. It could, technically, lead also to SIGSEGV, if we are unlucky.
So just get rid of that memory copy completely and instead pass
default object name into bpf_object_open() directly, simplifying all
this significantly. The rule now is that obj_name should be non-NULL for
bpf_object_open() when called with in-memory buffer, so validate that
explicitly as well.
We adopt bpf_object__open_mem() to this as well and generate default
name (based on buffer memory address and size) outside of bpf_object_open().
Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support")
Reported-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Daniel Müller <deso@posteo.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240827203721.1145494-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri Oct 4 16:33:50 2024 +0200
Linux 6.10.13
Link: https://lore.kernel.org/r/20241002125811.070689334@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Kexy Biscuit <kexybiscuit@aosc.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhiguo Niu <zhiguo.niu@unisoc.com>
Date: Thu Jun 20 22:54:34 2024 +0000
lockdep: fix deadlock issue between lockdep and rcu
commit a6f88ac32c6e63e69c595bfae220d8641704c9b7 upstream.
There is a deadlock scenario between lockdep and rcu when
rcu nocb feature is enabled, just as following call stack:
rcuop/x
-000|queued_spin_lock_slowpath(lock = 0xFFFFFF817F2A8A80, val = ?)
-001|queued_spin_lock(inline) // try to hold nocb_gp_lock
-001|do_raw_spin_lock(lock = 0xFFFFFF817F2A8A80)
-002|__raw_spin_lock_irqsave(inline)
-002|_raw_spin_lock_irqsave(lock = 0xFFFFFF817F2A8A80)
-003|wake_nocb_gp_defer(inline)
-003|__call_rcu_nocb_wake(rdp = 0xFFFFFF817F30B680)
-004|__call_rcu_common(inline)
-004|call_rcu(head = 0xFFFFFFC082EECC28, func = ?)
-005|call_rcu_zapped(inline)
-005|free_zapped_rcu(ch = ?)// hold graph lock
-006|rcu_do_batch(rdp = 0xFFFFFF817F245680)
-007|nocb_cb_wait(inline)
-007|rcu_nocb_cb_kthread(arg = 0xFFFFFF817F245680)
-008|kthread(_create = 0xFFFFFF80803122C0)
-009|ret_from_fork(asm)
rcuop/y
-000|queued_spin_lock_slowpath(lock = 0xFFFFFFC08291BBC8, val = 0)
-001|queued_spin_lock()
-001|lockdep_lock()
-001|graph_lock() // try to hold graph lock
-002|lookup_chain_cache_add()
-002|validate_chain()
-003|lock_acquire
-004|_raw_spin_lock_irqsave(lock = 0xFFFFFF817F211D80)
-005|lock_timer_base(inline)
-006|mod_timer(inline)
-006|wake_nocb_gp_defer(inline)// hold nocb_gp_lock
-006|__call_rcu_nocb_wake(rdp = 0xFFFFFF817F2A8680)
-007|__call_rcu_common(inline)
-007|call_rcu(head = 0xFFFFFFC0822E0B58, func = ?)
-008|call_rcu_hurry(inline)
-008|rcu_sync_call(inline)
-008|rcu_sync_func(rhp = 0xFFFFFFC0822E0B58)
-009|rcu_do_batch(rdp = 0xFFFFFF817F266680)
-010|nocb_cb_wait(inline)
-010|rcu_nocb_cb_kthread(arg = 0xFFFFFF817F266680)
-011|kthread(_create = 0xFFFFFF8080363740)
-012|ret_from_fork(asm)
rcuop/x and rcuop/y are rcu nocb threads with the same nocb gp thread.
This patch release the graph lock before lockdep call_rcu.
Fixes: a0b0fd53e1e6 ("locking/lockdep: Free lock classes that are no longer in use")
Cc: stable@vger.kernel.org
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240620225436.3127927-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Paul Moore <paul@paul-moore.com>
Date: Tue Jul 9 19:43:06 2024 -0400
lsm: add the inode_free_security_rcu() LSM implementation hook
commit 63dff3e48871b0583be5032ff8fb7260c349a18c upstream.
The LSM framework has an existing inode_free_security() hook which
is used by LSMs that manage state associated with an inode, but
due to the use of RCU to protect the inode, special care must be
taken to ensure that the LSMs do not fully release the inode state
until it is safe from a RCU perspective.
This patch implements a new inode_free_security_rcu() implementation
hook which is called when it is safe to free the LSM's internal inode
state. Unfortunately, this new hook does not have access to the inode
itself as it may already be released, so the existing
inode_free_security() hook is retained for those LSMs which require
access to the inode.
Cc: stable@vger.kernel.org
Reported-by: syzbot+5446fbf332b0602ede0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/00000000000076ba3b0617f65cc8@google.com
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Casey Schaufler <casey@schaufler-ca.com>
Date: Wed Jul 10 14:32:25 2024 -0700
lsm: infrastructure management of the sock security
[ Upstream commit 2aff9d20d50ac45dd13a013ef5231f4fb8912356 ]
Move management of the sock->sk_security blob out
of the individual security modules and into the security
infrastructure. Instead of allocating the blobs from within
the modules the modules tell the infrastructure how much
space is required, and the space is allocated there.
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stable-dep-of: 63dff3e48871 ("lsm: add the inode_free_security_rcu() LSM implementation hook")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Sun Aug 11 10:12:29 2024 +1000
m68k: Fix kernel_clone_args.flags in m68k_clone()
[ Upstream commit 09b3d870faa7bc3e96c0978ab3cf4e96e4b15571 ]
Stan Johnson recently reported a failure from the 'dump' command:
DUMP: Date of this level 0 dump: Fri Aug 9 23:37:15 2024
DUMP: Dumping /dev/sda (an unlisted file system) to /dev/null
DUMP: Label: none
DUMP: Writing 10 Kilobyte records
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [directories]
DUMP: estimated 3595695 blocks.
DUMP: Context save fork fails in parent 671
The dump program uses the clone syscall with the CLONE_IO flag, that is,
flags == 0x80000000. When that value is promoted from long int to u64 by
m68k_clone(), it undergoes sign-extension. The new value includes
CLONE_INTO_CGROUP so the validation in cgroup_css_set_fork() fails and
the syscall returns -EBADF. Avoid sign-extension by casting to u32.
Reported-by: Stan Johnson <userm57@yahoo.com>
Closes: https://lists.debian.org/debian-68k/2024/08/msg00000.html
Fixes: 6aabc1facdb2 ("m68k: Implement copy_thread_tls()")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/3463f1e5d4e95468dc9f3368f2b78ffa7b72199b.1723335149.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yu Kuai <yukuai3@huawei.com>
Date: Thu Aug 1 20:47:46 2024 +0800
md: Don't flush sync_work in md_write_start()
commit 86ad4cda79e0dade87d4bb0d32e1fe541d4a63e8 upstream.
Because flush sync_work may trigger mddev_suspend() if there are spares,
and this should never be done in IO path because mddev_suspend() is used
to wait for IO.
This problem is found by code review.
Fixes: bc08041b32ab ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240801124746.242558-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Thu Jun 13 17:33:55 2024 +0800
media: mediatek: vcodec: Fix H264 multi stateless decoder smatch warning
[ Upstream commit 9be85491619f1953b8a29590ca630be571941ffa ]
Fix a smatch static checker warning on vdec_h264_req_multi_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 397edc703a10 ("media: mediatek: vcodec: add h264 decoder driver for mt8186")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Thu Jun 13 17:33:57 2024 +0800
media: mediatek: vcodec: Fix H264 stateless decoder smatch warning
[ Upstream commit 7878d3a385efab560dce793b595447867fb163f2 ]
Fix a smatch static checker warning on vdec_h264_req_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 06fa5f757dc5 ("media: mtk-vcodec: vdec: support stateless H.264 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yunfei Dong <yunfei.dong@mediatek.com>
Date: Thu Jun 13 17:33:56 2024 +0800
media: mediatek: vcodec: Fix VP8 stateless decoder smatch warning
[ Upstream commit b113bc7c0e83b32f4dd2d291a2b6c4803e0a2c44 ]
Fix a smatch static checker warning on vdec_vp8_req_if.c.
Which leads to a kernel crash when fb is NULL.
Fixes: 7a7ae26fd458 ("media: mediatek: vcodec: support stateless VP8 decoding")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Biju Das <biju.das.jz@bp.renesas.com>
Date: Wed Jul 31 17:49:32 2024 +0100
media: platform: rzg2l-cru: rzg2l-csi2: Add missing MODULE_DEVICE_TABLE
[ Upstream commit 07668fb0f867388bfdac0b60dbf51a4ad789f8e7 ]
The rzg2l-csi2 driver can be compiled as a module, but lacks
MODULE_DEVICE_TABLE() and will therefore not be loaded automatically.
Fix this.
Fixes: 51e8415e39a9 ("media: platform: Add Renesas RZ/G2L MIPI CSI-2 receiver driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240731164935.308994-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Wed Apr 24 16:02:48 2024 +0200
media: staging: media: starfive: camss: Drop obsolete return value documentation
[ Upstream commit 044fcf738a56d915514e2d651333395b3f8daa62 ]
Recently the function stfcamss_remove() was changed to not return a
value. Drop the documentation of the return value in the kernel doc.
Fixes: b1f3677aebe5 ("media: staging: media: starfive: camss: Convert to platform remove callback returning void")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri Jul 26 15:09:07 2024 -0700
minmax: avoid overly complex min()/max() macro arguments in xen
[ Upstream commit e8432ac802a028eaee6b1e86383d7cd8e9fb8431 ]
We have some very fancy min/max macros that have tons of sanity checking
to warn about mixed signedness etc.
This is all things that a sane compiler should warn about, but there are
no sane compiler interfaces for this, and '-Wsign-compare' is broken [1]
and not useful.
So then we compensate (some would say over-compensate) by doing the
checks manually with some truly horrid macro games.
And no, we can't just use __builtin_types_compatible_p(), because the
whole question of "does it make sense to compare these two values" is a
lot more complicated than that.
For example, it makes a ton of sense to compare unsigned values with
simple constants like "5", even if that is indeed a signed type. So we
have these very strange macros to try to make sensible type checking
decisions on the arguments to 'min()' and 'max()'.
But that can cause enormous code expansion if the min()/max() macros are
used with complicated expressions, and particularly if you nest these
things so that you get the first big expansion then expanded again.
The xen setup.c file ended up ballooning to over 50MB of preprocessed
noise that takes 15s to compile (obviously depending on the build host),
largely due to one single line.
So let's split that one single line to just be simpler. I think it ends
up being more legible to humans too at the same time. Now that single
file compiles in under a second.
Reported-and-reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/all/c83c17bb-be75-4c67-979d-54eee38774c6@lucifer.local/
Link: https://staticthinking.wordpress.com/2023/07/25/wsign-compare-is-garbage/ [1]
Cc: David Laight <David.Laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: be35d91c8880 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Liam R. Howlett <Liam.Howlett@oracle.com>
Date: Wed Sep 4 17:12:04 2024 -0700
mm/damon/vaddr: protect vma traversal in __damon_va_thre_regions() with rcu read lock
commit fb497d6db7c19c797cbd694b52d1af87c4eebcc6 upstream.
Traversing VMAs of a given maple tree should be protected by rcu read
lock. However, __damon_va_three_regions() is not doing the protection.
Hold the lock.
Link: https://lkml.kernel.org/r/20240905001204.1481-1-sj@kernel.org
Fixes: d0cf3dd47f0d ("damon: convert __damon_va_three_regions to use the VMA iterator")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/b83651a0-5b24-4206-b860-cb54ffdf209b@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miaohe Lin <linmiaohe@huawei.com>
Date: Sat Sep 14 09:53:06 2024 +0800
mm/huge_memory: ensure huge_zero_folio won't have large_rmappable flag set
commit 2a1b8648d9be9f37f808a36c0f74adb8c53d06e6 upstream.
Ensure huge_zero_folio won't have large_rmappable flag set. So it can be
reported as thp,zero correctly through stable_page_flags().
Link: https://lkml.kernel.org/r/20240914015306.3656791-1-linmiaohe@huawei.com
Fixes: 5691753d73a2 ("mm: convert huge_zero_page to huge_zero_folio")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Date: Sat Sep 14 12:41:19 2024 -0700
mm/hugetlb.c: fix UAF of vma in hugetlb fault pathway
commit 98b74bb4d7e96b4da5ef3126511febe55b76b807 upstream.
Syzbot reports a UAF in hugetlb_fault(). This happens because
vmf_anon_prepare() could drop the per-VMA lock and allow the current VMA
to be freed before hugetlb_vma_unlock_read() is called.
We can fix this by using a modified version of vmf_anon_prepare() that
doesn't release the VMA lock on failure, and then release it ourselves
after hugetlb_vma_unlock_read().
Link: https://lkml.kernel.org/r/20240914194243.245-2-vishal.moola@gmail.com
Fixes: 9acad7ba3e25 ("hugetlb: use vmf_anon_prepare() instead of anon_vma_prepare()")
Reported-by: syzbot+2dab93857ee95f2eeb08@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yu Zhao <yuzhao@google.com>
Date: Mon Aug 12 16:48:23 2024 -0600
mm/hugetlb_vmemmap: batch HVO work when demoting
commit c0f398c3b2cf67976bca216f80668b9c93368385 upstream.
Batch the HVO work, including de-HVO of the source and HVO of the
destination hugeTLB folios, to speed up demotion.
After commit bd225530a4c7 ("mm/hugetlb_vmemmap: fix race with speculative
PFN walkers"), each request of HVO or de-HVO, batched or not, invokes
synchronize_rcu() once. For example, when not batched, demoting one 1GB
hugeTLB folio to 512 2MB hugeTLB folios invokes synchronize_rcu() 513
times (1 de-HVO plus 512 HVO requests), whereas when batched, only twice
(1 de-HVO plus 1 HVO request). And the performance difference between the
two cases is significant, e.g.,
echo 2048kB >/sys/kernel/mm/hugepages/hugepages-1048576kB/demote_size
time echo 100 >/sys/kernel/mm/hugepages/hugepages-1048576kB/demote
Before this patch:
real 8m58.158s
user 0m0.009s
sys 0m5.900s
After this patch:
real 0m0.900s
user 0m0.000s
sys 0m0.851s
Note that this patch changes the behavior of the `demote` interface when
de-HVO fails. Before, the interface aborts immediately upon failure; now,
it tries to finish an entire batch, meaning it can make extra progress if
the rest of the batch contains folios that do not need to de-HVO.
Link: https://lkml.kernel.org/r/20240812224823.3914837-1-yuzhao@google.com
Fixes: bd225530a4c7 ("mm/hugetlb_vmemmap: fix race with speculative PFN walkers")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shu Han <ebpqwerty472123@gmail.com>
Date: Tue Sep 17 17:41:04 2024 +0800
mm: call the security_mmap_file() LSM hook in remap_file_pages()
commit ea7e2d5e49c05e5db1922387b09ca74aa40f46e2 upstream.
The remap_file_pages syscall handler calls do_mmap() directly, which
doesn't contain the LSM security check. And if the process has called
personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for
RW pages, this will actually result in remapping the pages to RWX,
bypassing a W^X policy enforced by SELinux.
So we should check prot by security_mmap_file LSM hook in the
remap_file_pages syscall handler before do_mmap() is called. Otherwise, it
potentially permits an attacker to bypass a W^X policy enforced by
SELinux.
The bypass is similar to CVE-2016-10044, which bypass the same thing via
AIO and can be found in [1].
The PoC:
$ cat > test.c
int main(void) {
size_t pagesz = sysconf(_SC_PAGE_SIZE);
int mfd = syscall(SYS_memfd_create, "test", 0);
const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE,
MAP_SHARED, mfd, 0);
unsigned int old = syscall(SYS_personality, 0xffffffff);
syscall(SYS_personality, READ_IMPLIES_EXEC | old);
syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0);
syscall(SYS_personality, old);
// show the RWX page exists even if W^X policy is enforced
int fd = open("/proc/self/maps", O_RDONLY);
unsigned char buf2[1024];
while (1) {
int ret = read(fd, buf2, 1024);
if (ret <= 0) break;
write(1, buf2, ret);
}
close(fd);
}
$ gcc test.c -o test
$ ./test | grep rwx
7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted)
Link: https://project-zero.issues.chromium.org/issues/42452389 [1]
Cc: stable@vger.kernel.org
Signed-off-by: Shu Han <ebpqwerty472123@gmail.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Date: Sat Sep 14 12:41:18 2024 -0700
mm: change vmf_anon_prepare() to __vmf_anon_prepare()
commit 2a058ab3286d6475b2082b90c2d2182d2fea4b39 upstream.
Some callers of vmf_anon_prepare() may not want us to release the per-VMA
lock ourselves. Rename vmf_anon_prepare() to __vmf_anon_prepare() and let
the callers drop the lock when desired.
Also, make vmf_anon_prepare() a wrapper that releases the per-VMA lock
itself for any callers that don't care.
This is in preparation to fix this bug reported by syzbot:
https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/
Link: https://lkml.kernel.org/r/20240914194243.245-1-vishal.moola@gmail.com
Fixes: 9acad7ba3e25 ("hugetlb: use vmf_anon_prepare() instead of anon_vma_prepare()")
Reported-by: syzbot+2dab93857ee95f2eeb08@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000067c20b06219fbc26@google.com/
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeongjun Park <aha310510@gmail.com>
Date: Tue Sep 24 22:00:53 2024 +0900
mm: migrate: annotate data-race in migrate_folio_unmap()
commit 8001070cfbec5cd4ea00b8b48ea51df91122f265 upstream.
I found a report from syzbot [1]
This report shows that the value can be changed, but in reality, the
value of __folio_set_movable() cannot be changed because it holds the
folio refcount.
Therefore, it is appropriate to add an annotate to make KCSAN
ignore that data-race.
[1]
==================================================================
BUG: KCSAN: data-race in __filemap_remove_folio / migrate_pages_batch
write to 0xffffea0004b81dd8 of 8 bytes by task 6348 on cpu 0:
page_cache_delete mm/filemap.c:153 [inline]
__filemap_remove_folio+0x1ac/0x2c0 mm/filemap.c:233
filemap_remove_folio+0x6b/0x1f0 mm/filemap.c:265
truncate_inode_folio+0x42/0x50 mm/truncate.c:178
shmem_undo_range+0x25b/0xa70 mm/shmem.c:1028
shmem_truncate_range mm/shmem.c:1144 [inline]
shmem_evict_inode+0x14d/0x530 mm/shmem.c:1272
evict+0x2f0/0x580 fs/inode.c:731
iput_final fs/inode.c:1883 [inline]
iput+0x42a/0x5b0 fs/inode.c:1909
dentry_unlink_inode+0x24f/0x260 fs/dcache.c:412
__dentry_kill+0x18b/0x4c0 fs/dcache.c:615
dput+0x5c/0xd0 fs/dcache.c:857
__fput+0x3fb/0x6d0 fs/file_table.c:439
____fput+0x1c/0x30 fs/file_table.c:459
task_work_run+0x13a/0x1a0 kernel/task_work.c:228
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xbe/0x130 kernel/entry/common.c:218
do_syscall_64+0xd6/0x1c0 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffffea0004b81dd8 of 8 bytes by task 6342 on cpu 1:
__folio_test_movable include/linux/page-flags.h:699 [inline]
migrate_folio_unmap mm/migrate.c:1199 [inline]
migrate_pages_batch+0x24c/0x1940 mm/migrate.c:1797
migrate_pages_sync mm/migrate.c:1963 [inline]
migrate_pages+0xff1/0x1820 mm/migrate.c:2072
do_mbind mm/mempolicy.c:1390 [inline]
kernel_mbind mm/mempolicy.c:1533 [inline]
__do_sys_mbind mm/mempolicy.c:1607 [inline]
__se_sys_mbind+0xf76/0x1160 mm/mempolicy.c:1603
__x64_sys_mbind+0x78/0x90 mm/mempolicy.c:1603
x64_sys_call+0x2b4d/0x2d60 arch/x86/include/generated/asm/syscalls_64.h:238
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xc9/0x1c0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0xffff888127601078 -> 0x0000000000000000
Link: https://lkml.kernel.org/r/20240924130053.107490-1-aha310510@gmail.com
Fixes: 7e2a5e5ab217 ("mm: migrate: use __folio_test_movable()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: David Gow <davidgow@google.com>
Date: Sat Aug 3 15:46:41 2024 +0800
mm: only enforce minimum stack gap size if it's sensible
commit 69b50d4351ed924f29e3d46b159e28f70dfc707f upstream.
The generic mmap_base code tries to leave a gap between the top of the
stack and the mmap base address, but enforces a minimum gap size (MIN_GAP)
of 128MB, which is too large on some setups. In particular, on arm tasks
without ADDR_LIMIT_32BIT, the STACK_TOP value is less than 128MB, so it's
impossible to fit such a gap in.
Only enforce this minimum if MIN_GAP < MAX_GAP, as we'd prefer to honour
MAX_GAP, which is defined proportionally, so scales better and always
leaves us with both _some_ stack space and some room for mmap.
This fixes the usercopy KUnit test suite on 32-bit arm, as it doesn't set
any personality flags so gets the default (in this case 26-bit) task size.
This test can be run with: ./tools/testing/kunit/kunit.py run --arch arm
usercopy --make_options LLVM=1
Link: https://lkml.kernel.org/r/20240803074642.1849623-2-davidgow@google.com
Fixes: dba79c3df4a2 ("arm: use generic mmap top-down layout and brk randomization")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Vyukov <dvyukov@google.com>
Date: Tue Jun 11 09:50:32 2024 +0200
module: Fix KCOV-ignored file name
commit f34d086fb7102fec895fd58b9e816b981b284c17 upstream.
module.c was renamed to main.c, but the Makefile directive was copy-pasted
verbatim with the old file name. Fix up the file name.
Fixes: cfc1d277891e ("module: Move all into module/")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/bc0cf790b4839c5e38e2fafc64271f620568a39e.1718092070.git.dvyukov@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Olaf Hering <olaf@aepfle.de>
Date: Tue Jul 30 10:58:13 2024 +0200
mount: handle OOM on mnt_warn_timestamp_expiry
[ Upstream commit 4bcda1eaf184e308f07f9c61d3a535f9ce477ce8 ]
If no page could be allocated, an error pointer was used as format
string in pr_warn.
Rearrange the code to return early in case of OOM. Also add a check
for the return value of d_path.
Fixes: f8b92ba67c5d ("mount: Add mount warning for impending timestamp expiry")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20240730085856.32385-1-olaf@aepfle.de
[brauner: rewrite commit and commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Han <hanchunchao@inspur.com>
Date: Wed Aug 28 17:24:27 2024 +0800
mtd: powernv: Add check devm_kasprintf() returned value
[ Upstream commit 395999829880a106bb95f0ce34e6e4c2b43c6a5d ]
devm_kasprintf() can return a NULL pointer on failure but this
returned value is not checked.
Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Mon Aug 26 17:30:18 2024 +0200
mtd: rawnand: mtk: Factorize out the logic cleaning mtk chips
[ Upstream commit 81cb3be3261e766a1f8efab9e3154a4f4fd9d03d ]
There are some un-freed resources in one of the error path which would
benefit from a helper going through all the registered mtk chips one by
one and perform all the necessary cleanup. This is precisely what the
remove path does, so let's extract the logic in a helper.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20240826153019.67106-1-miquel.raynal@bootlin.com
Stable-dep-of: 2073ae37d550 ("mtd: rawnand: mtk: Fix init error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miquel Raynal <miquel.raynal@bootlin.com>
Date: Mon Aug 26 17:30:19 2024 +0200
mtd: rawnand: mtk: Fix init error path
[ Upstream commit 2073ae37d550ea32e8545edaa94ef10b4fef7235 ]
Reviewing a series converting the for_each_chil_of_node() loops into
their _scoped variants made me realize there was no cleanup of the
already registered NAND devices upon error which may leak memory on
systems with more than a chip when this error occurs. We should call the
_nand_chips_cleanup() function when this happens.
Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@kernel.org>
Link: https://lore.kernel.org/linux-mtd/20240826153019.67106-2-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Mon Aug 26 17:43:25 2024 +0800
mtd: rawnand: mtk: Use for_each_child_of_node_scoped()
[ Upstream commit 8795952679494b111b7b2ba08bb54ac408daca3b ]
Avoids the need for manual cleanup of_node_put() in early exits
from the loop.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240826094328.2991664-8-ruanjinjie@huawei.com
Stable-dep-of: 2073ae37d550 ("mtd: rawnand: mtk: Fix init error path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mirsad Todorovac <mtodorovac69@gmail.com>
Date: Fri Jul 12 01:43:20 2024 +0200
mtd: slram: insert break after errors in parsing the map
[ Upstream commit 336c218dd7f0588ed8a7345f367975a00a4f003f ]
GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution
path in which, due to lazy evaluation, devlength isn't initialised with the
parsed string:
289 while (map) {
290 devname = devstart = devlength = NULL;
291
292 if (!(devname = strsep(&map, ","))) {
293 E("slram: No devicename specified.\n");
294 break;
295 }
296 T("slram: devname = %s\n", devname);
297 if ((!map) || (!(devstart = strsep(&map, ",")))) {
298 E("slram: No devicestart specified.\n");
299 }
300 T("slram: devstart = %s\n", devstart);
→ 301 if ((!map) || (!(devlength = strsep(&map, ",")))) {
302 E("slram: No devicelength / -end specified.\n");
303 }
→ 304 T("slram: devlength = %s\n", devlength);
305 if (parse_cmdline(devname, devstart, devlength) != 0) {
306 return(-EINVAL);
307 }
Parsing should be finished after map == NULL, so a break is best inserted after
each E("slram: ... \n") error message.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240711234319.637824-1-mtodorovac69@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wouter Verhelst <w@uter.be>
Date: Mon Aug 12 15:20:42 2024 +0200
nbd: correct the maximum value for discard sectors
[ Upstream commit 296dbc72d29085d5fc34430d0760423071e9e81d ]
The version of the NBD protocol implemented by the kernel driver
currently has a 32 bit field for length values. As the NBD protocol uses
bytes as a unit of length, length values larger than 2^32 bytes cannot
be expressed.
Update the max_hw_discard_sectors field to match that.
Signed-off-by: Wouter Verhelst <w@uter.be>
Fixes: 268283244c0f ("nbd: use the atomic queue limits API in nbd_set_size")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Eric Blake <eblake@redhat.Com>
Link: https://lore.kernel.org/r/20240812133032.115134-8-w@uter.be
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ming Lei <ming.lei@redhat.com>
Date: Fri Aug 30 11:41:45 2024 +0800
nbd: fix race between timeout and normal completion
[ Upstream commit c9ea57c91f03bcad415e1a20113bdb2077bcf990 ]
If request timetout is handled by nbd_requeue_cmd(), normal completion
has to be stopped for avoiding to complete this requeued request, other
use-after-free can be triggered.
Fix the race by clearing NBD_CMD_INFLIGHT in nbd_requeue_cmd(), meantime
make sure that cmd->lock is grabbed for clearing the flag and the
requeue.
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Fixes: 2895f1831e91 ("nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240830034145.1827742-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Wed Sep 11 17:44:44 2024 +0800
net: enetc: Use IRQF_NO_AUTOEN flag in request_irq()
[ Upstream commit 799a9225997799f7b1b579bc50a93b78b4fb2a01 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: bbb96dc7fa1a ("enetc: Factor out the traffic start/stop procedures")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240911094445.1922476-3-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Fri Sep 6 15:25:31 2024 +0200
net: hsr: Use the seqnr lock for frames received via interlink port.
[ Upstream commit 430d67bdcb04ee8502c2b10dcbaced4253649189 ]
syzbot reported that the seqnr_lock is not acquire for frames received
over the interlink port. In the interlink case a new seqnr is generated
and assigned to the frame.
Frames, which are received over the slave port have already a sequence
number assigned so the lock is not required.
Acquire the hsr_priv::seqnr_lock during in the invocation of
hsr_forward_skb() if a packet has been received from the interlink port.
Reported-by: syzbot+3d602af7549af539274e@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/KppVvGviGg4/m/EItSdCZdBAAJ
Fixes: 5055cccfc2d1c ("net: hsr: Provide RedBox support (HSR-SAN)")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Lukasz Majewski <lukma@denx.de>
Link: https://patch.msgid.link/20240906132816.657485-2-bigeasy@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Wed Sep 11 19:45:57 2024 +0200
net: ipv6: rpl_iptunnel: Fix memory leak in rpl_input
[ Upstream commit 2c84b0aa28b9e73e8c4b4ce038269469434ae372 ]
Free the skb before returning from rpl_input when skb_cow_head() fails.
Use a "drop" label and goto instructions.
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240911174557.11536-1-justin.iurman@uliege.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Date: Mon Sep 16 20:57:13 2024 +0200
net: ipv6: select DST_CACHE from IPV6_RPL_LWTUNNEL
[ Upstream commit 93c21077bb9ba08807c459982d440dbbee4c7af3 ]
The rpl sr tunnel code contains calls to dst_cache_*() which are
only present when the dst cache is built.
Select DST_CACHE to build the dst cache, similar to other kconfig
options in the same file.
Compiling the rpl sr tunnel without DST_CACHE will lead to linker
errors.
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Youssef Samir <quic_yabdulra@quicinc.com>
Date: Mon Sep 16 19:08:58 2024 +0200
net: qrtr: Update packets cloning when broadcasting
[ Upstream commit f011b313e8ebd5b7abd8521b5119aecef403de45 ]
When broadcasting data to multiple nodes via MHI, using skb_clone()
causes all nodes to receive the same header data. This can result in
packets being discarded by endpoints, leading to lost data.
This issue occurs when a socket is closed, and a QRTR_TYPE_DEL_CLIENT
packet is broadcasted. All nodes receive the same destination node ID,
causing the node connected to the client to discard the packet and
remain unaware of the client's deletion.
Replace skb_clone() with pskb_copy(), to create a separate copy of
the header for each sk_buff.
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
Reviewed-by: Jeffery Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://patch.msgid.link/20240916170858.2382247-1-quic_yabdulra@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Paul Barker <paul.barker.ct@bp.renesas.com>
Date: Wed Sep 18 09:18:39 2024 +0100
net: ravb: Fix R-Car RX frame size limit
[ Upstream commit ec8234717db8589078d08b17efa528a235c61f4f ]
The RX frame size limit should not be based on the current MTU setting.
Instead it should be based on the hardware capabilities.
While we're here, improve the description of the receive frame length
setting as suggested by Niklas.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Date: Sun Sep 15 22:40:46 2024 +0800
net: seeq: Fix use after free vulnerability in ether3 Driver Due to Race Condition
[ Upstream commit b5109b60ee4fcb2f2bb24f589575e10cc5283ad4 ]
In the ether3_probe function, a timer is initialized with a callback
function ether3_ledoff, bound to &prev(dev)->timer. Once the timer is
started, there is a risk of a race condition if the module or device
is removed, triggering the ether3_remove function to perform cleanup.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| ether3_ledoff
ether3_remove |
free_netdev(dev); |
put_devic |
kfree(dev); |
| ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2);
| // use dev
Fix it by ensuring that the timer is canceled before proceeding with
the cleanup in ether3_remove.
Fixes: 6fd9c53f7186 ("net: seeq: Convert timers to use timer_setup()")
Signed-off-by: Kaixin Wang <kxwang23@m.fudan.edu.cn>
Link: https://patch.msgid.link/20240915144045.451-1-kxwang23@m.fudan.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yanteng Si <siyanteng@loongson.cn>
Date: Wed Aug 7 21:48:02 2024 +0800
net: stmmac: dwmac-loongson: Init ref and PTP clocks rate
[ Upstream commit c70f3163681381c15686bdd2fe56bf4af9b8aaaa ]
Reference and PTP clocks rate of the Loongson GMAC devices is 125MHz.
(So is in the GNET devices which support is about to be added.) Set
the respective plat_stmmacenet_data field up in accordance with that
so to have the coalesce command and timestamping work correctly.
Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Furong Xu <0x1207@gmail.com>
Date: Thu Sep 19 20:10:28 2024 +0800
net: stmmac: set PP_FLAG_DMA_SYNC_DEV only if XDP is enabled
[ Upstream commit b514c47ebf41a6536551ed28a05758036e6eca7c ]
Commit 5fabb01207a2 ("net: stmmac: Add initial XDP support") sets
PP_FLAG_DMA_SYNC_DEV flag for page_pool unconditionally,
page_pool_recycle_direct() will call page_pool_dma_sync_for_device()
on every page even the page is not going to be reused by XDP program.
When XDP is not enabled, the page which holds the received buffer
will be recycled once the buffer is copied into new SKB by
skb_copy_to_linear_data(), then the MAC core will never reuse this
page any longer. Always setting PP_FLAG_DMA_SYNC_DEV wastes CPU cycles
on unnecessary calling of page_pool_dma_sync_for_device().
After this patch, up to 9% noticeable performance improvement was observed
on certain platforms.
Fixes: 5fabb01207a2 ("net: stmmac: Add initial XDP support")
Signed-off-by: Furong Xu <0x1207@gmail.com>
Link: https://patch.msgid.link/20240919121028.1348023-1-0x1207@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Su Hui <suhui@nfschina.com>
Date: Thu Sep 12 19:01:20 2024 +0800
net: tipc: avoid possible garbage value
[ Upstream commit 99655a304e450baaae6b396cb942b9e47659d644 ]
Clang static checker (scan-build) warning:
net/tipc/bcast.c:305:4:
The expression is an uninitialized value. The computed value will also
be garbage [core.uninitialized.Assign]
305 | (*cong_link_cnt)++;
| ^~~~~~~~~~~~~~~~~~
tipc_rcast_xmit() will increase cong_link_cnt's value, but cong_link_cnt
is uninitialized. Although it won't really cause a problem, it's better
to fix it.
Fixes: dca4a17d24ee ("tipc: fix potential hanging after b/rcast changing")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://patch.msgid.link/20240912110119.2025503-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Fri Sep 13 10:51:56 2024 -0400
net: xilinx: axienet: Fix packet counting
[ Upstream commit 5a6caa2cfabb559309b5ce29ee7c8e9ce1a9a9df ]
axienet_free_tx_chain returns the number of DMA descriptors it's
handled. However, axienet_tx_poll treats the return as the number of
packets. When scatter-gather SKBs are enabled, a single packet may use
multiple DMA descriptors, which causes incorrect packet counts. Fix this
by explicitly keepting track of the number of packets processed as
separate from the DMA descriptors.
Budget does not affect the number of Tx completions we can process for
NAPI, so we use the ring size as the limit instead of budget. As we no
longer return the number of descriptors processed to axienet_tx_poll, we
now update tx_bd_ci in axienet_free_tx_chain.
Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240913145156.2283067-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Fri Sep 13 10:57:11 2024 -0400
net: xilinx: axienet: Schedule NAPI in two steps
[ Upstream commit ba0da2dc934ec5ac32bbeecbd0670da16ba03565 ]
As advised by Documentation/networking/napi.rst, masking IRQs after
calling napi_schedule can be racy. Avoid this by only masking/scheduling
if napi_schedule_prep returns true.
Fixes: 9e2bc267e780 ("net: axienet: Use NAPI for TX completion path")
Fixes: cc37610caaf8 ("net: axienet: implement NAPI and GRO receive")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240913145711.2284295-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Simon Horman <horms@kernel.org>
Date: Mon Sep 16 16:14:41 2024 +0100
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
[ Upstream commit e1f1ee0e9ad8cbe660f5c104e791c5f1a7cf4c31 ]
Only provide ctnetlink_label_size when it is used,
which is when CONFIG_NF_CONNTRACK_EVENTS is configured.
Flagged by clang-18 W=1 builds as:
.../nf_conntrack_netlink.c:385:19: warning: unused function 'ctnetlink_label_size' [-Wunused-function]
385 | static inline int ctnetlink_label_size(const struct nf_conn *ct)
| ^~~~~~~~~~~~~~~~~~~~
The condition on CONFIG_NF_CONNTRACK_LABELS being removed by
this patch guards compilation of non-trivial implementations
of ctnetlink_dump_labels() and ctnetlink_label_size().
However, this is not necessary as each of these functions
will always return 0 if CONFIG_NF_CONNTRACK_LABELS is not defined
as each function starts with the equivalent of:
struct nf_conn_labels *labels = nf_ct_labels_find(ct);
if (!labels)
return 0;
And nf_ct_labels_find always returns NULL if CONFIG_NF_CONNTRACK_LABELS
is not enabled. So I believe that the compiler optimises the code away
in such cases anyway.
Found by inspection.
Compile tested only.
Originally splitted in two patches, Pablo Neira Ayuso collapsed them and
added Fixes: tag.
Fixes: 0ceabd83875b ("netfilter: ctnetlink: deliver labels to userspace")
Link: https://lore.kernel.org/netfilter-devel/20240909151712.GZ2097826@kernel.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Sep 13 17:06:15 2024 +0000
netfilter: nf_reject_ipv6: fix nf_reject_ip6_tcphdr_put()
[ Upstream commit 9c778fe48d20ef362047e3376dee56d77f8500d4 ]
syzbot reported that nf_reject_ip6_tcphdr_put() was possibly sending
garbage on the four reserved tcp bits (th->res1)
Use skb_put_zero() to clear the whole TCP header,
as done in nf_reject_ip_tcphdr_put()
BUG: KMSAN: uninit-value in nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_reject_ip6_tcphdr_put+0x688/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:255
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
do_softirq+0x9a/0x100 kernel/softirq.c:455
__local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline]
__dev_queue_xmit+0x2692/0x5610 net/core/dev.c:4450
dev_queue_xmit include/linux/netdevice.h:3105 [inline]
neigh_resolve_output+0x9ca/0xae0 net/core/neighbour.c:1565
neigh_output include/net/neighbour.h:542 [inline]
ip6_finish_output2+0x2347/0x2ba0 net/ipv6/ip6_output.c:141
__ip6_finish_output net/ipv6/ip6_output.c:215 [inline]
ip6_finish_output+0xbb8/0x14b0 net/ipv6/ip6_output.c:226
NF_HOOK_COND include/linux/netfilter.h:303 [inline]
ip6_output+0x356/0x620 net/ipv6/ip6_output.c:247
dst_output include/net/dst.h:450 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0x1ba6/0x25d0 net/ipv6/ip6_output.c:366
inet6_csk_xmit+0x442/0x530 net/ipv6/inet6_connection_sock.c:135
__tcp_transmit_skb+0x3b07/0x4880 net/ipv4/tcp_output.c:1466
tcp_transmit_skb net/ipv4/tcp_output.c:1484 [inline]
tcp_connect+0x35b6/0x7130 net/ipv4/tcp_output.c:4143
tcp_v6_connect+0x1bcc/0x1e40 net/ipv6/tcp_ipv6.c:333
__inet_stream_connect+0x2ef/0x1730 net/ipv4/af_inet.c:679
inet_stream_connect+0x6a/0xd0 net/ipv4/af_inet.c:750
__sys_connect_file net/socket.c:2061 [inline]
__sys_connect+0x606/0x690 net/socket.c:2078
__do_sys_connect net/socket.c:2088 [inline]
__se_sys_connect net/socket.c:2085 [inline]
__x64_sys_connect+0x91/0xe0 net/socket.c:2085
x64_sys_call+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls_64.h:43
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was stored to memory at:
nf_reject_ip6_tcphdr_put+0x60c/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:249
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
Uninit was stored to memory at:
nf_reject_ip6_tcphdr_put+0x2ca/0x6c0 net/ipv6/netfilter/nf_reject_ipv6.c:231
nf_send_reset6+0xd84/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:344
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3998 [inline]
slab_alloc_node mm/slub.c:4041 [inline]
kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4084
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583
__alloc_skb+0x363/0x7b0 net/core/skbuff.c:674
alloc_skb include/linux/skbuff.h:1320 [inline]
nf_send_reset6+0x98d/0x15b0 net/ipv6/netfilter/nf_reject_ipv6.c:327
nft_reject_inet_eval+0x3c1/0x880 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x438/0x22a0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x41a/0x4f0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
ipv6_rcv+0x29b/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5661 [inline]
__netif_receive_skb+0x1da/0xa00 net/core/dev.c:5775
process_backlog+0x4ad/0xa50 net/core/dev.c:6108
__napi_poll+0xe7/0x980 net/core/dev.c:6772
napi_poll net/core/dev.c:6841 [inline]
net_rx_action+0xa5a/0x19b0 net/core/dev.c:6963
handle_softirqs+0x1ce/0x800 kernel/softirq.c:554
__do_softirq+0x14/0x1a kernel/softirq.c:588
Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20240913170615.3670897-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Sep 3 01:06:41 2024 +0200
netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire
[ Upstream commit e0c47281723f301894c14e6f5cd5884fdfb813f9 ]
Element timeout that is below CONFIG_HZ never expires because the
timeout extension is not allocated given that nf_msecs_to_jiffies64()
returns 0. Set timeout to the minimum value to honor timeout.
Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Phil Sutter <phil@nwl.cc>
Date: Thu Sep 12 14:21:33 2024 +0200
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
[ Upstream commit 642c89c475419b4d0c0d90e29d9c1a0e4351f379 ]
Documentation of list_del_rcu() warns callers to not immediately free
the deleted list item. While it seems not necessary to use the
RCU-variant of list_del() here in the first place, doing so seems to
require calling kfree_rcu() on the deleted item as well.
Fixes: 3f0465a9ef02 ("netfilter: nf_tables: dynamically allocate hooks per net_device in flowtables")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Wed Sep 18 14:19:45 2024 +0200
netfilter: nf_tables: missing objects with no memcg accounting
[ Upstream commit 69e687cea79fc99a17dfb0116c8644b9391b915e ]
Several ruleset objects are still not using GFP_KERNEL_ACCOUNT for
memory accounting, update them. This includes:
- catchall elements
- compat match large info area
- log prefix
- meta secctx
- numgen counters
- pipapo set backend datastructure
- tunnel private objects
Fixes: 33758c891479 ("memcg: enable accounting for nft objects")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Sep 3 01:06:49 2024 +0200
netfilter: nf_tables: reject element expiration with no timeout
[ Upstream commit d2dc429ecb4e79ad164028d965c00f689e6f6d06 ]
If element timeout is unset and set provides no default timeout, the
element expiration is silently ignored, reject this instead to let user
know this is unsupported.
Also prepare for supporting timeout that never expire, where zero
timeout and expiration must be also rejected.
Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Sep 3 01:06:58 2024 +0200
netfilter: nf_tables: reject expiration higher than timeout
[ Upstream commit c0f38a8c60174368aed1d0f9965d733195f15033 ]
Report ERANGE to userspace if user specifies an expiration larger than
the timeout.
Fixes: 8e1102d5a159 ("netfilter: nf_tables: support timeouts larger than 23 days")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Sep 3 01:07:06 2024 +0200
netfilter: nf_tables: remove annotation to access set timeout while holding lock
[ Upstream commit 15d8605c0cf4fc9cf4386cae658c68a0fd4bdb92 ]
Mutex is held when adding an element, no need for READ_ONCE, remove it.
Fixes: 123b99619cca ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Sep 17 23:07:46 2024 +0200
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
[ Upstream commit 4ffcf5ca81c3b83180473eb0d3c010a1a7c6c4de ]
Lockless iteration over hook list is possible from netlink dump path,
use rcu variant to iterate over the hook list as is done with flowtable
hooks.
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Reported-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Tue Sep 3 01:08:49 2024 +0200
netfilter: nft_dynset: annotate data-races around set timeout
[ Upstream commit c5ad8ed61fa8410b272c077ec167c593602b4542 ]
set timeout can be read locklessly while being updated from control
plane, add annotation.
Fixes: 123b99619cca ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baokun Li <libaokun1@huawei.com>
Date: Mon Aug 26 19:34:04 2024 +0800
netfs: Delete subtree of 'fs/netfs' when netfs module exits
commit 3c58a9575e02c2b90a3180007d57105ceaa7c246 upstream.
In netfs_init() or fscache_proc_init(), we create dentry under 'fs/netfs',
but in netfs_exit(), we only delete the proc entry of 'fs/netfs' without
deleting its subtree. This triggers the following WARNING:
==================================================================
remove_proc_entry: removing non-empty directory 'fs/netfs', leaking at least 'requests'
WARNING: CPU: 4 PID: 566 at fs/proc/generic.c:717 remove_proc_entry+0x160/0x1c0
Modules linked in: netfs(-)
CPU: 4 UID: 0 PID: 566 Comm: rmmod Not tainted 6.11.0-rc3 #860
RIP: 0010:remove_proc_entry+0x160/0x1c0
Call Trace:
<TASK>
netfs_exit+0x12/0x620 [netfs]
__do_sys_delete_module.isra.0+0x14c/0x2e0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
==================================================================
Therefore use remove_proc_subtree() instead of remove_proc_entry() to
fix the above problem.
Fixes: 7eb5b3e3a0a5 ("netfs, fscache: Move /proc/fs/fscache to /proc/fs/netfs and put in a symlink")
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240826113404.3214786-1-libaokun@huaweicloud.com
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Wed Sep 4 20:34:57 2024 +0800
nfs: fix memory leak in error path of nfs4_do_reclaim
commit 8f6a7c9467eaf39da4c14e5474e46190ab3fb529 upstream.
Commit c77e22834ae9 ("NFSv4: Fix a potential sleep while atomic in
nfs4_do_reclaim()") separate out the freeing of the state owners from
nfs4_purge_state_owners() and finish it outside the rcu lock.
However, the error path is omitted. As a result, the state owners in
"freeme" will not be released.
Fix it by adding freeing in the error path.
Fixes: c77e22834ae9 ("NFSv4: Fix a potential sleep while atomic in nfs4_do_reclaim()")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guoqing Jiang <guoqing.jiang@linux.dev>
Date: Wed Aug 21 22:03:18 2024 +0800
nfsd: call cache_put if xdr_reserve_space returns NULL
[ Upstream commit d078cbf5c38de83bc31f83c47dcd2184c04a50c7 ]
If not enough buffer space available, but idmap_lookup has triggered
lookup_fn which calls cache_get and returns successfully. Then we
missed to call cache_put here which pairs with cache_get.
Fixes: ddd1ea563672 ("nfsd4: use xdr_reserve_space in attribute encoding")
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviwed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeff Layton <jlayton@kernel.org>
Date: Mon Sep 9 10:40:53 2024 -0400
nfsd: fix initial getattr on write delegation
[ Upstream commit bf92e5008b17f935a6de8b708551e02c2294121c ]
At this point in compound processing, currentfh refers to the parent of
the file, not the file itself. Get the correct dentry from the delegation
stateid instead.
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeff Layton <jlayton@kernel.org>
Date: Wed Jul 10 09:05:32 2024 -0400
nfsd: fix refcount leak when file is unhashed after being found
[ Upstream commit 8a7926176378460e0d91e02b03f0ff20a8709a60 ]
If we wait_for_construction and find that the file is no longer hashed,
and we're going to retry the open, the old nfsd_file reference is
currently leaked. Put the reference before retrying.
Fixes: c6593366c0bf ("nfsd: don't kill nfsd_files because of lease break error")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Youzhong Yang <youzhong@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jeff Layton <jlayton@kernel.org>
Date: Thu Jul 11 15:11:13 2024 -0400
nfsd: remove unneeded EEXIST error check in nfsd_do_file_acquire
[ Upstream commit 81a95c2b1d605743220f28db04b8da13a65c4059 ]
Given that we do the search and insertion while holding the i_lock, I
don't think it's possible for us to get EEXIST here. Remove this case.
Fixes: c6593366c0bf ("nfsd: don't kill nfsd_files because of lease break error")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Youzhong Yang <youzhong@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Tue Sep 3 19:14:46 2024 +0800
nfsd: return -EINVAL when namelen is 0
[ Upstream commit 22451a16b7ab7debefce660672566be887db1637 ]
When we have a corrupted main.sqlite in /var/lib/nfs/nfsdcld/, it may
result in namelen being 0, which will cause memdup_user() to return
ZERO_SIZE_PTR.
When we access the name.data that has been assigned the value of
ZERO_SIZE_PTR in nfs4_client_to_reclaim(), null pointer dereference is
triggered.
[ T1205] ==================================================================
[ T1205] BUG: KASAN: null-ptr-deref in nfs4_client_to_reclaim+0xe9/0x260
[ T1205] Read of size 1 at addr 0000000000000010 by task nfsdcld/1205
[ T1205]
[ T1205] CPU: 11 PID: 1205 Comm: nfsdcld Not tainted 5.10.0-00003-g2c1423731b8d #406
[ T1205] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014
[ T1205] Call Trace:
[ T1205] dump_stack+0x9a/0xd0
[ T1205] ? nfs4_client_to_reclaim+0xe9/0x260
[ T1205] __kasan_report.cold+0x34/0x84
[ T1205] ? nfs4_client_to_reclaim+0xe9/0x260
[ T1205] kasan_report+0x3a/0x50
[ T1205] nfs4_client_to_reclaim+0xe9/0x260
[ T1205] ? nfsd4_release_lockowner+0x410/0x410
[ T1205] cld_pipe_downcall+0x5ca/0x760
[ T1205] ? nfsd4_cld_tracking_exit+0x1d0/0x1d0
[ T1205] ? down_write_killable_nested+0x170/0x170
[ T1205] ? avc_policy_seqno+0x28/0x40
[ T1205] ? selinux_file_permission+0x1b4/0x1e0
[ T1205] rpc_pipe_write+0x84/0xb0
[ T1205] vfs_write+0x143/0x520
[ T1205] ksys_write+0xc9/0x170
[ T1205] ? __ia32_sys_read+0x50/0x50
[ T1205] ? ktime_get_coarse_real_ts64+0xfe/0x110
[ T1205] ? ktime_get_coarse_real_ts64+0xa2/0x110
[ T1205] do_syscall_64+0x33/0x40
[ T1205] entry_SYSCALL_64_after_hwframe+0x67/0xd1
[ T1205] RIP: 0033:0x7fdbdb761bc7
[ T1205] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 514
[ T1205] RSP: 002b:00007fff8c4b7248 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ T1205] RAX: ffffffffffffffda RBX: 000000000000042b RCX: 00007fdbdb761bc7
[ T1205] RDX: 000000000000042b RSI: 00007fff8c4b75f0 RDI: 0000000000000008
[ T1205] RBP: 00007fdbdb761bb0 R08: 0000000000000000 R09: 0000000000000001
[ T1205] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000042b
[ T1205] R13: 0000000000000008 R14: 00007fff8c4b75f0 R15: 0000000000000000
[ T1205] ==================================================================
Fix it by checking namelen.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 74725959c33c ("nfsd: un-deprecate nfsdcld")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Scott Mayhew <smayhew@redhat.com>
Tested-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: NeilBrown <neilb@suse.de>
Date: Thu Aug 29 09:26:40 2024 -0400
nfsd: untangle code in nfsd4_deleg_getattr_conflict()
[ Upstream commit a078a7dc0eaa9db288ae45319f7f7503968af546 ]
The code in nfsd4_deleg_getattr_conflict() is convoluted and buggy.
With this patch we:
- properly handle non-nfsd leases. We must not assume flc_owner is a
delegation unless fl_lmops == &nfsd_lease_mng_ops
- move the main code out of the for loop
- have a single exit which calls nfs4_put_stid()
(and other exits which don't need to call that)
[ jlayton: refactored on top of Neil's other patch: nfsd: fix
nfsd4_deleg_getattr_conflict in presence of third party lease ]
Fixes: c5967721e106 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Wed Sep 4 17:13:08 2024 +0900
nilfs2: determine empty node blocks as corrupted
[ Upstream commit 111b812d3662f3a1b831d19208f83aa711583fe6 ]
Due to the nature of b-trees, nilfs2 itself and admin tools such as
mkfs.nilfs2 will never create an intermediate b-tree node block with 0
child nodes, nor will they delete (key, pointer)-entries that would result
in such a state. However, it is possible that a b-tree node block is
corrupted on the backing device and is read with 0 child nodes.
Because operation is not guaranteed if the number of child nodes is 0 for
intermediate node blocks other than the root node, modify
nilfs_btree_node_broken(), which performs sanity checks when reading a
b-tree node block, so that such cases will be judged as metadata
corruption.
Link: https://lkml.kernel.org/r/20240904081401.16682-3-konishi.ryusuke@gmail.com
Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Wed Sep 4 17:13:07 2024 +0900
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
[ Upstream commit 9403001ad65ae4f4c5de368bdda3a0636b51d51a ]
Patch series "nilfs2: fix potential issues with empty b-tree nodes".
This series addresses three potential issues with empty b-tree nodes that
can occur with corrupted filesystem images, including one recently
discovered by syzbot.
This patch (of 3):
If a b-tree is broken on the device, and the b-tree height is greater than
2 (the level of the root node is greater than 1) even if the number of
child nodes of the b-tree root is 0, a NULL pointer dereference occurs in
nilfs_btree_prepare_insert(), which is called from nilfs_btree_insert().
This is because, when the number of child nodes of the b-tree root is 0,
nilfs_btree_do_lookup() does not set the block buffer head in any of
path[x].bp_bh, leaving it as the initial value of NULL, but if the level
of the b-tree root node is greater than 1, nilfs_btree_get_nonroot_node(),
which accesses the buffer memory of path[x].bp_bh, is called.
Fix this issue by adding a check to nilfs_btree_root_broken(), which
performs sanity checks when reading the root node from the device, to
detect this inconsistency.
Thanks to Lizhi Xu for trying to solve the bug and clarifying the cause
early on.
Link: https://lkml.kernel.org/r/20240904081401.16682-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240902084101.138971-1-lizhi.xu@windriver.com
Link: https://lkml.kernel.org/r/20240904081401.16682-2-konishi.ryusuke@gmail.com
Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9bff4c7b992038a7409f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9bff4c7b992038a7409f
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Date: Wed Sep 4 17:13:09 2024 +0900
nilfs2: fix potential oob read in nilfs_btree_check_delete()
[ Upstream commit f9c96351aa6718b42a9f42eaf7adce0356bdb5e8 ]
The function nilfs_btree_check_delete(), which checks whether degeneration
to direct mapping occurs before deleting a b-tree entry, causes memory
access outside the block buffer when retrieving the maximum key if the
root node has no entries.
This does not usually happen because b-tree mappings with 0 child nodes
are never created by mkfs.nilfs2 or nilfs2 itself. However, it can happen
if the b-tree root node read from a device is configured that way, so fix
this potential issue by adding a check for that case.
Link: https://lkml.kernel.org/r/20240904081401.16682-4-konishi.ryusuke@gmail.com
Fixes: 17c76b0104e4 ("nilfs2: B-tree based block mapping")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Lizhi Xu <lizhi.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dave Jiang <dave.jiang@intel.com>
Date: Thu Sep 5 14:22:07 2024 -0700
ntb: Force physically contiguous allocation of rx ring buffers
[ Upstream commit 061a785a114f159e990ea8ed8d1b7dca4b41120f ]
Physical addresses under IOVA on x86 platform are mapped contiguously
as a side effect before the patch that removed CONFIG_DMA_REMAP. The
NTB rx buffer ring is a single chunk DMA buffer that is allocated
against the NTB PCI device. If the receive side is using a DMA device,
then the buffers are remapped against the DMA device before being
submitted via the dmaengine API. This scheme becomes a problem when
the physical memory is discontiguous. When dma_map_page() is called
on the kernel virtual address from the dma_alloc_coherent() call, the
new IOVA mapping no longer points to all the physical memory allocated
due to being discontiguous. Change dma_alloc_coherent() to dma_alloc_attrs()
in order to force DMA_ATTR_FORCE_CONTIGUOUS attribute. This is the best
fix for the circumstance. A potential future solution may be having the DMA
mapping API providing a way to alias an existing IOVA mapping to a new
device perhaps.
This fix is not to fix the patch pointed to by the fixes tag, but to fix
the issue arised in the ntb_transport driver on x86 platforms after the
said patch is applied.
Reported-by: Jerry Dai <jerry.dai@intel.com>
Fixes: f5ff79fddf0e ("dma-mapping: remove CONFIG_DMA_REMAP")
Tested-by: Jerry Dai <jerry.dai@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Thu Aug 31 20:39:27 2023 +0800
ntb: intel: Fix the NULL vs IS_ERR() bug for debugfs_create_dir()
[ Upstream commit e229897d373a87ee09ec5cc4ecd4bb2f895fc16b ]
The debugfs_create_dir() function returns error pointers.
It never returns NULL. So use IS_ERR() to check it.
Fixes: e26a5843f7f5 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Max Hawking <maxahawking@sonnenkinder.org>
Date: Sun Oct 8 20:45:16 2023 -0700
ntb_perf: Fix printk format
[ Upstream commit 1501ae7479c8d0f66efdbfdc9ae8d6136cefbd37 ]
The correct printk format is %pa or %pap, but not %pa[p].
Fixes: 99a06056124d ("NTB: ntb_perf: Fix address err in perf_copy_chunk")
Signed-off-by: Max Hawking <maxahawking@sonnenkinder.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Zhijian <lizhijian@fujitsu.com>
Date: Mon Aug 19 14:20:44 2024 +0800
nvdimm: Fix devs leaks in scan_labels()
[ Upstream commit 62c2aa6b1f565d2fc1ec11a6e9e8336ce37a6426 ]
scan_labels() leaks memory when label scanning fails and it falls back
to just creating a default "seed" namespace for userspace to configure.
Root can force the kernel to leak memory.
Allocate the minimum resources unconditionally and release them when
unneeded to avoid the memory leak.
A kmemleak reports:
unreferenced object 0xffff88800dda1980 (size 16):
comm "kworker/u10:5", pid 69, jiffies 4294671781
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 0):
[<00000000c5dea560>] __kmalloc+0x32c/0x470
[<000000009ed43c83>] nd_region_register_namespaces+0x6fb/0x1120 [libnvdimm]
[<000000000e07a65c>] nd_region_probe+0xfe/0x210 [libnvdimm]
[<000000007b79ce5f>] nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm]
[<00000000a5f3da2e>] really_probe+0xc6/0x390
[<00000000129e2a69>] __driver_probe_device+0x78/0x150
[<000000002dfed28b>] driver_probe_device+0x1e/0x90
[<00000000e7048de2>] __device_attach_driver+0x85/0x110
[<0000000032dca295>] bus_for_each_drv+0x85/0xe0
[<00000000391c5a7d>] __device_attach+0xbe/0x1e0
[<0000000026dabec0>] bus_probe_device+0x94/0xb0
[<00000000c590d936>] device_add+0x656/0x870
[<000000003d69bfaa>] nd_async_device_register+0xe/0x50 [libnvdimm]
[<000000003f4c52a4>] async_run_entry_fn+0x2e/0x110
[<00000000e201f4b0>] process_one_work+0x1ee/0x600
[<000000006d90d5a9>] worker_thread+0x183/0x350
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Fixes: 1b40e09a1232 ("libnvdimm: blk labels and namespace instantiation")
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20240819062045.1481298-1-lizhijian@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hannes Reinecke <hare@kernel.org>
Date: Sat Sep 14 14:01:22 2024 +0200
nvme-multipath: system fails to create generic nvme device
[ Upstream commit 63bcf9014e95a7d279d10d8e2caa5d88db2b1855 ]
NVME_NSHEAD_DISK_LIVE is a flag for struct nvme_ns_head, not nvme_ns.
The current code has a typo causing NVME_NSHEAD_DISK_LIVE never to
be cleared once device_add_disk_fails, causing the system never to
create the 'generic' character device. Even several rescan attempts
will change the situation and the system has to be rebooted to fix
the issue.
Fixes: 11384580e332 ("nvme-multipath: add error handling support for add_disk()")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tiezhu Yang <yangtiezhu@loongson.cn>
Date: Tue Sep 17 22:23:09 2024 +0800
objtool: Handle frame pointer related instructions
commit da5b2ad1c2f18834cb1ce429e2e5a5cf5cbdf21b upstream.
After commit a0f7085f6a63 ("LoongArch: Add RANDOMIZE_KSTACK_OFFSET
support"), there are three new instructions "addi.d $fp, $sp, 32",
"sub.d $sp, $sp, $t0" and "addi.d $sp, $fp, -32" for the secondary
stack in do_syscall(), then there is a objtool warning "return with
modified stack frame" and no handle_syscall() which is the previous
frame of do_syscall() in the call trace when executing the command
"echo l > /proc/sysrq-trigger".
objdump shows something like this:
0000000000000000 <do_syscall>:
0: 02ff8063 addi.d $sp, $sp, -32
4: 29c04076 st.d $fp, $sp, 16
8: 29c02077 st.d $s0, $sp, 8
c: 29c06061 st.d $ra, $sp, 24
10: 02c08076 addi.d $fp, $sp, 32
...
74: 0011b063 sub.d $sp, $sp, $t0
...
a8: 4c000181 jirl $ra, $t0, 0
...
dc: 02ff82c3 addi.d $sp, $fp, -32
e0: 28c06061 ld.d $ra, $sp, 24
e4: 28c04076 ld.d $fp, $sp, 16
e8: 28c02077 ld.d $s0, $sp, 8
ec: 02c08063 addi.d $sp, $sp, 32
f0: 4c000020 jirl $zero, $ra, 0
The instruction "sub.d $sp, $sp, $t0" changes the stack bottom and the
new stack size is a random value, in order to find the return address of
do_syscall() which is stored in the original stack frame after executing
"jirl $ra, $t0, 0", it should use fp which points to the original stack
top.
At the beginning, the thought is tended to decode the secondary stack
instruction "sub.d $sp, $sp, $t0" and set it as a label, then check this
label for the two frame pointer instructions to change the cfa base and
cfa offset during the period of secondary stack in update_cfi_state().
This is valid for GCC but invalid for Clang due to there are different
secondary stack instructions for ClangBuiltLinux on LoongArch, something
like this:
0000000000000000 <do_syscall>:
...
88: 00119064 sub.d $a0, $sp, $a0
8c: 00150083 or $sp, $a0, $zero
...
Actually, it equals to a single instruction "sub.d $sp, $sp, $a0", but
there is no proper condition to check it as a label like GCC, and so the
beginning thought is not a good way.
Essentially, there are two special frame pointer instructions which are
"addi.d $fp, $sp, imm" and "addi.d $sp, $fp, imm", the first one points
fp to the original stack top and the second one restores the original
stack bottom from fp.
Based on the above analysis, in order to avoid adding an arch-specific
update_cfi_state(), we just add a member "frame_pointer" in the "struct
symbol" as a label to avoid affecting the current normal case, then set
it as true only if there is "addi.d $sp, $fp, imm". The last is to check
this label for the two frame pointer instructions to change the cfa base
and cfa offset in update_cfi_state().
Tested with the following two configs:
(1) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=n
(2) CONFIG_RANDOMIZE_KSTACK_OFFSET=y &&
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
By the way, there is no effect for x86 with this patch, tested on the
x86 machine with Fedora 40 system.
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kamlesh Gurudasani <kamlesh@ti.com>
Date: Thu Aug 22 02:32:52 2024 +0530
padata: Honor the caller's alignment in case of chunk_size 0
[ Upstream commit 24cc57d8faaa4060fd58adf810b858fcfb71a02f ]
In the case where we are forcing the ps.chunk_size to be at least 1,
we are ignoring the caller's alignment.
Move the forcing of ps.chunk_size to be at least 1 before rounding it
up to caller's alignment, so that caller's alignment is honored.
While at it, use max() to force the ps.chunk_size to be at least 1 to
improve readability.
Fixes: 6d45e1c948a8 ("padata: Fix possible divide-by-0 panic in padata_mt_helper()")
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: VanGiang Nguyen <vangiang.nguyen@rohde-schwarz.com>
Date: Fri Aug 9 06:21:42 2024 +0000
padata: use integer wrap around to prevent deadlock on seq_nr overflow
commit 9a22b2812393d93d84358a760c347c21939029a6 upstream.
When submitting more than 2^32 padata objects to padata_do_serial, the
current sorting implementation incorrectly sorts padata objects with
overflowed seq_nr, causing them to be placed before existing objects in
the reorder list. This leads to a deadlock in the serialization process
as padata_find_next cannot match padata->seq_nr and pd->processed
because the padata instance with overflowed seq_nr will be selected
next.
To fix this, we use an unsigned integer wrap around to correctly sort
padata objects in scenarios with integer overflow.
Fixes: bfde23ce200e ("padata: unbind parallel jobs from specific CPUs")
Cc: <stable@vger.kernel.org>
Co-developed-by: Christian Gafert <christian.gafert@rohde-schwarz.com>
Signed-off-by: Christian Gafert <christian.gafert@rohde-schwarz.com>
Co-developed-by: Max Ferger <max.ferger@rohde-schwarz.com>
Signed-off-by: Max Ferger <max.ferger@rohde-schwarz.com>
Signed-off-by: Van Giang Nguyen <vangiang.nguyen@rohde-schwarz.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Aug 9 14:24:46 2024 +0100
PCI: Clear the LBMS bit after a link retrain
commit 8037ac08c2bbb3186f83a5a924f52d1048dbaec5 upstream.
The LBMS bit, where implemented, is set by hardware either in response
to the completion of retraining caused by writing 1 to the Retrain Link
bit or whenever hardware has changed the link speed or width in attempt
to correct unreliable link operation. It is never cleared by hardware
other than by software writing 1 to the bit position in the Link Status
register and we never do such a write.
We currently have two places, namely apply_bad_link_workaround() and
pcie_failed_link_retrain() in drivers/pci/controller/dwc/pcie-tegra194.c
and drivers/pci/quirks.c respectively where we check the state of the LBMS
bit and neither is interested in the state of the bit resulting from the
completion of retraining, both check for a link fault.
And in particular pcie_failed_link_retrain() causes issues consequently, by
trying to retrain a link where there's no downstream device anymore and the
state of 1 in the LBMS bit has been retained from when there was a device
downstream that has since been removed.
Clear the LBMS bit then at the conclusion of pcie_retrain_link(), so that
we have a single place that controls it and that our code can track link
speed or width changes resulting from unreliable link operation.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133140.61955@angie.orcam.me.uk
Reported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Aug 9 14:24:56 2024 +0100
PCI: Correct error reporting with PCIe failed link retraining
commit 712e49c967064a3a7a5738c6f65ac540a3f6a1df upstream.
Only return successful completion status from pcie_failed_link_retrain() if
retraining has actually been done, preventing excessive delays from being
triggered at call sites in a hope that communication will finally be
established with the downstream device where in fact nothing has been done
about the link in question that would justify such a hope.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091133260.61955@angie.orcam.me.uk
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Siddharth Vadapalli <s-vadapalli@ti.com>
Date: Tue Aug 27 17:54:22 2024 +0530
PCI: dra7xx: Fix error handling when IRQ request fails in probe
commit 4d60f6d4b8fa4d7bad4aeb2b3ee5c10425bc60a4 upstream.
Commit d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq()
call to the bottom of probe") moved the IRQ request for
"dra7xx-pcie-main" towards the end of dra7xx_pcie_probe().
However, the error handling does not take into account the
initialization performed by either dra7xx_add_pcie_port() or
dra7xx_add_pcie_ep(), depending on the mode of operation.
Fix the error handling to address this.
Fixes: d4c7d1a089d6 ("PCI: dwc: dra7xx: Push request_irq() call to the bottom of probe")
Link: https://lore.kernel.org/linux-pci/20240827122422.985547-3-s-vadapalli@ti.com
Tested-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Siddharth Vadapalli <s-vadapalli@ti.com>
Date: Tue Aug 27 17:54:21 2024 +0530
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
commit 03f84b3baba7836bdfc162c19288d5ce1aa92890 upstream.
Commit da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for
"dra7xx-pcie-main" IRQ") switched from devm_request_irq() to
devm_request_threaded_irq() for the "dra7xx-pcie-main" interrupt.
Since the primary handler was set to NULL, the "IRQF_ONESHOT" flag
should have also been set. Fix this.
Fixes: da87d35a6e51 ("PCI: dra7xx: Use threaded IRQ handler for "dra7xx-pcie-main" IRQ")
Suggested-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/linux-pci/20240827122422.985547-2-s-vadapalli@ti.com
Reported-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Richard Zhu <hongxing.zhu@nxp.com>
Date: Mon Jul 29 16:18:08 2024 -0400
PCI: imx6: Fix establish link failure in EP mode for i.MX8MM and i.MX8MP
commit 5214ff221a14cadab1e2ee29499750fd5e884feb upstream.
Add IMX6_PCIE_FLAG_HAS_APP_RESET flag to IMX8MM_EP and IMX8MP_EP drvdata.
This flag was overlooked during code restructuring. It is crucial to
release the app-reset from the System Reset Controller before initiating
LTSSM to rectify the issue.
Fixes: 0c9651c21f2a ("PCI: imx6: Simplify reset handling by using *_FLAG_HAS_*_RESET")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-1-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Richard Zhu <hongxing.zhu@nxp.com>
Date: Mon Jul 29 16:18:09 2024 -0400
PCI: imx6: Fix i.MX8MP PCIe EP's occasional failure to trigger MSI
commit 5cb3aa92c7cf182940ae575c3f450d3708af087c upstream.
Correct occasional MSI triggering failures in i.MX8MP PCIe EP by applying
the correct hardware outbound alignment requirement.
The i.MX platform has a restriction about outbound address translation. The
pci-epc-mem uses page_size to manage it. Set the correct page_size for i.MX
platform to meet the hardware requirement, which is the same as inbound
address alignment.
Thus, align it with epc_features::align.
Fixes: 1bd0d43dcf3b ("PCI: imx6: Clean up addr_space retrieval code")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-2-b68ee5ef2b4d@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Cc: <stable@vger.kernel.org> # 6.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Frank Li <Frank.Li@nxp.com>
Date: Mon Jul 29 16:18:10 2024 -0400
PCI: imx6: Fix missing call to phy_power_off() in error handling
commit 5b04d44d5c74e4d8aab1678496b84700b4b343fe upstream.
Fix missing call to phy_power_off() in the error path of
imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy
as the PHY API already handles NULL pointers.
Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()")
Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Fri Jul 19 18:53:26 2024 -0500
PCI: keystone: Fix if-statement expression in ks_pcie_quirk()
[ Upstream commit 6188a1c762eb9bbd444f47696eda77a5eae6207a ]
This code accidentally uses && where || was intended. It potentially
results in a NULL dereference.
Thus, fix the if-statement expression to use the correct condition.
Fixes: 86f271f22bbb ("PCI: keystone: Add workaround for Errata #i2037 (AM65x SR 1.0)")
Link: https://lore.kernel.org/linux-pci/1b762a93-e1b2-4af3-8c04-c8843905c279@stanley.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexandra Diupina <adiupina@astralinux.ru>
Date: Tue Sep 3 14:58:23 2024 +0300
PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port()
[ Upstream commit c500a86693a126c9393e602741e348f80f1b0fc5 ]
Within kirin_pcie_parse_port(), the pcie->num_slots is compared to
pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead
to an overflow.
Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move
pcie->num_slots increment below the if-statement to avoid out-of-bounds
array access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b22dbbb24571 ("PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge")
Link: https://lore.kernel.org/linux-pci/20240903115823.30647-1-adiupina@astralinux.ru
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Date: Fri Aug 30 13:53:19 2024 +0530
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
[ Upstream commit d3745e3ae6c0eec517d431be926742b6e8b9b64a ]
qcom_pcie_enable_resources() is called by qcom_pcie_ep_probe() and it
enables the controller resources like clocks, regulator, PHY. On one of the
new unreleased Qcom SoC, PHY enablement depends on the active refclk. And
on all of the supported Qcom endpoint SoCs, refclk comes from the host
(RC). So calling qcom_pcie_enable_resources() without refclk causes the
NoC (Network On Chip) error in the endpoint SoC and in turn results in a
whole SoC crash and rebooting into EDL (Emergency Download) mode which is
an unrecoverable state.
But qcom_pcie_enable_resources() is already called by
qcom_pcie_perst_deassert() when PERST# is deasserted, and refclk is
available at that time.
Hence, remove the unnecessary call to qcom_pcie_enable_resources() from
qcom_pcie_ep_probe() to prevent the above mentioned crash.
It should be noted that this commit prevents the crash only under normal
working condition (booting endpoint before host), but the crash may also
occur if PERST# assert happens at the wrong time. For avoiding the crash
completely, it is recommended to use SRIS mode which allows the endpoint
SoC to generate its own refclk. The driver is not supporting SRIS mode
currently, but will be added in the future.
Fixes: 869bc5253406 ("PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host")
Link: https://lore.kernel.org/linux-pci/20240830082319.51387-1-manivannan.sadhasivam@linaro.org
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Aug 9 14:24:51 2024 +0100
PCI: Revert to the original speed after PCIe failed link retraining
commit f68dea13405c94381d08f42dbf0416261622bdad upstream.
When `pcie_failed_link_retrain' has failed to retrain the link by hand
it leaves the link speed restricted to 2.5GT/s, which will then affect
any device that has been plugged in later on, which may not suffer from
the problem that caused the speed restriction to have been attempted.
Consequently such a downstream device will suffer from an unnecessary
communication throughput limitation and therefore performance loss.
Remove the speed restriction then and revert the Link Control 2 register
to its original state if link retraining with the speed restriction in
place has failed. Retrain the link again afterwards so as to remove any
residual state, waiting on LT rather than DLLLA to avoid an excessive
delay and ignoring the result as this training is supposed to fail
anyway.
Fixes: a89c82249c37 ("PCI: Work around PCIe link training failures")
Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2408251412590.30766@angie.orcam.me.uk
Reported-by: Matthew W Carlis <mattc@purestorage.com>
Link: https://lore.kernel.org/r/20240806000659.30859-1-mattc@purestorage.com/
Link: https://lore.kernel.org/r/20240722193407.23255-1-mattc@purestorage.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej W. Rozycki <macro@orcam.me.uk>
Date: Fri Aug 9 14:25:02 2024 +0100
PCI: Use an error code with PCIe failed link retraining
commit 59100eb248c0b15585affa546c7f6834b30eb5a4 upstream.
Given how the call place in pcie_wait_for_link_delay() got structured now,
and that pcie_retrain_link() returns a potentially useful error code,
convert pcie_failed_link_retrain() to return an error code rather than a
boolean status, fixing handling at the call site mentioned. Update the
other call site accordingly.
Fixes: 1abb47390350 ("Merge branch 'pci/enumeration'")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2408091156530.61955@angie.orcam.me.uk
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/aa2d1c4e-9961-d54a-00c7-ddf8e858a9b0@linux.intel.com/
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.5+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Date: Thu Aug 8 15:17:07 2024 +0300
PCI: Wait for Link before restoring Downstream Buses
[ Upstream commit 3e40aa29d47e231a54640addf6a09c1f64c5b63f ]
__pci_reset_bus() calls pci_bridge_secondary_bus_reset() to perform the
reset and also waits for the Secondary Bus to become again accessible.
__pci_reset_bus() then calls pci_bus_restore_locked() that restores the PCI
devices connected to the bus, and if necessary, recursively restores also
the subordinate buses and their devices.
The logic in pci_bus_restore_locked() does not take into account that after
restoring a device on one level, there might be another Link Downstream
that can only start to come up after restore has been performed for its
Downstream Port device. That is, the Link may require additional wait until
it becomes accessible.
Similarly, pci_slot_restore_locked() lacks wait.
Amend pci_bus_restore_locked() and pci_slot_restore_locked() to wait for
the Secondary Bus before recursively performing the restore of that bus.
Fixes: 090a3c5322e9 ("PCI: Add pci_reset_slot() and pci_reset_bus()")
Link: https://lore.kernel.org/r/20240808121708.2523-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Fri May 31 12:13:35 2024 -0400
PCI: xilinx-nwl: Clean up clock on probe failure/removal
[ Upstream commit cfd67903977b13f63340a4eb5a1cc890994f2c62 ]
Make sure we turn off the clock on probe failure and device removal.
Fixes: de0a01f52966 ("PCI: xilinx-nwl: Enable the clock through CCF")
Link: https://lore.kernel.org/r/20240531161337.864994-6-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Fri May 31 12:13:32 2024 -0400
PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler
commit 0199d2f2bd8cd97b310f7ed82a067247d7456029 upstream.
MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2,
and INTD in bit 3. Hardware IRQ numbers start at 0, and we register
PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0.
Remove the subtraction of one.
This bug would cause INTx interrupts not to be delivered, as enabling INTB
would actually enable INTA, and enabling INTA wouldn't enable anything at
all. It is likely that this got overlooked for so long since most PCIe
hardware uses MSIs. This fixes the following UBSAN error:
UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11
shift exponent 18446744073709551615 is too large for 32-bit type 'int'
CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268
Hardware name: xlnx,zynqmp (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:235)
show_stack (arch/arm64/kernel/stacktrace.c:242)
dump_stack_lvl (lib/dump_stack.c:107)
dump_stack (lib/dump_stack.c:114)
__ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387)
nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1))
irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345)
__irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250)
irq_startup (kernel/irq/chip.c:270)
__setup_irq (kernel/irq/manage.c:1800)
request_threaded_irq (kernel/irq/manage.c:2206)
pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348)
Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts")
Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Anderson <sean.anderson@linux.dev>
Date: Fri May 31 12:13:33 2024 -0400
PCI: xilinx-nwl: Fix register misspelling
[ Upstream commit a437027ae1730b8dc379c75fa0dd7d3036917400 ]
MSIC -> MISC
Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging")
Link: https://lore.kernel.org/r/20240531161337.864994-4-sean.anderson@linux.dev
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Fri Aug 16 16:58:32 2024 -0700
perf annotate-data: Fix off-by-one in location range check
[ Upstream commit 3ab0b8b238b5130ae3fa37ddaa329fc0e93b6b9a ]
The location list will have entries with half-open addressing like
[start, end) which means it doesn't include the end address. So it
should skip entries at the end address and match to the next entry.
An example location list looks like this (from readelf -wo):
00237876 ffffffff8110d32b (base address)
0023787f v000000000000000 v000000000000002 views at 00237868 for:
ffffffff8110d32b ffffffff8110d4eb (DW_OP_reg3 (rbx)) <<<--- 1
00237885 v000000000000002 v000000000000000 views at 0023786a for:
ffffffff8110d4eb ffffffff8110d50b (DW_OP_reg14 (r14)) <<<--- 2
0023788c v000000000000000 v000000000000001 views at 0023786c for:
ffffffff8110d50b ffffffff8110d7c4 (DW_OP_reg3 (rbx))
00237893 v000000000000000 v000000000000000 views at 0023786e for:
ffffffff8110d806 ffffffff8110d854 (DW_OP_reg3 (rbx))
0023789a v000000000000000 v000000000000000 views at 00237870 for:
ffffffff8110d876 ffffffff8110d88e (DW_OP_reg3 (rbx))
The first entry at 0023787f has [8110d32b, 8110d4eb) (omitting the
ffffffff at the beginning), and the second one has [8110d4eb, 8110d50b).
Fixes: 2bc3cf575a162a2c ("perf annotate-data: Improve debug message with location info")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnaldo Carvalho de Melo <acme@redhat.com>
Date: Wed Aug 14 10:36:24 2024 -0300
perf build: Fix up broken capstone feature detection fast path
[ Upstream commit 4c55560f23d19051adc7e76818687a88448bef83 ]
The capstone devel headers define 'struct bpf_insn' in a way that clashes with
what is in the libbpf devel headers, so we so far need to avoid including both.
This is happening on the tools/build/feature/test-all.c file, where we try
building all the expected set of libraries to be normally available on a
system:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
In file included from test-bpf.c:3,
from test-all.c:150:
/home/acme/git/perf-tools-next/tools/include/uapi/linux/bpf.h:77:8: error: ‘bpf_insn’ defined as wrong kind of tag
77 | struct bpf_insn {
| ^~~~~~~~
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
When doing so there is a trick where we define main to be
main_test_libcapstone, then include the individual
tools/build/feture/test-libcapstone.c capability query test, and then we undef
'main' because we'll do it all over again with the next expected library to
be tested (at this time 'lzma').
To complete this mechanism we need to, in test-all.c 'main' routine, to
call main_test_libcapstone(), which isn't being done, so the effect of
adding references to capstone in test-all.c are not achieved.
The only thing that is happening is that test-all.c is failing to build and thus
all the tests will have to be done individually, which nullifies the test-all.c
single build speedup.
So lets remove references to capstone from test-all.c to see if this makes it
build again so that we get faster builds or go on fixing up whatever is
preventing us to get that benefit.
Nothing: after this fix we get a clean test-all.c build and get the build speedup back:
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.
test-all.bin test-all.d test-all.make.output
⬢[acme@toolbox perf-tools-next]$ cat /tmp/build/perf-tools-next/feature/test-all.make.output
⬢[acme@toolbox perf-tools-next]$ ldd /tmp/build/perf-tools-next/feature/test-all.bin
linux-vdso.so.1 (0x00007f13277a1000)
libpython3.12.so.1.0 => /lib64/libpython3.12.so.1.0 (0x00007f1326e00000)
libm.so.6 => /lib64/libm.so.6 (0x00007f13274be000)
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1327496000)
libtracefs.so.1 => /lib64/libtracefs.so.1 (0x00007f132746f000)
libcrypto.so.3 => /lib64/libcrypto.so.3 (0x00007f1326800000)
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f1327452000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f1327436000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007f1327403000)
libdw.so.1 => /lib64/libdw.so.1 (0x00007f1326d6f000)
libz.so.1 => /lib64/libz.so.1 (0x00007f13273e2000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f1326d53000)
libnuma.so.1 => /lib64/libnuma.so.1 (0x00007f13273d4000)
libslang.so.2 => /lib64/libslang.so.2 (0x00007f1326400000)
libperl.so.5.38 => /lib64/libperl.so.5.38 (0x00007f1326000000)
libc.so.6 => /lib64/libc.so.6 (0x00007f1325e0f000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f1326741000)
/lib64/ld-linux-x86-64.so.2 (0x00007f13277a3000)
libbz2.so.1 => /lib64/libbz2.so.1 (0x00007f1326d3f000)
libcrypt.so.2 => /lib64/libcrypt.so.2 (0x00007f1326d07000)
⬢[acme@toolbox perf-tools-next]$
And when having capstone-devel installed we get it detected and linked with
perf, allowing us to benefit from the features that it enables:
⬢[acme@toolbox perf-tools-next]$ rpm -q capstone-devel
capstone-devel-5.0.1-3.fc40.x86_64
⬢[acme@toolbox perf-tools-next]$ ldd /tmp/build/perf-tools-next/perf | grep capstone
libcapstone.so.5 => /lib64/libcapstone.so.5 (0x00007fe6a5c00000)
⬢[acme@toolbox perf-tools-next]$ /tmp/build/perf-tools-next/perf -vv | grep cap
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
⬢[acme@toolbox perf-tools-next]$
Fixes: 8b767db3309595a2 ("perf: build: introduce the libcapstone")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/Zry0sepD5Ppa5YKP@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Fri Aug 16 16:58:31 2024 -0700
perf dwarf-aux: Check allowed location expressions when collecting variables
[ Upstream commit e8bb03ed6850c6ed4ce2f1600ea73401fc2ebd95 ]
It missed to call check_allowed_ops() in __die_collect_vars_cb() so it
can take variables with complex location expression incorrectly.
For example, I found some variable has this expression.
015d8df8 ffffffff81aacfb3 (base address)
015d8e01 v000000000000004 v000000000000000 views at 015d8df2 for:
ffffffff81aacfb3 ffffffff81aacfd2 (DW_OP_fbreg: -176; DW_OP_deref;
DW_OP_plus_uconst: 332; DW_OP_deref_size: 4;
DW_OP_lit1; DW_OP_shra; DW_OP_const1u: 64;
DW_OP_minus; DW_OP_stack_value)
015d8e14 v000000000000000 v000000000000000 views at 015d8df4 for:
ffffffff81aacfd2 ffffffff81aacfd7 (DW_OP_reg3 (rbx))
015d8e19 v000000000000000 v000000000000000 views at 015d8df6 for:
ffffffff81aacfd7 ffffffff81aad020 (DW_OP_fbreg: -176; DW_OP_deref;
DW_OP_plus_uconst: 332; DW_OP_deref_size: 4;
DW_OP_lit1; DW_OP_shra; DW_OP_const1u: 64;
DW_OP_minus; DW_OP_stack_value)
015d8e2c <End of list>
It looks like '((int *)(-176(%rbp) + 332) >> 1) - 64' but the current
code thought it's just -176(%rbp) and processed the variable incorrectly.
It should reject such a complex expression if check_allowed_ops()
doesn't like it. :)
Fixes: 932dcc2c39aedf54 ("perf dwarf-aux: Add die_collect_vars()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240816235840.2754937-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Wed Aug 21 16:26:25 2024 -0700
perf dwarf-aux: Handle bitfield members from pointer access
[ Upstream commit a11b4222bb579dcf9646f3c4ecd2212ae762a2c8 ]
The __die_find_member_offset_cb() missed to handle bitfield members
which don't have DW_AT_data_member_location. Like in adding member
types in __add_member_cb() it should fallback to check the bit offset
when it resolves the member type for an offset.
Fixes: 437683a9941891c1 ("perf dwarf-aux: Handle type transfer for memory access")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240821232628.353177-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Mon Jul 29 15:06:20 2024 -0700
perf inject: Fix leader sampling inserting additional samples
[ Upstream commit 79bcd34e0f3da39fda841406ccc957405e724852 ]
The processing of leader samples would turn an individual sample with
a group of read values into multiple samples. 'perf inject' would pass
through the additional samples increasing the output data file size:
$ perf record -g -e "{instructions,cycles}:S" -o perf.orig.data true
$ perf script -D -i perf.orig.data | sed -e 's/perf.orig.data/perf.data/g' > orig.txt
$ perf inject -i perf.orig.data -o perf.new.data
$ perf script -D -i perf.new.data | sed -e 's/perf.new.data/perf.data/g' > new.txt
$ diff -u orig.txt new.txt
--- orig.txt 2024-07-29 14:29:40.606576769 -0700
+++ new.txt 2024-07-29 14:30:04.142737434 -0700
...
-0xc550@perf.data [0x30]: event: 3
+0xc550@perf.data [0xd0]: event: 9
+.
+. ... raw event: size 208 bytes
+. 0000: 09 00 00 00 01 00 d0 00 fc 72 01 86 ff ff ff ff .........r......
+. 0010: 74 7d 2c 00 74 7d 2c 00 fb c3 79 f9 ba d5 05 00 t},.t},...y.....
+. 0020: e6 cb 1a 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
+. 0030: 02 00 00 00 00 00 00 00 76 01 00 00 00 00 00 00 ........v.......
+. 0040: e6 cb 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+. 0050: 62 18 00 00 00 00 00 00 f6 cb 1a 00 00 00 00 00 b...............
+. 0060: 00 00 00 00 00 00 00 00 0c 00 00 00 00 00 00 00 ................
+. 0070: 80 ff ff ff ff ff ff ff fc 72 01 86 ff ff ff ff .........r......
+. 0080: f3 0e 6e 85 ff ff ff ff 0c cb 7f 85 ff ff ff ff ..n.............
+. 0090: bc f2 87 85 ff ff ff ff 44 af 7f 85 ff ff ff ff ........D.......
+. 00a0: bd be 7f 85 ff ff ff ff 26 d0 7f 85 ff ff ff ff ........&.......
+. 00b0: 6d a4 ff 85 ff ff ff ff ea 00 20 86 ff ff ff ff m......... .....
+. 00c0: 00 fe ff ff ff ff ff ff 57 14 4f 43 fc 7e 00 00 ........W.OC.~..
+
+1642373909693435 0xc550 [0xd0]: PERF_RECORD_SAMPLE(IP, 0x1): 2915700/2915700: 0xffffffff860172fc period: 1 addr: 0
+... FP chain: nr:12
+..... 0: ffffffffffffff80
+..... 1: ffffffff860172fc
+..... 2: ffffffff856e0ef3
+..... 3: ffffffff857fcb0c
+..... 4: ffffffff8587f2bc
+..... 5: ffffffff857faf44
+..... 6: ffffffff857fbebd
+..... 7: ffffffff857fd026
+..... 8: ffffffff85ffa46d
+..... 9: ffffffff862000ea
+..... 10: fffffffffffffe00
+..... 11: 00007efc434f1457
+... sample_read:
+.... group nr 2
+..... id 00000000001acbe6, value 0000000000000176, lost 0
+..... id 00000000001acbf6, value 0000000000001862, lost 0
+
+0xc620@perf.data [0x30]: event: 3
...
This behavior is incorrect as in the case above 'perf inject' should
have done nothing. Fix this behavior by disabling separating samples
for a tool that requests it. Only request this for `perf inject` so as
to not affect other perf tools. With the patch and the test above
there are no differences between the orig.txt and new.txt.
Fixes: e4caec0d1af3d608 ("perf evsel: Add PERF_SAMPLE_READ sample related processing")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240729220620.2957754-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Mon Aug 12 10:25:33 2024 -0700
perf lock contention: Change stack_id type to s32
[ Upstream commit 040c0f887fdcfe747a3f63c94e9cd29e9ed0b872 ]
The bpf_get_stackid() helper returns a signed type to check whether it
failed to get a stacktrace or not. But it saved the result in u32 and
checked if the value is negative.
376 if (needs_callstack) {
377 pelem->stack_id = bpf_get_stackid(ctx, &stacks,
378 BPF_F_FAST_STACK_CMP | stack_skip);
--> 379 if (pelem->stack_id < 0)
./tools/perf/util/bpf_skel/lock_contention.bpf.c:379 contention_begin()
warn: unsigned 'pelem->stack_id' is never less than zero.
Let's change the type to s32 instead.
Fixes: 6d499a6b3d90277d ("perf lock: Print the number of lost entries for BPF")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240812172533.2015291-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kan Liang <kan.liang@linux.intel.com>
Date: Thu Sep 5 10:07:35 2024 -0700
perf mem: Check mem_events for all eligible PMUs
[ Upstream commit 6e05d28ff232cf445cc6ae59336b7f2081ef9b96 ]
The current perf_pmu__mem_events_init() only checks the availability of
the mem_events for the first eligible PMU. It works for non-hybrid
machines and hybrid machines that have the same mem_events.
However, it may bring issues if a hybrid machine has a different
mem_events on different PMU, e.g., Alder Lake and Raptor Lake. A
mem-loads-aux event is only required for the p-core. The mem_events on
both e-core and p-core should be checked and marked.
The issue was not found, because it's hidden by another bug, which only
records the mem-events for the e-core. The wrong check for the p-core
events didn't yell.
Fixes: abbdd79b786e036e ("perf mem: Clean up perf_mem_events__name()")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240905170737.4070743-1-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kan Liang <kan.liang@linux.intel.com>
Date: Thu Sep 5 10:07:36 2024 -0700
perf mem: Fix missed p-core mem events on ADL and RPL
[ Upstream commit 5ad7db2c3f941cde3045ce38a9c4c40b0c7d56b9 ]
The p-core mem events are missed when launching 'perf mem record' on ADL
and RPL.
root@number:~# perf mem record sleep 1
Memory events are enabled on a subset of CPUs: 16-27
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.032 MB perf.data ]
root@number:~# perf evlist
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
dummy:u
A variable 'record' in the 'struct perf_mem_event' is to indicate
whether a mem event in a mem_events[] should be recorded. The current
code only configure the variable for the first eligible PMU.
It's good enough for a non-hybrid machine or a hybrid machine which has
the same mem_events[].
However, if a different mem_events[] is used for different PMUs on a
hybrid machine, e.g., ADL or RPL, the 'record' for the second PMU never
get a chance to be set.
The mem_events[] of the second PMU are always ignored.
'perf mem' doesn't support the per-PMU configuration now. A per-PMU
mem_events[] 'record' variable doesn't make sense. Make it global.
That could also avoid searching for the per-PMU mem_events[] via
perf_pmu__mem_events_ptr every time.
Committer testing:
root@number:~# perf evlist -g
cpu_atom/mem-loads,ldlat=30/P
cpu_atom/mem-stores/P
{cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}
cpu_core/mem-stores/P
dummy:u
root@number:~#
The :S for '{cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}' is
not being added by 'perf evlist -g', to be checked.
Fixes: abbdd79b786e036e ("perf mem: Clean up perf_mem_events__name()")
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Closes: https://lore.kernel.org/lkml/Zthu81fA3kLC2CS2@x1/
Link: https://lore.kernel.org/r/20240905170737.4070743-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Namhyung Kim <namhyung@kernel.org>
Date: Wed Jul 31 16:55:01 2024 -0700
perf mem: Free the allocated sort string, fixing a leak
[ Upstream commit 3da209bb1177462b6fe8e3021a5527a5a49a9336 ]
The get_sort_order() returns either a new string (from strdup) or NULL
but it never gets freed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 2e7f545096f954a9 ("perf mem: Factor out a function to generate sort order")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240731235505.710436-3-namhyung@kernel.org
[ Added Fixes tag ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kan Liang <kan.liang@linux.intel.com>
Date: Tue Aug 13 09:02:00 2024 -0700
perf report: Fix --total-cycles --stdio output error
[ Upstream commit 3ef44458071a19e5b5832cdfe6f75273aa521b6e ]
The --total-cycles may output wrong information with the --stdio.
For example:
# perf record -e "{cycles,instructions}",cache-misses -b sleep 1
# perf report --total-cycles --stdio
The total cycles output of {cycles,instructions} and cache-misses are
almost the same.
# Samples: 938 of events 'anon group { cycles, instructions }'
# Event count (approx.): 938
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range]
# ............... .............. ........... .......... ..................................................>
#
11.19% 2.6K 0.10% 21 [perf_iterate_ctx+48 -> >
5.79% 1.4K 0.45% 97 [__intel_pmu_enable_all.constprop.0+80 -> __intel_>
5.11% 1.2K 0.33% 71 [native_write_msr+0 ->>
# Samples: 293 of event 'cache-misses'
# Event count (approx.): 293
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range]
# ............... .............. ........... .......... ..................................................>
#
11.19% 2.6K 0.13% 21 [perf_iterate_ctx+48 -> >
5.79% 1.4K 0.59% 97 [__intel_pmu_enable_all.constprop.0+80 -> __intel_>
5.11% 1.2K 0.43% 71 [native_write_msr+0 ->>
With the symbol_conf.event_group, the 'perf report' should only report the
block information of the leader event in a group.
However, the current implementation retrieves the next event's block
information, rather than the next group leader's block information.
Make sure the index is updated even if the event is skipped.
With the patch,
# Samples: 293 of event 'cache-misses'
# Event count (approx.): 293
#
# Sampled Cycles% Sampled Cycles Avg Cycles% Avg Cycles [Program Block Range]
# ............... .............. ........... .......... ..................................................>
#
37.98% 9.0K 4.05% 299 [perf_event_addr_filters_exec+0 -> perf_event_a>
11.19% 2.6K 0.28% 21 [perf_iterate_ctx+48 -> >
5.79% 1.4K 1.32% 97 [__intel_pmu_enable_all.constprop.0+80 -> __intel_>
Fixes: 6f7164fa231a5f36 ("perf report: Sort by sampled cycles percent per block for stdio")
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20240813160208.2493643-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Jihong <yangjihong@bytedance.com>
Date: Tue Aug 6 10:35:33 2024 +0800
perf sched timehist: Fix missing free of session in perf_sched__timehist()
[ Upstream commit 6bdf5168b6fb19541b0c1862bdaa596d116c7bfb ]
When perf_time__parse_str() fails in perf_sched__timehist(),
need to free session that was previously created, fix it.
Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240806023533.1316348-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Jihong <yangjihong@bytedance.com>
Date: Mon Aug 19 10:47:20 2024 +0800
perf sched timehist: Fixed timestamp error when unable to confirm event sched_in time
[ Upstream commit 39c243411bdb8fb35777adf49ee32549633c4e12 ]
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b74071110bed3 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: James Clark <james.clark@linaro.org>
Date: Tue Jul 23 14:28:58 2024 +0100
perf scripts python cs-etm: Restore first sample log in verbose mode
[ Upstream commit ae8e4f4048b839c1cb333d9e3d20e634b430139e ]
The linked commit moved the early return on the first sample to before
the verbose log, so move the log earlier too. Now the first sample is
also logged and not skipped.
Fixes: 2d98dbb4c9c5b09c ("perf scripts python arm-cs-trace-disasm.py: Do not ignore disam first sample")
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Benjamin Gray <bgray@linux.ibm.com>
Cc: coresight@lists.linaro.org
Cc: gankulkarni@os.amperecomputing.com
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ruidong Tian <tianruidong@linux.alibaba.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240723132858.12747-1-james.clark@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yicong Yang <yangyicong@hisilicon.com>
Date: Fri Aug 2 14:58:00 2024 +0800
perf stat: Display iostat headers correctly
[ Upstream commit 2615639352420e6e3115952c5b8f46846e1c6d0e ]
Currently we'll only print metric headers for metric leader in
aggregration mode. This will make `perf iostat` header not shown
since it'll aggregrated globally but don't have metric events:
root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
Performance counter stats for 'system wide':
port
0000:00 0 0 0 0
0000:80 0 0 0 0
[...]
Fix this by excluding the iostat in the check of printing metric
headers. Then we can see the headers:
root@ubuntu204:/home/yang/linux/tools/perf# ./perf stat --iostat --timeout 1000
Performance counter stats for 'system wide':
port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB)
0000:00 0 0 0 0
0000:80 0 0 0 0
[...]
Fixes: 193a9e30207f5477 ("perf stat: Don't display metric header for non-leader uncore events")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: linuxarm@huawei.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Cc: Zeng Tao <prime.zeng@hisilicon.com>
Link: https://lore.kernel.org/r/20240802065800.48774-1-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ian Rogers <irogers@google.com>
Date: Sat Aug 31 00:04:11 2024 -0700
perf time-utils: Fix 32-bit nsec parsing
[ Upstream commit 38e2648a81204c9fc5b4c87a8ffce93a6ed91b65 ]
The "time utils" test fails in 32-bit builds:
...
parse_nsec_time("18446744073.709551615")
Failed. ptime 4294967295709551615 expected 18446744073709551615
...
Switch strtoul to strtoull as an unsigned long in 32-bit build isn't
64-bits.
Fixes: c284d669a20d408b ("perf tools: Move parse_nsec_time to time-utils.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robin Murphy <robin.murphy@arm.com>
Date: Mon Sep 2 18:51:59 2024 +0100
perf/arm-cmn: Ensure dtm_idx is big enough
[ Upstream commit 359414b33e00bae91e4eabf3e4ef8e76024c7673 ]
While CMN_MAX_DIMENSION was bumped to 12 for CMN-650, that only supports
up to a 10x10 mesh, so bumping dtm_idx to 256 bits at the time worked
out OK in practice. However CMN-700 did finally support up to 144 XPs,
and thus needs a worst-case 288 bits of dtm_idx for an aggregated XP
event on a maxed-out config. Oops.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e771b358526a0d7fc06efee2c3a2fdc0c9f51d44.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robin Murphy <robin.murphy@arm.com>
Date: Mon Sep 2 18:51:58 2024 +0100
perf/arm-cmn: Fix CCLA register offset
[ Upstream commit 88b63a82c84ed9bbcbdefb10cb6f75dd1dd04887 ]
Apparently pmu_event_sel is offset by 8 for all CCLA nodes, not just
the CCLA_RNI combination type.
Fixes: 23760a014417 ("perf/arm-cmn: Add CMN-700 support")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/6e7bb06fef6046f83e7647aad0e5be544139763f.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Robin Murphy <robin.murphy@arm.com>
Date: Mon Sep 2 18:51:57 2024 +0100
perf/arm-cmn: Refactor node ID handling. Again.
[ Upstream commit e79634b53e398966c49f803c49701bc74dc3ccf8 ]
The scope of the "extra device ports" configuration is not made clear by
the CMN documentation - so far we've assumed it applies globally, based
on the sole example which suggests as much. However it transpires that
this is incorrect, and the format does in fact vary based on each
individual XP's port configuration. As a consequence, we're currenly
liable to decode the port/device indices from a node ID incorrectly,
thus program the wrong event source in the DTM leading to bogus event
counts, and also show device topology on the wrong ports in debugfs.
To put this right, rework node IDs yet again to carry around the
additional data necessary to decode them properly per-XP. At this point
the notion of fully decomposing an ID becomes more impractical than it's
worth, so unabstracting the XY mesh coordinates (where 2/3 users were
just debug anyway) ends up leaving things a bit simpler overall.
Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5195f990152fc37adba5fbf5929a6b11063d9f09.1725296395.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Date: Fri Aug 16 20:47:22 2024 +0530
perf/dwc_pcie: Always register for PCIe bus notifier
[ Upstream commit b94b05478fb6a09033bf70c6edd03f8930a0fe24 ]
When the PCIe devices are discovered late, the driver can't find
the PCIe devices and returns in the init without registering with
the bus notifier. Due to that the devices which are discovered late
the driver can't register for this.
Register for bus notifier & driver even if the device is not found
as part of init.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-3-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Date: Fri Aug 16 20:47:20 2024 +0530
perf/dwc_pcie: Fix registration issue in multi PCIe controller instances
[ Upstream commit e669388537c472142804eb5a0449cc23d5409694 ]
When there are multiple of instances of PCIe controllers, registration
to perf driver fails with this error.
sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0'
CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty
Hardware name: Qualcomm SA8775P Ride (DT)
Call trace:
dump_backtrace.part.8+0x98/0xf0
show_stack+0x14/0x1c
dump_stack_lvl+0x74/0x88
dump_stack+0x14/0x1c
sysfs_warn_dup+0x60/0x78
sysfs_create_dir_ns+0xe8/0x100
kobject_add_internal+0x94/0x224
kobject_add+0xa8/0x118
device_add+0x298/0x7b4
platform_device_add+0x1a0/0x228
platform_device_register_full+0x11c/0x148
dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu]
dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu]
do_one_initcall+0x58/0x1c0
do_init_module+0x58/0x208
load_module+0x1804/0x188c
__do_sys_init_module+0x18c/0x1f0
__arm64_sys_init_module+0x14/0x1c
invoke_syscall+0x40/0xf8
el0_svc_common.constprop.1+0x70/0xf4
do_el0_svc+0x18/0x20
el0_svc+0x28/0xb0
el0t_64_sync_handler+0x9c/0xc0
el0t_64_sync+0x160/0x164
kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST,
don't try to register things with the same name in the same directory.
This is because of having same bdf value for devices under two different
controllers.
Update the logic to use sbdf which is a unique number in case of
multi instance also.
Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver")
Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240816-dwc_pmu_fix-v2-1-198b8ab1077c@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Adrian Hunter <adrian.hunter@intel.com>
Date: Mon Jul 15 19:07:00 2024 +0300
perf/x86/intel/pt: Fix sampling synchronization
commit d92792a4b26e50b96ab734cbe203d8a4c932a7a9 upstream.
pt_event_snapshot_aux() uses pt->handle_nmi to determine if tracing
needs to be stopped, however tracing can still be going because
pt->handle_nmi is set to zero before tracing is stopped in pt_event_stop,
whereas pt_event_snapshot_aux() requires that tracing must be stopped in
order to copy a sample of trace from the buffer.
Instead call pt_config_stop() always, which anyway checks config for
RTIT_CTL_TRACEEN and does nothing if it is already clear.
Note pt_event_snapshot_aux() can continue to use pt->handle_nmi to
determine if the trace needs to be restarted afterwards.
Fixes: 25e8920b301c ("perf/x86/intel/pt: Add sampling support")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240715160712.127117-2-adrian.hunter@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kan Liang <kan.liang@linux.intel.com>
Date: Mon Sep 9 08:58:48 2024 -0700
perf/x86/intel: Allow to setup LBR for counting event for BPF
commit ef493f4b122d6b14a6de111d1acac1eab1d673b0 upstream.
The BPF subsystem may capture LBR data on a counting event. However, the
current implementation assumes that LBR can/should only be used with
sampling events.
For instance, retsnoop tool ([0]) makes an extensive use of this
functionality and sets up perf event as follows:
struct perf_event_attr attr;
memset(&attr, 0, sizeof(attr));
attr.size = sizeof(attr);
attr.type = PERF_TYPE_HARDWARE;
attr.config = PERF_COUNT_HW_CPU_CYCLES;
attr.sample_type = PERF_SAMPLE_BRANCH_STACK;
attr.branch_sample_type = PERF_SAMPLE_BRANCH_KERNEL;
To limit the LBR for a sampling event is to avoid unnecessary branch
stack setup for a counting event in the sample read. Because LBR is only
read in the sampling event's overflow.
Although in most cases LBR is used in sampling, there is no HW limit to
bind LBR to the sampling mode. Allow an LBR setup for a counting event
unless in the sample read mode.
Fixes: 85846b27072d ("perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag")
Closes: https://lore.kernel.org/lkml/20240905180055.1221620-1-andrii@kernel.org/
Reported-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240909155848.326640-1-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Date: Thu Jun 20 03:36:22 2024 +0300
phy: phy-rockchip-samsung-hdptx: Explicitly include pm_runtime.h
[ Upstream commit 1b369ff94bc36d2e16c8a91c0ea8ebd329555976 ]
Driver makes use of helpers from pm_runtime.h, but relies on the header
file being implicitly included.
Explicitly pull the header in to avoid potential build failures in some
configurations.
Fixes: 553be2830c5f ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-1-6a2d2164e508@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wang Jianzheng <wangjianzheng@vivo.com>
Date: Thu Aug 29 14:48:23 2024 +0800
pinctrl: mvebu: Fix devinit_dove_pinctrl_probe function
[ Upstream commit c25478419f6fd3f74c324a21ec007cf14f2688d7 ]
When an error occurs during the execution of the function
__devinit_dove_pinctrl_probe, the clk is not properly disabled.
Fix this by calling clk_disable_unprepare before return.
Fixes: ba607b6238a1 ("pinctrl: mvebu: make pdma clock on dove mandatory")
Signed-off-by: Wang Jianzheng <wangjianzheng@vivo.com>
Link: https://lore.kernel.org/20240829064823.19808-1-wangjianzheng@vivo.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yang Yingliang <yangyingliang@huawei.com>
Date: Mon Aug 19 10:46:25 2024 +0800
pinctrl: single: fix missing error code in pcs_probe()
[ Upstream commit cacd8cf79d7823b07619865e994a7916fcc8ae91 ]
If pinctrl_enable() fails in pcs_probe(), it should return the error code.
Fixes: 8f773bfbdd42 ("pinctrl: single: fix possible memory leak when pinctrl_enable() fails")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/20240819024625.154441-1-yangyingliang@huaweicloud.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Thu Jun 27 21:17:19 2024 +0800
pinctrl: ti: iodelay: Use scope based of_node_put() cleanups
[ Upstream commit 791a8bb202a85f707c20ef04a471519e35f089dc ]
Use scope based of_node_put() cleanup to simplify code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/20240627131721.678727-2-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: a9f2b249adee ("pinctrl: ti: ti-iodelay: Fix some error handling paths")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date: Tue Jul 9 22:37:43 2024 +0200
pinctrl: ti: ti-iodelay: Fix some error handling paths
[ Upstream commit a9f2b249adeef2b9744a884355fa8f5e581d507f ]
In the probe, if an error occurs after the ti_iodelay_pinconf_init_dev()
call, it is likely that ti_iodelay_pinconf_deinit_dev() should be called,
as already done in the remove function.
Also in ti_iodelay_pinconf_init_dev(), if an error occurs after the first
regmap_update_bits() call, it is also likely that the deinit() function
should be called.
The easier way to fix it is to add a devm_add_action_or_reset() at the
rigtht place to have ti_iodelay_pinconf_deinit_dev() called when needed.
Doing so, the .remove() function can be removed, and the associated
platform_set_drvdata() call in the probe as well.
Fixes: 003910ebc83b ("pinctrl: Introduce TI IOdelay configuration driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/0220fa5b925bd08e361be8206a5438f6229deaac.1720556038.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Thu Aug 29 19:50:32 2024 +0300
platform/x86: ideapad-laptop: Make the scope_guard() clear of its scope
[ Upstream commit a093cb667c3ff5eadd4b23ddf996d9ccae9b7ac6 ]
First of all, it's a bit counterintuitive to have something like
int err;
...
scoped_guard(...)
err = foo(...);
if (err)
return err;
Second, with a particular kernel configuration and compiler version in
one of such cases the objtool is not happy:
ideapad-laptop.o: warning: objtool: .text.fan_mode_show: unexpected end of section
I'm not an expert on all this, but the theory is that compiler and
linker in this case can't understand that 'result' variable will be
always initialized as long as no error has been returned. Assigning
'result' to a dummy value helps with this. Note, that fixing the
scoped_guard() scope (as per above) does not make issue gone.
That said, assign dummy value and make the scope_guard() clear of its scope.
For the sake of consistency do it in the entire file.
Fixes: 7cc06e729460 ("platform/x86: ideapad-laptop: add a mutex to synchronize VPC commands")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408290219.BrPO8twi-lkp@intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240829165105.1609180-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: John B. Wyatt IV <jwyatt@redhat.com>
Date: Wed Sep 4 22:19:08 2024 -0400
pm:cpupower: Add missing powercap_set_enabled() stub function
[ Upstream commit 4b80294fb53845dc5c98cca0c989da09150f2ca9 ]
There was a symbol listed in the powercap.h file that was not implemented.
Implement it with a stub return of 0.
Programs like SWIG require that functions that are defined in the
headers be implemented.
Fixes: c2294c1496b7 ("cpupower: Introduce powercap intel-rapl library and powercap-info command")
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: John B. Wyatt IV <jwyatt@redhat.com>
Signed-off-by: John B. Wyatt IV <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Wed Sep 4 16:30:45 2024 +0200
pmdomain: core: Harden inter-column space in debug summary
[ Upstream commit 692c20c4d075bd452acfbbc68200fc226c7c9496 ]
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
Fixes: 45fbc464b047 ("PM: domains: Add "performance" column to debug summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae61eb363621b981edde878e1e74d701702a579f.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Morgan <macromorgan@hotmail.com>
Date: Wed Aug 21 16:54:43 2024 -0500
power: supply: axp20x_battery: Remove design from min and max voltage
[ Upstream commit 61978807b00f8a1817b0e5580981af1cd2f428a5 ]
The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable
properties of the battery, but for this driver they are writable values
and used as the minimum and maximum values for charging. Remove the
DESIGN designation from these values.
Fixes: 46c202b5f25f ("power: supply: add battery driver for AXP20X and AXP22X PMICs")
Suggested-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Artur Weber <aweber.kernel@gmail.com>
Date: Sat Aug 17 12:51:14 2024 +0200
power: supply: max17042_battery: Fix SOC threshold calc w/ no current sense
[ Upstream commit 3a3acf839b2cedf092bdd1ff65b0e9895df1656b ]
Commit 223a3b82834f ("power: supply: max17042_battery: use VFSOC for
capacity when no rsns") made it so that capacity on systems without
current sensing would be read from VFSOC instead of RepSOC. However,
the SOC threshold calculation still read RepSOC to get the SOC
regardless of the current sensing option state.
Fix this by applying the same conditional to determine which register
should be read.
This also seems to be the intended behavior as per the datasheet - SOC
alert config value in MiscCFG on setups without current sensing is set
to a value of 0b11, indicating SOC alerts being generated based on
VFSOC, instead of 0b00 which indicates SOC alerts being generated based
on RepSOC.
This fixes an issue on the Galaxy S3/Midas boards, where the alert
interrupt would be constantly retriggered, causing high CPU usage
on idle (around ~12%-15%).
Fixes: e5f3872d2044 ("max17042: Add support for signalling change in SOC")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Tue Aug 20 11:41:34 2024 +0300
powercap: intel_rapl: Fix off by one in get_rpi()
[ Upstream commit 95f6580352a7225e619551febb83595bcb77ab17 ]
The rp->priv->rpi array is either rpi_msr or rpi_tpmi which have
NR_RAPL_PRIMITIVES number of elements. Thus the > needs to be >=
to prevent an off by one access.
Fixes: 98ff639a7289 ("powercap: intel_rapl: Support per Interface primitive information")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/86e3a059-504d-4795-a5ea-4a653f3b41f8@stanley.mountain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Tue Aug 20 19:23:45 2024 +0200
powerpc/8xx: Fix initial memory mapping
[ Upstream commit f9f2bff64c2f0dbee57be3d8c2741357ad3d05e6 ]
Commit cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
introduced an initial mapping of kernel TEXT using PAGE_KERNEL_TEXT,
but the pages that contain kernel TEXT may also contain kernel RODATA,
and depending on selected debug options PAGE_KERNEL_TEXT may be either
RWX or ROX. RODATA must be writable during init because it also
contains ro_after_init data.
So use PAGE_KERNEL_X instead to be sure it is RWX.
Fixes: cf209951fa7f ("powerpc/8xx: Map linear memory with huge pages")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/dac7a828d8497c4548c91840575a706657baa4f1.1724173828.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Tue Aug 20 19:23:46 2024 +0200
powerpc/8xx: Fix kernel vs user address comparison
[ Upstream commit 65a82e117ffeeab0baf6f871a1cab11a28ace183 ]
Since commit 9132a2e82adc ("powerpc/8xx: Define a MODULE area below
kernel text"), module exec space is below PAGE_OFFSET so not only
space above PAGE_OFFSET, but space above TASK_SIZE need to be seen
as kernel space.
Until now the problem went undetected because by default TASK_SIZE
is 0x8000000 which means address space is determined by just
checking upper address bit. But when TASK_SIZE is over 0x80000000,
PAGE_OFFSET is used for comparison, leading to thinking module
addresses are part of user space.
Fix it by using TASK_SIZE instead of PAGE_OFFSET for address
comparison.
Fixes: 9132a2e82adc ("powerpc/8xx: Define a MODULE area below kernel text")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/3f574c9845ff0a023b46cb4f38d2c45aecd769bd.1724173828.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Ellerman <mpe@ellerman.id.au>
Date: Mon Sep 16 22:05:10 2024 +1000
powerpc/atomic: Use YZ constraints for DS-form instructions
commit 39190ac7cff1fd15135fa8e658030d9646fdb5f2 upstream.
The 'ld' and 'std' instructions require a 4-byte aligned displacement
because they are DS-form instructions. But the "m" asm constraint
doesn't enforce that.
That can lead to build errors if the compiler chooses a non-aligned
displacement, as seen with GCC 14:
/tmp/ccuSzwiR.s: Assembler messages:
/tmp/ccuSzwiR.s:2579: Error: operand out of domain (39 is not a multiple of 4)
make[5]: *** [scripts/Makefile.build:229: net/core/page_pool.o] Error 1
Dumping the generated assembler shows:
ld 8,39(8) # MEM[(const struct atomic64_t *)_29].counter, t
Use the YZ constraints to tell the compiler either to generate a DS-form
displacement, or use an X-form instruction, either of which prevents the
build error.
See commit 2d43cc701b96 ("powerpc/uaccess: Fix build errors seen with
GCC 13/14") for more details on the constraint letters.
Fixes: 9f0cbea0d8cc ("[POWERPC] Implement atomic{, 64}_{read, write}() without volatile")
Cc: stable@vger.kernel.org # v2.6.24+
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240913125302.0a06b4c7@canb.auug.org.au
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240916120510.2017749-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christophe Leroy <christophe.leroy@csgroup.eu>
Date: Thu Aug 22 10:00:29 2024 +0200
powerpc/vdso: Inconditionally use CFUNC macro
[ Upstream commit 65948b0e716a47382731889ee6bbb18642b8b003 ]
During merge of commit 4e991e3c16a3 ("powerpc: add CFUNC assembly
label annotation") a fallback version of CFUNC macro was added at
the last minute, so it can be used inconditionally.
Fixes: 4e991e3c16a3 ("powerpc: add CFUNC assembly label annotation")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0fa863f2f69b2ca4094ae066fcf1430fb31110c9.1724313540.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Wed Aug 28 21:18:14 2024 +0800
pps: add an error check in parport_attach
commit 62c5a01a5711c8e4be8ae7b6f0db663094615d48 upstream.
In parport_attach, the return value of ida_alloc is unchecked, witch leads
to the use of an invalid index value.
To address this issue, index should be checked. When the index value is
abnormal, the device should be freed.
Found by code review, compile tested only.
Cc: stable@vger.kernel.org
Fixes: fb56d97df70e ("pps: client: use new parport device model")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Link: https://lore.kernel.org/r/20240828131814.3034338-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kemeng Shi <shikemeng@huaweicloud.com>
Date: Mon Jul 15 21:05:31 2024 +0800
quota: avoid missing put_quota_format when DQUOT_SUSPENDED is passed
[ Upstream commit d16a5f852025be546b6e4ceef15899db3490f4d7 ]
Avoid missing put_quota_format when DQUOT_SUSPENDED is passed to
dquot_load_quota_sb.
Link: https://patch.msgid.link/20240715130534.2112678-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Fixes: d44c57663723 ("quota: Remove BUG_ON in dquot_load_quota_sb()")
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Heiner Kallweit <hkallweit1@gmail.com>
Date: Wed Sep 11 15:51:11 2024 +0200
r8169: disable ALDPS per default for RTL8125
[ Upstream commit b9c7ac4fe22c608acf6153a3329df2b6b6cd416c ]
En-Wei reported that traffic breaks if cable is unplugged for more
than 3s and then re-plugged. This was supposed to be fixed by
621735f59064 ("r8169: fix rare issue with broken rx after link-down on
RTL8125"). But apparently this didn't fix the issue for everybody.
The 3s threshold rang a bell, as this is the delay after which ALDPS
kicks in. And indeed disabling ALDPS fixes the issue for this user.
Maybe this fixes the issue in general. In a follow-up step we could
remove the first fix attempt and see whether anybody complains.
Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125")
Tested-by: En-Wei WU <en-wei.wu@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/778b9d86-05c4-4856-be59-cde4487b9e52@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Frederic Weisbecker <frederic@kernel.org>
Date: Wed Aug 14 00:56:40 2024 +0200
rcu/nocb: Fix RT throttling hrtimer armed from offline CPU
[ Upstream commit 9139f93209d1ffd7f489ab19dee01b7c3a1a43d2 ]
After a CPU is marked offline and until it reaches its final trip to
idle, rcuo has several opportunities to be woken up, either because
a callback has been queued in the meantime or because
rcutree_report_cpu_dead() has issued the final deferred NOCB wake up.
If RCU-boosting is enabled, RCU kthreads are set to SCHED_FIFO policy.
And if RT-bandwidth is enabled, the related hrtimer might be armed.
However this then happens after hrtimers have been migrated at the
CPUHP_AP_HRTIMERS_DYING stage, which is broken as reported by the
following warning:
Call trace:
enqueue_hrtimer+0x7c/0xf8
hrtimer_start_range_ns+0x2b8/0x300
enqueue_task_rt+0x298/0x3f0
enqueue_task+0x94/0x188
ttwu_do_activate+0xb4/0x27c
try_to_wake_up+0x2d8/0x79c
wake_up_process+0x18/0x28
__wake_nocb_gp+0x80/0x1a0
do_nocb_deferred_wakeup_common+0x3c/0xcc
rcu_report_dead+0x68/0x1ac
cpuhp_report_idle_dead+0x48/0x9c
do_idle+0x288/0x294
cpu_startup_entry+0x34/0x3c
secondary_start_kernel+0x138/0x158
Fix this with waking up rcuo using an IPI if necessary. Since the
existing API to deal with this situation only handles swait queue, rcuo
is only woken up from offline CPUs if it's not already waiting on a
grace period. In the worst case some callbacks will just wait for a
grace period to complete before being assigned to a subsequent one.
Reported-by: "Cheng-Jui Wang (王正睿)" <Cheng-Jui.Wang@mediatek.com>
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Date: Thu Sep 12 10:58:39 2024 -0400
RDMA/cxgb4: Added NULL check for lookup_atid
[ Upstream commit e766e6a92410ca269161de059fff0843b8ddd65f ]
The lookup_atid() function can return NULL if the ATID is
invalid or does not exist in the identifier table, which
could lead to dereferencing a null pointer without a
check in the `act_establish()` and `act_open_rpl()` functions.
Add a NULL check to prevent null pointer dereferencing.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cfdda9d76436 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosalinux.ru>
Link: https://patch.msgid.link/20240912145844.77516-1-m.lobanov@rosalinux.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cheng Xu <chengyou@linux.alibaba.com>
Date: Mon Sep 2 19:29:20 2024 +0800
RDMA/erdma: Return QP state in erdma_query_qp
[ Upstream commit e77127ff6416b17e0b3e630ac46ee5c9a6570f57 ]
Fix qp_state and cur_qp_state to return correct values in
struct ib_qp_attr.
Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://patch.msgid.link/20240902112920.58749-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Fri Sep 6 17:34:36 2024 +0800
RDMA/hns: Don't modify rq next block addr in HIP09 QPC
[ Upstream commit 6928d264e328e0cb5ee7663003a6e46e4cba0a7e ]
The field 'rq next block addr' in QPC can be updated by driver only
on HIP08. On HIP09 HW updates this field while driver is not allowed.
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chengchang Tang <tangchengchang@huawei.com>
Date: Fri Sep 6 17:34:42 2024 +0800
RDMA/hns: Fix 1bit-ECC recovery address in non-4K OS
[ Upstream commit ce196f6297c7f3ab7780795e40efd6c521f60c8b ]
The 1bit-ECC recovery address read from HW only contain bits 64:12, so
it should be fixed left-shifted 12 bits when used.
Currently, the driver will shift the address left by PAGE_SHIFT when
used, which is wrong in non-4K OS.
Fixes: 2de949abd6a5 ("RDMA/hns: Recover 1bit-ECC error of RAM on chip")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-8-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Thu Sep 12 19:57:00 2024 +0800
RDMA/hns: Fix ah error counter in sw stat not increasing
[ Upstream commit 39c047d4047a1242aeefa87513174b56a91080ab ]
There are several error cases where hns_roce_create_ah() returns
directly without jumping to sw stat path, thus leading to a problem
that the ah error counter does not increase.
Fixes: ee20cc17e9d8 ("RDMA/hns: Support DSCP")
Fixes: eb7854d63db5 ("RDMA/hns: Support SW stats with debugfs")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240912115700.2016443-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Mon Sep 9 14:53:31 2024 +0800
RDMA/hns: Fix restricted __le16 degrades to integer issue
[ Upstream commit f4ccc0a2a0c5977540f519588636b5bc81aae2db ]
Fix sparse warnings: restricted __le16 degrades to integer.
Fixes: 5a87279591a1 ("RDMA/hns: Support hns HW stats")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409080508.g4mNSLwy-lkp@intel.com/
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240909065331.3950268-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chengchang Tang <tangchengchang@huawei.com>
Date: Fri Sep 6 17:34:40 2024 +0800
RDMA/hns: Fix spin_unlock_irqrestore() called with IRQs enabled
[ Upstream commit 74d315b5af180220d561684d15897730135733a6 ]
Fix missuse of spin_lock_irq()/spin_unlock_irq() when
spin_lock_irqsave()/spin_lock_irqrestore() was hold.
This was discovered through the lock debugging, and the corresponding
log is as follows:
raw_local_irq_restore() called with IRQs enabled
WARNING: CPU: 96 PID: 2074 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x30/0x40
...
Call trace:
warn_bogus_irq_restore+0x30/0x40
_raw_spin_unlock_irqrestore+0x84/0xc8
add_qp_to_list+0x11c/0x148 [hns_roce_hw_v2]
hns_roce_create_qp_common.constprop.0+0x240/0x780 [hns_roce_hw_v2]
hns_roce_create_qp+0x98/0x160 [hns_roce_hw_v2]
create_qp+0x138/0x258
ib_create_qp_kernel+0x50/0xe8
create_mad_qp+0xa8/0x128
ib_mad_port_open+0x218/0x448
ib_mad_init_device+0x70/0x1f8
add_client_context+0xfc/0x220
enable_device_and_get+0xd0/0x140
ib_register_device.part.0+0xf4/0x1c8
ib_register_device+0x34/0x50
hns_roce_register_device+0x174/0x3d0 [hns_roce_hw_v2]
hns_roce_init+0xfc/0x2c0 [hns_roce_hw_v2]
__hns_roce_hw_v2_init_instance+0x7c/0x1d0 [hns_roce_hw_v2]
hns_roce_hw_v2_init_instance+0x9c/0x180 [hns_roce_hw_v2]
Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: wenglianfa <wenglianfa@huawei.com>
Date: Fri Sep 6 17:34:39 2024 +0800
RDMA/hns: Fix the overflow risk of hem_list_calc_ba_range()
[ Upstream commit d586628b169d14bbf36be64d2b3ec9d9d2fe0432 ]
The max value of 'unit' and 'hop_num' is 2^24 and 2, so the value of
'step' may exceed the range of u32. Change the type of 'step' to u64.
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: wenglianfa <wenglianfa@huawei.com>
Date: Fri Sep 6 17:34:37 2024 +0800
RDMA/hns: Fix Use-After-Free of rsv_qp on HIP08
[ Upstream commit fd8489294dd2beefb70f12ec4f6132aeec61a4d0 ]
Currently rsv_qp is freed before ib_unregister_device() is called
on HIP08. During the time interval, users can still dereg MR and
rsv_qp will be used in this process, leading to a UAF. Move the
release of rsv_qp after calling ib_unregister_device() to fix it.
Fixes: 70f92521584f ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Fri Sep 6 17:34:41 2024 +0800
RDMA/hns: Fix VF triggering PF reset in abnormal interrupt handler
[ Upstream commit 4321feefa5501a746ebf6a7d8b59e6b955ae1860 ]
In abnormal interrupt handler, a PF reset will be triggered even if
the device is a VF. It should be a VF reset.
Fixes: 2b9acb9a97fe ("RDMA/hns: Add the process of AEQ overflow for hip08")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Junxian Huang <huangjunxian6@hisilicon.com>
Date: Fri Sep 6 17:34:43 2024 +0800
RDMA/hns: Optimize hem allocation performance
[ Upstream commit fe51f6254d81f5a69c31df16353d6539b2b51630 ]
When allocating MTT hem, for each hop level of each hem that is being
allocated, the driver iterates the hem list to find out whether the
bt page has been allocated in this hop level. If not, allocate a new
one and splice it to the list. The time complexity is O(n^2) in worst
cases.
Currently the allocation for-loop uses 'unit' as the step size. This
actually has taken into account the reuse of last-hop-level MTT bt
pages by multiple buffer pages. Thus pages of last hop level will
never have been allocated, so there is no need to iterate the hem list
in last hop level.
Removing this unnecessary iteration can reduce the time complexity to
O(n).
Fixes: 38389eaa4db1 ("RDMA/hns: Add mtr support for mixed multihop addressing")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20240906093444.3571619-9-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Date: Mon Sep 16 21:58:05 2024 +0500
RDMA/irdma: fix error message in irdma_modify_qp_roce()
[ Upstream commit 9f0eafe86ea0a589676209d0cff1a1ed49a037d3 ]
Use a correct field max_dest_rd_atomic instead of max_rd_atomic for the
error output.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@maxima.ru>
Link: https://lore.kernel.org/stable/20240916165817.14691-1-v.shevtsov%40maxima.ru
Link: https://patch.msgid.link/20240916165817.14691-1-v.shevtsov@maxima.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zhu Yanjun <yanjun.zhu@linux.dev>
Date: Tue Aug 20 13:33:36 2024 +0200
RDMA/iwcm: Fix WARNING:at_kernel/workqueue.c:#check_flush_dependency
[ Upstream commit 86dfdd8288907f03c18b7fb462e0e232c4f98d89 ]
In the commit aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to
destroying CM IDs"), the function flush_workqueue is invoked to flush the
work queue iwcm_wq.
But at that time, the work queue iwcm_wq was created via the function
alloc_ordered_workqueue without the flag WQ_MEM_RECLAIM.
Because the current process is trying to flush the whole iwcm_wq, if
iwcm_wq doesn't have the flag WQ_MEM_RECLAIM, verify that the current
process is not reclaiming memory or running on a workqueue which doesn't
have the flag WQ_MEM_RECLAIM as that can break forward-progress guarantee
leading to a deadlock.
The call trace is as below:
[ 125.350876][ T1430] Call Trace:
[ 125.356281][ T1430] <TASK>
[ 125.361285][ T1430] ? __warn (kernel/panic.c:693)
[ 125.367640][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.375689][ T1430] ? report_bug (lib/bug.c:180 lib/bug.c:219)
[ 125.382505][ T1430] ? handle_bug (arch/x86/kernel/traps.c:239)
[ 125.388987][ T1430] ? exc_invalid_op (arch/x86/kernel/traps.c:260 (discriminator 1))
[ 125.395831][ T1430] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 125.403125][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.410984][ T1430] ? check_flush_dependency (kernel/workqueue.c:3706 (discriminator 9))
[ 125.418764][ T1430] __flush_workqueue (kernel/workqueue.c:3970)
[ 125.426021][ T1430] ? __pfx___might_resched (kernel/sched/core.c:10151)
[ 125.433431][ T1430] ? destroy_cm_id (drivers/infiniband/core/iwcm.c:375) iw_cm
[ 125.441209][ T1430] ? __pfx___flush_workqueue (kernel/workqueue.c:3910)
[ 125.473900][ T1430] ? _raw_spin_lock_irqsave (arch/x86/include/asm/atomic.h:107 include/linux/atomic/atomic-arch-fallback.h:2170 include/linux/atomic/atomic-instrumented.h:1302 include/asm-generic/qspinlock.h:111 include/linux/spinlock.h:187 include/linux/spinlock_api_smp.h:111 kernel/locking/spinlock.c:162)
[ 125.473909][ T1430] ? __pfx__raw_spin_lock_irqsave (kernel/locking/spinlock.c:161)
[ 125.482537][ T1430] _destroy_id (drivers/infiniband/core/cma.c:2044) rdma_cm
[ 125.495072][ T1430] nvme_rdma_free_queue (drivers/nvme/host/rdma.c:656 drivers/nvme/host/rdma.c:650) nvme_rdma
[ 125.505827][ T1430] nvme_rdma_reset_ctrl_work (drivers/nvme/host/rdma.c:2180) nvme_rdma
[ 125.505831][ T1430] process_one_work (kernel/workqueue.c:3231)
[ 125.515122][ T1430] worker_thread (kernel/workqueue.c:3306 kernel/workqueue.c:3393)
[ 125.515127][ T1430] ? __pfx_worker_thread (kernel/workqueue.c:3339)
[ 125.531837][ T1430] kthread (kernel/kthread.c:389)
[ 125.539864][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.550628][ T1430] ret_from_fork (arch/x86/kernel/process.c:147)
[ 125.558840][ T1430] ? __pfx_kthread (kernel/kthread.c:342)
[ 125.558844][ T1430] ret_from_fork_asm (arch/x86/entry/entry_64.S:257)
[ 125.566487][ T1430] </TASK>
[ 125.566488][ T1430] ---[ end trace 0000000000000000 ]---
Fixes: aee2424246f9 ("RDMA/iwcm: Fix a use-after-free related to destroying CM IDs")
Link: https://patch.msgid.link/r/20240820113336.19860-1-yanjun.zhu@linux.dev
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202408151633.fc01893c-oliver.sang@intel.com
Tested-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Guralnik <michaelgur@nvidia.com>
Date: Tue Sep 3 14:24:47 2024 +0300
RDMA/mlx5: Drop redundant work canceling from clean_keys()
[ Upstream commit 30e6bd8d3b5639f8f4261e5e6c0917ce264b8dc2 ]
The canceling of dealyed work in clean_keys() is a leftover from years
back and was added to prevent races in the cleanup process of MR cache.
The cleanup process was rewritten a few years ago and the canceling of
delayed work and flushing of workqueue was added before the call to
clean_keys().
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/943d21f5a9dba7b98a3e1d531e3561ffe9745d71.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 7ebb00cea49d ("RDMA/mlx5: Fix MR cache temp entries cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Guralnik <michaelgur@nvidia.com>
Date: Tue Sep 3 14:24:48 2024 +0300
RDMA/mlx5: Fix counter update on MR cache mkey creation
[ Upstream commit 6f5cd6ac9a4201e4ba6f10b76a9da8044d6e38b0 ]
After an mkey is created, update the counter for pending mkeys before
reshceduling the work that is filling the cache.
Rescheduling the work with a full MR cache entry and a wrong 'pending'
counter will cause us to miss disabling the fill_to_high_water flag.
Thus leaving the cache full but with an indication that it's still
needs to be filled up to it's full size (2 * limit).
Next time an mkey will be taken from the cache, we'll unnecessarily
continue the process of filling the cache to it's full size.
Fixes: 57e7071683ef ("RDMA/mlx5: Implement mkeys management via LIFO queue")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/0f44f462ba22e45f72cb3d0ec6a748634086b8d0.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Guralnik <michaelgur@nvidia.com>
Date: Tue Sep 3 14:24:50 2024 +0300
RDMA/mlx5: Fix MR cache temp entries cleanup
[ Upstream commit 7ebb00cea49db641b458edef0ede389f7004821d ]
Fix the cleanup of the temp cache entries that are dynamically created
in the MR cache.
The cleanup of the temp cache entries is currently scheduled only when a
new entry is created. Since in the cleanup of the entries only the mkeys
are destroyed and the cache entry stays in the cache, subsequent
registrations might reuse the entry and it will eventually be filled with
new mkeys without cleanup ever getting scheduled again.
On workloads that register and deregister MRs with a wide range of
properties we see the cache ends up holding many cache entries, each
holding the max number of mkeys that were ever used through it.
Additionally, as the cleanup work is scheduled to run over the whole
cache, any mkey that is returned to the cache after the cleanup was
scheduled will be held for less than the intended 30 seconds timeout.
Solve both issues by dropping the existing remove_ent_work and reusing
the existing per-entry work to also handle the temp entries cleanup.
Schedule the work to run with a 30 seconds delay every time we push an
mkey to a clean temp entry.
This ensures the cleanup runs on each entry only 30 seconds after the
first mkey was pushed to an empty entry.
As we have already been distinguishing between persistent and temp entries
when scheduling the cache_work_func, it is not being scheduled in any
other flows for the temp entries.
Another benefit from moving to a per-entry cleanup is we now not
required to hold the rb_tree mutex, thus enabling other flow to run
concurrently.
Fixes: dd1b913fb0d0 ("RDMA/mlx5: Cache all user cacheable mkeys on dereg MR flow")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/e4fa4bb03bebf20dceae320f26816cd2dde23a26.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Guralnik <michaelgur@nvidia.com>
Date: Tue Sep 3 14:24:49 2024 +0300
RDMA/mlx5: Limit usage of over-sized mkeys from the MR cache
[ Upstream commit ee6d57a2e13d11ce9050cfc3e3b69ef707a44a63 ]
When searching the MR cache for suitable cache entries, don't use mkeys
larger than twice the size required for the MR.
This should ensure the usage of mkeys closer to the minimal required size
and reduce memory waste.
On driver init we create entries for mkeys with clear attributes and
powers of 2 sizes from 4 to the max supported size.
This solves the issue for anyone using mkeys that fit these
requirements.
In the use case where an MR is registered with different attributes,
like an access flag we can't UMR, we'll create a new cache entry to store
it upon dereg.
Without this fix, any later registration with same attributes and smaller
size will use the newly created cache entry and it's mkeys, disregarding
the memory waste of using mkeys larger than required.
For example, one worst-case scenario can be when registering and
deregistering a 1GB mkey with ATS enabled which will cause the creation of
a new cache entry to hold those type of mkeys. A user registering a 4k MR
with ATS will end up using the new cache entry and an mkey that can
support a 1GB MR, thus wasting x250k memory than actually needed in the HW.
Additionally, allow all small registration to use the smallest size
cache entry that is initialized on driver load even if size is larger
than twice the required size.
Fixes: 73d09b2fe833 ("RDMA/mlx5: Introduce mlx5r_cache_rb_key")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/8ba3a6e3748aace2026de8b83da03aba084f78f4.1725362530.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mark Bloch <mbloch@nvidia.com>
Date: Mon Sep 9 20:30:20 2024 +0300
RDMA/mlx5: Obtain upper net device only when needed
[ Upstream commit 3ed7f9e239938a0cfaf3689e2f545229ecabec06 ]
Report the upper device's state as the RDMA port state only in RoCE LAG or
switchdev LAG.
Fixes: 27f9e0ccb6da ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://patch.msgid.link/20240909173025.30422-3-michaelgur@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Md Haris Iqbal <haris.iqbal@ionos.com>
Date: Wed Aug 21 13:22:12 2024 +0200
RDMA/rtrs-clt: Reset cid to con_num - 1 to stay in bounds
[ Upstream commit 3e4289b29e216a55d08a89e126bc0b37cbad9f38 ]
In the function init_conns(), after the create_con() and create_cm() for
loop if something fails. In the cleanup for loop after the destroy tag, we
access out of bound memory because cid is set to clt_path->s.con_num.
This commits resets the cid to clt_path->s.con_num - 1, to stay in bounds
in the cleanup loop later.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20240821112217.41827-7-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jack Wang <jinpu.wang@ionos.com>
Date: Wed Aug 21 13:22:10 2024 +0200
RDMA/rtrs: Reset hb_missed_cnt after receiving other traffic from peer
[ Upstream commit 3258cbbd86deaa2675e1799bc3d18bd1ef472641 ]
Reset hb_missed_cnt after receiving traffic from other peer, so
hb is more robust again high load on host or network.
Fixes: 6a98d71daea1 ("RDMA/rtrs: client: main functionality")
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20240821112217.41827-5-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen-Yu Tsai <wenst@chromium.org>
Date: Thu Aug 22 15:20:45 2024 +0800
regulator: Return actual error in of_regulator_bulk_get_all()
[ Upstream commit 395a41a1d3e377462f3eea8a205ee72be8885ff6 ]
If regulator_get() in of_regulator_bulk_get_all() returns an error, that
error gets overridden and -EINVAL is always passed out. This masks probe
deferral requests and likely won't work properly in all cases.
Fix this by letting of_regulator_bulk_get_all() return the original
error code.
Fixes: 27b9ecc7a9ba ("regulator: Add of_regulator_bulk_get_all")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240822072047.3097740-3-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Jul 19 16:36:11 2024 +0800
remoteproc: imx_rproc: Correct ddr alias for i.MX8M
[ Upstream commit c901f817792822eda9cec23814a4621fa3e66695 ]
The DDR Alias address should be 0x40000000 according to RM, so correct
it.
Fixes: 4ab8f9607aad ("remoteproc: imx_rproc: support i.MX8MQ/M")
Reported-by: Terry Lv <terry.lv@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240719-imx_rproc-v2-1-10d0268c7eb1@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peng Fan <peng.fan@nxp.com>
Date: Fri Jul 19 16:36:13 2024 +0800
remoteproc: imx_rproc: Initialize workqueue earlier
[ Upstream commit 858e57c1d3dd7b92cc0fa692ba130a0a5d57e49d ]
Initialize workqueue before requesting mailbox channel, otherwise if
mailbox interrupt comes before workqueue ready, the imx_rproc_rx_callback
will trigger issue.
Fixes: 2df7062002d0 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20240719-imx_rproc-v2-3-10d0268c7eb1@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Date: Mon Jul 29 18:57:38 2024 +0300
Remove *.orig pattern from .gitignore
commit 76be4f5a784533c71afbbb1b8f2963ef9e2ee258 upstream.
Commit 3f1b0e1f2875 (".gitignore update") added *.orig and *.rej
patterns to .gitignore in v2.6.23. The commit message didn't give a
rationale. Later on, commit 1f5d3a6b6532 ("Remove *.rej pattern from
.gitignore") removed the *.rej pattern in v2.6.26, on the rationale that
*.rej files indicated something went really wrong and should not be
ignored.
The *.rej files are now shown by `git status`, which helps located
conflicts when applying patches and lowers the probability that they
will go unnoticed. It is however still easy to overlook the *.orig files
which slowly polute the source tree. That's not as big of a deal as not
noticing a conflict, but it's still not nice.
Drop the *.orig pattern from .gitignore to avoid this and help keep the
source tree clean.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[masahiroy@kernel.org:
I do not have a strong opinion about this. Perhaps some people may have
a different opinion.
If you are someone who wants to ignore *.orig, it is likely you would
want to do so across all projects. Then, $XDG_CONFIG_HOME/git/ignore
would be more suitable for your needs. gitignore(5) suggests, "Patterns
which a user wants Git to ignore in all situations generally go into a
file specified by core.excludesFile in the user's ~/.gitconfig".
Please note that you cannot do the opposite; if *.orig is ignored by
the project's .gitignore, you cannot override the decision because
$XDG_CONFIG_HOME/git/ignore has a lower priority.
If *.orig is sitting on the fence, I'd leave it to the users. ]
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Aug 25 16:14:24 2024 +0200
reset: berlin: fix OF node leak in probe() error path
[ Upstream commit 5f58a88cc91075be38cec69b7cb70aaa4ba69e8b ]
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: aed6f3cadc86 ("reset: berlin: convert to a platform driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-1-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Aug 25 16:14:25 2024 +0200
reset: k210: fix OF node leak in probe() error path
[ Upstream commit b14e40f5dc7cd0dd7e958010e6ca9ad32ff2ddad ]
Driver is leaking OF node reference on memory allocation failure.
Acquire the OF node reference after memory allocation to fix this and
keep it simple.
Fixes: 5a2308da9f60 ("riscv: Add Canaan Kendryte K210 reset controller")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240825-reset-cleanup-scoped-v1-2-03f6d834f8c0@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Fri Sep 13 15:05:18 2024 +0200
Revert "dm: requeue IO if mapping table not yet available"
[ Upstream commit c8691cd0fc11197515ed148de0780d927bfca38b ]
This reverts commit fa247089de9936a46e290d4724cb5f0b845600f5.
The following sequence of commands causes a livelock - there will be
workqueue process looping and consuming 100% CPU:
dmsetup create --notable test
truncate -s 1MiB testdata
losetup /dev/loop0 testdata
dmsetup load test --table '0 2048 linear /dev/loop0 0'
dd if=/dev/zero of=/dev/dm-0 bs=16k count=1 conv=fdatasync
The livelock is caused by the commit fa247089de99. The commit claims that
it fixes a race condition, however, it is unknown what the actual race
condition is and what program is involved in the race condition.
When the inactive table is loaded, the nodes /dev/dm-0 and
/sys/block/dm-0 are created. /dev/dm-0 has zero size at this point. When
the device is suspended and resumed, the nodes /dev/mapper/test and
/dev/disk/* are created.
If some program opens a block device before it is created by dmsetup or
lvm, the program is buggy, so dm could just report an error as it used to
do before.
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Tue Oct 1 16:55:21 2024 +0800
Revert "LoongArch: KVM: Invalidate guest steal time address on vCPU reset"
This reverts commit 05969a6944713f159e8f28be2388500174521818 which is
commit 4956e07f05e239b274d042618a250c9fa3e92629 upstream.
LoongArch's PV steal time support is add after 6.10, so 6.10.y doesn't
need this fix.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Roman Smirnov <r.smirnov@omp.ru>
Date: Tue Jul 16 12:10:40 2024 +0300
Revert "media: tuners: fix error return code of hybrid_tuner_request_state()"
commit e25cc4be4616fcf5689622b3226d648aab253cdb upstream.
This reverts commit b9302fa7ed979e84b454e4ca92192cf485a4ed41.
As Fedor Pchelkin pointed out, this commit violates the
convention of using the macro return value, which causes errors.
For example, in functions tda18271_attach(), xc5000_attach(),
simple_tuner_attach().
Link: https://lore.kernel.org/linux-media/20240424202031.syigrtrtipbq5f2l@fpc/
Suggested-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Mon Jul 29 22:52:14 2024 +0300
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
commit b17155133391d7f6dd18d3fb94a7d492fdec18fa upstream.
The rpm_requests device nodes have the compatible node. As such the
rpmsg core uses OF modalias instead of a native rpmsg modalias. Thus if
smd-rpm is built as a module, it doesn't get autoloaded for the device.
Revert the commit bcabe1e09135 ("soc: qcom: smd-rpm: Match rpmsg channel
instead of compatible")
Fixes: bcabe1e09135 ("soc: qcom: smd-rpm: Match rpmsg channel instead of compatible")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240729-fix-smd-rpm-v2-1-0776408a94c5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Wed Oct 2 15:56:18 2024 +0200
Revert: "dm-verity: restart or panic on an I/O error"
commit 462763212dd71c41f092b48eaa352bc1f5ed5d66 upstream.
This reverts commit e6a3531dd542cb127c8de32ab1e54a48ae19962b.
The problem that the commit e6a3531dd542cb127c8de32ab1e54a48ae19962b
fixes was reported as a security bug, but Google engineers working on
Android and ChromeOS didn't want to change the default behavior, they
want to get -EIO rather than restarting the system, so I am reverting
that commit.
Note also that calling machine_restart from the I/O handling code is
potentially unsafe (the reboot notifiers may wait for the bio that
triggered the restart), but Android uses the reboot notifiers to store
the reboot reason into the PMU microcontroller, so machine_restart must
be used.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e6a3531dd542 ("dm-verity: restart or panic on an I/O error")
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Atish Patra <atishp@rivosinc.com>
Date: Fri Aug 16 00:08:08 2024 -0700
RISC-V: KVM: Allow legacy PMU access from guest
[ Upstream commit 7d1ffc8b087e97dbe1985912c7a2d00e53cea169 ]
Currently, KVM traps & emulates PMU counter access only if SBI PMU
is available as the guest can only configure/read PMU counters via
SBI only. However, if SBI PMU is not enabled in the host, the
guest will fallback to the legacy PMU which will try to access
cycle/instret and result in an illegal instruction trap which
is not desired.
KVM can allow dummy emulation of cycle/instret only for the guest
if SBI PMU is not enabled in the host. The dummy emulation will
still return zero as we don't to expose the host counter values
from a guest using legacy PMU.
Fixes: a9ac6c37521f ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-1-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Anup Patel <apatel@ventanamicro.com>
Date: Thu Aug 15 22:39:07 2024 +0530
RISC-V: KVM: Don't zero-out PMU snapshot area before freeing data
[ Upstream commit 47d40d93292d9cff8dabb735bed83d930fa03950 ]
With the latest Linux-6.11-rc3, the below NULL pointer crash is observed
when SBI PMU snapshot is enabled for the guest and the guest is forcefully
powered-off.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000508
Oops [#1]
Modules linked in: kvm
CPU: 0 UID: 0 PID: 61 Comm: term-poll Not tainted 6.11.0-rc3-00018-g44d7178dd77a #3
Hardware name: riscv-virtio,qemu (DT)
epc : __kvm_write_guest_page+0x94/0xa6 [kvm]
ra : __kvm_write_guest_page+0x54/0xa6 [kvm]
epc : ffffffff01590e98 ra : ffffffff01590e58 sp : ffff8f80001f39b0
gp : ffffffff81512a60 tp : ffffaf80024872c0 t0 : ffffaf800247e000
t1 : 00000000000007e0 t2 : 0000000000000000 s0 : ffff8f80001f39f0
s1 : 00007fff89ac4000 a0 : ffffffff015dd7e8 a1 : 0000000000000086
a2 : 0000000000000000 a3 : ffffaf8000000000 a4 : ffffaf80024882c0
a5 : 0000000000000000 a6 : ffffaf800328d780 a7 : 00000000000001cc
s2 : ffffaf800197bd00 s3 : 00000000000828c4 s4 : ffffaf800248c000
s5 : ffffaf800247d000 s6 : 0000000000001000 s7 : 0000000000001000
s8 : 0000000000000000 s9 : 00007fff861fd500 s10: 0000000000000001
s11: 0000000000800000 t3 : 00000000000004d3 t4 : 00000000000004d3
t5 : ffffffff814126e0 t6 : ffffffff81412700
status: 0000000200000120 badaddr: 0000000000000508 cause: 000000000000000d
[<ffffffff01590e98>] __kvm_write_guest_page+0x94/0xa6 [kvm]
[<ffffffff015943a6>] kvm_vcpu_write_guest+0x56/0x90 [kvm]
[<ffffffff015a175c>] kvm_pmu_clear_snapshot_area+0x42/0x7e [kvm]
[<ffffffff015a1972>] kvm_riscv_vcpu_pmu_deinit.part.0+0xe0/0x14e [kvm]
[<ffffffff015a2ad0>] kvm_riscv_vcpu_pmu_deinit+0x1a/0x24 [kvm]
[<ffffffff0159b344>] kvm_arch_vcpu_destroy+0x28/0x4c [kvm]
[<ffffffff0158e420>] kvm_destroy_vcpus+0x5a/0xda [kvm]
[<ffffffff0159930c>] kvm_arch_destroy_vm+0x14/0x28 [kvm]
[<ffffffff01593260>] kvm_destroy_vm+0x168/0x2a0 [kvm]
[<ffffffff015933d4>] kvm_put_kvm+0x3c/0x58 [kvm]
[<ffffffff01593412>] kvm_vm_release+0x22/0x2e [kvm]
Clearly, the kvm_vcpu_write_guest() function is crashing because it is
being called from kvm_pmu_clear_snapshot_area() upon guest tear down.
To address the above issue, simplify the kvm_pmu_clear_snapshot_area() to
not zero-out PMU snapshot area from kvm_pmu_clear_snapshot_area() because
the guest is anyway being tore down.
The kvm_pmu_clear_snapshot_area() is also called when guest changes
PMU snapshot area of a VCPU but even in this case the previous PMU
snaphsot area must not be zeroed-out because the guest might have
reclaimed the pervious PMU snapshot area for some other purpose.
Fixes: c2f41ddbcdd7 ("RISC-V: KVM: Implement SBI PMU Snapshot feature")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Link: https://lore.kernel.org/r/20240815170907.2792229-1-apatel@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Jones <ajones@ventanamicro.com>
Date: Wed Aug 7 17:49:44 2024 +0200
RISC-V: KVM: Fix sbiret init before forwarding to userspace
[ Upstream commit 6b7b282e6baea06ba65b55ae7d38326ceb79cebf ]
When forwarding SBI calls to userspace ensure sbiret.error is
initialized to SBI_ERR_NOT_SUPPORTED first, in case userspace
neglects to set it to anything. If userspace neglects it then we
can't be sure it did anything else either, so we just report it
didn't do or try anything. Just init sbiret.value to zero, which is
the preferred value to return when nothing special is specified.
KVM was already initializing both sbiret.error and sbiret.value, but
the values used appear to come from a copy+paste of the __sbi_ecall()
implementation, i.e. a0 and a1, which don't apply prior to the call
being executed, nor at all when forwarding to userspace.
Fixes: dea8ee31a039 ("RISC-V: KVM: Add SBI v0.1 support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240807154943.150540-2-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Atish Patra <atishp@rivosinc.com>
Date: Fri Aug 16 00:08:09 2024 -0700
RISC-V: KVM: Fix to allow hpmcounter31 from the guest
[ Upstream commit 5aa09297a3dcc798d038bd7436f8c90f664045a6 ]
The csr_fun defines a count parameter which defines the total number
CSRs emulated in KVM starting from the base. This value should be
equal to total number of counters possible for trap/emulation (32).
Fixes: a9ac6c37521f ("RISC-V: KVM: Implement trap & emulate for hpmcounters")
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20240816-kvm_pmu_fixes-v1-2-cdfce386dd93@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Mon Jul 8 11:28:46 2024 +0800
riscv: Fix fp alignment bug in perf_callchain_user()
[ Upstream commit 22ab08955ea13be04a8efd20cc30890e0afaa49c ]
The standard RISC-V calling convention said:
"The stack grows downward and the stack pointer is always
kept 16-byte aligned".
So perf_callchain_user() should check whether 16-byte aligned for fp.
Link: https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf
Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Cc: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20240708032847.2998158-2-ruanjinjie@huawei.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Harald Freudenberger <freude@linux.ibm.com>
Date: Wed Aug 28 14:25:08 2024 +0200
s390/ap: Fix deadlock caused by recursive lock of the AP bus scan mutex
[ Upstream commit 56199bb956c3ea82e39c72d2972ebf8c18c6a8c0 ]
There is a possibility to deadlock with an recursive
lock of the AP bus scan mutex ap_scan_bus_mutex:
... kernel: ============================================
... kernel: WARNING: possible recursive locking detected
... kernel: 5.14.0-496.el9.s390x #3 Not tainted
... kernel: --------------------------------------------
... kernel: kworker/12:1/130 is trying to acquire lock:
... kernel: 0000000358bc1510 (ap_scan_bus_mutex){+.+.}-{3:3}, at: ap_bus_force_rescan+0x92/0x108
... kernel:
but task is already holding lock:
... kernel: 0000000358bc1510 (ap_scan_bus_mutex){+.+.}-{3:3}, at: ap_scan_bus_wq_callback+0x28/0x60
... kernel:
other info that might help us debug this:
... kernel: Possible unsafe locking scenario:
... kernel: CPU0
... kernel: ----
... kernel: lock(ap_scan_bus_mutex);
... kernel: lock(ap_scan_bus_mutex);
... kernel:
*** DEADLOCK ***
Here is how the callstack looks like:
... [<00000003576fe9ce>] process_one_work+0x2a6/0x748
... [<0000000358150c00>] ap_scan_bus_wq_callback+0x40/0x60 <- mutex locked
... [<00000003581506e2>] ap_scan_bus+0x5a/0x3b0
... [<000000035815037c>] ap_scan_adapter+0x5b4/0x8c0
... [<000000035814fa34>] ap_scan_domains+0x2d4/0x668
... [<0000000357d989b4>] device_add+0x4a4/0x6b8
... [<0000000357d9bb54>] bus_probe_device+0xb4/0xc8
... [<0000000357d9daa8>] __device_attach+0x120/0x1b0
... [<0000000357d9a632>] bus_for_each_drv+0x8a/0xd0
... [<0000000357d9d548>] __device_attach_driver+0xc0/0x140
... [<0000000357d9d3d8>] driver_probe_device+0x40/0xf0
... [<0000000357d9cec2>] really_probe+0xd2/0x460
... [<000000035814d7b0>] ap_device_probe+0x150/0x208
... [<000003ff802a5c46>] zcrypt_cex4_queue_probe+0xb6/0x1c0 [zcrypt_cex4]
... [<000003ff7fb2d36e>] zcrypt_queue_register+0xe6/0x1b0 [zcrypt]
... [<000003ff7fb2c8ac>] zcrypt_rng_device_add+0x94/0xd8 [zcrypt]
... [<0000000357d7bc52>] hwrng_register+0x212/0x228
... [<0000000357d7b8c2>] add_early_randomness+0x102/0x110
... [<000003ff7fb29c94>] zcrypt_rng_data_read+0x94/0xb8 [zcrypt]
... [<0000000358150aca>] ap_bus_force_rescan+0x92/0x108
... [<0000000358177572>] mutex_lock_interruptible_nested+0x32/0x40 <- lock again
Note this only happens when the very first random data providing
crypto card appears via hot plug in the system AND is in disabled
state ("deconfig"). Then the initial pull of random data fails and
a re-scan of the AP bus is triggered while already in the middle
of an AP bus scan caused by the appearing new hardware.
The fix is relatively simple once the scenario us understood:
The AP bus force rescan function will immediately return if there
is currently an AP bus scan running with the very same thread id.
Fixes: eacf5b3651c5 ("s390/ap: introduce mutex to lock the AP bus scan")
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasily Gorbik <gor@linux.ibm.com>
Date: Sat Aug 24 02:14:04 2024 +0200
s390/ftrace: Avoid calling unwinder in ftrace_return_address()
commit a84dd0d8ae24bdc6da341187fc4c1a0adfce2ccc upstream.
ftrace_return_address() is called extremely often from
performance-critical code paths when debugging features like
CONFIG_TRACE_IRQFLAGS are enabled. For example, with debug_defconfig,
ftrace selftests on my LPAR currently execute ftrace_return_address()
as follows:
ftrace_return_address(0) - 0 times (common code uses __builtin_return_address(0) instead)
ftrace_return_address(1) - 2,986,805,401 times (with this patch applied)
ftrace_return_address(2) - 140 times
ftrace_return_address(>2) - 0 times
The use of __builtin_return_address(n) was replaced by return_address()
with an unwinder call by commit cae74ba8c295 ("s390/ftrace:
Use unwinder instead of __builtin_return_address()") because
__builtin_return_address(n) simply walks the stack backchain and doesn't
check for reaching the stack top. For shallow stacks with fewer than
"n" frames, this results in reads at low addresses and random
memory accesses.
While calling the fully functional unwinder "works", it is very slow
for this purpose. Moreover, potentially following stack switches and
walking past IRQ context is simply wrong thing to do for
ftrace_return_address().
Reimplement return_address() to essentially be __builtin_return_address(n)
with checks for reaching the stack top. Since the ftrace_return_address(n)
argument is always a constant, keep the implementation in the header,
allowing both GCC and Clang to unroll the loop and optimize it to the
bare minimum.
Fixes: cae74ba8c295 ("s390/ftrace: Use unwinder instead of __builtin_return_address()")
Cc: stable@vger.kernel.org
Reported-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiangshan Yi <yijiangshan@kylinos.cn>
Date: Thu Aug 15 21:55:24 2024 +0800
samples/bpf: Fix compilation errors with cf-protection option
[ Upstream commit fdf1c728fac541891ef1aa773bfd42728626769c ]
Currently, compiling the bpf programs will result the compilation errors
with the cf-protection option as follows in arm64 and loongarch64 machine
when using gcc 12.3.1 and clang 17.0.6. This commit fixes the compilation
errors by limited the cf-protection option only used in x86 platform.
[root@localhost linux]# make M=samples/bpf
......
CLANG-bpf samples/bpf/xdp2skb_meta_kern.o
error: option 'cf-protection=return' cannot be specified on this target
error: option 'cf-protection=branch' cannot be specified on this target
2 errors generated.
CLANG-bpf samples/bpf/syscall_tp_kern.o
error: option 'cf-protection=return' cannot be specified on this target
error: option 'cf-protection=branch' cannot be specified on this target
2 errors generated.
......
Fixes: 34f6e38f58db ("samples/bpf: fix warning with ignored-attributes")
Reported-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Qiang Wang <wangqiang1@kylinos.cn>
Link: https://lore.kernel.org/bpf/20240815135524.140675-1-13667453960@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Huang Shijie <shijie@os.amperecomputing.com>
Date: Thu Aug 29 11:11:11 2024 +0800
sched/deadline: Fix schedstats vs deadline servers
[ Upstream commit 9c602adb799e72ee537c0c7ca7e828c3fe2acad6 ]
In dl_server_start(), when schedstats is enabled, the following
happens:
dl_server_start()
dl_se->dl_server = 1;
enqueue_dl_entity()
update_stats_enqueue_dl()
__schedstats_from_dl_se()
dl_task_of()
BUG_ON(dl_server(dl_se));
Since only tasks have schedstats and internal entries do not, avoid
trying to update stats in this case.
Fixes: 63ba8422f876 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20240829031111.12142-1-shijie@os.amperecomputing.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tianchen Ding <dtcccc@linux.alibaba.com>
Date: Wed Jun 26 10:35:05 2024 +0800
sched/fair: Make SCHED_IDLE entity be preempted in strict hierarchy
[ Upstream commit faa42d29419def58d3c3e5b14ad4037f0af3b496 ]
Consider the following cgroup:
root
|
------------------------
| |
normal_cgroup idle_cgroup
| |
SCHED_IDLE task_A SCHED_NORMAL task_B
According to the cgroup hierarchy, A should preempt B. But current
check_preempt_wakeup_fair() treats cgroup se and task separately, so B
will preempt A unexpectedly.
Unify the wakeup logic by {c,p}se_is_idle only. This makes SCHED_IDLE of
a task a relative policy that is effective only within its own cgroup,
similar to the behavior of NICE.
Also fix se_is_idle() definition when !CONFIG_FAIR_GROUP_SCHED.
Fixes: 304000390f88 ("sched: Cgroup SCHED_IDLE support")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Don <joshdon@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20240626023505.1332596-1-dtcccc@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yujie Liu <yujie.liu@intel.com>
Date: Tue Aug 27 19:29:58 2024 +0800
sched/numa: Fix the vma scan starving issue
[ Upstream commit f22cde4371f3c624e947a35b075c06c771442a43 ]
Problem statement:
Since commit fc137c0ddab2 ("sched/numa: enhance vma scanning logic"), the
Numa vma scan overhead has been reduced a lot. Meanwhile, the reducing of
the vma scan might create less Numa page fault information. The
insufficient information makes it harder for the Numa balancer to make
decision. Later, commit b7a5b537c55c08 ("sched/numa: Complete scanning of
partial VMAs regardless of PID activity") and commit 84db47ca7146d7
("sched/numa: Fix mm numa_scan_seq based unconditional scan") are found to
bring back part of the performance.
Recently when running SPECcpu omnetpp_r on a 320 CPUs/2 Sockets system, a
long duration of remote Numa node read was observed by PMU events: A few
cores having ~500MB/s remote memory access for ~20 seconds. It causes
high core-to-core variance and performance penalty. After the
investigation, it is found that many vmas are skipped due to the active
PID check. According to the trace events, in most cases,
vma_is_accessed() returns false because the history access info stored in
pids_active array has been cleared.
Proposal:
The main idea is to adjust vma_is_accessed() to let it return true easier.
Thus compare the diff between mm->numa_scan_seq and
vma->numab_state->prev_scan_seq. If the diff has exceeded the threshold,
scan the vma.
This patch especially helps the cases where there are small number of
threads, like the process-based SPECcpu. Without this patch, if the
SPECcpu process access the vma at the beginning, then sleeps for a long
time, the pid_active array will be cleared. A a result, if this process
is woken up again, it never has a chance to set prot_none anymore.
Because only the first 2 times of access is granted for vma scan:
(current->mm->numa_scan_seq) - vma->numab_state->start_scan_seq) < 2 to be
worse, no other threads within the task can help set the prot_none. This
causes information lost.
Raghavendra helped test current patch and got the positive result
on the AMD platform:
autonumabench NUMA01
base patched
Amean syst-NUMA01 194.05 ( 0.00%) 165.11 * 14.92%*
Amean elsp-NUMA01 324.86 ( 0.00%) 315.58 * 2.86%*
Duration User 380345.36 368252.04
Duration System 1358.89 1156.23
Duration Elapsed 2277.45 2213.25
autonumabench NUMA02
Amean syst-NUMA02 1.12 ( 0.00%) 1.09 * 2.93%*
Amean elsp-NUMA02 3.50 ( 0.00%) 3.56 * -1.84%*
Duration User 1513.23 1575.48
Duration System 8.33 8.13
Duration Elapsed 28.59 29.71
kernbench
Amean user-256 22935.42 ( 0.00%) 22535.19 * 1.75%*
Amean syst-256 7284.16 ( 0.00%) 7608.72 * -4.46%*
Amean elsp-256 159.01 ( 0.00%) 158.17 * 0.53%*
Duration User 68816.41 67615.74
Duration System 21873.94 22848.08
Duration Elapsed 506.66 504.55
Intel 256 CPUs/2 Sockets:
autonuma benchmark also shows improvements:
v6.10-rc5 v6.10-rc5
+patch
Amean syst-NUMA01 245.85 ( 0.00%) 230.84 * 6.11%*
Amean syst-NUMA01_THREADLOCAL 205.27 ( 0.00%) 191.86 * 6.53%*
Amean syst-NUMA02 18.57 ( 0.00%) 18.09 * 2.58%*
Amean syst-NUMA02_SMT 2.63 ( 0.00%) 2.54 * 3.47%*
Amean elsp-NUMA01 517.17 ( 0.00%) 526.34 * -1.77%*
Amean elsp-NUMA01_THREADLOCAL 99.92 ( 0.00%) 100.59 * -0.67%*
Amean elsp-NUMA02 15.81 ( 0.00%) 15.72 * 0.59%*
Amean elsp-NUMA02_SMT 13.23 ( 0.00%) 12.89 * 2.53%*
v6.10-rc5 v6.10-rc5
+patch
Duration User 1064010.16 1075416.23
Duration System 3307.64 3104.66
Duration Elapsed 4537.54 4604.73
The SPECcpu remote node access issue disappears with the patch applied.
Link: https://lkml.kernel.org/r/20240827112958.181388-1-yu.c.chen@intel.com
Fixes: fc137c0ddab2 ("sched/numa: enhance vma scanning logic")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Reviewed-and-tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chen Yu <yu.c.chen@intel.com>
Date: Tue Aug 27 19:26:07 2024 +0800
sched/pelt: Use rq_clock_task() for hw_pressure
[ Upstream commit 84d265281d6cea65353fc24146280e0d86ac50cb ]
commit 97450eb90965 ("sched/pelt: Remove shift of thermal clock")
removed the decay_shift for hw_pressure. This commit uses the
sched_clock_task() in sched_tick() while it replaces the
sched_clock_task() with rq_clock_pelt() in __update_blocked_others().
This could bring inconsistence. One possible scenario I can think of
is in ___update_load_sum():
u64 delta = now - sa->last_update_time
'now' could be calculated by rq_clock_pelt() from
__update_blocked_others(), and last_update_time was calculated by
rq_clock_task() previously from sched_tick(). Usually the former
chases after the latter, it cause a very large 'delta' and brings
unexpected behavior.
Fixes: 97450eb90965 ("sched/pelt: Remove shift of thermal clock")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Hongyan Xia <hongyan.xia2@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20240827112607.181206-1-yu.c.chen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Thu Aug 15 14:29:05 2024 +0300
scsi: elx: libefc: Fix potential use after free in efc_nport_vport_del()
[ Upstream commit 2e4b02fad094976763af08fec2c620f4f8edd9ae ]
The kref_put() function will call nport->release if the refcount drops to
zero. The nport->release release function is _efc_nport_free() which frees
"nport". But then we dereference "nport" on the next line which is a use
after free. Re-order these lines to avoid the use after free.
Fixes: fcd427303eb9 ("scsi: elx: libefc: SLI and FC PORT state machine interfaces")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/b666ab26-6581-4213-9a3d-32a9147f0399@stanley.mountain
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Tee <justin.tee@broadcom.com>
Date: Thu Sep 12 16:24:42 2024 -0700
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
commit 05ab4e7846f1103377133c00295a9a910cc6dfc2 upstream.
An older generation of HBAs are failing FCP discovery due to usage of an
outdated field in FCP command WQEs.
Fix by checking the SLI Interface Type register for applicable support of
32 Byte CDB commands, and restore a setting for a WQE path using normal 16
byte CDBs.
Fixes: af20bb73ac25 ("scsi: lpfc: Add support for 32 byte CDBs")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240912232447.45607-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Wed Aug 7 13:36:28 2024 +1000
scsi: mac_scsi: Disallow bus errors during PDMA send
commit 5551bc30e4a69ad86d0d008e2f56cd59b6583476 upstream.
SD cards can produce write latency spikes on the order of a hundred
milliseconds. If the target firmware does not hide that latency during DATA
IN and OUT phases it can cause the PDMA circuitry to raise a processor bus
fault which in turn leads to an unreliable byte count and a DMA overrun.
The Last Byte Sent flag is used to detect the overrun but this mechanism is
unreliable on some systems. Instead, set a DID_ERROR result whenever there
is a bus fault during a PDMA send, unless the cause was a phase mismatch.
Cc: stable@vger.kernel.org # 5.15+
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 7c1f3e3447a1 ("scsi: mac_scsi: Treat Last Byte Sent time-out as failure")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/cc38df687ace2c4ffc375a683b2502fc476b600d.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Wed Aug 7 13:36:28 2024 +1000
scsi: mac_scsi: Refactor polling loop
commit 5545c3165cbc98615fe65a44f41167cbb557e410 upstream.
Before the error handling can be revised, some preparation is needed.
Refactor the polling loop with a new function, macscsi_wait_for_drq().
This function will gain more call sites in the next patch.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/6a5ffabb4290c0d138c6d285fda8fa3902e926f0.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Wed Aug 7 13:36:28 2024 +1000
scsi: mac_scsi: Revise printk(KERN_DEBUG ...) messages
commit 5ec4f820cb9766e4583df947150a6febce8da794 upstream.
After a bus fault, capture and log the chip registers immediately, if the
NDEBUG_PSEUDO_DMA macro is defined. Remove some printk(KERN_DEBUG ...)
messages that aren't needed any more. Don't skip the debug message when
bytes == 0. Show all of the byte counters in the debug messages.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/7573c79f4e488fc00af2b8a191e257ca945e0409.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Finn Thain <fthain@linux-m68k.org>
Date: Wed Aug 7 13:36:28 2024 +1000
scsi: NCR5380: Check for phase match during PDMA fixup
[ Upstream commit 5768718da9417331803fc4bc090544c2a93b88dc ]
It's not an error for a target to change the bus phase during a transfer.
Unfortunately, the FLAG_DMA_FIXUP workaround does not allow for that -- a
phase change produces a DRQ timeout error and the device borken flag will
be set.
Check the phase match bit during FLAG_DMA_FIXUP processing. Don't forget to
decrement the command residual. While we are here, change shost_printk()
into scmd_printk() for better consistency with other DMA error messages.
Tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 55181be8ced1 ("ncr5380: Replace redundant flags with FLAG_NO_DMA_FIXUP")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/99dc7d1f4c825621b5b120963a69f6cd3e9ca659.1723001788.git.fthain@linux-m68k.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Martin Wilck <mwilck@suse.com>
Date: Thu Sep 12 15:43:08 2024 +0200
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
commit f81eaf08385ddd474a2f41595a7757502870c0eb upstream.
Ff the device returns page 0xb1 with length 8 (happens with qemu v2.x, for
example), sd_read_block_characteristics() may attempt an out-of-bounds
memory access when accessing the zoned field at offset 8.
Fixes: 7fb019c46eee ("scsi: sd: Switch to using scsi_device VPD pages")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20240912134308.282824-1-mwilck@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Gilbert Wu <Gilbert.Wu@microchip.com>
Date: Thu Jul 11 14:47:02 2024 -0500
scsi: smartpqi: revert propagate-the-multipath-failure-to-SML-quickly
[ Upstream commit f1393d52e6cda9c20f12643cbecf1e1dc357e0e2 ]
Correct a rare multipath failure issue by reverting commit 94a68c814328
("scsi: smartpqi: Quickly propagate path failures to SCSI midlayer") [1].
Reason for revert: The patch propagated the path failure to SML quickly
when one of the path fails during IO and AIO path gets disabled for a
multipath device.
But it created a new issue: when creating a volume on an encryption-enabled
controller, the firmware reports the AIO path is disabled, which cause the
driver to report a path failure to SML for a multipath device.
There will be a new fix to handle "Illegal request" and "Invalid field in
parameter list" on RAID path when the AIO path is disabled on a multipath
device.
[1] https://lore.kernel.org/all/164375209313.440833.9992416628621839233.stgit@brunhilda.pdev.net/
Fixes: 94a68c814328 ("scsi: smartpqi: Quickly propagate path failures to SCSI midlayer")
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240711194704.982400-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Manish Pandey <quic_mapa@quicinc.com>
Date: Tue Sep 3 12:07:09 2024 +0530
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
commit 0c40f079f1c808e7e480c795a79009f200366eb1 upstream.
Commit 8db8f6ce556a ("scsi: ufs: qcom: Add missing interconnect bandwidth
values for Gear 5") updated the ufs_qcom_bw_table for Gear 5. However, it
missed updating the cfg_bw value for the max mode.
Hence update the cfg_bw value for the max mode for UFS 4.x devices.
Fixes: 8db8f6ce556a ("scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5")
Cc: stable@vger.kernel.org
Signed-off-by: Manish Pandey <quic_mapa@quicinc.com>
Link: https://lore.kernel.org/r/20240903063709.4335-1-quic_mapa@quicinc.com
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Mon Jul 22 16:38:43 2024 -0700
selftests/bpf: __arch_* macro to limit test cases to specific archs
[ Upstream commit ee7fe84468b1732fe65c5af3836437d54ac4c419 ]
Add annotations __arch_x86_64, __arch_arm64, __arch_riscv64
to specify on which architecture the test case should be tested.
Several __arch_* annotations could be specified at once.
When test case is not run on current arch it is marked as skipped.
For example, the following would be tested only on arm64 and riscv64:
SEC("raw_tp")
__arch_arm64
__arch_riscv64
__xlated("1: *(u64 *)(r10 - 16) = r1")
__xlated("2: call")
__xlated("3: r1 = *(u64 *)(r10 - 16);")
__success
__naked void canary_arm64_riscv64(void)
{
asm volatile (
"r1 = 1;"
"*(u64 *)(r10 - 16) = r1;"
"call %[bpf_get_smp_processor_id];"
"r1 = *(u64 *)(r10 - 16);"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
On x86 it would be skipped:
#467/2 verifier_nocsr/canary_arm64_riscv64:SKIP
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-10-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Mon Jul 22 16:38:42 2024 -0700
selftests/bpf: allow checking xlated programs in verifier_* tests
[ Upstream commit 9c9f7339131030949a8ef111080427ff1a8085b5 ]
Add a macro __xlated("...") for use with test_loader tests.
When such annotations are present for the test case:
- bpf_prog_get_info_by_fd() is used to get BPF program after all
rewrites are applied by verifier.
- the program is disassembled and patterns specified in __xlated are
searched for in the disassembly text.
__xlated matching follows the same mechanics as __msg:
each subsequent pattern is matched from the point where
previous pattern ended.
This allows to write tests like below, where the goal is to verify the
behavior of one of the of the transformations applied by verifier:
SEC("raw_tp")
__xlated("1: w0 = ")
__xlated("2: r0 = &(void __percpu *)(r0)")
__xlated("3: r0 = *(u32 *)(r0 +0)")
__xlated("4: exit")
__success __naked void simple(void)
{
asm volatile (
"call %[bpf_get_smp_processor_id];"
"exit;"
:
: __imm(bpf_get_smp_processor_id)
: __clobber_all);
}
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-9-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Tue Aug 20 03:23:50 2024 -0700
selftests/bpf: correctly move 'log' upon successful match
commit d0a29cdb6ef95d8a175e09ab2d1334271f047e60 upstream.
Suppose log="foo bar buz" and msg->substr="bar".
In such case current match processing logic would update 'log' as
follows: log += strlen(msg->substr); -> log += 3 -> log=" bar".
However, the intent behind the 'log' update is to make it point after
the successful match, e.g. to make log=" buz" in the example above.
Fixes: 4ef5d6af4935 ("selftests/bpf: no need to track next_match_pos in struct test_loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:31 2024 -0700
selftests/bpf: Drop unneeded error.h includes
[ Upstream commit 69f409469c9b1515a5db40d5a36fda372376fa2d ]
The addition of general support for unprivileged tests in test_loader.c
breaks building test_verifier on non-glibc (e.g. musl) systems, due to the
inclusion of glibc extension '<error.h>' in 'unpriv_helpers.c'. However,
the header is actually not needed, so remove it to restore building.
Similarly for sk_lookup.c and flow_dissector.c, error.h is not necessary
and causes problems, so drop them.
Fixes: 1d56ade032a4 ("selftests/bpf: Unprivileged tests for test_loader.c")
Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Fixes: 0905beec9f52 ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/5664367edf5fea4f3f4b4aec3b182bcfc6edff9c.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Mon Jul 22 16:38:41 2024 -0700
selftests/bpf: extract test_loader->expect_msgs as a data structure
[ Upstream commit 64f01e935ddb26f48baec71883c27878ac4231dc ]
Non-functional change: use a separate data structure to represented
expected messages in test_loader.
This would allow to use the same functionality for expected set of
disassembled instructions in the follow-up commit.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-8-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 29 02:24:18 2024 -0700
selftests/bpf: Fix arg parsing in veristat, test_progs
[ Upstream commit 03bfcda1fbc37ef34aa21d2b9e09138335afc6ee ]
Current code parses arguments with strtok_r() using a construct like
char *state = NULL;
while ((next = strtok_r(state ? NULL : input, ",", &state))) {
...
}
where logic assumes the 'state' var can distinguish between first and
subsequent strtok_r() calls, and adjusts parameters accordingly. However,
'state' is strictly internal context for strtok_r() and no such assumptions
are supported in the man page. Moreover, the exact behaviour of 'state'
depends on the libc implementation, making the above code fragile.
Indeed, invoking "./test_progs -t <test_name>" on mips64el/musl will hang,
with the above code in an infinite loop.
Similarly, we see strange behaviour running 'veristat' on mips64el/musl:
$ ./veristat -e file,prog,verdict,insns -C two-ok add-failure
Can't specify more than 9 stats
Rewrite code using a counter to distinguish between strtok_r() calls.
Fixes: 61ddff373ffa ("selftests/bpf: Improve by-name subtest selection logic in prog_tests")
Fixes: 394169b079b5 ("selftests/bpf: add comparison mode to veristat")
Fixes: c8bc5e050976 ("selftests/bpf: Add veristat tool for mass-verifying BPF object files")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/392d8bf5559f85fa37926c1494e62312ef252c3d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 29 02:24:20 2024 -0700
selftests/bpf: Fix C++ compile error from missing _Bool type
[ Upstream commit aa95073fd290b5b3e45f067fa22bb25e59e1ff7c ]
While building, bpftool makes a skeleton from test_core_extern.c, which
itself includes <stdbool.h> and uses the 'bool' type. However, the skeleton
test_core_extern.skel.h generated *does not* include <stdbool.h> or use the
'bool' type, instead using the C-only '_Bool' type. Compiling test_cpp.cpp
with g++ 12.3 for mips64el/musl-libc then fails with error:
In file included from test_cpp.cpp:9:
test_core_extern.skel.h:45:17: error: '_Bool' does not name a type
45 | _Bool CONFIG_BOOL;
| ^~~~~
This was likely missed previously because glibc uses a GNU extension for
<stdbool.h> with C++ (#define _Bool bool), not supported by musl libc.
Normally, a C fragment would include <stdbool.h> and use the 'bool' type,
and thus cleanly work after import by C++. The ideal fix would be for
'bpftool gen skeleton' to output the correct type/include supporting C++,
but in the meantime add a conditional define as above.
Fixes: 7c8dce4b1661 ("bpftool: Make skeleton C code compilable with C++ compiler")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/6fc1dd28b8bda49e51e4f610bdc9d22f4455632d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:29 2024 -0700
selftests/bpf: Fix compile error from rlim_t in sk_storage_map.c
[ Upstream commit d393f9479d4aaab0fa4c3caf513f28685e831f13 ]
Cast 'rlim_t' argument to match expected type of printf() format and avoid
compile errors seen building for mips64el/musl-libc:
In file included from map_tests/sk_storage_map.c:20:
map_tests/sk_storage_map.c: In function 'test_sk_storage_map_stress_free':
map_tests/sk_storage_map.c:414:56: error: format '%lu' expects argument of type 'long unsigned int', but argument 2 has type 'rlim_t' {aka 'long long unsigned int'} [-Werror=format=]
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ^~~~~~~~~~~~~~~~~~~~~~~
415 | rlim_new.rlim_cur, errno);
| ~~~~~~~~~~~~~~~~~
| |
| rlim_t {aka long long unsigned int}
./test_maps.h:12:24: note: in definition of macro 'CHECK'
12 | printf(format); \
| ^~~~~~
map_tests/sk_storage_map.c:414:68: note: format string is defined here
414 | CHECK(err, "setrlimit(RLIMIT_NOFILE)", "rlim_new:%lu errno:%d",
| ~~^
| |
| long unsigned int
| %llu
cc1: all warnings being treated as errors
Fixes: 51a0e301a563 ("bpf: Add BPF_MAP_TYPE_SK_STORAGE test to test_maps")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1e00a1fa7acf91b4ca135c4102dc796d518bad86.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 29 02:24:22 2024 -0700
selftests/bpf: Fix compile if backtrace support missing in libc
[ Upstream commit c9a83e76b5a96801a2c7ea0a79ca77c356d8b38d ]
Include GNU <execinfo.h> header only with glibc and provide weak, stubbed
backtrace functions as a fallback in test_progs.c. This allows for non-GNU
replacements while avoiding compile errors (e.g. with musl libc) like:
test_progs.c:13:10: fatal error: execinfo.h: No such file or directory
13 | #include <execinfo.h> /* backtrace */
| ^~~~~~~~~~~~
test_progs.c: In function 'crash_handler':
test_progs.c:1034:14: error: implicit declaration of function 'backtrace' [-Werror=implicit-function-declaration]
1034 | sz = backtrace(bt, ARRAY_SIZE(bt));
| ^~~~~~~~~
test_progs.c:1045:9: error: implicit declaration of function 'backtrace_symbols_fd' [-Werror=implicit-function-declaration]
1045 | backtrace_symbols_fd(bt, sz, STDERR_FILENO);
| ^~~~~~~~~~~~~~~~~~~~
Fixes: 9fb156bb82a3 ("selftests/bpf: Print backtrace on SIGSEGV in test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/aa6dc8e23710cb457b278039d0081de7e7b4847d.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:42 2024 -0700
selftests/bpf: Fix compiling core_reloc.c with musl-libc
[ Upstream commit debfa4f628f271f72933bf38d581cc53cfe1def5 ]
The type 'loff_t' is a GNU extension and not exposed by the musl 'fcntl.h'
header unless _GNU_SOURCE is defined. Add this definition to fix errors
seen compiling for mips64el/musl-libc:
In file included from tools/testing/selftests/bpf/prog_tests/core_reloc.c:4:
./bpf_testmod/bpf_testmod.h:10:9: error: unknown type name 'loff_t'
10 | loff_t off;
| ^~~~~~
./bpf_testmod/bpf_testmod.h:16:9: error: unknown type name 'loff_t'
16 | loff_t off;
| ^~~~~~
Fixes: 6bcd39d366b6 ("selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/11c3af75a7eb6bcb7ad9acfae6a6f470c572eb82.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:40 2024 -0700
selftests/bpf: Fix compiling flow_dissector.c with musl-libc
[ Upstream commit 5e4c43bcb85973243d7274e0058b6e8f5810e4f7 ]
The GNU version of 'struct tcphdr' has members 'doff', 'source' and 'dest',
which are not exposed by musl libc headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
flow_dissector.c:118:30: error: 'struct tcphdr' has no member named 'doff'
118 | .tcp.doff = 5,
| ^~~~
flow_dissector.c:119:30: error: 'struct tcphdr' has no member named 'source'
119 | .tcp.source = 80,
| ^~~~~~
flow_dissector.c:120:30: error: 'struct tcphdr' has no member named 'dest'
120 | .tcp.dest = 8080,
| ^~~~
Fixes: ae173a915785 ("selftests/bpf: support BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f7ab21a73f678f9cebd32b26c444a686e57414d.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:39 2024 -0700
selftests/bpf: Fix compiling kfree_skb.c with musl-libc
[ Upstream commit bae9a5ce7d3a9b3a9e07b31ab9e9c58450e3e9fd ]
The GNU version of 'struct tcphdr' with member 'doff' is not exposed by
musl headers unless _GNU_SOURCE is defined. Add this definition to fix
errors seen compiling for mips64el/musl-libc:
In file included from kfree_skb.c:2:
kfree_skb.c: In function 'on_sample':
kfree_skb.c:45:30: error: 'struct tcphdr' has no member named 'doff'
45 | if (CHECK(pkt_v6->tcp.doff != 5, "check_tcp",
| ^
Fixes: 580d656d80cf ("selftests/bpf: Add kfree_skb raw_tp test")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e2d8cedc790959c10d6822a51f01a7a3616bea1b.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:38 2024 -0700
selftests/bpf: Fix compiling parse_tcp_hdr_opt.c with musl-libc
[ Upstream commit 4c329b99ef9c118343379bde9f97e8ce5cac9fc9 ]
The GNU version of 'struct tcphdr', with members 'doff' and 'urg_ptr', is
not exposed by musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
parse_tcp_hdr_opt.c:18:21: error: 'struct tcphdr' has no member named 'urg_ptr'
18 | .pk6_v6.tcp.urg_ptr = 123,
| ^~~~~~~
parse_tcp_hdr_opt.c:19:21: error: 'struct tcphdr' has no member named 'doff'
19 | .pk6_v6.tcp.doff = 9, /* 16 bytes of options */
| ^~~~
Fixes: cfa7b011894d ("selftests/bpf: tests for using dynptrs to parse skb and xdp buffers")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/ac5440213c242c62cb4e0d9e0a9cd5058b6a31f6.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:41 2024 -0700
selftests/bpf: Fix compiling tcp_rtt.c with musl-libc
[ Upstream commit 18826fb0b79c3c3cd1fe765d85f9c6f1a902c722 ]
The GNU version of 'struct tcp_info' in 'netinet/tcp.h' is not exposed by
musl headers unless _GNU_SOURCE is defined.
Add this definition to fix errors seen compiling for mips64el/musl-libc:
tcp_rtt.c: In function 'wait_for_ack':
tcp_rtt.c:24:25: error: storage size of 'info' isn't known
24 | struct tcp_info info;
| ^~~~
tcp_rtt.c:24:25: error: unused variable 'info' [-Werror=unused-variable]
cc1: all warnings being treated as errors
Fixes: 1f4f80fed217 ("selftests/bpf: test_progs: convert test_tcp_rtt")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/f2329767b15df206f08a5776d35a47c37da855ae.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:30 2024 -0700
selftests/bpf: Fix error compiling bpf_iter_setsockopt.c with musl libc
[ Upstream commit 7b10f0c227ce3fa055d601f058dc411092a62a78 ]
Existing code calls getsockname() with a 'struct sockaddr_in6 *' argument
where a 'struct sockaddr *' argument is declared, yielding compile errors
when building for mips64el/musl-libc:
bpf_iter_setsockopt.c: In function 'get_local_port':
bpf_iter_setsockopt.c:98:30: error: passing argument 2 of 'getsockname' from incompatible pointer type [-Werror=incompatible-pointer-types]
98 | if (!getsockname(fd, &addr, &addrlen))
| ^~~~~
| |
| struct sockaddr_in6 *
In file included from .../netinet/in.h:10,
from .../arpa/inet.h:9,
from ./test_progs.h:17,
from bpf_iter_setsockopt.c:5:
.../sys/socket.h:391:23: note: expected 'struct sockaddr * restrict' but argument is of type 'struct sockaddr_in6 *'
391 | int getsockname (int, struct sockaddr *__restrict, socklen_t *__restrict);
| ^
cc1: all warnings being treated as errors
This compiled under glibc only because the argument is declared to be a
"funky" transparent union which includes both types above. Explicitly cast
the argument to allow compiling for both musl and glibc.
Fixes: eed92afdd14c ("bpf: selftest: Test batching and bpf_(get|set)sockopt in bpf tcp iter")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/f41def0f17b27a23b1709080e4e3f37f4cc11ca9.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 29 02:24:24 2024 -0700
selftests/bpf: Fix error compiling tc_redirect.c with musl libc
[ Upstream commit 21c5f4f55da759c7444a1ef13e90b6e6f674eeeb ]
Linux 5.1 implemented 64-bit time types and related syscalls to address the
Y2038 problem generally across archs. Userspace handling of Y2038 varies
with the libc however. While musl libc uses 64-bit time across all 32-bit
and 64-bit platforms, GNU glibc uses 64-bit time on 64-bit platforms but
defaults to 32-bit time on 32-bit platforms unless they "opt-in" to 64-bit
time or explicitly use 64-bit syscalls and time structures.
One specific area is the standard setsockopt() call, SO_TIMESTAMPNS option
used for timestamping, and the related output 'struct timespec'. GNU glibc
defaults as above, also exposing the SO_TIMESTAMPNS_NEW flag to explicitly
use a 64-bit call and 'struct __kernel_timespec'. Since these are not
exposed or needed with musl libc, their use in tc_redirect.c leads to
compile errors building for mips64el/musl:
tc_redirect.c: In function 'rcv_tstamp':
tc_redirect.c:425:32: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
425 | cmsg->cmsg_type == SO_TIMESTAMPNS_NEW)
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
tc_redirect.c:425:32: note: each undeclared identifier is reported only once for each function it appears in
tc_redirect.c: In function 'test_inet_dtime':
tc_redirect.c:491:49: error: 'SO_TIMESTAMPNS_NEW' undeclared (first use in this function); did you mean 'SO_TIMESTAMPNS'?
491 | err = setsockopt(listen_fd, SOL_SOCKET, SO_TIMESTAMPNS_NEW,
| ^~~~~~~~~~~~~~~~~~
| SO_TIMESTAMPNS
However, using SO_TIMESTAMPNS_NEW isn't strictly needed, nor is Y2038 being
explicitly tested. The timestamp checks in tc_redirect.c are simple: the
packet receive timestamp is non-zero and processed/handled in less than 5
seconds.
Switch to using the standard setsockopt() call and SO_TIMESTAMPNS option to
ensure compatibility across glibc and musl libc. In the worst-case, there
is a 5-second window 14 years from now where tc_redirect tests may fail on
32-bit systems. However, we should reasonably expect glibc to adopt a
64-bit mandate rather than the current "opt-in" policy before the Y2038
roll-over.
Fixes: ce6f6cffaeaa ("selftests/bpf: Wait for the netstamp_needed_key static key to be turned on")
Fixes: c803475fd8dd ("bpf: selftests: test skb->tstamp in redirect_neigh")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/031d656c058b4e55ceae56ef49c4e1729b5090f3.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 29 02:24:19 2024 -0700
selftests/bpf: Fix error compiling test_lru_map.c
[ Upstream commit cacf2a5a78cd1f5f616eae043ebc6f024104b721 ]
Although the post-increment in macro 'CPU_SET(next++, &cpuset)' seems safe,
the sequencing can raise compile errors, so move the increment outside the
macro. This avoids an error seen using gcc 12.3.0 for mips64el/musl-libc:
In file included from test_lru_map.c:11:
test_lru_map.c: In function 'sched_next_online':
test_lru_map.c:129:29: error: operation on 'next' may be undefined [-Werror=sequence-point]
129 | CPU_SET(next++, &cpuset);
| ^
cc1: all warnings being treated as errors
Fixes: 3fbfadce6012 ("bpf: Fix test_lru_sanity5() in test_lru_map.c")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/22993dfb11ccf27925a626b32672fd3324cb76c4.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 17:13:29 2024 -0700
selftests/bpf: Fix error linking uprobe_multi on mips
[ Upstream commit a5f40d596bff182b4b47547712f540885e8fb17b ]
Linking uprobe_multi.c on mips64el fails due to relocation overflows, when
the GOT entries required exceeds the default maximum. Add a specific CFLAGS
(-mxgot) for uprobe_multi.c on MIPS that allows using a larger GOT and
avoids errors such as:
/tmp/ccBTNQzv.o: in function `bench':
uprobe_multi.c:49:(.text+0x1d7720): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08188'
uprobe_multi.c:49:(.text+0x1d7730): relocation truncated to fit: R_MIPS_GOT_DISP against `uprobe_multi_func_08189'
...
collect2: error: ld returned 1 exit status
Fixes: 519dfeaf5119 ("selftests/bpf: Add uprobe_multi test program")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/14eb7b70f8ccef9834874d75eb373cb9292129da.1721692479.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:46 2024 -0700
selftests/bpf: Fix errors compiling cg_storage_multi.h with musl libc
[ Upstream commit 730561d3c08d4a327cceaabf11365958a1c00cec ]
Remove a redundant include of '<asm/types.h>', whose needed definitions are
already included (via '<linux/types.h>') in cg_storage_multi_egress_only.c,
cg_storage_multi_isolated.c, and cg_storage_multi_shared.c. This avoids
redefinition errors seen compiling for mips64el/musl-libc like:
In file included from progs/cg_storage_multi_egress_only.c:13:
In file included from progs/cg_storage_multi.h:6:
In file included from /usr/mips64el-linux-gnuabi64/include/asm/types.h:23:
/usr/include/asm-generic/int-l64.h:29:25: error: typedef redefinition with different types ('long' vs 'long long')
29 | typedef __signed__ long __s64;
| ^
/usr/include/asm-generic/int-ll64.h:30:44: note: previous definition is here
30 | __extension__ typedef __signed__ long long __s64;
| ^
Fixes: 9e5bd1f7633b ("selftests/bpf: Test CGROUP_STORAGE map can't be used by multiple progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/4f4702e9f6115b7f84fea01b2326ca24c6df7ba8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:45 2024 -0700
selftests/bpf: Fix errors compiling crypto_sanity.c with musl libc
[ Upstream commit 9822be702fe6e1c3e0933ef4b68a8c56683d930d ]
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/crypto_sanity.c:10:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from crypto_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 91541ab192fc ("selftests: bpf: crypto skcipher algo selftests")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://lore.kernel.org/bpf/911293968f424ad7b462d8805aeb3baee8f4985b.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:44 2024 -0700
selftests/bpf: Fix errors compiling decap_sanity.c with musl libc
[ Upstream commit 1b00f355130a5dfc38a01ad02458ae2cb2ebe609 ]
Remove a redundant include of '<linux/in6.h>', whose needed definitions are
already provided by 'test_progs.h'. This avoids errors seen compiling for
mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from ./test_progs.h:17,
from prog_tests/decap_sanity.c:9:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from decap_sanity.c:7:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 70a00e2f1dba ("selftests/bpf: Test bpf_skb_adjust_room on CHECKSUM_PARTIAL")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e986ba2d7edccd254b54f7cd049b98f10bafa8c3.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:43 2024 -0700
selftests/bpf: Fix errors compiling lwt_redirect.c with musl libc
[ Upstream commit 27c4797ce51c8dd51e35e68e9024a892f62d78b2 ]
Remove a redundant include of '<linux/icmp.h>' which is already provided in
'lwt_helpers.h'. This avoids errors seen compiling for mips64el/musl-libc:
In file included from .../arpa/inet.h:9,
from lwt_redirect.c:51:
.../netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../linux/icmp.h:24,
from lwt_redirect.c:50:
.../linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
Fixes: 43a7c3ef8a15 ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/3869dda876d5206d2f8d4dd67331c739ceb0c7f8.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:37 2024 -0700
selftests/bpf: Fix include of <sys/fcntl.h>
[ Upstream commit 21f0b0af977203220ad58aff95e372151288ec47 ]
Update ns_current_pid_tgid.c to use '#include <fcntl.h>' and avoid compile
error against mips64el/musl libc:
In file included from .../prog_tests/ns_current_pid_tgid.c:14:
.../include/sys/fcntl.h:1:2: error: #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h> [-Werror=cpp]
1 | #warning redirecting incorrect #include <sys/fcntl.h> to <fcntl.h>
| ^~~~~~~
cc1: all warnings being treated as errors
Fixes: 09c02d553c49 ("bpf, selftests: Fold test_current_pid_tgid_new_ns into test_progs.")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8bdc869749177b575025bf69600a4ce591822609.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hao Ge <gehao@kylinos.cn>
Date: Tue Aug 20 10:36:22 2024 +0800
selftests/bpf: Fix incorrect parameters in NULL pointer checking
[ Upstream commit c264487e5410e5a72db8a414566ab7d144223e6c ]
Smatch reported the following warning:
./tools/testing/selftests/bpf/testing_helpers.c:455 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 454)
It seems correct,so let's modify it based on it's suggestion.
Actually,commit b23ed4d74c4d ("selftests/bpf: Fix invalid pointer
check in get_xlated_program()") fixed an issue in the test_verifier.c
once,but it was reverted this time.
Let's solve this issue with the minimal changes possible.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/1eb3732f-605a-479d-ba64-cd14250cbf91@stanley.mountain/
Fixes: b4b7a4099b8c ("selftests/bpf: Factor out get_xlated_program() helper")
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Link: https://lore.kernel.org/r/20240820023622.29190-1-hao.ge@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:34 2024 -0700
selftests/bpf: Fix missing ARRAY_SIZE() definition in bench.c
[ Upstream commit d44c93fc2f5a0c47b23fa03d374e45259abd92d2 ]
Add a "bpf_util.h" include to avoid the following error seen compiling for
mips64el with musl libc:
bench.c: In function 'find_benchmark':
bench.c:590:25: error: implicit declaration of function 'ARRAY_SIZE' [-Werror=implicit-function-declaration]
590 | for (i = 0; i < ARRAY_SIZE(benchs); i++) {
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: 8e7c2a023ac0 ("selftests/bpf: Add benchmark runner infrastructure")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bc4dde77dfcd17a825d8f28f72f3292341966810.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:36 2024 -0700
selftests/bpf: Fix missing BUILD_BUG_ON() declaration
[ Upstream commit 6495eb79ca7d15bd87c38d77307e8f9b6b7bf4ef ]
Explicitly include '<linux/build_bug.h>' to fix errors seen compiling with
gcc targeting mips64el/musl-libc:
user_ringbuf.c: In function 'test_user_ringbuf_loop':
user_ringbuf.c:426:9: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
426 | BUILD_BUG_ON(total_samples <= c_max_entries);
| ^~~~~~~~~~~~
cc1: all warnings being treated as errors
Fixes: e5a9df51c746 ("selftests/bpf: Add selftests validating the user ringbuf")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b28575f9221ec54871c46a2e87612bb4bbf46ccd.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:35 2024 -0700
selftests/bpf: Fix missing UINT_MAX definitions in benchmarks
[ Upstream commit a2c155131b710959beb508ca6a54769b6b1bd488 ]
Include <limits.h> in 'bench.h' to provide a UINT_MAX definition and avoid
multiple compile errors against mips64el/musl-libc like:
benchs/bench_local_storage.c: In function 'parse_arg':
benchs/bench_local_storage.c:40:38: error: 'UINT_MAX' undeclared (first use in this function)
40 | if (ret < 1 || ret > UINT_MAX) {
| ^~~~~~~~
benchs/bench_local_storage.c:11:1: note: 'UINT_MAX' is defined in header '<limits.h>'; did you forget to '#include <limits.h>'?
10 | #include <test_btf.h>
+++ |+#include <limits.h>
11 |
seen with bench_local_storage.c, bench_local_storage_rcu_tasks_trace.c, and
bench_bpf_hashmap_lookup.c.
Fixes: 73087489250d ("selftests/bpf: Add benchmark for local_storage get")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8f64a9d9fcff40a7fca090a65a68a9b62a468e16.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 29 02:24:21 2024 -0700
selftests/bpf: Fix redefinition errors compiling lwt_reroute.c
[ Upstream commit 16b795cc59528cf280abc79af3c70bda42f715b9 ]
Compiling lwt_reroute.c with GCC 12.3 for mips64el/musl-libc yields errors:
In file included from .../include/arpa/inet.h:9,
from ./test_progs.h:18,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:11,
from tools/testing/selftests/bpf/prog_tests/lwt_reroute.c:52:
.../include/netinet/in.h:23:8: error: redefinition of 'struct in6_addr'
23 | struct in6_addr {
| ^~~~~~~~
In file included from .../include/linux/icmp.h:24,
from tools/testing/selftests/bpf/prog_tests/lwt_helpers.h:9:
.../include/linux/in6.h:33:8: note: originally defined here
33 | struct in6_addr {
| ^~~~~~~~
.../include/netinet/in.h:34:8: error: redefinition of 'struct sockaddr_in6'
34 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/linux/in6.h:50:8: note: originally defined here
50 | struct sockaddr_in6 {
| ^~~~~~~~~~~~
.../include/netinet/in.h:42:8: error: redefinition of 'struct ipv6_mreq'
42 | struct ipv6_mreq {
| ^~~~~~~~~
.../include/linux/in6.h:60:8: note: originally defined here
60 | struct ipv6_mreq {
| ^~~~~~~~~
These errors occur because <linux/in6.h> is included before <netinet/in.h>,
bypassing the Linux uapi/libc compat mechanism's partial musl support. As
described in [1] and [2], fix these errors by including <netinet/in.h> in
lwt_reroute.c before any uapi headers.
[1]: commit c0bace798436 ("uapi libc compat: add fallback for unsupported libcs")
[2]: https://git.musl-libc.org/cgit/musl/commit/?id=04983f227238
Fixes: 6c77997bc639 ("selftests/bpf: Add lwt_xmit tests for BPF_REROUTE")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/bd2908aec0755ba8b75f5dc41848b00585f5c73e.1722244708.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Tue Aug 20 03:23:51 2024 -0700
selftests/bpf: fix to avoid __msg tag de-duplication by clang
[ Upstream commit f00bb757ed630affc951691ddaff206039cbb7ee ]
__msg, __regex and __xlated tags are based on
__attribute__((btf_decl_tag("..."))) annotations.
Clang de-duplicates such annotations, e.g. the following
two sequences of tags are identical in final BTF:
/* seq A */ /* seq B */
__tag("foo") __tag("foo")
__tag("bar") __tag("bar")
__tag("foo")
Fix this by adding a unique suffix for each tag using __COUNTER__
pre-processor macro. E.g. here is a new definition for __msg:
#define __msg(msg) \
__attribute__((btf_decl_tag("comment:test_expect_msg=" XSTR(__COUNTER__) "=" msg)))
Using this definition the "seq A" from example above is translated to
BTF as follows:
[..] DECL_TAG 'comment:test_expect_msg=0=foo' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=1=bar' type_id=X component_idx=-1
[..] DECL_TAG 'comment:test_expect_msg=2=foo' type_id=X component_idx=-1
Surprisingly, this bug affects a single existing test:
verifier_spill_fill/old_stack_misc_vs_cur_ctx_ptr,
where sequence of identical messages was expected in the log.
Fixes: 537c3f66eac1 ("selftests/bpf: add generic BPF program tester-loader")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240820102357.3372779-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Fri Jul 19 22:25:35 2024 -0700
selftests/bpf: Fix wrong binary in Makefile log output
[ Upstream commit 3ece93a4087b2db7b99ebb2412bd60cf26bbbb51 ]
Make log output incorrectly shows 'test_maps' as the binary name for every
'CLNG-BPF' build step, apparently picking up the last value defined for the
$(TRUNNER_BINARY) variable. Update the 'CLANG_BPF_BUILD_RULE' variants to
fix this confusing output.
Current output:
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_maps] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
After fix:
CLNG-BPF [test_progs] access_map_in_map.bpf.o
GEN-SKEL [test_progs] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-no_alu32] access_map_in_map.bpf.o
GEN-SKEL [test_progs-no_alu32] access_map_in_map.skel.h
...
CLNG-BPF [test_progs-cpuv4] access_map_in_map.bpf.o
GEN-SKEL [test_progs-cpuv4] access_map_in_map.skel.h
Fixes: a5d0c26a2784 ("selftests/bpf: Add a cpuv4 test runner for cpu=v4 testing")
Fixes: 89ad7420b25c ("selftests/bpf: Drop the need for LLVM's llc")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240720052535.2185967-1-tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eduard Zingerman <eddyz87@gmail.com>
Date: Mon Jul 22 16:38:40 2024 -0700
selftests/bpf: no need to track next_match_pos in struct test_loader
[ Upstream commit 4ef5d6af493558124b7a6c13cace58b938fe27d4 ]
The call stack for validate_case() function looks as follows:
- test_loader__run_subtests()
- process_subtest()
- run_subtest()
- prepare_case(), which does 'tester->next_match_pos = 0';
- validate_case(), which increments tester->next_match_pos.
Hence, each subtest is run with next_match_pos freshly set to zero.
Meaning that there is no need to persist this variable in the
struct test_loader, use local variable instead.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240722233844.1406874-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Cupertino Miranda <cupertino.miranda@oracle.com>
Date: Mon Jun 17 15:14:57 2024 +0100
selftests/bpf: Support checks against a regular expression
[ Upstream commit f06ae6194f278444201e0b041a00192d794f83b6 ]
Add support for __regex and __regex_unpriv macros to check the test
execution output against a regular expression. This is similar to __msg
and __msg_unpriv, however those expect do substring matching.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240617141458.471620-2-cupertino.miranda@oracle.com
Stable-dep-of: f00bb757ed63 ("selftests/bpf: fix to avoid __msg tag de-duplication by clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 22:54:28 2024 -0700
selftests/bpf: Use pid_t consistently in test_progs.c
[ Upstream commit ec4fe2f0fa12fd2d0115df7e58414dc26899cc5e ]
Use pid_t rather than __pid_t when allocating memory for 'worker_pids' in
'struct test_env', as this is its declared type and also avoids compile
errors seen building against musl libc on mipsel64:
test_progs.c:1738:49: error: '__pid_t' undeclared (first use in this function); did you mean 'pid_t'?
1738 | env.worker_pids = calloc(sizeof(__pid_t), env.workers);
| ^~~~~~~
| pid_t
test_progs.c:1738:49: note: each undeclared identifier is reported only once for each function it appears in
Fixes: 91b2c0afd00c ("selftests/bpf: Add parallelism to test_progs")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Geliang Tang <geliang@kernel.org>
Link: https://lore.kernel.org/bpf/c6447da51a94babc1931711a43e2ceecb135c93d.1721713597.git.tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexei Starovoitov <ast@kernel.org>
Date: Mon Jul 22 19:08:15 2024 -0700
selftests/bpf: Workaround strict bpf_lsm return value check.
[ Upstream commit aa8ebb270c66cea1f56a25d0f938036e91ad085a ]
test_progs-no_alu32 -t libbpf_get_fd_by_id_opts
is being rejected by the verifier with the following error
due to compiler optimization:
6: (67) r0 <<= 62 ; R0_w=scalar(smax=0x4000000000000000,umax=0xc000000000000000,smin32=0,smax32=umax32=0,var_off=(0x0; 0xc000000000000000))
7: (c7) r0 s>>= 63 ; R0_w=scalar(smin=smin32=-1,smax=smax32=0)
; @ test_libbpf_get_fd_by_id_opts.c:0
8: (57) r0 &= -13 ; R0_w=scalar(smax=0x7ffffffffffffff3,umax=0xfffffffffffffff3,smax32=0x7ffffff3,umax32=0xfffffff3,var_off=(0x0; 0xfffffffffffffff3))
; int BPF_PROG(check_access, struct bpf_map *map, fmode_t fmode) @ test_libbpf_get_fd_by_id_opts.c:27
9: (95) exit
At program exit the register R0 has smax=9223372036854775795 should have been in [-4095, 0]
Workaround by adding barrier().
Eventually the verifier will be able to recognize it.
Fixes: 5d99e198be27 ("bpf, lsm: Add check for BPF LSM return value")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date: Thu Jun 13 07:12:10 2024 +0900
selftests/ftrace: Add required dependency for kprobe tests
[ Upstream commit 41f37c852ac3fbfd072a00281b60dc7ba056be8c ]
kprobe_args_{char,string}.tc are using available_filter_functions file
which is provided by function tracer. Thus if function tracer is disabled,
these tests are failed on recent kernels because tracefs_create_dir is
not raised events by adding a dynamic event.
Add available_filter_functions to requires line.
Fixes: 7c1130ea5cae ("test: ftrace: Fix kprobe test for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Date: Thu Sep 5 00:30:21 2024 +0900
selftests/ftrace: Fix eventfs ownership testcase to find mount point
[ Upstream commit f0a6ecebd858658df213d114b0530f8f0b96e396 ]
Fix eventfs ownership testcase to find mount point if stat -c "%m" failed.
This can happen on the system based on busybox. In this case, this will
try to use the current working directory, which should be a tracefs top
directory (and eventfs is mounted as a part of tracefs.)
If it does not work, the test is skipped as UNRESOLVED because of
the environmental problem.
Fixes: ee9793be08b1 ("tracing/selftests: Add ownership modification tests for eventfs")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt (Google) <rostedt@goodmis.org>
Date: Wed May 15 01:36:20 2024 -0400
selftests/ftrace: Fix test to handle both old and new kernels
[ Upstream commit c049acee3c71cfc26c739f82617a84e13e471a45 ]
The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef9f ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Phil Sutter <phil@nwl.cc>
Date: Thu Sep 19 14:40:00 2024 +0200
selftests: netfilter: Avoid hanging ipvs.sh
[ Upstream commit fc786304ad9803e8bb86b8599bc64d1c1746c75f ]
If the client can't reach the server, the latter remains listening
forever. Kill it after 5s of waiting.
Fixes: 867d2190799a ("selftests: netfilter: add ipvs test script")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shuah Khan <skhan@linuxfoundation.org>
Date: Thu Sep 5 12:02:31 2024 -0600
selftests:resctrl: Fix build failure on archs without __cpuid_count()
[ Upstream commit 7beaf1da074f7ea25454d6c11da142c3892d3c4e ]
When resctrl is built on architectures without __cpuid_count()
support, build fails. resctrl uses __cpuid_count() defined in
kselftest.h.
Even though the problem is seen while building resctrl on aarch64,
this error can be seen on any platform that doesn't support CPUID.
CPUID is a x86/x86-64 feature and code paths with CPUID asm commands
will fail to build on all other architectures.
All others tests call __cpuid_count() do so from x86/x86_64 code paths
when _i386__ or __x86_64__ are defined. resctrl is an exception.
Fix the problem by defining __cpuid_count() only when __i386__ or
__x86_64__ are defined in kselftest.h and changing resctrl to call
__cpuid_count() only when __i386__ or __x86_64__ are defined.
In file included from resctrl.h:24,
from cat_test.c:11:
In function ‘arch_supports_noncont_cat’,
inlined from ‘noncont_cat_run_test’ at cat_test.c:326:6:
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:304:17: note: in expansion of macro ‘__cpuid_count’
304 | __cpuid_count(0x10, 1, eax, ebx, ecx, edx);
| ^~~~~~~~~~~~~
../kselftest.h:74:9: error: impossible constraint in ‘asm’
74 | __asm__ __volatile__ ("cpuid\n\t" \
| ^~~~~~~
cat_test.c:306:17: note: in expansion of macro ‘__cpuid_count’
306 | __cpuid_count(0x10, 2, eax, ebx, ecx, edx);
Fixes: ae638551ab64 ("selftests/resctrl: Add non-contiguous CBMs CAT test")
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Closes: https://lore.kernel.org/lkml/20240809071059.265914-1-usama.anjum@collabora.com/
Reported-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Markus Schneider-Pargmann <msp@baylibre.com>
Date: Wed Aug 7 16:12:25 2024 +0200
serial: 8250: omap: Cleanup on error in request_irq
[ Upstream commit 35e648a16018b747897be2ccc3ce95ff23237bb5 ]
If devm_request_irq fails, the code does not cleanup many things that
were setup before. Instead of directly returning ret we should jump to
err.
Fixes: fef4f600319e ("serial: 8250: omap: Fix life cycle issues for interrupt handlers")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20240807141227.1093006-4-msp@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Date: Mon Aug 5 12:20:36 2024 +0200
serial: don't use uninitialized value in uart_poll_init()
commit d0009a32c9e4e083358092f3c97e3c6e803a8930 upstream.
Coverity reports (as CID 1536978) that uart_poll_init() passes
uninitialized pm_state to uart_change_pm(). It is in case the first 'if'
takes the true branch (does "goto out;").
Fix this and simplify the function by simple guard(mutex). The code
needs no labels after this at all. And it is pretty clear that the code
has not fiddled with pm_state at that point.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: 5e227ef2aa38 (serial: uart_poll_init() should power on the UART)
Cc: stable@vger.kernel.org
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240805102046.307511-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Fri Sep 6 15:13:32 2024 +0200
serial: qcom-geni: fix arg types for qcom_geni_serial_poll_bit()
[ Upstream commit c2eaf5e01275ae13f1ec5b1434f6c49cfff57430 ]
The "offset" passed in should be unsigned since it's always a positive
offset from our memory mapped IO.
The "field" should be u32 since we're anding it with a 32-bit value
read from the device.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240610152420.v4.4.I24a0de52dd7336908df180fa6b698e001f3aff82@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: cc4a0e5754a1 ("serial: qcom-geni: fix console corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Fri Sep 6 15:13:34 2024 +0200
serial: qcom-geni: fix console corruption
[ Upstream commit cc4a0e5754a16bbc1e215c091349a7c83a2c5e14 ]
The Qualcomm serial console implementation is broken and can lose
characters when the serial port is also used for tty output.
Specifically, the console code only waits for the current tx command to
complete when all data has already been written to the fifo. When there
are on-going longer transfers this often means that console output is
lost when the console code inadvertently "hijacks" the current tx
command instead of starting a new one.
This can, for example, be observed during boot when console output that
should have been interspersed with init output is truncated:
[ 9.462317] qcom-snps-eusb2-hsphy fde000.phy: Registered Qcom-eUSB2 phy
[ OK ] Found device KBG50ZNS256G KIOXIA Wi[ 9.471743ndows.
[ 9.539915] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Add a new state variable to track how much data has been written to the
fifo and use it to determine when the fifo and shift register are both
empty. This is needed since there is currently no other known way to
determine when the shift register is empty.
This in turn allows the console code to interrupt long transfers without
losing data.
Note that the oops-in-progress case is similarly broken as it does not
cancel any active command and also waits for the wrong status flag when
attempting to drain the fifo (TX_FIFO_NOT_EMPTY_EN is only set when
cancelling a command leaves data in the fifo).
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Fixes: a1fee899e5be ("tty: serial: qcom_geni_serial: Fix softlock")
Fixes: 9e957a155005 ("serial: qcom-geni: Don't cancel/abort if we can't get the port lock")
Cc: stable@vger.kernel.org # 4.17
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Fri Sep 6 15:13:30 2024 +0200
serial: qcom-geni: fix false console tx restart
commit f97cdbbf187fefcf1fe19689cd9fdca11fe9c3eb upstream.
Commit 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang")
addressed an issue with stalled tx after the console code interrupted
the last bytes of a tx command by reenabling the watermark interrupt if
there is data in write buffer. This can however break software flow
control by re-enabling tx after the user has stopped it.
Address the original issue by not clearing the CMD_DONE flag after
polling for command completion. This allows the interrupt handler to
start another transfer when the CMD_DONE interrupt has not been disabled
due to flow control.
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Fixes: 663abb1a7a7f ("tty: serial: qcom_geni_serial: Fix UART hang")
Cc: stable@vger.kernel.org # 4.17
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan+linaro@kernel.org>
Date: Fri Sep 6 15:13:29 2024 +0200
serial: qcom-geni: fix fifo polling timeout
commit c80ee36ac8f9e9c27d8e097a2eaaf198e7534c83 upstream.
The qcom_geni_serial_poll_bit() can be used to wait for events like
command completion and is supposed to wait for the time it takes to
clear a full fifo before timing out.
As noted by Doug, the current implementation does not account for start,
stop and parity bits when determining the timeout. The helper also does
not currently account for the shift register and the two-word
intermediate transfer register.
A too short timeout can specifically lead to lost characters when
waiting for a transfer to complete as the transfer is cancelled on
timeout.
Instead of determining the poll timeout on every call, store the fifo
timeout when updating it in set_termios() and make sure to take the
shift and intermediate registers into account. Note that serial core has
already added a 20 ms margin to the fifo timeout.
Also note that the current uart_fifo_timeout() interface does
unnecessary calculations on every call and did not exist in earlier
kernels so only store its result once. This facilitates backports too as
earlier kernels can derive the timeout from uport->timeout, which has
since been removed.
Fixes: c4f528795d1a ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable@vger.kernel.org # 4.17
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Fri Sep 6 15:13:33 2024 +0200
serial: qcom-geni: introduce qcom_geni_serial_poll_bitfield()
[ Upstream commit b26d1ad1221273c88c2c4f5b4080338b8ca23859 ]
With a small modification the qcom_geni_serial_poll_bit() function
could be used to poll more than just a single bit. Let's generalize
it. We'll make the qcom_geni_serial_poll_bit() into just a wrapper of
the general function.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240610152420.v4.5.Ic6411eab8d9d37acc451705f583fb535cd6dadb2@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: cc4a0e5754a1 ("serial: qcom-geni: fix console corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiawei Ye <jiawei.ye@foxmail.com>
Date: Mon Sep 2 08:47:26 2024 +0000
smackfs: Use rcu_assign_pointer() to ensure safe assignment in smk_set_cipso
[ Upstream commit 2749749afa071f8a0e405605de9da615e771a7ce ]
In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat`
field is directly assigned to a new value without using the appropriate
RCU pointer assignment functions. According to RCU usage rules, this is
illegal and can lead to unpredictable behavior, including data
inconsistencies and impossible-to-diagnose memory corruption issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the assignment is now done using rcu_assign_pointer(),
which ensures that the pointer assignment is done safely, with the
necessary memory barriers and synchronization. This change prevents
potential RCU dereference issues by ensuring that the `cat` field is
safely updated while still adhering to RCU's requirements.
Fixes: 0817534ff9ea ("smackfs: Fix use-after-free in netlbl_catmap_walk()")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Herve Codina <herve.codina@bootlin.com>
Date: Thu Aug 8 09:10:54 2024 +0200
soc: fsl: cpm1: qmc: Update TRNSYNC only in transparent mode
commit c3cc3e69b33fee3d276895e0e2d1a8fb37ea5d0e upstream.
The TRNSYNC feature is available (and enabled) only in transparent mode.
Since commit 7cc9bda9c163 ("soc: fsl: cpm1: qmc: Handle timeslot entries
at channel start() and stop()") TRNSYNC register is updated in
transparent and hdlc mode. In hdlc mode, the address of the TRNSYNC
register is used by the QMC for other internal purpose. Even if no weird
results were observed in hdlc mode, touching this register in this mode
is wrong.
Update TRNSYNC only in transparent mode.
Fixes: 7cc9bda9c163 ("soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop()")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-2-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Herve Codina <herve.codina@bootlin.com>
Date: Thu Aug 8 09:10:56 2024 +0200
soc: fsl: cpm1: tsa: Fix tsa_write8()
commit 47a347bae9a491b467ab3543e4725a3e4fbe30f5 upstream.
The tsa_write8() parameter is an u32 value. This is not consistent with
the function itself. Indeed, tsa_write8() writes an 8bits value.
Be consistent and use an u8 parameter value.
Fixes: 1d4ba0b81c1c ("soc: fsl: cpm1: Add support for TSA")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20240808071132.149251-4-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Douglas Anderson <dianders@chromium.org>
Date: Fri Sep 6 15:13:31 2024 +0200
soc: qcom: geni-se: add GP_LENGTH/IRQ_EN_SET/IRQ_EN_CLEAR registers
[ Upstream commit b03ffc76b83c1a7d058454efbcf1bf0e345ef1c2 ]
For UART devices the M_GP_LENGTH is the TX word count. For other
devices this is the transaction word count.
For UART devices the S_GP_LENGTH is the RX word count.
The IRQ_EN set/clear registers allow you to set or clear bits in the
IRQ_EN register without needing a read-modify-write.
Acked-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240610152420.v4.1.Ife7ced506aef1be3158712aa3ff34a006b973559@changeid
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240906131336.23625-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: cc4a0e5754a1 ("serial: qcom-geni: fix console corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Aug 25 20:05:22 2024 +0200
soc: versatile: integrator: fix OF node leak in probe() error path
commit 874c5b601856adbfda10846b9770a6c66c41e229 upstream.
Driver is leaking OF node reference obtained from
of_find_matching_node().
Fixes: f956a785a282 ("soc: move SoC driver for the ARM Integrator")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-1-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Aug 25 20:05:23 2024 +0200
soc: versatile: realview: fix memory leak during device remove
[ Upstream commit 1c4f26a41f9d052f334f6ae629e01f598ed93508 ]
If device is unbound, the memory allocated for soc_dev_attr should be
freed to prevent leaks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-2-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Stable-dep-of: c774f2564c00 ("soc: versatile: realview: fix soc_dev leak during device remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Aug 25 20:05:24 2024 +0200
soc: versatile: realview: fix soc_dev leak during device remove
[ Upstream commit c774f2564c0086c23f5269fd4691f233756bf075 ]
If device is unbound, the soc_dev should be unregistered to prevent
memory leak.
Fixes: a2974c9c1f83 ("soc: add driver for the ARM RealView")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-3-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Sep 6 15:44:49 2024 +0000
sock_map: Add a cond_resched() in sock_hash_free()
[ Upstream commit b1339be951ad31947ae19bc25cb08769bf255100 ]
Several syzbot soft lockup reports all have in common sock_hash_free()
If a map with a large number of buckets is destroyed, we need to yield
the cpu when needed.
Fixes: 75e68e5bf2c7 ("bpf, sockhash: Synchronize delete from bucket list on map free")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240906154449.3742932-1-edumazet@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Fri Sep 13 23:07:14 2024 +0200
spi: airoha: fix airoha_snand_{write,read}_data data_len estimation
[ Upstream commit 0e58637eb968c636725dcd6c7055249b4e5326fb ]
Fix data length written and read in airoha_snand_write_data and
airoha_snand_read_data routines respectively if it is bigger than
SPI_MAX_TRANSFER_SIZE.
Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-2-de2e74ed4664@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Fri Sep 13 23:07:13 2024 +0200
spi: airoha: fix dirmap_{read,write} operations
[ Upstream commit 2e6bbfe7b0c0607001b784082c2685b134174fac ]
SPI_NFI_READ_FROM_CACHE_DONE bit must be written at the end of
dirmap_read operation even if it is already set.
In the same way, SPI_NFI_LOAD_TO_CACHE_DONE bit must be written at the
end of dirmap_write operation even if it is already set.
For this reason use regmap_write_bits() instead of regmap_set_bits().
This patch fixes mtd_pagetest kernel module test.
Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240913-airoha-spi-fixes-v1-1-de2e74ed4664@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lorenzo Bianconi <lorenzo@kernel.org>
Date: Thu Sep 19 18:57:16 2024 +0200
spi: airoha: remove read cache in airoha_snand_dirmap_read()
[ Upstream commit fffca269e4f31c3633c6d810833ba1b184407915 ]
Current upstream driver reports errors running mtd_oobtest kernel module
test:
root@OpenWrt:/# insmod mtd_test.ko
root@OpenWrt:/# insmod mtd_oobtest.ko dev=5
[ 7023.730584] =================================================
[ 7023.736399] mtd_oobtest: MTD device: 5
[ 7023.740160] mtd_oobtest: MTD device size 3670016, eraseblock size 131072, page size 2048, count of eraseblocks 28, pages per eraseblock 64, OOB size 128
[ 7023.753837] mtd_test: scanning for bad eraseblocks
[ 7023.758636] mtd_test: scanned 28 eraseblocks, 0 are bad
[ 7023.763861] mtd_oobtest: test 1 of 5
[ 7024.042076] mtd_oobtest: writing OOBs of whole device
[ 7024.682069] mtd_oobtest: written up to eraseblock 0
[ 7041.962077] mtd_oobtest: written 28 eraseblocks
[ 7041.966626] mtd_oobtest: verifying all eraseblocks
[ 7041.972276] mtd_oobtest: error @addr[0x0:0x0] 0xff -> 0xe diff 0xf1
[ 7041.978550] mtd_oobtest: error @addr[0x0:0x1] 0xff -> 0x10 diff 0xef
[ 7041.984932] mtd_oobtest: error @addr[0x0:0x2] 0xff -> 0x82 diff 0x7d
[ 7041.991293] mtd_oobtest: error @addr[0x0:0x3] 0xff -> 0x10 diff 0xef
[ 7041.997659] mtd_oobtest: error @addr[0x0:0x4] 0xff -> 0x0 diff 0xff
[ 7042.003942] mtd_oobtest: error @addr[0x0:0x5] 0xff -> 0x8a diff 0x75
[ 7042.010294] mtd_oobtest: error @addr[0x0:0x6] 0xff -> 0x20 diff 0xdf
[ 7042.016659] mtd_oobtest: error @addr[0x0:0x7] 0xff -> 0x1 diff 0xfe
[ 7042.022935] mtd_oobtest: error @addr[0x0:0x8] 0xff -> 0x2e diff 0xd1
[ 7042.029295] mtd_oobtest: error @addr[0x0:0x9] 0xff -> 0x40 diff 0xbf
[ 7042.035661] mtd_oobtest: error @addr[0x0:0xa] 0xff -> 0x0 diff 0xff
[ 7042.041935] mtd_oobtest: error @addr[0x0:0xb] 0xff -> 0x89 diff 0x76
[ 7042.048300] mtd_oobtest: error @addr[0x0:0xc] 0xff -> 0x82 diff 0x7d
[ 7042.054662] mtd_oobtest: error @addr[0x0:0xd] 0xff -> 0x15 diff 0xea
[ 7042.061014] mtd_oobtest: error @addr[0x0:0xe] 0xff -> 0x90 diff 0x6f
[ 7042.067380] mtd_oobtest: error @addr[0x0:0xf] 0xff -> 0x0 diff 0xff
....
[ 7432.421369] mtd_oobtest: error @addr[0x237800:0x36] 0xff -> 0x5f diff 0xa0
[ 7432.428242] mtd_oobtest: error @addr[0x237800:0x37] 0xff -> 0x21 diff 0xde
[ 7432.435118] mtd_oobtest: error: verify failed at 0x237800
[ 7432.440510] mtd_oobtest: error: too many errors
[ 7432.445053] mtd_oobtest: error -1 occurred
The above errors are due to the buggy logic in the 'read cache' available
in airoha_snand_dirmap_read() routine since there are some corner cases
where we are missing data updates. Since we do not get any read/write speed
improvement using the cache (according to the mtd_speedtest kernel
module test), in order to fix the mtd_oobtest test, remove the 'read cache'
in airoha_snand_dirmap_read routine. Now the driver is passing all the
tests available in mtd_test suite.
Fixes: a403997c1201 ("spi: airoha: add SPI-NAND Flash controller driver")
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240919-airoha-spi-fixes-v2-1-cb0f0ed9920a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Dahl <ada@thorsis.com>
Date: Wed Sep 18 10:27:43 2024 +0200
spi: atmel-quadspi: Avoid overwriting delay register settings
[ Upstream commit 329ca3eed4a9a161515a8714be6ba182321385c7 ]
Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).
All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.
Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing(). The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first. All writes to MR
did not consider possible settings of DLYCS and DLYBCT.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0ccd ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexander Dahl <ada@thorsis.com>
Date: Thu Sep 26 11:03:56 2024 +0200
spi: atmel-quadspi: Fix wrong register value written to MR
commit 162d9b5d2308c7e48efbc97d36babbf4d73b2c61 upstream.
aq->mr should go to MR, nothing else.
Fixes: 329ca3eed4a9 ("spi: atmel-quadspi: Avoid overwriting delay register settings")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://lore.kernel.org/linux-spi/20240926-macarena-wincing-7c4995487a29@thorsis.com/T/#u
Link: https://patch.msgid.link/20240926090356.105789-1-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Fri Sep 6 10:39:56 2024 +0800
spi: atmel-quadspi: Undo runtime PM changes at driver exit time
[ Upstream commit 438efb23f9581659495b85f1f6c7d5946200660c ]
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 4a2f83b7f780 ("spi: atmel-quadspi: add runtime pm support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906023956.1004440-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Mon Aug 26 20:49:02 2024 +0800
spi: bcmbca-hsspi: Fix missing pm_runtime_disable()
[ Upstream commit 4439a2e92cb89028b22c5d7ba1b99e75d7d889f6 ]
The pm_runtime_disable() is missing in remove function, use
devm_pm_runtime_enable() to fix it. So the pm_runtime_disable() in
the probe error path can also be removed.
Fixes: a38a2233f23b ("spi: bcmbca-hsspi: Add driver for newer HSSPI controller")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://patch.msgid.link/20240826124903.3429235-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Haibo Chen <haibo.chen@nxp.com>
Date: Thu Sep 5 17:43:37 2024 +0800
spi: fspi: add support for imx8ulp
commit 9228956a620553d7fd17f703a37a26c91e4d92ab upstream.
The flexspi on imx8ulp only has 16 LUTs, different with others which
have up to 32 LUTs.
Add a separate compatible string and nxp_fspi_devtype_data to support
flexspi on imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-4-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Haibo Chen <haibo.chen@nxp.com>
Date: Thu Sep 5 17:43:36 2024 +0800
spi: fspi: involve lut_num for struct nxp_fspi_devtype_data
commit 190b7e2efb1ed8435fc7431d9c7a2447d05d5066 upstream.
The flexspi on different SoCs may have different number of LUTs.
So involve lut_num in nxp_fspi_devtype_data to make distinguish.
This patch prepare for the adding of imx8ulp.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: stable@kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240905094338.1986871-3-haibo.chen@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed Aug 14 17:45:12 2024 +0300
spi: ppc4xx: Avoid returning 0 when failed to parse and map IRQ
[ Upstream commit 7781f1d120fec8624fc654eda900fc8748262082 ]
0 is incorrect error code when failed to parse and map IRQ.
Replace OF specific old API for IRQ retrieval with a generic
one to fix this issue.
Fixes: 0f245463b01e ("spi: ppc4xx: handle irq_of_parse_and_map() errors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240814144525.2648450-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Wed Jul 24 16:40:47 2024 +0800
spi: ppc4xx: handle irq_of_parse_and_map() errors
[ Upstream commit 0f245463b01ea254ae90e1d0389e90b0e7d8dc75 ]
Zero and negative number is not a valid IRQ for in-kernel code and the
irq_of_parse_and_map() function returns zero on error. So this check for
valid IRQs should only accept values > 0.
Fixes: 44dab88e7cc9 ("spi: add spi_ppc4xx driver")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240724084047.1506084-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jinjie Ruan <ruanjinjie@huawei.com>
Date: Fri Sep 6 10:12:51 2024 +0800
spi: spi-fsl-lpspi: Undo runtime PM changes at driver exit time
[ Upstream commit 3b577de206d52dbde9428664b6d823d35a803d75 ]
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, call pm_runtime_dont_use_autosuspend() at driver exit time
to fix it.
Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240906021251.610462-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Josh Hunt <johunt@akamai.com>
Date: Tue Sep 10 15:08:22 2024 -0400
tcp: check skb is non-NULL in tcp_rto_delta_us()
[ Upstream commit c8770db2d54437a5f49417ae7b46f7de23d14db6 ]
We have some machines running stock Ubuntu 20.04.6 which is their 5.4.0-174-generic
kernel that are running ceph and recently hit a null ptr dereference in
tcp_rearm_rto(). Initially hitting it from the TLP path, but then later we also
saw it getting hit from the RACK case as well. Here are examples of the oops
messages we saw in each of those cases:
Jul 26 15:05:02 rx [11061395.780353] BUG: kernel NULL pointer dereference, address: 0000000000000020
Jul 26 15:05:02 rx [11061395.787572] #PF: supervisor read access in kernel mode
Jul 26 15:05:02 rx [11061395.792971] #PF: error_code(0x0000) - not-present page
Jul 26 15:05:02 rx [11061395.798362] PGD 0 P4D 0
Jul 26 15:05:02 rx [11061395.801164] Oops: 0000 [#1] SMP NOPTI
Jul 26 15:05:02 rx [11061395.805091] CPU: 0 PID: 9180 Comm: msgr-worker-1 Tainted: G W 5.4.0-174-generic #193-Ubuntu
Jul 26 15:05:02 rx [11061395.814996] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023
Jul 26 15:05:02 rx [11061395.825952] RIP: 0010:tcp_rearm_rto+0xe4/0x160
Jul 26 15:05:02 rx [11061395.830656] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3
Jul 26 15:05:02 rx [11061395.849665] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246
Jul 26 15:05:02 rx [11061395.855149] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000
Jul 26 15:05:02 rx [11061395.862542] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60
Jul 26 15:05:02 rx [11061395.869933] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8
Jul 26 15:05:02 rx [11061395.877318] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900
Jul 26 15:05:02 rx [11061395.884710] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30
Jul 26 15:05:02 rx [11061395.892095] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000
Jul 26 15:05:02 rx [11061395.900438] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 26 15:05:02 rx [11061395.906435] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0
Jul 26 15:05:02 rx [11061395.913822] PKRU: 55555554
Jul 26 15:05:02 rx [11061395.916786] Call Trace:
Jul 26 15:05:02 rx [11061395.919488]
Jul 26 15:05:02 rx [11061395.921765] ? show_regs.cold+0x1a/0x1f
Jul 26 15:05:02 rx [11061395.925859] ? __die+0x90/0xd9
Jul 26 15:05:02 rx [11061395.929169] ? no_context+0x196/0x380
Jul 26 15:05:02 rx [11061395.933088] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0
Jul 26 15:05:02 rx [11061395.938216] ? ip6_sublist_rcv_finish+0x3d/0x50
Jul 26 15:05:02 rx [11061395.943000] ? __bad_area_nosemaphore+0x50/0x1a0
Jul 26 15:05:02 rx [11061395.947873] ? bad_area_nosemaphore+0x16/0x20
Jul 26 15:05:02 rx [11061395.952486] ? do_user_addr_fault+0x267/0x450
Jul 26 15:05:02 rx [11061395.957104] ? ipv6_list_rcv+0x112/0x140
Jul 26 15:05:02 rx [11061395.961279] ? __do_page_fault+0x58/0x90
Jul 26 15:05:02 rx [11061395.965458] ? do_page_fault+0x2c/0xe0
Jul 26 15:05:02 rx [11061395.969465] ? page_fault+0x34/0x40
Jul 26 15:05:02 rx [11061395.973217] ? tcp_rearm_rto+0xe4/0x160
Jul 26 15:05:02 rx [11061395.977313] ? tcp_rearm_rto+0xe4/0x160
Jul 26 15:05:02 rx [11061395.981408] tcp_send_loss_probe+0x10b/0x220
Jul 26 15:05:02 rx [11061395.985937] tcp_write_timer_handler+0x1b4/0x240
Jul 26 15:05:02 rx [11061395.990809] tcp_write_timer+0x9e/0xe0
Jul 26 15:05:02 rx [11061395.994814] ? tcp_write_timer_handler+0x240/0x240
Jul 26 15:05:02 rx [11061395.999866] call_timer_fn+0x32/0x130
Jul 26 15:05:02 rx [11061396.003782] __run_timers.part.0+0x180/0x280
Jul 26 15:05:02 rx [11061396.008309] ? recalibrate_cpu_khz+0x10/0x10
Jul 26 15:05:02 rx [11061396.012841] ? native_x2apic_icr_write+0x30/0x30
Jul 26 15:05:02 rx [11061396.017718] ? lapic_next_event+0x21/0x30
Jul 26 15:05:02 rx [11061396.021984] ? clockevents_program_event+0x8f/0xe0
Jul 26 15:05:02 rx [11061396.027035] run_timer_softirq+0x2a/0x50
Jul 26 15:05:02 rx [11061396.031212] __do_softirq+0xd1/0x2c1
Jul 26 15:05:02 rx [11061396.035044] do_softirq_own_stack+0x2a/0x40
Jul 26 15:05:02 rx [11061396.039480]
Jul 26 15:05:02 rx [11061396.041840] do_softirq.part.0+0x46/0x50
Jul 26 15:05:02 rx [11061396.046022] __local_bh_enable_ip+0x50/0x60
Jul 26 15:05:02 rx [11061396.050460] _raw_spin_unlock_bh+0x1e/0x20
Jul 26 15:05:02 rx [11061396.054817] nf_conntrack_tcp_packet+0x29e/0xbe0 [nf_conntrack]
Jul 26 15:05:02 rx [11061396.060994] ? get_l4proto+0xe7/0x190 [nf_conntrack]
Jul 26 15:05:02 rx [11061396.066220] nf_conntrack_in+0xe9/0x670 [nf_conntrack]
Jul 26 15:05:02 rx [11061396.071618] ipv6_conntrack_local+0x14/0x20 [nf_conntrack]
Jul 26 15:05:02 rx [11061396.077356] nf_hook_slow+0x45/0xb0
Jul 26 15:05:02 rx [11061396.081098] ip6_xmit+0x3f0/0x5d0
Jul 26 15:05:02 rx [11061396.084670] ? ipv6_anycast_cleanup+0x50/0x50
Jul 26 15:05:02 rx [11061396.089282] ? __sk_dst_check+0x38/0x70
Jul 26 15:05:02 rx [11061396.093381] ? inet6_csk_route_socket+0x13b/0x200
Jul 26 15:05:02 rx [11061396.098346] inet6_csk_xmit+0xa7/0xf0
Jul 26 15:05:02 rx [11061396.102263] __tcp_transmit_skb+0x550/0xb30
Jul 26 15:05:02 rx [11061396.106701] tcp_write_xmit+0x3c6/0xc20
Jul 26 15:05:02 rx [11061396.110792] ? __alloc_skb+0x98/0x1d0
Jul 26 15:05:02 rx [11061396.114708] __tcp_push_pending_frames+0x37/0x100
Jul 26 15:05:02 rx [11061396.119667] tcp_push+0xfd/0x100
Jul 26 15:05:02 rx [11061396.123150] tcp_sendmsg_locked+0xc70/0xdd0
Jul 26 15:05:02 rx [11061396.127588] tcp_sendmsg+0x2d/0x50
Jul 26 15:05:02 rx [11061396.131245] inet6_sendmsg+0x43/0x70
Jul 26 15:05:02 rx [11061396.135075] __sock_sendmsg+0x48/0x70
Jul 26 15:05:02 rx [11061396.138994] ____sys_sendmsg+0x212/0x280
Jul 26 15:05:02 rx [11061396.143172] ___sys_sendmsg+0x88/0xd0
Jul 26 15:05:02 rx [11061396.147098] ? __seccomp_filter+0x7e/0x6b0
Jul 26 15:05:02 rx [11061396.151446] ? __switch_to+0x39c/0x460
Jul 26 15:05:02 rx [11061396.155453] ? __switch_to_asm+0x42/0x80
Jul 26 15:05:02 rx [11061396.159636] ? __switch_to_asm+0x5a/0x80
Jul 26 15:05:02 rx [11061396.163816] __sys_sendmsg+0x5c/0xa0
Jul 26 15:05:02 rx [11061396.167647] __x64_sys_sendmsg+0x1f/0x30
Jul 26 15:05:02 rx [11061396.171832] do_syscall_64+0x57/0x190
Jul 26 15:05:02 rx [11061396.175748] entry_SYSCALL_64_after_hwframe+0x5c/0xc1
Jul 26 15:05:02 rx [11061396.181055] RIP: 0033:0x7f1ef692618d
Jul 26 15:05:02 rx [11061396.184893] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ca ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 2f 44 89 c7 48 89 44 24 08 e8 fe ee ff ff 48
Jul 26 15:05:02 rx [11061396.203889] RSP: 002b:00007f1ef4a26aa0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e
Jul 26 15:05:02 rx [11061396.211708] RAX: ffffffffffffffda RBX: 000000000000084b RCX: 00007f1ef692618d
Jul 26 15:05:02 rx [11061396.219091] RDX: 0000000000004000 RSI: 00007f1ef4a26b10 RDI: 0000000000000275
Jul 26 15:05:02 rx [11061396.226475] RBP: 0000000000004000 R08: 0000000000000000 R09: 0000000000000020
Jul 26 15:05:02 rx [11061396.233859] R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000084b
Jul 26 15:05:02 rx [11061396.241243] R13: 00007f1ef4a26b10 R14: 0000000000000275 R15: 000055592030f1e8
Jul 26 15:05:02 rx [11061396.248628] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler nft_ct sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 mlx5_core hid_generic pci_hyperv_intf crc32_pclmul tls usbhid ahci mlxfw bnxt_en libahci hid nvme i2c_piix4 nvme_core wmi
Jul 26 15:05:02 rx [11061396.324334] CR2: 0000000000000020
Jul 26 15:05:02 rx [11061396.327944] ---[ end trace 68a2b679d1cfb4f1 ]---
Jul 26 15:05:02 rx [11061396.433435] RIP: 0010:tcp_rearm_rto+0xe4/0x160
Jul 26 15:05:02 rx [11061396.438137] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3
Jul 26 15:05:02 rx [11061396.457144] RSP: 0018:ffffb75d40003e08 EFLAGS: 00010246
Jul 26 15:05:02 rx [11061396.462629] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000
Jul 26 15:05:02 rx [11061396.470012] RDX: 0000000062177c30 RSI: 000000000000231c RDI: ffff9874ad283a60
Jul 26 15:05:02 rx [11061396.477396] RBP: ffffb75d40003e20 R08: 0000000000000000 R09: ffff987605e20aa8
Jul 26 15:05:02 rx [11061396.484779] R10: ffffb75d40003f00 R11: ffffb75d4460f740 R12: ffff9874ad283900
Jul 26 15:05:02 rx [11061396.492164] R13: ffff9874ad283a60 R14: ffff9874ad283980 R15: ffff9874ad283d30
Jul 26 15:05:02 rx [11061396.499547] FS: 00007f1ef4a2e700(0000) GS:ffff987605e00000(0000) knlGS:0000000000000000
Jul 26 15:05:02 rx [11061396.507886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 26 15:05:02 rx [11061396.513884] CR2: 0000000000000020 CR3: 0000003e450ba003 CR4: 0000000000760ef0
Jul 26 15:05:02 rx [11061396.521267] PKRU: 55555554
Jul 26 15:05:02 rx [11061396.524230] Kernel panic - not syncing: Fatal exception in interrupt
Jul 26 15:05:02 rx [11061396.530885] Kernel Offset: 0x1b200000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Jul 26 15:05:03 rx [11061396.660181] ---[ end Kernel panic - not syncing: Fatal
exception in interrupt ]---
After we hit this we disabled TLP by setting tcp_early_retrans to 0 and then hit the crash in the RACK case:
Aug 7 07:26:16 rx [1006006.265582] BUG: kernel NULL pointer dereference, address: 0000000000000020
Aug 7 07:26:16 rx [1006006.272719] #PF: supervisor read access in kernel mode
Aug 7 07:26:16 rx [1006006.278030] #PF: error_code(0x0000) - not-present page
Aug 7 07:26:16 rx [1006006.283343] PGD 0 P4D 0
Aug 7 07:26:16 rx [1006006.286057] Oops: 0000 [#1] SMP NOPTI
Aug 7 07:26:16 rx [1006006.289896] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.4.0-174-generic #193-Ubuntu
Aug 7 07:26:16 rx [1006006.299107] Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023
Aug 7 07:26:16 rx [1006006.309970] RIP: 0010:tcp_rearm_rto+0xe4/0x160
Aug 7 07:26:16 rx [1006006.314584] Code: 87 ca 04 00 00 00 5b 41 5c 41 5d 5d c3 c3 49 8b bc 24 40 06 00 00 eb 8d 48 bb cf f7 53 e3 a5 9b c4 20 4c 89 ef e8 0c fe 0e 00 <48> 8b 78 20 48 c1 ef 03 48 89 f8 41 8b bc 24 80 04 00 00 48 f7 e3
Aug 7 07:26:16 rx [1006006.333499] RSP: 0018:ffffb42600a50960 EFLAGS: 00010246
Aug 7 07:26:16 rx [1006006.338895] RAX: 0000000000000000 RBX: 20c49ba5e353f7cf RCX: 0000000000000000
Aug 7 07:26:16 rx [1006006.346193] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff92d687ed8160
Aug 7 07:26:16 rx [1006006.353489] RBP: ffffb42600a50978 R08: 0000000000000000 R09: 00000000cd896dcc
Aug 7 07:26:16 rx [1006006.360786] R10: ffff92dc3404f400 R11: 0000000000000001 R12: ffff92d687ed8000
Aug 7 07:26:16 rx [1006006.368084] R13: ffff92d687ed8160 R14: 00000000cd896dcc R15: 00000000cd8fca81
Aug 7 07:26:16 rx [1006006.375381] FS: 0000000000000000(0000) GS:ffff93158ad40000(0000) knlGS:0000000000000000
Aug 7 07:26:16 rx [1006006.383632] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Aug 7 07:26:16 rx [1006006.389544] CR2: 0000000000000020 CR3: 0000003e775ce006 CR4: 0000000000760ee0
Aug 7 07:26:16 rx [1006006.396839] PKRU: 55555554
Aug 7 07:26:16 rx [1006006.399717] Call Trace:
Aug 7 07:26:16 rx [1006006.402335]
Aug 7 07:26:16 rx [1006006.404525] ? show_regs.cold+0x1a/0x1f
Aug 7 07:26:16 rx [1006006.408532] ? __die+0x90/0xd9
Aug 7 07:26:16 rx [1006006.411760] ? no_context+0x196/0x380
Aug 7 07:26:16 rx [1006006.415599] ? __bad_area_nosemaphore+0x50/0x1a0
Aug 7 07:26:16 rx [1006006.420392] ? _raw_spin_lock+0x1e/0x30
Aug 7 07:26:16 rx [1006006.424401] ? bad_area_nosemaphore+0x16/0x20
Aug 7 07:26:16 rx [1006006.428927] ? do_user_addr_fault+0x267/0x450
Aug 7 07:26:16 rx [1006006.433450] ? __do_page_fault+0x58/0x90
Aug 7 07:26:16 rx [1006006.437542] ? do_page_fault+0x2c/0xe0
Aug 7 07:26:16 rx [1006006.441470] ? page_fault+0x34/0x40
Aug 7 07:26:16 rx [1006006.445134] ? tcp_rearm_rto+0xe4/0x160
Aug 7 07:26:16 rx [1006006.449145] tcp_ack+0xa32/0xb30
Aug 7 07:26:16 rx [1006006.452542] tcp_rcv_established+0x13c/0x670
Aug 7 07:26:16 rx [1006006.456981] ? sk_filter_trim_cap+0x48/0x220
Aug 7 07:26:16 rx [1006006.461419] tcp_v6_do_rcv+0xdb/0x450
Aug 7 07:26:16 rx [1006006.465257] tcp_v6_rcv+0xc2b/0xd10
Aug 7 07:26:16 rx [1006006.468918] ip6_protocol_deliver_rcu+0xd3/0x4e0
Aug 7 07:26:16 rx [1006006.473706] ip6_input_finish+0x15/0x20
Aug 7 07:26:16 rx [1006006.477710] ip6_input+0xa2/0xb0
Aug 7 07:26:16 rx [1006006.481109] ? ip6_protocol_deliver_rcu+0x4e0/0x4e0
Aug 7 07:26:16 rx [1006006.486151] ip6_sublist_rcv_finish+0x3d/0x50
Aug 7 07:26:16 rx [1006006.490679] ip6_sublist_rcv+0x1aa/0x250
Aug 7 07:26:16 rx [1006006.494779] ? ip6_rcv_finish_core.isra.0+0xa0/0xa0
Aug 7 07:26:16 rx [1006006.499828] ipv6_list_rcv+0x112/0x140
Aug 7 07:26:16 rx [1006006.503748] __netif_receive_skb_list_core+0x1a4/0x250
Aug 7 07:26:16 rx [1006006.509057] netif_receive_skb_list_internal+0x1a1/0x2b0
Aug 7 07:26:16 rx [1006006.514538] gro_normal_list.part.0+0x1e/0x40
Aug 7 07:26:16 rx [1006006.519068] napi_complete_done+0x91/0x130
Aug 7 07:26:16 rx [1006006.523352] mlx5e_napi_poll+0x18e/0x610 [mlx5_core]
Aug 7 07:26:16 rx [1006006.528481] net_rx_action+0x142/0x390
Aug 7 07:26:16 rx [1006006.532398] __do_softirq+0xd1/0x2c1
Aug 7 07:26:16 rx [1006006.536142] irq_exit+0xae/0xb0
Aug 7 07:26:16 rx [1006006.539452] do_IRQ+0x5a/0xf0
Aug 7 07:26:16 rx [1006006.542590] common_interrupt+0xf/0xf
Aug 7 07:26:16 rx [1006006.546421]
Aug 7 07:26:16 rx [1006006.548695] RIP: 0010:native_safe_halt+0xe/0x10
Aug 7 07:26:16 rx [1006006.553399] Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65
Aug 7 07:26:16 rx [1006006.572309] RSP: 0018:ffffb42600177e70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffc2
Aug 7 07:26:16 rx [1006006.580040] RAX: ffffffff8ed08b20 RBX: 0000000000000005 RCX: 0000000000000001
Aug 7 07:26:16 rx [1006006.587337] RDX: 00000000f48eeca2 RSI: 0000000000000082 RDI: 0000000000000082
Aug 7 07:26:16 rx [1006006.594635] RBP: ffffb42600177e90 R08: 0000000000000000 R09: 000000000000020f
Aug 7 07:26:16 rx [1006006.601931] R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000005
Aug 7 07:26:16 rx [1006006.609229] R13: ffff93157deb5f00 R14: 0000000000000000 R15: 0000000000000000
Aug 7 07:26:16 rx [1006006.616530] ? __cpuidle_text_start+0x8/0x8
Aug 7 07:26:16 rx [1006006.620886] ? default_idle+0x20/0x140
Aug 7 07:26:16 rx [1006006.624804] arch_cpu_idle+0x15/0x20
Aug 7 07:26:16 rx [1006006.628545] default_idle_call+0x23/0x30
Aug 7 07:26:16 rx [1006006.632640] do_idle+0x1fb/0x270
Aug 7 07:26:16 rx [1006006.636035] cpu_startup_entry+0x20/0x30
Aug 7 07:26:16 rx [1006006.640126] start_secondary+0x178/0x1d0
Aug 7 07:26:16 rx [1006006.644218] secondary_startup_64+0xa4/0xb0
Aug 7 07:26:17 rx [1006006.648568] Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif input_leds joydev rndis_host cdc_ether usbnet ast mii drm_vram_helper ttm drm_kms_helper i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt ccp mac_hid ipmi_si ipmi_devintf ipmi_msghandler sch_fq_codel nf_tables_set nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink ramoops reed_solomon efi_pstore drm ip_tables x_tables autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid0 multipath linear mlx5_ib ib_uverbs ib_core raid1 hid_generic mlx5_core pci_hyperv_intf crc32_pclmul usbhid ahci tls mlxfw bnxt_en hid libahci nvme i2c_piix4 nvme_core wmi [last unloaded: cpuid]
Aug 7 07:26:17 rx [1006006.726180] CR2: 0000000000000020
Aug 7 07:26:17 rx [1006006.729718] ---[ end trace e0e2e37e4e612984 ]---
Prior to seeing the first crash and on other machines we also see the warning in
tcp_send_loss_probe() where packets_out is non-zero, but both transmit and retrans
queues are empty so we know the box is seeing some accounting issue in this area:
Jul 26 09:15:27 kernel: ------------[ cut here ]------------
Jul 26 09:15:27 kernel: invalid inflight: 2 state 1 cwnd 68 mss 8988
Jul 26 09:15:27 kernel: WARNING: CPU: 16 PID: 0 at net/ipv4/tcp_output.c:2605 tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: Modules linked in: vrf bridge stp llc vxlan ip6_udp_tunnel udp_tunnel nls_iso8859_1 nft_ct amd64_edac_mod edac_mce_amd kvm_amd kvm crct10dif_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper wmi_bmof ipmi_ssif joydev input_leds rndis_host cdc_ether usbnet mii ast drm_vram_helper ttm drm_kms_he>
Jul 26 09:15:27 kernel: CPU: 16 PID: 0 Comm: swapper/16 Not tainted 5.4.0-174-generic #193-Ubuntu
Jul 26 09:15:27 kernel: Hardware name: Supermicro SMC 2x26 os-gen8 64C NVME-Y 256G/H12SSW-NTR, BIOS 2.5.V1.2U.NVMe.UEFI 05/09/2023
Jul 26 09:15:27 kernel: RIP: 0010:tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: Code: 08 26 01 00 75 e2 41 0f b6 54 24 12 41 8b 8c 24 c0 06 00 00 45 89 f0 48 c7 c7 e0 b4 20 a7 c6 05 8d 08 26 01 01 e8 4a c0 0f 00 <0f> 0b eb ba 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
Jul 26 09:15:27 kernel: RSP: 0018:ffffb7838088ce00 EFLAGS: 00010286
Jul 26 09:15:27 kernel: RAX: 0000000000000000 RBX: ffff9b84b5630430 RCX: 0000000000000006
Jul 26 09:15:27 kernel: RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9b8e4621c8c0
Jul 26 09:15:27 kernel: RBP: ffffb7838088ce18 R08: 0000000000000927 R09: 0000000000000004
Jul 26 09:15:27 kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff9b84b5630000
Jul 26 09:15:27 kernel: R13: 0000000000000000 R14: 000000000000231c R15: ffff9b84b5630430
Jul 26 09:15:27 kernel: FS: 0000000000000000(0000) GS:ffff9b8e46200000(0000) knlGS:0000000000000000
Jul 26 09:15:27 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Jul 26 09:15:27 kernel: CR2: 000056238cec2380 CR3: 0000003e49ede005 CR4: 0000000000760ee0
Jul 26 09:15:27 kernel: PKRU: 55555554
Jul 26 09:15:27 kernel: Call Trace:
Jul 26 09:15:27 kernel: <IRQ>
Jul 26 09:15:27 kernel: ? show_regs.cold+0x1a/0x1f
Jul 26 09:15:27 kernel: ? __warn+0x98/0xe0
Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: ? report_bug+0xd1/0x100
Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0
Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50
Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30
Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240
Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0
Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240
Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130
Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280
Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0
Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90
Jul 26 09:15:27 kernel: ? do_error_trap+0x9b/0xc0
Jul 26 09:15:27 kernel: ? do_invalid_op+0x3c/0x50
Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: ? invalid_op+0x1e/0x30
Jul 26 09:15:27 kernel: ? tcp_send_loss_probe+0x214/0x220
Jul 26 09:15:27 kernel: tcp_write_timer_handler+0x1b4/0x240
Jul 26 09:15:27 kernel: tcp_write_timer+0x9e/0xe0
Jul 26 09:15:27 kernel: ? tcp_write_timer_handler+0x240/0x240
Jul 26 09:15:27 kernel: call_timer_fn+0x32/0x130
Jul 26 09:15:27 kernel: __run_timers.part.0+0x180/0x280
Jul 26 09:15:27 kernel: ? timerqueue_add+0x9b/0xb0
Jul 26 09:15:27 kernel: ? enqueue_hrtimer+0x3d/0x90
Jul 26 09:15:27 kernel: ? recalibrate_cpu_khz+0x10/0x10
Jul 26 09:15:27 kernel: ? ktime_get+0x3e/0xa0
Jul 26 09:15:27 kernel: ? native_x2apic_icr_write+0x30/0x30
Jul 26 09:15:27 kernel: run_timer_softirq+0x2a/0x50
Jul 26 09:15:27 kernel: __do_softirq+0xd1/0x2c1
Jul 26 09:15:27 kernel: irq_exit+0xae/0xb0
Jul 26 09:15:27 kernel: smp_apic_timer_interrupt+0x7b/0x140
Jul 26 09:15:27 kernel: apic_timer_interrupt+0xf/0x20
Jul 26 09:15:27 kernel: </IRQ>
Jul 26 09:15:27 kernel: RIP: 0010:native_safe_halt+0xe/0x10
Jul 26 09:15:27 kernel: Code: 7b ff ff ff eb bd 90 90 90 90 90 90 e9 07 00 00 00 0f 00 2d 36 2c 50 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d 26 2c 50 00 fb f4 <c3> 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 e8 dd 5e 61 ff 65
Jul 26 09:15:27 kernel: RSP: 0018:ffffb783801cfe70 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
Jul 26 09:15:27 kernel: RAX: ffffffffa6908b20 RBX: 0000000000000010 RCX: 0000000000000001
Jul 26 09:15:27 kernel: RDX: 000000006fc0c97e RSI: 0000000000000082 RDI: 0000000000000082
Jul 26 09:15:27 kernel: RBP: ffffb783801cfe90 R08: 0000000000000000 R09: 0000000000000225
Jul 26 09:15:27 kernel: R10: 0000000000100000 R11: 0000000000000000 R12: 0000000000000010
Jul 26 09:15:27 kernel: R13: ffff9b8e390b0000 R14: 0000000000000000 R15: 0000000000000000
Jul 26 09:15:27 kernel: ? __cpuidle_text_start+0x8/0x8
Jul 26 09:15:27 kernel: ? default_idle+0x20/0x140
Jul 26 09:15:27 kernel: arch_cpu_idle+0x15/0x20
Jul 26 09:15:27 kernel: default_idle_call+0x23/0x30
Jul 26 09:15:27 kernel: do_idle+0x1fb/0x270
Jul 26 09:15:27 kernel: cpu_startup_entry+0x20/0x30
Jul 26 09:15:27 kernel: start_secondary+0x178/0x1d0
Jul 26 09:15:27 kernel: secondary_startup_64+0xa4/0xb0
Jul 26 09:15:27 kernel: ---[ end trace e7ac822987e33be1 ]---
The NULL ptr deref is coming from tcp_rto_delta_us() attempting to pull an skb
off the head of the retransmit queue and then dereferencing that skb to get the
skb_mstamp_ns value via tcp_skb_timestamp_us(skb).
The crash is the same one that was reported a # of years ago here:
https://lore.kernel.org/netdev/86c0f836-9a7c-438b-d81a-839be45f1f58@gmail.com/T/#t
and the kernel we're running has the fix which was added to resolve this issue.
Unfortunately we've been unsuccessful so far in reproducing this problem in the
lab and do not have the luxury of pushing out a new kernel to try and test if
newer kernels resolve this issue at the moment. I realize this is a report
against both an Ubuntu kernel and also an older 5.4 kernel. I have reported this
issue to Ubuntu here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2077657
however I feel like since this issue has possibly cropped up again it makes
sense to build in some protection in this path (even on the latest kernel
versions) since the code in question just blindly assumes there's a valid skb
without testing if it's NULL b/f it looks at the timestamp.
Given we have seen crashes in this path before and now this case it seems like
we should protect ourselves for when packets_out accounting is incorrect.
While we should fix that root cause we should also just make sure the skb
is not NULL before dereferencing it. Also add a warn once here to capture
some information if/when the problem case is hit again.
Fixes: e1a10ef7fa87 ("tcp: introduce tcp_rto_delta_us() helper for xmit timer fix")
Signed-off-by: Josh Hunt <johunt@akamai.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Thu Aug 22 21:47:36 2024 +0200
thermal: core: Fix rounding of delay jiffies
[ Upstream commit 8144dbe68c493baa412d78f41a57e90a6461f6c3 ]
Using round_jiffies() in thermal_set_delay_jiffies() is invalid because
its argument should be time in the future in absolute jiffies and it
computes the result with respect to the current jiffies value at the
invocation time. Fortunately, in the majority of cases it does not
make any difference due to the time_is_after_jiffies() check in
round_jiffies_common().
While using round_jiffies_relative() instead of round_jiffies() might
reflect the intent a bit better, it still would not be defensible
because that function should be called when the timer is about to be
set and it is not suitable for pre-computation of delay values.
Accordingly, drop thermal_set_delay_jiffies() altogether, simply
convert polling_delay and passive_delay to jiffies during thermal
zone initialization and make thermal_zone_device_set_polling() call
round_jiffies_relative() on the delay if it is greather than 1 second.
Fixes: 17d399cd9c89 ("thermal/core: Precompute the delays from msecs to jiffies")
Fixes: e5f2cda61d06 ("thermal/core: Move thermal_set_delay_jiffies to static")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1994438.PYKUYFuaPT@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Mon Aug 19 17:50:30 2024 +0200
thermal: core: Fold two functions into their respective callers
[ Upstream commit a8bbe6f10f78f85243ff821432c5d798a6d99ed4 ]
Fold bind_cdev() into __thermal_cooling_device_register() and bind_tz()
into thermal_zone_device_register_with_trips() to reduce code bloat and
make it somewhat easier to follow the code flow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/2962184.e9J7NaK4W3@rjwysocki.net
Stable-dep-of: 8144dbe68c49 ("thermal: core: Fix rounding of delay jiffies")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Mon Aug 26 18:23:49 2024 +0200
thermal: gov_bang_bang: Adjust states of all uninitialized instances
[ Upstream commit 15cb56bd529868d9242b22812fc69bd144bfdc94 ]
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes: 5f64b4a1ab1b ("thermal: gov_bang_bang: Add .manage() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6103874.lOV4Wx5bFT@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Weißschuh <linux@weissschuh.net>
Date: Thu Jul 25 18:54:18 2024 +0200
tools/nolibc: include arch.h from string.h
commit 6ea2987c9a7b6c5f37d08a3eaa664c9ff7467670 upstream.
string.h tests for the macros NOLIBC_ARCH_HAS_$FUNC to use the
architecture-optimized function variants.
However if string.h is included before arch.h header then that check
does not work, leading to duplicate function definitions.
Fixes: 553845eebd60 ("tools/nolibc: x86-64: Use `rep movsb` for `memcpy()` and `memmove()`")
Fixes: 12108aa8c1a1 ("tools/nolibc: x86-64: Use `rep stosb` for `memset()`")
Cc: stable@vger.kernel.org
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240725-arch-has-func-v1-1-5521ed354acd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tony Ambardar <tony.ambardar@gmail.com>
Date: Mon Jul 22 17:30:45 2024 -0700
tools/runqslower: Fix LDFLAGS and add LDLIBS support
[ Upstream commit f86601c3661946721e8f260bdd812b759854ac22 ]
Actually use previously defined LDFLAGS during build and add support for
LDLIBS to link extra standalone libraries e.g. 'argp' which is not provided
by musl libc.
Fixes: 585bf4640ebe ("tools: runqslower: Add EXTRA_CFLAGS and EXTRA_LDFLAGS support")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20240723003045.2273499-1-tony.ambardar@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonathan McDowell <noodles@meta.com>
Date: Fri Aug 16 12:55:46 2024 +0100
tpm: Clean up TPM space after command failure
[ Upstream commit e3aaebcbb7c6b403416f442d1de70d437ce313a7 ]
tpm_dev_transmit prepares the TPM space before attempting command
transmission. However if the command fails no rollback of this
preparation is done. This can result in transient handles being leaked
if the device is subsequently closed with no further commands performed.
Fix this by flushing the space in the event of command transmission
failure.
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces")
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kexy Biscuit <kexybiscuit@aosc.io>
Date: Mon Sep 9 20:28:30 2024 +0300
tpm: export tpm2_sessions_init() to fix ibmvtpm building
commit f168c000d27f8134160d4a52dfc474a948a3d7e9 upstream.
Commit 08d08e2e9f0a ("tpm: ibmvtpm: Call tpm2_sessions_init() to
initialize session support") adds call to tpm2_sessions_init() in ibmvtpm,
which could be built as a module. However, tpm2_sessions_init() wasn't
exported, causing libmvtpm to fail to build as a module:
ERROR: modpost: "tpm2_sessions_init" [drivers/char/tpm/tpm_ibmvtpm.ko] undefined!
Export tpm2_sessions_init() to resolve the issue.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408051735.ZJkAPQ3b-lkp@intel.com/
Fixes: 08d08e2e9f0a ("tpm: ibmvtpm: Call tpm2_sessions_init() to initialize session support")
Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io>
Signed-off-by: Mingcong Bai <jeffbai@aosc.io>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Florian Fainelli <florian.fainelli@broadcom.com>
Date: Fri Sep 6 15:54:33 2024 -0700
tty: rp2: Fix reset with non forgiving PCIe host bridges
commit f16dd10ba342c429b1e36ada545fb36d4d1f0e63 upstream.
The write to RP2_GLOBAL_CMD followed by an immediate read of
RP2_GLOBAL_CMD in rp2_reset_asic() is intented to flush out the write,
however by then the device is already in reset and cannot respond to a
memory cycle access.
On platforms such as the Raspberry Pi 4 and others using the
pcie-brcmstb.c driver, any memory access to a device that cannot respond
is met with a fatal system error, rather than being substituted with all
1s as is usually the case on PC platforms.
Swapping the delay and the read ensures that the device has finished
resetting before we attempt to read from it.
Fixes: 7d9f49afa451 ("serial: rp2: New driver for Comtrol RocketPort 2 cards")
Cc: stable <stable@kernel.org>
Suggested-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240906225435.707837-1-florian.fainelli@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ming Lei <ming.lei@redhat.com>
Date: Mon Aug 12 09:36:24 2024 +0800
ublk: move zone report data out of request pdu
[ Upstream commit 9327b51c9a9c864f5177127e09851da9d78b4943 ]
ublk zoned takes 16 bytes in each request pdu just for handling REPORT_ZONE
operation, this way does waste memory since request pdu is allocated
statically.
Store the transient zone report data into one global xarray, and remove
it after the report zone request is completed. This way is reasonable
since report zone is run in slow code path.
Fixes: 29802d7ca33b ("ublk: enable zoned storage support")
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240812013624.587587-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Thu Sep 12 14:32:59 2024 +0200
USB: appledisplay: close race between probe and completion handler
commit 8265d06b7794493d82c5c21a12d7ba43eccc30cb upstream.
There is a small window during probing when IO is running
but the backlight is not registered. Processing events
during that time will crash. The completion handler
needs to check for a backlight before scheduling work.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912123317.1026049-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pawel Laszczak <pawell@cadence.com>
Date: Fri Sep 6 06:48:54 2024 +0000
usb: cdnsp: Fix incorrect usb_request status
commit 1702bec4477cc7d31adb4a760d14d33fac928b7a upstream.
Fix changes incorrect usb_request->status returned during disabling
endpoints. Before fix the status returned during dequeuing requests
while disabling endpoint was ECONNRESET.
Patch change it to ESHUTDOWN.
Patch fixes issue detected during testing UVC gadget.
During stopping streaming the class starts dequeuing usb requests and
controller driver returns the -ECONNRESET status. After completion
requests the class or application "uvc-gadget" try to queue this
request again. Changing this status to ESHUTDOWN cause that UVC assumes
that endpoint is disabled, or device is disconnected and stops
re-queuing usb requests.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538E8CA7A2096AAF6A3718FDD9E2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Thu Sep 12 16:19:06 2024 +0200
USB: class: CDC-ACM: fix race between get_serial and set_serial
commit b41c1fa155ba56d125885b0191aabaf3c508d0a3 upstream.
TIOCGSERIAL is an ioctl. Thus it must be atomic. It returns
two values. Racing with set_serial it can return an inconsistent
result. The mutex must be taken.
In terms of logic the bug is as old as the driver. In terms of
code it goes back to the conversion to the get_serial and
set_serial methods.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Fixes: 99f75a1fcd865 ("cdc-acm: switch to ->[sg]et_serial()")
Link: https://lore.kernel.org/r/20240912141916.1044393-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomas Marek <tomas.marek@elrest.cz>
Date: Fri Sep 6 07:50:25 2024 +0200
usb: dwc2: drd: fix clock gating on USB role switch
commit 2c6b6afa59e78bebcb65bbc8a76b3459f139547c upstream.
The dwc2_handle_usb_suspend_intr() function disables gadget clocks in USB
peripheral mode when no other power-down mode is available (introduced by
commit 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")).
However, the dwc2_drd_role_sw_set() USB role update handler attempts to
read DWC2 registers if the USB role has changed while the USB is in suspend
mode (when the clocks are gated). This causes the system to hang.
Release the gadget clocks before handling the USB role update.
Fixes: 0112b7ce68ea ("usb: dwc2: Update dwc2_handle_usb_suspend_intr function.")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Marek <tomas.marek@elrest.cz>
Link: https://lore.kernel.org/r/20240906055025.25057-1-tomas.marek@elrest.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrey Konovalov <andreyknvl@gmail.com>
Date: Wed Sep 4 03:30:51 2024 +0200
usb: gadget: dummy_hcd: execute hrtimer callback in softirq context
commit 9313d139aa25e572d860f6f673b73a20f32d7f93 upstream.
Commit a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer
scheduler") switched dummy_hcd to use hrtimer and made the timer's
callback be executed in the hardirq context.
With that change, __usb_hcd_giveback_urb now gets executed in the hardirq
context, which causes problems for KCOV and KMSAN.
One problem is that KCOV now is unable to collect coverage from
the USB code that gets executed from the dummy_hcd's timer callback,
as KCOV cannot collect coverage in the hardirq context.
Another problem is that the dummy_hcd hrtimer might get triggered in the
middle of a softirq with KCOV remote coverage collection enabled, and that
causes a WARNING in KCOV, as reported by syzbot. (I sent a separate patch
to shut down this WARNING, but that doesn't fix the other two issues.)
Finally, KMSAN appears to ignore tracking memory copying operations
that happen in the hardirq context, which causes false positive
kernel-infoleaks, as reported by syzbot.
Change the hrtimer in dummy_hcd to execute the callback in the softirq
context.
Reported-by: syzbot+2388cdaeb6b10f0c13ac@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2388cdaeb6b10f0c13ac
Reported-by: syzbot+17ca2339e34a1d863aad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=17ca2339e34a1d863aad
Reported-by: syzbot+c793a7eca38803212c61@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c793a7eca38803212c61
Reported-by: syzbot+1e6e0b916b211bee1bd6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1e6e0b916b211bee1bd6
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406141323.413a90d2-lkp@intel.com
Fixes: a7f3813e589f ("usb: gadget: dummy_hcd: Switch to hrtimer transfer scheduler")
Cc: stable@vger.kernel.org
Acked-by: Marcello Sylvester Bauer <sylv@sylv.io>
Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com>
Reported-by: syzbot+edd9fe0d3a65b14588d5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=edd9fe0d3a65b14588d5
Link: https://lore.kernel.org/r/20240904013051.4409-1-andrey.konovalov@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Thu Sep 12 14:54:43 2024 +0200
USB: misc: cypress_cy7c63: check for short transfer
commit 49cd2f4d747eeb3050b76245a7f72aa99dbd3310 upstream.
As we process the second byte of a control transfer, transfers
of less than 2 bytes must be discarded.
This bug is as old as the driver.
SIgned-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912125449.1030536-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Thu Sep 12 15:21:22 2024 +0200
USB: misc: yurex: fix race between read and write
commit 93907620b308609c72ba4b95b09a6aa2658bb553 upstream.
The write code path touches the bbu member in a non atomic manner
without taking the spinlock. Fix it.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240912132126.1034743-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: WangYuli <wangyuli@uniontech.com>
Date: Thu Sep 5 12:09:16 2024 +0800
usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
commit 118ecef16cc221a23f96617016f7a205b070109f upstream.
The resume operation of Phytium Px210 xHCI host would failed
to restore state. Use the XHCI_RESET_ON_RESUME quirk to skip
it and reset the controller after resume.
Co-developed-by: Chen Baozi <chenbaozi@phytium.com.cn>
Signed-off-by: Chen Baozi <chenbaozi@phytium.com.cn>
Co-developed-by: Wang Zhimin <wangzhimin1179@phytium.com.cn>
Signed-off-by: Wang Zhimin <wangzhimin1179@phytium.com.cn>
Co-developed-by: Chen Zhenhua <chenzhenhua@phytium.com.cn>
Signed-off-by: Chen Zhenhua <chenzhenhua@phytium.com.cn>
Co-developed-by: Wang Yinfeng <wangyinfeng@phytium.com.cn>
Signed-off-by: Wang Yinfeng <wangyinfeng@phytium.com.cn>
Co-developed-by: Jiakun Shuai <shuaijiakun1288@phytium.com.cn>
Signed-off-by: Jiakun Shuai <shuaijiakun1288@phytium.com.cn>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/r/2C1FDC3BB34715BE+20240905040916.63199-1-wangyuli@uniontech.com
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Pawel Laszczak <pawell@cadence.com>
Date: Thu Sep 5 07:03:28 2024 +0000
usb: xhci: fix loss of data on Cadence xHC
[ Upstream commit e5fa8db0be3e8757e8641600c518425a4589b85c ]
Streams should flush their TRB cache, re-read TRBs, and start executing
TRBs from the beginning of the new dequeue pointer after a 'Set TR Dequeue
Pointer' command.
Cadence controllers may fail to start from the beginning of the dequeue
TRB as it doesn't clear the Opaque 'RsvdO' field of the stream context
during 'Set TR Dequeue' command. This stream context area is where xHC
stores information about the last partially executed TD when a stream
is stopped. xHC uses this information to resume the transfer where it left
mid TD, when the stream is restarted.
Patch fixes this by clearing out all RsvdO fields before initializing new
Stream transfer using a 'Set TR Dequeue Pointer' command.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
cc: stable@vger.kernel.org
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB95386A40146E3EC64086F409DD9D2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Oliver Neukum <oneukum@suse.com>
Date: Thu Sep 19 14:33:42 2024 +0200
usbnet: fix cyclical race on disconnect with work queue
commit 04e906839a053f092ef53f4fb2d610983412b904 upstream.
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dragos Tatulea <dtatulea@nvidia.com>
Date: Tue Aug 27 19:08:08 2024 +0300
vdpa/mlx5: Fix invalid mr resource destroy
[ Upstream commit dc12502905b7a3de9097ea6b98870470c2921e09 ]
Certain error paths from mlx5_vdpa_dev_add() can end up releasing mr
resources which never got initialized in the first place.
This patch adds the missing check in mlx5_vdpa_destroy_mr_resources()
to block releasing non-initialized mr resources.
Reference trace:
mlx5_core 0000:08:00.2: mlx5_vdpa_dev_add:3274:(pid 2700) warning: No mac address provisioned?
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 140216067 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 8 PID: 2700 Comm: vdpa Kdump: loaded Not tainted 5.14.0-496.el9.x86_64 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb]
Code: [...]
RSP: 0018:ff1c823ac23077f0 EFLAGS: 00010246
RAX: ffffffffc1a21a60 RBX: ffffffff899567a0 RCX: 0000000000000000
RDX: ffffffffffffffff RSI: 0000000000000000 RDI: 0000000000000000
RBP: ff1bda1f7c21e800 R08: 0000000000000000 R09: ff1c823ac2307670
R10: ff1c823ac2307668 R11: ffffffff8a9e7b68 R12: 0000000000000000
R13: 0000000000000000 R14: ff1bda1f43e341a0 R15: 00000000ffffffea
FS: 00007f56eba7c740(0000) GS:ff1bda269f800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000104d90001 CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? show_trace_log_lvl+0x1c4/0x2df
? show_trace_log_lvl+0x1c4/0x2df
? mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa]
? __die_body.cold+0x8/0xd
? page_fault_oops+0x134/0x170
? __irq_work_queue_local+0x2b/0xc0
? irq_work_queue+0x2c/0x50
? exc_page_fault+0x62/0x150
? asm_exc_page_fault+0x22/0x30
? __pfx_mlx5_vdpa_free+0x10/0x10 [mlx5_vdpa]
? vhost_iotlb_del_range+0xf/0xe0 [vhost_iotlb]
mlx5_vdpa_free+0x3d/0x150 [mlx5_vdpa]
vdpa_release_dev+0x1e/0x50 [vdpa]
device_release+0x31/0x90
kobject_cleanup+0x37/0x130
mlx5_vdpa_dev_add+0x2d2/0x7a0 [mlx5_vdpa]
vdpa_nl_cmd_dev_add_set_doit+0x277/0x4c0 [vdpa]
genl_family_rcv_msg_doit+0xd9/0x130
genl_family_rcv_msg+0x14d/0x220
? __pfx_vdpa_nl_cmd_dev_add_set_doit+0x10/0x10 [vdpa]
? _copy_to_user+0x1a/0x30
? move_addr_to_user+0x4b/0xe0
genl_rcv_msg+0x47/0xa0
? __import_iovec+0x46/0x150
? __pfx_genl_rcv_msg+0x10/0x10
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x245/0x370
netlink_sendmsg+0x206/0x440
__sys_sendto+0x1dc/0x1f0
? do_read_fault+0x10c/0x1d0
? do_pte_missing+0x10d/0x190
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x5c/0xf0
? __count_memcg_events+0x4f/0xb0
? mm_account_fault+0x6c/0x100
? handle_mm_fault+0x116/0x270
? do_user_addr_fault+0x1d6/0x6a0
? do_syscall_64+0x6b/0xf0
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
? clear_bhb_loop+0x25/0x80
entry_SYSCALL_64_after_hwframe+0x78/0x80
Fixes: 512c0cdd80c1 ("vdpa/mlx5: Decouple cvq iotlb handling from hw mapping code")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Message-Id: <20240827160808.2448017-2-dtatulea@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Julian Sun <sunjunchao2870@gmail.com>
Date: Fri Aug 23 21:07:30 2024 +0800
vfs: fix race between evice_inodes() and find_inode()&iput()
commit 88b1afbf0f6b221f6c5bb66cc80cd3b38d696687 upstream.
Hi, all
Recently I noticed a bug[1] in btrfs, after digged it into
and I believe it'a race in vfs.
Let's assume there's a inode (ie ino 261) with i_count 1 is
called by iput(), and there's a concurrent thread calling
generic_shutdown_super().
cpu0: cpu1:
iput() // i_count is 1
->spin_lock(inode)
->dec i_count to 0
->iput_final() generic_shutdown_super()
->__inode_add_lru() ->evict_inodes()
// cause some reason[2] ->if (atomic_read(inode->i_count)) continue;
// return before // inode 261 passed the above check
// list_lru_add_obj() // and then schedule out
->spin_unlock()
// note here: the inode 261
// was still at sb list and hash list,
// and I_FREEING|I_WILL_FREE was not been set
btrfs_iget()
// after some function calls
->find_inode()
// found the above inode 261
->spin_lock(inode)
// check I_FREEING|I_WILL_FREE
// and passed
->__iget()
->spin_unlock(inode) // schedule back
->spin_lock(inode)
// check (I_NEW|I_FREEING|I_WILL_FREE) flags,
// passed and set I_FREEING
iput() ->spin_unlock(inode)
->spin_lock(inode) ->evict()
// dec i_count to 0
->iput_final()
->spin_unlock()
->evict()
Now, we have two threads simultaneously evicting
the same inode, which may trigger the BUG(inode->i_state & I_CLEAR)
statement both within clear_inode() and iput().
To fix the bug, recheck the inode->i_count after holding i_lock.
Because in the most scenarios, the first check is valid, and
the overhead of spin_lock() can be reduced.
If there is any misunderstanding, please let me know, thanks.
[1]: https://lore.kernel.org/linux-btrfs/000000000000eabe1d0619c48986@google.com/
[2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable()
return false when I reproduced the bug.
Reported-by: syzbot+67ba3c42bcbb4665d3ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=67ba3c42bcbb4665d3ad
CC: stable@vger.kernel.org
Fixes: 63997e98a3be ("split invalidate_inodes()")
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Link: https://lore.kernel.org/r/20240823130730.658881-1-sunjunchao2870@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jason Wang <jasowang@redhat.com>
Date: Fri Aug 16 11:19:00 2024 +0800
vhost_vdpa: assign irq bypass producer token correctly
[ Upstream commit 02e9e9366fefe461719da5d173385b6685f70319 ]
We used to call irq_bypass_unregister_producer() in
vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the
token pointer is still valid or not.
Actually, we use the eventfd_ctx as the token so the life cycle of the
token should be bound to the VHOST_SET_VRING_CALL instead of
vhost_vdpa_setup_vq_irq() which could be called by set_status().
Fixing this by setting up irq bypass producer's token when handling
VHOST_SET_VRING_CALL and un-registering the producer before calling
vhost_vring_ioctl() to prevent a possible use after free as eventfd
could have been released in vhost_vring_ioctl(). And such registering
and unregistering will only be done if DRIVER_OK is set.
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 2cf1ba9a4d15 ("vhost_vdpa: implement IRQ offloading in vhost_vdpa")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240816031900.18013-1-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wenbo Li <liwenbo.martin@bytedance.com>
Date: Thu Sep 19 16:13:51 2024 +0800
virtio_net: Fix mismatched buf address when unmapping for small packets
[ Upstream commit c11a49d58ad229a1be1ebe08a2b68fedf83db6c8 ]
Currently, the virtio-net driver will perform a pre-dma-mapping for
small or mergeable RX buffer. But for small packets, a mismatched address
without VIRTNET_RX_PAD and xdp_headroom is used for unmapping.
That will result in unsynchronized buffers when SWIOTLB is enabled, for
example, when running as a TDX guest.
This patch unifies the address passed to the virtio core as the address of
the virtnet header and fixes the mismatched buffer address.
Changes from v2: unify the buf that passed to the virtio core in small
and merge mode.
Changes from v1: Use ctx to get xdp_headroom.
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Wenbo Li <liwenbo.martin@bytedance.com>
Signed-off-by: Jiahui Cen <cenjiahui@bytedance.com>
Signed-off-by: Ying Fang <fangying.tommy@bytedance.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20240919081351.51772-1-liwenbo.martin@bytedance.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jonas Blixt <jonas.blixt@actia.se>
Date: Thu Aug 1 14:18:45 2024 +0200
watchdog: imx_sc_wdt: Don't disable WDT in suspend
[ Upstream commit 2d9d6d300fb0a4ae4431bb308027ac9385746d42 ]
Parts of the suspend and resume chain is left unprotected if we disable
the WDT here.
>From experiments we can see that the SCU disables and re-enables the WDT
when we enter and leave suspend to ram. By not touching the WDT here we
are protected by the WDT all the way to the SCU.
Signed-off-by: Jonas Blixt <jonas.blixt@actia.se>
CC: Anson Huang <anson.huang@nxp.com>
Fixes: 986857acbc9a ("watchdog: imx_sc: Add i.MX system controller watchdog support")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240801121845.1465765-1-jonas.blixt@actia.se
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kang Yang <quic_kangyang@quicinc.com>
Date: Wed Jul 3 17:40:49 2024 +0300
wifi: ath11k: use work queue to process beacon tx event
[ Upstream commit 177b49dbf9c1d8f9f25a22ffafa416fc2c8aa6a3 ]
Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template")
from Feb 28, 2024 (linux-next), leads to the following Smatch static
checker warning:
drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie()
warn: sleeping in atomic context
The reason is that ath11k_bcn_tx_status_event() will directly call might
sleep function ath11k_wmi_cmd_send() during RCU read-side critical
sections. The call trace is like:
ath11k_bcn_tx_status_event()
-> rcu_read_lock()
-> ath11k_mac_bcn_tx_event()
-> ath11k_mac_setup_bcn_tmpl()
……
-> ath11k_wmi_bcn_tmpl()
-> ath11k_wmi_cmd_send()
-> rcu_read_unlock()
Commit 886433a98425 ("ath11k: add support for BSS color change") added the
ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning
of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock
to avoid warning but also introduced this BUG.
Use work queue to avoid directly calling ath11k_mac_bcn_tx_event()
during RCU critical sections. No need to worry about the deletion of vif
because cancel_work_sync() will drop the work if it doesn't start or
block vif deletion until the running work is done.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Fixes: 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/2d277abd-5e7b-4da0-80e0-52bd96337f6e@moroto.mountain/
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240626053543.1946-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: P Praneesh <quic_ppranees@quicinc.com>
Date: Mon Apr 1 00:02:31 2024 +0530
wifi: ath12k: fix BSS chan info request WMI command
[ Upstream commit 59529c982f85047650fd473db903b23006a796c6 ]
Currently, the firmware returns incorrect pdev_id information in
WMI_PDEV_BSS_CHAN_INFO_EVENTID, leading to incorrect filling of
the pdev's survey information.
To prevent this issue, when requesting BSS channel information
through WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, firmware expects
pdev_id as one of the arguments in this WMI command.
Add pdev_id to the struct wmi_pdev_bss_chan_info_req_cmd and fill it
during ath12k_wmi_pdev_bss_chan_info_request(). This resolves the
issue of sending the correct pdev_id in WMI_PDEV_BSS_CHAN_INFO_EVENTID.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-2-quic_kathirve@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Baochen Qiang <quic_bqiang@quicinc.com>
Date: Wed Jul 10 10:18:19 2024 +0800
wifi: ath12k: fix invalid AMPDU factor calculation in ath12k_peer_assoc_h_he()
[ Upstream commit a66de2d0f22b1740f3f9777776ad98c4bee62dff ]
Currently ampdu_factor is wrongly calculated in ath12k_peer_assoc_h_he(), fix it.
This is found during code review.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240710021819.87216-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: P Praneesh <quic_ppranees@quicinc.com>
Date: Mon Apr 1 00:02:32 2024 +0530
wifi: ath12k: match WMI BSS chan info structure with firmware definition
[ Upstream commit dd98d54db29fb553839f43ade5f547baa93392c8 ]
struct wmi_pdev_bss_chan_info_event is not similar to the firmware
struct definition, this will cause some random failures.
Fix by matching the struct wmi_pdev_bss_chan_info_event with the
firmware structure definition.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-3-quic_kathirve@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Toke Høiland-Jørgensen <toke@redhat.com>
Date: Mon Aug 5 13:02:22 2024 +0200
wifi: ath9k: Remove error checks when creating debugfs entries
[ Upstream commit f6ffe7f0184792c2f99aca6ae5b916683973d7d3 ]
We should not be checking the return values from debugfs creation at all: the
debugfs functions are designed to handle errors of previously called functions
and just transparently abort the creation of debugfs entries when debugfs is
disabled. If we check the return value and abort driver initialisation, we break
the driver if debugfs is disabled (such as when booting with debugfs=off).
Earlier versions of ath9k accidentally did the right thing by checking the
return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two
commits referenced below, breaking ath9k with debugfs=off starting from the 6.6
kernel (as reported in the Bugzilla linked below).
Restore functionality by just getting rid of the return value check entirely.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122
Fixes: 1e4134610d93 ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()")
Fixes: 6edb4ba6fb5b ("wifi: ath9k: fix parameter check in ath9k_init_debug()")
Reported-by: Daniel Tobias <dan.g.tob@gmail.com>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arend van Spriel <arend.vanspriel@broadcom.com>
Date: Sat Jul 27 20:56:17 2024 +0200
wifi: brcmfmac: introducing fwil query functions
[ Upstream commit c6002b6c05f3edfa12fd25990cc637281f200442 ]
When the firmware interface layer was refactored it provided various
"get" and "set" functions. For the "get" in some cases a parameter
needed to be passed down to firmware as a key indicating what to
"get" turning the output parameter of the "get" function into an
input parameter as well. To accommodate this the "get" function blindly
copies the parameter which in some places resulted in an uninitialized
warnings from the compiler. These have been fixed by initializing the
input parameter in the past. Recently another batch of similar fixes
were submitted to address clang static checker warnings [1].
Proposing another solution by introducing a "query" variant which is used
when the (input) parameter is needed by firmware. The "get" variant will
only fill the (output) parameter with the result received from firmware
taking care of proper endianess conversion.
[1] https://lore.kernel.org/all/20240702122450.2213833-1-suhui@nfschina.com/
Fixes: 81f5dcb80830 ("brcmfmac: refactor firmware interface layer.")
Reported-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240727185617.253210-1-arend.vanspriel@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: hhorace <hhoracehsu@gmail.com>
Date: Wed Aug 7 16:22:05 2024 +0800
wifi: cfg80211: fix bug of mapping AF3x to incorrect User Priority
[ Upstream commit a68b22e2905b04f376e2fa116be5e48b948f81c8 ]
According to RFC8325 4.3, Multimedia Streaming: AF31(011010, 26),
AF32(011100, 28), AF33(011110, 30) maps to User Priority = 4
and AC_VI (Video).
However, the original code remain the default three Most Significant
Bits (MSBs) of the DSCP, which makes AF3x map to User Priority = 3
and AC_BE (Best Effort).
Fixes: 6fdb8b8781d5 ("wifi: cfg80211: Update the default DSCP-to-UP mapping")
Signed-off-by: hhorace <hhoracehsu@gmail.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240807082205.1369-1-hhoracehsu@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Mon Sep 9 12:08:06 2024 +0300
wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors
[ Upstream commit 15ea13b1b1fbf6364d4cd568e65e4c8479632999 ]
Although not reproduced in practice, these two cases may be
considered by UBSAN as off-by-one errors. So fix them in the
same way as in commit a26a5107bc52 ("wifi: cfg80211: fix UBSAN
noise in cfg80211_wext_siwscan()").
Fixes: 807f8a8c3004 ("cfg80211/nl80211: add support for scheduled scans")
Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240909090806.1091956-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Thu Sep 5 18:04:00 2024 +0300
wifi: cfg80211: fix UBSAN noise in cfg80211_wext_siwscan()
[ Upstream commit a26a5107bc52922cf5f67361e307ad66547b51c7 ]
Looking at https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
and running reproducer with CONFIG_UBSAN_BOUNDS, I've noticed the
following:
[ T4985] UBSAN: array-index-out-of-bounds in net/wireless/scan.c:3479:25
[ T4985] index 164 is out of range for type 'struct ieee80211_channel *[]'
<...skipped...>
[ T4985] Call Trace:
[ T4985] <TASK>
[ T4985] dump_stack_lvl+0x1c2/0x2a0
[ T4985] ? __pfx_dump_stack_lvl+0x10/0x10
[ T4985] ? __pfx__printk+0x10/0x10
[ T4985] __ubsan_handle_out_of_bounds+0x127/0x150
[ T4985] cfg80211_wext_siwscan+0x11a4/0x1260
<...the rest is not too useful...>
Even if we do 'creq->n_channels = n_channels' before 'creq->ssids =
(void *)&creq->channels[n_channels]', UBSAN treats the latter as
off-by-one error. Fix this by using pointer arithmetic rather than
an expression with explicit array indexing and use convenient
'struct_size()' to simplify the math here and in 'kzalloc()' above.
Fixes: 5ba63533bbf6 ("cfg80211: fix alignment problem in scan request")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240905150400.126386-1-dmantipov@yandex.ru
[fix coding style for multi-line calculation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Johannes Berg <johannes.berg@intel.com>
Date: Mon Jul 29 20:20:07 2024 +0300
wifi: iwlwifi: config: label 'gl' devices as discrete
[ Upstream commit 8131dd52810dfcdb49fcdc78f5e18e1538b6c441 ]
The 'gl' devices are in the bz family, but they're not,
integrated, so should have their own trans config struct.
Fix that, also necessitating the removal of LTR config,
and while at it remove 0x2727 and 0x272D IDs that were
only used for test chips.
Fixes: c30a2a64788b ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Sun Aug 25 19:17:11 2024 +0300
wifi: iwlwifi: mvm: allow ESR when we the ROC expires
[ Upstream commit 76364f3edfde60aa2fa20b578ba9b96797d7bff5 ]
We forgot to release the ROC reason for ESR prevention when the remain
on channel expires.
Add this.
Fixes: a1efeb823084 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.8f8765f359cc.I16fcd6198072d422ff36dce68070aafaf011f4c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avraham Stern <avraham.stern@intel.com>
Date: Mon Jul 29 20:20:12 2024 +0300
wifi: iwlwifi: mvm: increase the time between ranging measurements
[ Upstream commit 3a7ee94559dfd640604d0265739e86dec73b64e8 ]
The algo running in fw may take a little longer than 5 milliseconds,
(e.g. measurement on 80MHz while associated). Increase the minimum
time between measurements to 7 milliseconds.
Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Golan Ben Ami <golan.ben.ami@intel.com>
Date: Thu Jun 13 17:11:23 2024 +0300
wifi: iwlwifi: remove AX101, AX201 and AX203 support from LNL
[ Upstream commit 6adae0b081454393ca5f7363fd3c7379c8e2a7a1 ]
LNL is the codename for the upcoming Series 2 Core Ultra
processors designed by Intel. AX101, AX201 and AX203 devices
are not shiped on LNL platforms, so don't support them.
Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240613171043.f24a228dfd96.I989a2d3f1513211bc49ac8143ee4e9e341e1ee67@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Stable-dep-of: 8131dd52810d ("wifi: iwlwifi: config: label 'gl' devices as discrete")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ilan Peer <ilan.peer@intel.com>
Date: Tue Aug 27 10:39:20 2024 +0200
wifi: mac80211: Check for missing VHT elements only for 5 GHz
[ Upstream commit 67bb124cd9ae38870667e4f9c876ef8e0f82ec44 ]
Check for missing VHT Capabilities and VHT Operation elements in
association response frame only for 5 GHz links.
Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240827103920.dd711282d543.Iaba245cebc52209b0499d5bab7d8a8ef1df9dd65@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ping-Ke Shih <pkshih@realtek.com>
Date: Mon Jul 29 15:48:16 2024 +0800
wifi: mac80211: don't use rate mask for offchannel TX either
[ Upstream commit e7a7ef9a0742dbd0818d5b15fba2c5313ace765b ]
Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for
scanning"), ignore incorrect settings to avoid no supported rate warning
reported by syzbot.
The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211:
fix default HE tx bitrate mask in 2G band"), which however corrects
bitmask of HE MCS and recognizes correctly settings of empty legacy rate
plus HE MCS rate instead of returning -EINVAL.
As suggestions [1], follow the change of SCAN TX to consider this case of
offchannel TX as well.
[1] https://lore.kernel.org/linux-wireless/6ab2dc9c3afe753ca6fdcdd1421e7a1f47e87b84.camel@sipsolutions.net/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024
Reported-by: syzbot+8dd98a9e98ee28dc484a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-wireless/000000000000fdef8706191a3f7b@google.com/
Fixes: 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240729074816.20323-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Date: Thu Aug 8 11:59:16 2024 +0300
wifi: mac80211: fix the comeback long retry times
[ Upstream commit 1524173a3745899612c71d9e83ff8fe29dbb2cfb ]
When we had a comeback, we will never use the default timeout values
again because comeback is never cleared.
Clear comeback if we send another association request which will allow
to start a default timer after Tx status.
The problem was seen with iwlwifi where the tx_status on the association
request is handled before the association response frame (which is the
usual case).
1) Tx assoc request 1/3
2) Rx assoc response (comeback, timeout = 1 second)
3) wait 1 second
4) Tx assoc request 2/3
5) Set timer to IEEE80211_ASSOC_TIMEOUT_LONG = 500ms (1 second after
round_up)
6) tx_status on frame sent in 4) is ignored because comeback is still
true
7) AP does not reply with assoc response
8) wait 1s <= This is where the bug is felt
9) Tx assoc request 3/3
With this fix, in step 6 we will reset the timer to
IEEE80211_ASSOC_TIMEOUT_SHORT = 100ms and we will wait only 100ms in
step 8.
Fixes: b133fdf07db8 ("wifi: mac80211: Skip association timeout update after comeback rejection")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240808085916.23519-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Fri Sep 6 15:31:51 2024 +0300
wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop()
[ Upstream commit 9d301de12da6e1bb069a9835c38359b8e8135121 ]
Since '__dev_queue_xmit()' should be called with interrupts enabled,
the following backtrace:
ieee80211_do_stop()
...
spin_lock_irqsave(&local->queue_stop_reason_lock, flags)
...
ieee80211_free_txskb()
ieee80211_report_used_skb()
ieee80211_report_ack_skb()
cfg80211_mgmt_tx_status_ext()
nl80211_frame_tx_status()
genlmsg_multicast_netns()
genlmsg_multicast_netns_filtered()
nlmsg_multicast_filtered()
netlink_broadcast_filtered()
do_one_broadcast()
netlink_broadcast_deliver()
__netlink_sendskb()
netlink_deliver_tap()
__netlink_deliver_tap_skb()
dev_queue_xmit()
__dev_queue_xmit() ; with IRQS disabled
...
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags)
issues the warning (as reported by syzbot reproducer):
WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120
Fix this by implementing a two-phase skb reclamation in
'ieee80211_do_stop()', where actual work is performed
outside of a section with interrupts disabled.
Fixes: 5061b0c2b906 ("mac80211: cooperate more with network namespaces")
Reported-by: syzbot+1a3986bbd3169c307819@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1a3986bbd3169c307819
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://patch.msgid.link/20240906123151.351647-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Fri Aug 16 17:50:40 2024 +0800
wifi: mt76: connac: fix checksum offload fields of connac3 RXD
[ Upstream commit a04b920fbc707deb699292cdae47006e8ea57d87 ]
Fix incorrect RXD offset and bitfield related to RX checksum offload.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Fixes: 4e9011fcdfc4 ("wifi: mt76: connac: move connac3 definitions in mt76_connac3_mac.h")
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20240816095040.2574-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Felix Fietkau <nbd@nbd.name>
Date: Tue Aug 27 11:29:48 2024 +0200
wifi: mt76: mt7603: fix mixed declarations and code
[ Upstream commit 9b8d932053b8b45d650360b36f701cf0f9b6470e ]
Move the qid variable declaration further up
Fixes: b473c0e47f04 ("wifi: mt76: mt7603: fix tx queue of loopback packets")
Link: https://patch.msgid.link/20240827093011.18621-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Thu Sep 5 09:47:53 2024 +0800
wifi: mt76: mt7615: check devm_kasprintf() returned value
commit 5acdc432f832d810e0d638164c393b877291d9b4 upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 0bb4e9187ea4 ("mt76: mt7615: fix hwmon temp sensor mem use-after-free")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240905014753.353271-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Tue Sep 3 09:49:55 2024 +0800
wifi: mt76: mt7915: check devm_kasprintf() returned value
commit 267efeda8c55f30e0e7c5b7fd03dea4efec6916c upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014955.4145423-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bjørn Mork <bjorn@mork.no>
Date: Sat Jul 13 15:00:10 2024 +0200
wifi: mt76: mt7915: fix oops on non-dbdc mt7986
[ Upstream commit 862bf7cbd772c2bad570ef0c5b5556a1330656dd ]
mt7915_band_config() sets band_idx = 1 on the main phy for mt7986
with MT7975_ONE_ADIE or MT7976_ONE_ADIE.
Commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status") introduced a dereference of the
phys array indirectly indexed by band_idx via wcid->phy_idx in
mt76_wcid_cleanup(). This caused the following Oops on affected
mt7986 devices:
Unable to handle kernel read from unreadable memory at virtual address 0000000000000024
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005
CM = 0, WnR = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=0000000042545000
[0000000000000024] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] SMP
Modules linked in: ... mt7915e mt76_connac_lib mt76 mac80211 cfg80211 ...
CPU: 2 PID: 1631 Comm: hostapd Not tainted 5.15.150 #0
Hardware name: ZyXEL EX5700 (Telenor) (DT)
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mt76_wcid_cleanup+0x84/0x22c [mt76]
lr : mt76_wcid_cleanup+0x64/0x22c [mt76]
sp : ffffffc00a803700
x29: ffffffc00a803700 x28: ffffff80008f7300 x27: ffffff80003f3c00
x26: ffffff80000a7880 x25: ffffffc008c26e00 x24: 0000000000000001
x23: ffffffc000a68114 x22: 0000000000000000 x21: ffffff8004172cc8
x20: ffffffc00a803748 x19: ffffff8004152020 x18: 0000000000000000
x17: 00000000000017c0 x16: ffffffc008ef5000 x15: 0000000000000be0
x14: ffffff8004172e28 x13: ffffff8004172e28 x12: 0000000000000000
x11: 0000000000000000 x10: ffffff8004172e30 x9 : ffffff8004172e28
x8 : 0000000000000000 x7 : ffffff8004156020 x6 : 0000000000000000
x5 : 0000000000000031 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000000 x1 : ffffff80008f7300 x0 : 0000000000000024
Call trace:
mt76_wcid_cleanup+0x84/0x22c [mt76]
__mt76_sta_remove+0x70/0xbc [mt76]
mt76_sta_state+0x8c/0x1a4 [mt76]
mt7915_eeprom_get_power_delta+0x11e4/0x23a0 [mt7915e]
drv_sta_state+0x144/0x274 [mac80211]
sta_info_move_state+0x1cc/0x2a4 [mac80211]
sta_set_sinfo+0xaf8/0xc24 [mac80211]
sta_info_destroy_addr_bss+0x4c/0x6c [mac80211]
ieee80211_color_change_finish+0x1c08/0x1e70 [mac80211]
cfg80211_check_station_change+0x1360/0x4710 [cfg80211]
genl_family_rcv_msg_doit+0xb4/0x110
genl_rcv_msg+0xd0/0x1bc
netlink_rcv_skb+0x58/0x120
genl_rcv+0x34/0x50
netlink_unicast+0x1f0/0x2ec
netlink_sendmsg+0x198/0x3d0
____sys_sendmsg+0x1b0/0x210
___sys_sendmsg+0x80/0xf0
__sys_sendmsg+0x44/0xa0
__arm64_sys_sendmsg+0x20/0x30
invoke_syscall.constprop.0+0x4c/0xe0
do_el0_svc+0x40/0xd0
el0_svc+0x14/0x4c
el0t_64_sync_handler+0x100/0x110
el0t_64_sync+0x15c/0x160
Code: d2800002 910092c0 52800023 f9800011 (885f7c01)
---[ end trace 7e42dd9a39ed2281 ]---
Fix by using mt76_dev_phy() which will map band_idx to the correct phy
for all hardware combinations.
Fixes: 0335c034e726 ("wifi: mt76: fix race condition related to checking tx queue fill status")
Link: https://github.com/openwrt/openwrt/issues/14548
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20240713130010.516037-1-bjorn@mork.no
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Howard Hsu <howard-yh.hsu@mediatek.com>
Date: Tue Aug 27 11:30:08 2024 +0200
wifi: mt76: mt7915: fix rx filter setting for bfee functionality
[ Upstream commit 6ac80fce713e875a316a58975b830720a3e27721 ]
Fix rx filter setting to prevent dropping NDPA frames. Without this
change, bfee functionality may behave abnormally.
Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Link: https://patch.msgid.link/20240827093011.18621-21-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Tue Sep 3 09:44:55 2024 +0800
wifi: mt76: mt7921: Check devm_kasprintf() returned value
commit 1ccc9e476ce76e8577ba4fdbd1f63cb3e3499d38 upstream.
devm_kasprintf() can return a NULL pointer on failure but this returned
value is not checked. Fix this lack and check the returned value.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 6ae39b7c7ed4 ("wifi: mt76: mt7921: Support temp sensor")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviwed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903014455.4144536-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Date: Tue Aug 6 09:34:08 2024 +0800
wifi: mt76: mt7921: fix wrong UNII-4 freq range check for the channel usage
[ Upstream commit 723762a7a7e6fdb3cc6953f127a3fe9c5162beb7 ]
The check should start from 5845 to 5925, which includes
channels 169, 173, and 177.
Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240806013408.17874-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Date: Mon Aug 19 09:53:33 2024 +0800
wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc
commit 9679ca7326e52282cc923c4d71d81c999cb6cd55 upstream.
Due to the lack of checks on the clc array, if the firmware supports
more clc configuration, it will cause illegal memory access.
Cc: stable@vger.kernel.org
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240819015334.14580-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Howard Hsu <howard-yh.hsu@mediatek.com>
Date: Fri Aug 16 17:46:31 2024 +0800
wifi: mt76: mt7996: fix EHT beamforming capability check
[ Upstream commit 9ca65757f0a5b393a7737d37f377d5daf91716af ]
If a VIF acts as a beamformer, it should check peer's beamformee
capability, and vice versa.
Fixes: ba01944adee9 ("wifi: mt76: mt7996: add EHT beamforming support")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rex Lu <rex.lu@mediatek.com>
Date: Fri Aug 16 17:46:33 2024 +0800
wifi: mt76: mt7996: fix handling mbss enable/disable
[ Upstream commit ded1a6d9e13a32d4e8bef0c63accf49b9415ff5f ]
When mbss was previously enabled, the TLV needs to be included when
disabling it again, in order to clear the firmware state.
Fixes: a7908d5b61e5 ("wifi: mt76: mt7996: fix non-main BSS no beacon issue for MBSS scenario")
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-9-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Howard Hsu <howard-yh.hsu@mediatek.com>
Date: Fri Aug 16 17:46:29 2024 +0800
wifi: mt76: mt7996: fix HE and EHT beamforming capabilities
[ Upstream commit e1f4847fdbdf5d44ae60e035c131920e5ab88598 ]
Fix HE and EHT beamforming capabilities for different bands and
interface types.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ma Ke <make24@iscas.ac.cn>
Date: Tue Aug 13 16:12:42 2024 +0800
wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he
commit f503ae90c7355e8506e68498fe84c1357894cd5b upstream.
Fix the NULL pointer dereference in mt7996_mcu_sta_bfer_he
routine adding an sta interface to the mt7996 driver.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240813081242.3991814-1-make24@iscas.ac.cn
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Fri Aug 16 17:46:26 2024 +0800
wifi: mt76: mt7996: fix traffic delay when switching back to working channel
[ Upstream commit 376200f095d0c3a7096199b336204698d7086279 ]
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to
properly stop and resume MAC TX queue. Without this tag, HW needs more time
to resume traffic when switching back to working channel.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Felix Fietkau <nbd@nbd.name>
Date: Tue Aug 27 11:30:10 2024 +0200
wifi: mt76: mt7996: fix uninitialized TLV data
[ Upstream commit 9e461f4a2329109571f4b10f9bcad28d07e6ebb3 ]
Use skb_put_zero instead of skb_put
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://patch.msgid.link/20240827093011.18621-23-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Fri Aug 16 17:46:27 2024 +0800
wifi: mt76: mt7996: fix wmm set of station interface to 3
[ Upstream commit 9265397caacf5c0c2d10c40b2958a474664ebd9e ]
According to connac3 HW design, the WMM index of AP and STA interface
should be 0 and 3, respectively.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Fri Aug 16 17:46:25 2024 +0800
wifi: mt76: mt7996: use hweight16 to get correct tx antenna
[ Upstream commit f98c3de92bb05dac4a4969df8a4595ed380b4604 ]
The chainmask is u16 so using hweight8 cannot get correct tx_ant.
Without this patch, the tx_ant of band 2 would be -1 and lead to the
following issue:
BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e]
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Tue Jul 23 22:32:59 2024 +0300
wifi: rtw88: 8703b: Fix reported RX band width
commit 0129e5ff2842450f1426e312b5e580c0814e0de3 upstream.
The definition of GET_RX_DESC_BW is incorrect. Fix it according to the
GET_RX_STATUS_DESC_BW_8703B macro from the official driver.
Tested only with RTL8812AU, which uses the same bits.
Cc: stable@vger.kernel.org
Fixes: 9bb762b3a957 ("wifi: rtw88: Add definitions for 8703b chip")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Tested-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1cfed9d5-4304-4b96-84c5-c347f59fedb9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Nick Morrow <morrownr@gmail.com>
Date: Thu Jul 11 01:14:23 2024 +0300
wifi: rtw88: 8821cu: Remove VID/PID 0bda:c82c
commit 0af8cd2822f31ed8363223329e5cff2a7ed01961 upstream.
Remove VID/PID 0bda:c82c as it was inadvertently added to the device
list in driver rtw8821cu. This VID/PID is for the rtw8822cu device
and it is already in the appropriate place for that device.
Cc: stable@vger.kernel.org
Signed-off-by: Nick Morrow <morrownr@gmail.com>
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/335d7fa1-0ba5-4b86-bba5-f98834ace1f8@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Tue Jul 23 22:31:36 2024 +0300
wifi: rtw88: 8822c: Fix reported RX band width
commit a71ed5898dfae68262f79277915d1dfe34586bc6 upstream.
"iw dev wlp2s0 station dump" shows incorrect rx bitrate:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 86.7 MBit/s VHT-MCS 9 VHT-NSS 1
This is because the RX band width is calculated incorrectly. Fix the
calculation according to the phydm_rxsc_2_bw() function from the
official drivers.
After:
tx bitrate: 866.7 MBit/s VHT-MCS 9 80MHz short GI VHT-NSS 2
rx bitrate: 390.0 MBit/s VHT-MCS 9 80MHz VHT-NSS 1
It also works correctly with the AP configured for 20 MHz and 40 MHz.
Tested with RTL8822CE.
Cc: stable@vger.kernel.org
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bca8949b-e2bd-4515-98fd-70d3049a0097@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Antipov <dmantipov@yandex.ru>
Date: Fri Jul 26 14:46:57 2024 +0300
wifi: rtw88: always wait for both firmware loading attempts
[ Upstream commit 0e735a4c6137262bcefe45bb52fde7b1f5fc6c4d ]
In 'rtw_wait_firmware_completion()', always wait for both (regular and
wowlan) firmware loading attempts. Otherwise if 'rtw_usb_intf_init()'
has failed in 'rtw_usb_probe()', 'rtw_usb_disconnect()' may issue
'ieee80211_free_hw()' when one of 'rtw_load_firmware_cb()' (usually
the wowlan one) is still in progress, causing UAF detected by KASAN.
Fixes: c8e5695eae99 ("rtw88: load wowlan firmware if wowlan is supported")
Reported-by: syzbot+6c6c08700f9480c41fe3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6c6c08700f9480c41fe3
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240726114657.25396-1-dmantipov@yandex.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Date: Wed Aug 21 16:11:03 2024 +0300
wifi: rtw88: Fix USB/SDIO devices not transmitting beacons
commit faa2e484b393c56bc1243dca6676a70bc485f775 upstream.
All USB devices supported by rtw88 have the same problem: they don't
transmit beacons in AP mode. (Some?) SDIO devices are also affected.
The cause appears to be clearing BIT_EN_BCNQ_DL of REG_FWHW_TXQ_CTRL
before uploading the beacon reserved page, so don't clear the bit for
USB and SDIO devices.
Tested with RTL8811CU and RTL8723DU.
Cc: <stable@vger.kernel.org> # 6.6.x
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/49de73b5-698f-4865-ab63-100e28dfc4a1@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Kandybka <d.kandybka@gmail.com>
Date: Fri Aug 9 11:53:10 2024 +0300
wifi: rtw88: remove CPT execution branch never used
[ Upstream commit 77c977327dfaa9ae2e154964cdb89ceb5c7b7cf1 ]
In 'rtw_coex_action_bt_a2dp_pan', 'wl_cpt_test' and 'bt_cpt_test' are
hardcoded to false, so corresponding 'table_case' and 'tdma_case'
assignments are never met.
Also 'rtw_coex_set_rf_para(rtwdev, chip->wl_rf_para_rx[1])' is never
executed. Assuming that CPT was never fully implemented, remove
lookalike leftovers. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 76f631cb401f ("rtw88: coex: update the mechanism for A2DP + PAN")
Signed-off-by: Dmitry Kandybka <d.kandybka@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809085310.10512-1-d.kandybka@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ping-Ke Shih <pkshih@realtek.com>
Date: Fri Aug 9 15:20:09 2024 +0800
wifi: rtw89: remove unused C2H event ID RTW89_MAC_C2H_FUNC_READ_WOW_CAM to prevent out-of-bounds reading
[ Upstream commit 56310ddb50b190b3390fdc974aec455d0a516bd2 ]
The handler of firmware C2H event RTW89_MAC_C2H_FUNC_READ_WOW_CAM isn't
implemented, but driver expects number of handlers is
NUM_OF_RTW89_MAC_C2H_FUNC_WOW causing out-of-bounds access. Fix it by
removing ID.
Addresses-Coverity-ID: 1598775 ("Out-of-bounds read")
Fixes: ff53fce5c78b ("wifi: rtw89: wow: update latest PTK GTK info to mac80211 after resume")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240809072012.84152-4-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiawei Ye <jiawei.ye@foxmail.com>
Date: Thu Aug 29 08:17:09 2024 +0000
wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param
[ Upstream commit 6d7c6ae1efb1ff68bc01d79d94fdf0388f86cdd8 ]
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Uros Bizjak <ubizjak@gmail.com>
Date: Mon Aug 19 10:33:13 2024 +0200
x86/boot/64: Strip percpu address space when setting up GDT descriptors
[ Upstream commit b51207dc02ec3aeaa849e419f79055d7334845b6 ]
init_per_cpu_var() returns a pointer in the percpu address space while
rip_rel_ptr() expects a pointer in the generic address space.
When strict address space checks are enabled, GCC's named address space
checks fail:
asm.h:124:63: error: passing argument 1 of 'rip_rel_ptr' from
pointer to non-enclosed address space
Add a explicit cast to remove address space of the returned pointer.
Fixes: 11e36b0f7c21 ("x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240819083334.148536-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Vyukov <dvyukov@google.com>
Date: Tue Jun 11 09:50:30 2024 +0200
x86/entry: Remove unwanted instrumentation in common_interrupt()
commit 477d81a1c47a1b79b9c08fc92b5dea3c5143800b upstream.
common_interrupt() and related variants call kvm_set_cpu_l1tf_flush_l1d(),
which is neither marked noinstr nor __always_inline.
So compiler puts it out of line and adds instrumentation to it. Since the
call is inside of instrumentation_begin/end(), objtool does not warn about
it.
The manifestation is that KCOV produces spurious coverage in
kvm_set_cpu_l1tf_flush_l1d() in random places because the call happens when
preempt count is not yet updated to say that the kernel is in an interrupt.
Mark kvm_set_cpu_l1tf_flush_l1d() as __always_inline and move it out of the
instrumentation_begin/end() section. It only calls __this_cpu_write()
which is already safe to call in noinstr contexts.
Fixes: 6368558c3710 ("x86/entry: Provide IDTENTRY_SYSVEC")
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/3f9a1de9e415fcb53d07dc9e19fa8481bb021b1b.1718092070.git.dvyukov@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jun 14 12:58:55 2024 +0300
x86/mm: Add callbacks to prepare encrypted memory for kexec
[ Upstream commit 22daa42294b419a0d8060a3870285e7a72aa63e4 ]
AMD SEV and Intel TDX guests allocate shared buffers for performing I/O.
This is done by allocating pages normally from the buddy allocator and
then converting them to shared using set_memory_decrypted().
On kexec, the second kernel is unaware of which memory has been
converted in this manner. It only sees E820_TYPE_RAM. Accessing shared
memory as private is fatal.
Therefore, the memory state must be reset to its original state before
starting the new kernel with kexec.
The process of converting shared memory back to private occurs in two
steps:
- enc_kexec_begin() stops new conversions.
- enc_kexec_finish() unshares all existing shared memory, reverting it
back to private.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-11-kirill.shutemov@linux.intel.com
Stable-dep-of: d4fc4d014715 ("x86/tdx: Fix "in-kernel MMIO" check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jun 14 12:58:52 2024 +0300
x86/mm: Make x86_platform.guest.enc_status_change_*() return an error
[ Upstream commit 99c5c4c60e0db1d2ff58b8a61c93b6851146469f ]
TDX is going to have more than one reason to fail enc_status_change_prepare().
Change the callback to return errno instead of assuming -EIO. Change
enc_status_change_finish() too to keep the interface symmetric.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-8-kirill.shutemov@linux.intel.com
Stable-dep-of: d4fc4d014715 ("x86/tdx: Fix "in-kernel MMIO" check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Yosry Ahmed <yosryahmed@google.com>
Date: Tue Jul 2 13:21:37 2024 +0000
x86/mm: Use IPIs to synchronize LAM enablement
[ Upstream commit 3b299b99556c1753923f8d9bbd9304bcd139282f ]
LAM can only be enabled when a process is single-threaded. But _kernel_
threads can temporarily use a single-threaded process's mm.
If LAM is enabled by a userspace process while a kthread is using its
mm, the kthread will not observe LAM enablement (i.e. LAM will be
disabled in CR3). This could be fine for the kthread itself, as LAM only
affects userspace addresses. However, if the kthread context switches to
a thread in the same userspace process, CR3 may or may not be updated
because the mm_struct doesn't change (based on pending TLB flushes). If
CR3 is not updated, the userspace thread will run incorrectly with LAM
disabled, which may cause page faults when using tagged addresses.
Example scenario:
CPU 1 CPU 2
/* kthread */
kthread_use_mm()
/* user thread */
prctl_enable_tagged_addr()
/* LAM enabled on CPU 2 */
/* LAM disabled on CPU 1 */
context_switch() /* to CPU 1 */
/* Switching to user thread */
switch_mm_irqs_off()
/* CR3 not updated */
/* LAM is still disabled on CPU 1 */
Synchronize LAM enablement by sending an IPI to all CPUs running with
the mm_struct to enable LAM. This makes sure LAM is enabled on CPU 1
in the above scenario before prctl_enable_tagged_addr() returns and
userspace starts using tagged addresses, and before it's possible to
run the userspace process on CPU 1.
In switch_mm_irqs_off(), move reading the LAM mask until after
mm_cpumask() is updated. This ensures that if an outdated LAM mask is
written to CR3, an IPI is received to update it right after IRQs are
re-enabled.
[ dhansen: Add a LAM enabling helper and comment it ]
Fixes: 82721d8b25d7 ("x86/mm: Handle LAM on context switch")
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/20240702132139.3332013-2-yosryahmed%40google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Date: Mon Aug 12 13:26:59 2024 -0700
x86/PCI: Check pcie_find_root_port() return for NULL
[ Upstream commit dbc3171194403d0d40e4bdeae666f6e76e428b53 ]
If pcie_find_root_port() is unable to locate a Root Port, it will return
NULL. Check the pointer for NULL before dereferencing it.
This particular case is in a quirk for devices that are always below a Root
Port, so this won't avoid a problem and doesn't need to be backported, but
check as a matter of style and to prevent copy/paste mistakes.
Link: https://lore.kernel.org/r/20240812202659.1649121-1-samasth.norway.ananda@oracle.com
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
[bhelgaas: drop Fixes: and explain why there's no problem in this case]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aaron Lu <aaron.lu@intel.com>
Date: Thu Sep 5 16:08:54 2024 +0800
x86/sgx: Fix deadlock in SGX NUMA node search
[ Upstream commit 9c936844010466535bd46ea4ce4656ef17653644 ]
When the current node doesn't have an EPC section configured by firmware
and all other EPC sections are used up, CPU can get stuck inside the
while loop that looks for an available EPC page from remote nodes
indefinitely, leading to a soft lockup. Note how nid_of_current will
never be equal to nid in that while loop because nid_of_current is not
set in sgx_numa_mask.
Also worth mentioning is that it's perfectly fine for the firmware not
to setup an EPC section on a node. While setting up an EPC section on
each node can enhance performance, it is not a requirement for
functionality.
Rework the loop to start and end on *a* node that has SGX memory. This
avoids the deadlock looking for the current SGX-lacking node to show up
in the loop when it never will.
Fixes: 901ddbb9ecf5 ("x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()")
Reported-by: "Molina Sabido, Gerardo" <gerardo.molina.sabido@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Zhimin Luo <zhimin.luo@intel.com>
Link: https://lore.kernel.org/all/20240905080855.1699814-2-aaron.lu%40intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jun 14 12:58:54 2024 +0300
x86/tdx: Account shared memory
[ Upstream commit c3abbf1376874f0d6eb22859a8655831644efa42 ]
The kernel will convert all shared memory back to private during kexec.
The direct mapping page tables will provide information on which memory
is shared.
It is extremely important to convert all shared memory. If a page is
missed, it will cause the second kernel to crash when it accesses it.
Keep track of the number of shared pages. This will allow for
cross-checking against the shared information in the direct mapping and
reporting if the shared bit is lost.
Memory conversion is slow and does not happen often. Global atomic is
not going to be a bottleneck.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-10-kirill.shutemov@linux.intel.com
Stable-dep-of: d4fc4d014715 ("x86/tdx: Fix "in-kernel MMIO" check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date: Fri Jun 14 12:58:56 2024 +0300
x86/tdx: Convert shared memory back to private on kexec
[ Upstream commit 859e63b789d6b17b3c64e51a0aabdc58752a0254 ]
TDX guests allocate shared buffers to perform I/O. It is done by allocating
pages normally from the buddy allocator and converting them to shared with
set_memory_decrypted().
The second, kexec-ed kernel has no idea what memory is converted this way. It
only sees E820_TYPE_RAM.
Accessing shared memory via private mapping is fatal. It leads to unrecoverable
TD exit.
On kexec, walk direct mapping and convert all shared memory back to private. It
makes all RAM private again and second kernel may use it normally.
The conversion occurs in two steps: stopping new conversions and unsharing all
memory. In the case of normal kexec, the stopping of conversions takes place
while scheduling is still functioning. This allows for waiting until any ongoing
conversions are finished. The second step is carried out when all CPUs except one
are inactive and interrupts are disabled. This prevents any conflicts with code
that may access shared memory.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Tested-by: Tao Liu <ltao@redhat.com>
Link: https://lore.kernel.org/r/20240614095904.1345461-12-kirill.shutemov@linux.intel.com
Stable-dep-of: d4fc4d014715 ("x86/tdx: Fix "in-kernel MMIO" check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Alexey Gladkov (Intel) <legion@kernel.org>
Date: Fri Sep 13 19:05:56 2024 +0200
x86/tdx: Fix "in-kernel MMIO" check
[ Upstream commit d4fc4d01471528da8a9797a065982e05090e1d81 ]
TDX only supports kernel-initiated MMIO operations. The handle_mmio()
function checks if the #VE exception occurred in the kernel and rejects
the operation if it did not.
However, userspace can deceive the kernel into performing MMIO on its
behalf. For example, if userspace can point a syscall to an MMIO address,
syscall does get_user() or put_user() on it, triggering MMIO #VE. The
kernel will treat the #VE as in-kernel MMIO.
Ensure that the target MMIO address is within the kernel before decoding
instruction.
Fixes: 31d58c4e557d ("x86/tdx: Handle in-kernel MMIO")
Signed-off-by: Alexey Gladkov (Intel) <legion@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/565a804b80387970460a4ebc67c88d1380f61ad1.1726237595.git.legion%40kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Fri Sep 13 12:05:02 2024 +0200
xen/swiotlb: add alignment check for dma buffers
[ Upstream commit 9f40ec84a7976d95c34e7cc070939deb103652b0 ]
When checking a memory buffer to be consecutive in machine memory,
the alignment needs to be checked, too. Failing to do so might result
in DMA memory not being aligned according to its requested size,
leading to error messages like:
4xxx 0000:2b:00.0: enabling device (0140 -> 0142)
4xxx 0000:2b:00.0: Ring address not aligned
4xxx 0000:2b:00.0: Failed to initialise service qat_crypto
4xxx 0000:2b:00.0: Resetting device qat_dev0
4xxx: probe of 0000:2b:00.0 failed with error -14
Fixes: 9435cce87950 ("xen/swiotlb: Add support for 64KB page granularity")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Sun Sep 15 13:06:44 2024 +0200
xen/swiotlb: fix allocated size
[ Upstream commit c3dea3d54f4d399f8044547f0f1abdccbdfb0fee ]
The allocated size in xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() is calculated wrong for the case of
XEN_PAGE_SIZE not matching PAGE_SIZE. Fix that.
Fixes: 7250f422da04 ("xen-swiotlb: use actually allocated size on check physical continuous")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Wed Aug 14 16:47:25 2024 +0200
xen: add capability to remap non-RAM pages to different PFNs
[ Upstream commit d05208cf7f05420ad10cc7f9550f91d485523659 ]
When running as a Xen PV dom0 it can happen that the kernel is being
loaded to a guest physical address conflicting with the host memory
map.
In order to be able to resolve this conflict, add the capability to
remap non-RAM areas to different guest PFNs. A function to use this
remapping information for other purposes than doing the remap will be
added when needed.
As the number of conflicts should be rather low (currently only
machines with max. 1 conflict are known), save the remap data in a
small statically allocated array.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: be35d91c8880 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Fri Aug 9 17:52:55 2024 +0200
xen: allow mapping ACPI data using a different physical address
commit 9221222c717dbddac1e3c49906525475d87a3a44 upstream.
When running as a Xen PV dom0 the system needs to map ACPI data of the
host using host physical addresses, while those addresses can conflict
with the guest physical addresses of the loaded linux kernel. The same
problem might apply in case a PV guest is configured to use the host
memory map.
This conflict can be solved by mapping the ACPI data to a different
guest physical address, but mapping the data via acpi_os_ioremap()
must still be possible using the host physical address, as this
address might be generated by AML when referencing some of the ACPI
data.
When configured to support running as a Xen PV domain, have an
implementation of acpi_os_ioremap() being aware of the possibility to
need above mentioned translation of a host physical address to the
guest physical address.
This modification requires to #include linux/acpi.h in some sources
which need to include asm/acpi.h directly.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Juergen Gross <jgross@suse.com>
Date: Fri Aug 2 14:11:06 2024 +0200
xen: introduce generic helper checking for memory map conflicts
[ Upstream commit ba88829706e2c5b7238638fc2b0713edf596495e ]
When booting as a Xen PV dom0 the memory layout of the dom0 is
modified to match that of the host, as this requires less changes in
the kernel for supporting Xen.
There are some cases, though, which are problematic, as it is the Xen
hypervisor selecting the kernel's load address plus some other data,
which might conflict with the host's memory map.
These conflicts are detected at boot time and result in a boot error.
In order to support handling at least some of these conflicts in
future, introduce a generic helper function which will later gain the
ability to adapt the memory layout when possible.
Add the missing check for the xen_start_info area.
Note that possible p2m map and initrd memory conflicts are handled
already by copying the data to memory areas not conflicting with the
memory map. The initial stack allocated by Xen doesn't need to be
checked, as early boot code is switching to the statically allocated
initial kernel stack. Initial page tables and the kernel itself will
be handled later.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: be35d91c8880 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Tue Aug 6 09:56:48 2024 +0200
xen: move checks for e820 conflicts further up
commit c4498ae316da5b5786ccd448fc555f3339b8e4ca upstream.
Move the checks for e820 memory map conflicts using the
xen_chk_is_e820_usable() helper further up in order to prepare
resolving some of the possible conflicts by doing some e820 map
modifications, which must happen before evaluating the RAM layout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Juergen Gross <jgross@suse.com>
Date: Tue Aug 6 10:24:41 2024 +0200
xen: move max_pfn in xen_memory_setup() out of function scope
[ Upstream commit 43dc2a0f479b9cd30f6674986d7a40517e999d31 ]
Instead of having max_pfn as a local variable of xen_memory_setup(),
make it a static variable in setup.c instead. This avoids having to
pass it to subfunctions, which will be needed in more cases in future.
Rename it to ini_nr_pages, as the value denotes the currently usable
number of memory pages as passed from the hypervisor at boot time.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Stable-dep-of: be35d91c8880 ("xen: tolerate ACPI NVS memory overlapping with Xen allocated memory")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Fri Aug 2 20:14:22 2024 +0200
xen: tolerate ACPI NVS memory overlapping with Xen allocated memory
[ Upstream commit be35d91c8880650404f3bf813573222dfb106935 ]
In order to minimize required special handling for running as Xen PV
dom0, the memory layout is modified to match that of the host. This
requires to have only RAM at the locations where Xen allocated memory
is living. Unfortunately there seem to be some machines, where ACPI
NVS is located at 64 MB, resulting in a conflict with the loaded
kernel or the initial page tables built by Xen.
Avoid this conflict by swapping the ACPI NVS area in the memory map
with unused RAM. This is possible via modification of the dom0 P2M map.
Accesses to the ACPI NVS area are done either for saving and restoring
it across suspend operations (this will work the same way as before),
or by ACPI code when NVS memory is referenced from other ACPI tables.
The latter case is handled by a Xen specific indirection of
acpi_os_ioremap().
While the E820 map can (and should) be modified right away, the P2M
map can be updated only after memory allocation is working, as the P2M
map might need to be extended.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Sat Aug 3 08:01:22 2024 +0200
xen: use correct end address of kernel for conflict checking
[ Upstream commit fac1bceeeb04886fc2ee952672e6e6c85ce41dca ]
When running as a Xen PV dom0 the kernel is loaded by the hypervisor
using a different memory map than that of the host. In order to
minimize the required changes in the kernel, the kernel adapts its
memory map to that of the host. In order to do that it is checking
for conflicts of its load address with the host memory map.
Unfortunately the tested memory range does not include the .brk
area, which might result in crashes or memory corruption when this
area does conflict with the memory map of the host.
Fix the test by using the _end label instead of __bss_stop.
Fixes: 808fdb71936c ("xen: check for kernel memory conflicting with memory layout")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Daehwan Jung <dh10.jung@samsung.com>
Date: Mon Jun 10 20:39:12 2024 +0900
xhci: Add a quirk for writing ERST in high-low order
[ Upstream commit bc162403e33e1d57e40994977acaf19f1434e460 ]
This quirk is for the controller that has a limitation in supporting
separate ERSTBA_HI and ERSTBA_LO programming. It's supported when
the ERSTBA is programmed ERSTBA_HI before ERSTBA_LO. That's because
the internal initialization of event ring fetches the
"Event Ring Segment Table Entry" based on the indication of ERSTBA_LO
written.
Signed-off-by: Daehwan Jung <dh10.jung@samsung.com>
Link: https://lore.kernel.org/r/1718019553-111939-3-git-send-email-dh10.jung@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: e5fa8db0be3e ("usb: xhci: fix loss of data on Cadence xHC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Thu Sep 5 17:32:59 2024 +0300
xhci: Set quirky xHC PCI hosts to D3 _after_ stopping and freeing them.
commit f81dfa3b57c624c56f2bff171c431bc7f5b558f2 upstream.
PCI xHC host should be stopped and xhci driver memory freed before putting
host to PCI D3 state during PCI remove callback.
Hosts with XHCI_SPURIOUS_WAKEUP quirk did this the wrong way around
and set the host to D3 before calling usb_hcd_pci_remove(dev), which will
access the host to stop it, and then free xhci.
Fixes: f1f6d9a8b540 ("xhci: don't dereference a xhci member after removing xhci")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240905143300.1959279-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Date: Wed Sep 11 21:10:19 2024 +0200
xsk: fix batch alloc API on non-coherent systems
[ Upstream commit 4144a1059b47e821c82c3c82eb23a4c7312dce3a ]
In cases when synchronizing DMA operations is necessary,
xsk_buff_alloc_batch() returns a single buffer instead of the requested
count. This puts the pressure on drivers that use batch API as they have
to check for this corner case on their side and take care of allocations
by themselves, which feels counter productive. Let us improve the core
by looping over xp_alloc() @max times when slow path needs to be taken.
Another issue with current interface, as spotted and fixed by Dries, was
that when driver called xsk_buff_alloc_batch() with @max == 0, for slow
path case it still allocated and returned a single buffer, which should
not happen. By introducing the logic from first paragraph we kill two
birds with one stone and address this problem as well.
Fixes: 47e4075df300 ("xsk: Batched buffer allocation for the pool")
Reported-and-tested-by: Dries De Winter <ddewinter@synamedia.com>
Co-developed-by: Dries De Winter <ddewinter@synamedia.com>
Signed-off-by: Dries De Winter <ddewinter@synamedia.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20240911191019.296480-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lasse Collin <lasse.collin@tukaani.org>
Date: Sun Jul 21 16:36:24 2024 +0300
xz: cleanup CRC32 edits from 2018
[ Upstream commit 2ee96abef214550d9e92f5143ee3ac1fd1323e67 ]
In 2018, a dependency on <linux/crc32poly.h> was added to avoid
duplicating the same constant in multiple files. Two months later it was
found to be a bad idea and the definition of CRC32_POLY_LE macro was moved
into xz_private.h to avoid including <linux/crc32poly.h>.
xz_private.h is a wrong place for it too. Revert back to the upstream
version which has the poly in xz_crc32_init() in xz_crc32.c.
Link: https://lkml.kernel.org/r/20240721133633.47721-10-lasse.collin@tukaani.org
Fixes: faa16bc404d7 ("lib: Use existing define with polynomial")
Fixes: 242cdad873a7 ("lib/xz: Put CRC32_POLY_LE in xz_private.h")
Signed-off-by: Lasse Collin <lasse.collin@tukaani.org>
Reviewed-by: Sam James <sam@gentoo.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jubin Zhong <zhongjubin@huawei.com>
Cc: Jules Maselbas <jmaselbas@zdiv.net>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rui Li <me@lirui.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>