Author: Rengarajan S <rengarajan.s@microchip.com>
Date: Wed Dec 18 15:10:17 2024 +0530
8250: microchip: pci1xxxx: Add workaround for RTS bit toggle
[ Upstream commit e95cb63e57381f00d9274533ea7fd0ac3bf4e5b0 ]
In the B0 revision, the RTS pin remains high due to incorrect hardware
mapping. To address this issue, enable auto-direction control with the
RTS bit in ADCL_CFG_REG. This configuration ensures that the RTS pin
goes low when the terminal is opened and high when the terminal is
closed. Additionally, we reset the step counter for Rx and Tx engines
by writing into FRAC_DIV_CFG_REG.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20241218094017.18290-1-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Thu Jan 23 14:22:02 2025 +0100
ACPI: x86: Add skip i2c clients quirk for Vexia EDU ATLA 10 tablet 5V
[ Upstream commit 8f62ca9c338aae4f73e9ce0221c3d4668359ddd8 ]
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both ship with Android 4.4 as factory OS and have the usual broken DSDT
issues for x86 Android tablets.
Add a quirk to skip ACPI I2C client enumeration for the 5V version to
complement the existing quirk for the 9V version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250123132202.18209-1-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ivan Kokshaysky <ink@unseen.parts>
Date: Tue Feb 4 23:35:24 2025 +0100
alpha: align stack for page fault and user unaligned trap handlers
commit 3b35a171060f846b08b48646b38c30b5d57d17ff upstream.
do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ivan Kokshaysky <ink@unseen.parts>
Date: Tue Feb 4 23:35:23 2025 +0100
alpha: make stack 16-byte aligned (most cases)
commit 0a0f7362b0367634a2d5cb7c96226afc116f19c9 upstream.
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Link: https://lore.kernel.org/rcu/alpine.DEB.2.21.2501130248010.18889@angie.orcam.me.uk/ [1]
Link: https://bitsavers.org/pdf/dec/alpha/Alpha_Calling_Standard_Rev_2.0_19900427.pdf [2]
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ivan Kokshaysky <ink@unseen.parts>
Date: Tue Feb 4 23:35:22 2025 +0100
alpha: replace hardcoded stack offsets with autogenerated ones
commit 77b823fa619f97d16409ca37ad4f7936e28c5f83 upstream.
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Zhu Lingshan <lingshan.zhu@amd.com>
Date: Sun Jan 26 17:21:10 2025 +0800
amdkfd: properly free gang_ctx_bo when failed to init user queue
[ Upstream commit a33f7f9660705fb2ecf3467b2c48965564f392ce ]
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Radu Rendec <rrendec@redhat.com>
Date: Thu Feb 6 12:44:20 2025 -0500
arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array
[ Upstream commit 875d742cf5327c93cba1f11e12b08d3cce7a88d2 ]
The loop that detects/populates cache information already has a bounds
check on the array size but does not account for cache levels with
separate data/instructions cache. Fix this by incrementing the index
for any populated leaf (instead of any populated level).
Fixes: 5d425c186537 ("arm64: kernel: add support for cpu cache information")
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Link: https://lore.kernel.org/r/20250206174420.2178724-1-rrendec@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Thu Feb 6 10:21:38 2025 -0700
arm64: Handle .ARM.attributes section in linker scripts
commit ca0f4fe7cf7183bfbdc67ca2de56ae1fc3a8db2b upstream.
A recent LLVM commit [1] started generating an .ARM.attributes section
similar to the one that exists for 32-bit, which results in orphan
section warnings (or errors if CONFIG_WERROR is enabled) from the linker
because it is not handled in the arm64 linker scripts.
ld.lld: error: arch/arm64/kernel/vdso/vgettimeofday.o:(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: arch/arm64/kernel/vdso/vgetrandom.o:(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/vsprintf.o):(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/win_minmax.o):(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/xarray.o):(.ARM.attributes) is being placed in '.ARM.attributes'
Discard the new sections in the necessary linker scripts to resolve the
warnings, as the kernel and vDSO do not need to retain it, similar to
the .note.gnu.property section.
Cc: stable@vger.kernel.org
Fixes: b3e5d80d0c48 ("arm64/build: Warn on orphan section placement")
Link: https://github.com/llvm/llvm-project/commit/ee99c4d4845db66c4daa2373352133f4b237c942 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250206-arm64-handle-arm-attributes-in-linker-script-v3-1-d53d169913eb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Mon Feb 10 17:37:32 2025 +0100
arm64: rust: clean Rust 1.85.0 warning using softfloat target
commit 446a8351f160d65a1c5df7097f31c74102ed2bb1 upstream.
Starting with Rust 1.85.0 (to be released 2025-02-20), `rustc` warns
[1] about disabling neon in the aarch64 hardfloat target:
warning: target feature `neon` cannot be toggled with
`-Ctarget-feature`: unsound on hard-float targets
because it changes float ABI
|
= note: this was previously accepted by the compiler but
is being phased out; it will become a hard error
in a future release!
= note: for more information, see issue #116344
<https://github.com/rust-lang/rust/issues/116344>
Thus, instead, use the softfloat target instead.
While trying it out, I found that the kernel sanitizers were not enabled
for that built-in target [2]. Upstream Rust agreed to backport
the enablement for the current beta so that it is ready for
the 1.85.0 release [3] -- thanks!
However, that still means that before Rust 1.85.0, we cannot switch
since sanitizers could be in use. Thus conditionally do so.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Matthew Maurer <mmaurer@google.com>
Cc: Alice Ryhl <aliceryhl@google.com>
Cc: Ralf Jung <post@ralfj.de>
Cc: Jubilee Young <workingjubilee@gmail.com>
Link: https://github.com/rust-lang/rust/pull/133417 [1]
Link: https://rust-lang.zulipchat.com/#narrow/channel/131828-t-compiler/topic/arm64.20neon.20.60-Ctarget-feature.60.20warning/near/495358442 [2]
Link: https://github.com/rust-lang/rust/pull/135905 [3]
Link: https://github.com/rust-lang/rust/issues/116344
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Tested-by: Matthew Maurer <mmaurer@google.com>
Reviewed-by: Ralf Jung <post@ralfj.de>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250210163732.281786-1-ojeda@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:36 2025 +0000
arp: use RCU protection in arp_xmit()
[ Upstream commit a42b69f692165ec39db42d595f4f65a4c8f42e44 ]
arp_xmit() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF.
Fixes: 29a26a568038 ("netfilter: Pass struct net into the netfilter hooks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hans de Goede <hdegoede@redhat.com>
Date: Thu Jan 23 14:25:07 2025 +0100
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Vexia Edu Atla 10 tablet 5V
[ Upstream commit 6917192378c1ce17ba31df51c4e0d8b1c97a453b ]
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
The 5V version mostly works with the BYTCR defaults, except that it is
missing a CHAN package in its ACPI tables and the default of using
SSP0-AIF2 is wrong, instead SSP0-AIF1 must be used. That and its jack
detect signal is not inverted as it usually is.
Add a DMI quirk for the 5V version to fix sound not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20250123132507.18434-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Murad Masimov <m.masimov@mt-integration.ru>
Date: Mon Feb 3 12:12:03 2025 +0300
ax25: Fix refcount leak caused by setting SO_BINDTODEVICE sockopt
[ Upstream commit bca0902e61731a75fc4860c8720168d9f1bae3b6 ]
If an AX25 device is bound to a socket by setting the SO_BINDTODEVICE
socket option, a refcount leak will occur in ax25_release().
Commit 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
added decrement of device refcounts in ax25_release(). In order for that
to work correctly the refcounts must already be incremented when the
device is bound to the socket. An AX25 device can be bound to a socket
by either calling ax25_bind() or setting SO_BINDTODEVICE socket option.
In both cases the refcounts should be incremented, but in fact it is done
only in ax25_bind().
This bug leads to the following issue reported by Syzkaller:
================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 1 PID: 5932 at lib/refcount.c:31 refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Modules linked in:
CPU: 1 UID: 0 PID: 5932 Comm: syz-executor424 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0x1ed/0x210 lib/refcount.c:31
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x710/0x820 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4156 [inline]
netdev_put include/linux/netdevice.h:4173 [inline]
netdev_put include/linux/netdevice.h:4169 [inline]
ax25_release+0x33f/0xa10 net/ax25/af_ax25.c:1069
__sock_release+0xb0/0x270 net/socket.c:640
sock_close+0x1c/0x30 net/socket.c:1408
...
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Fix the implementation of ax25_setsockopt() by adding increment of
refcounts for the new device bound, and decrement of refcounts for
the old unbound device.
Fixes: 9fd75b66b8f6 ("ax25: Fix refcount leaks caused by ax25_cb_del()")
Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20250203091203.1744-1-m.masimov@mt-integration.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Mon Jan 20 00:06:11 2025 +0100
batman-adv: Drop unmanaged ELP metric worker
commit 8c8ecc98f5c65947b0070a24bac11e12e47cc65d upstream.
The ELP worker needs to calculate new metric values for all neighbors
"reachable" over an interface. Some of the used metric sources require
locks which might need to sleep. This sleep is incompatible with the RCU
list iterator used for the recorded neighbors. The initial approach to work
around of this problem was to queue another work item per neighbor and then
run this in a new context.
Even when this solved the RCU vs might_sleep() conflict, it has a major
problems: Nothing was stopping the work item in case it is not needed
anymore - for example because one of the related interfaces was removed or
the batman-adv module was unloaded - resulting in potential invalid memory
accesses.
Directly canceling the metric worker also has various problems:
* cancel_work_sync for a to-be-deactivated interface is called with
rtnl_lock held. But the code in the ELP metric worker also tries to use
rtnl_lock() - which will never return in this case. This also means that
cancel_work_sync would never return because it is waiting for the worker
to finish.
* iterating over the neighbor list for the to-be-deactivated interface is
currently done using the RCU specific methods. Which means that it is
possible to miss items when iterating over it without the associated
spinlock - a behaviour which is acceptable for a periodic metric check
but not for a cleanup routine (which must "stop" all still running
workers)
The better approch is to get rid of the per interface neighbor metric
worker and handle everything in the interface worker. The original problems
are solved by:
* creating a list of neighbors which require new metric information inside
the RCU protected context, gathering the metric according to the new list
outside the RCU protected context
* only use rcu_trylock inside metric gathering code to avoid a deadlock
when the cancel_delayed_work_sync is called in the interface removal code
(which is called with the rtnl_lock held)
Cc: stable@vger.kernel.org
Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Strohman <andrew@andrewstrohman.com>
Date: Thu Jan 9 02:27:56 2025 +0000
batman-adv: fix panic during interface removal
commit ccb7276a6d26d6f8416e315b43b45e15ee7f29e2 upstream.
Reference counting is used to ensure that
batadv_hardif_neigh_node and batadv_hard_iface
are not freed before/during
batadv_v_elp_throughput_metric_update work is
finished.
But there isn't a guarantee that the hard if will
remain associated with a soft interface up until
the work is finished.
This fixes a crash triggered by reboot that looks
like this:
Call trace:
batadv_v_mesh_free+0xd0/0x4dc [batman_adv]
batadv_v_elp_throughput_metric_update+0x1c/0xa4
process_one_work+0x178/0x398
worker_thread+0x2e8/0x4d0
kthread+0xd8/0xdc
ret_from_fork+0x10/0x20
(the batadv_v_mesh_free call is misleading,
and does not actually happen)
I was able to make the issue happen more reliably
by changing hardif_neigh->bat_v.metric_work work
to be delayed work. This allowed me to track down
and confirm the fix.
Cc: stable@vger.kernel.org
Fixes: c833484e5f38 ("batman-adv: ELP - compute the metric based on the estimated throughput")
Signed-off-by: Andy Strohman <andrew@andrewstrohman.com>
[sven@narfation.org: prevent entering batadv_v_elp_get_throughput without
soft_iface]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sven Eckelmann <sven@narfation.org>
Date: Mon Jan 20 20:35:28 2025 +0100
batman-adv: Ignore neighbor throughput metrics in error case
commit e7e34ffc976aaae4f465b7898303241b81ceefc3 upstream.
If a temporary error happened in the evaluation of the neighbor throughput
information, then the invalid throughput result should not be stored in the
throughtput EWMA.
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Thu Feb 13 08:18:46 2025 -0700
block: cleanup and fix batch completion adding conditions
[ Upstream commit 1f47ed294a2bd577d5ae43e6e28e1c9a3be4a833 ]
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f26 ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kiran K <kiran.k@intel.com>
Date: Fri Jan 31 18:30:19 2025 +0530
Bluetooth: btintel_pcie: Fix a potential race condition
[ Upstream commit 872274b992839ff64fe560767fe7ee5f942ccdb1 ]
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f029 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jason Xing <kernelxing@tencent.com>
Date: Tue Oct 29 15:46:27 2024 +0800
bpf: handle implicit declaration of function gettid in bpf_iter.c
commit 42602e3a06f8e5b9a059344e305c9bee2dcc87c8 upstream.
As we can see from the title, when I compiled the selftests/bpf, I
saw the error:
implicit declaration of function ‘gettid’ ; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
skel->bss->tid = gettid();
^~~~~~
getgid
Directly call the syscall solves this issue.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20241029074627.80289-1-kerneljasonxing@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Wed Feb 5 17:36:48 2025 +0000
btrfs: fix hole expansion when writing at an offset beyond EOF
commit da2dccd7451de62b175fb8f0808d644959e964c7 upstream.
At btrfs_write_check() if our file's i_size is not sector size aligned and
we have a write that starts at an offset larger than the i_size that falls
within the same page of the i_size, then we end up not zeroing the file
range [i_size, write_offset).
The code is this:
start_pos = round_down(pos, fs_info->sectorsize);
oldsize = i_size_read(inode);
if (start_pos > oldsize) {
/* Expand hole size to cover write data, preventing empty gap */
loff_t end_pos = round_up(pos + count, fs_info->sectorsize);
ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos);
if (ret)
return ret;
}
So if our file's i_size is 90269 bytes and a write at offset 90365 bytes
comes in, we get 'start_pos' set to 90112 bytes, which is less than the
i_size and therefore we don't zero out the range [90269, 90365) by
calling btrfs_cont_expand().
This is an old bug introduced in commit 9036c10208e1 ("Btrfs: update hole
handling v2"), from 2008, and the buggy code got moved around over the
years.
Fix this by discarding 'start_pos' and comparing against the write offset
('pos') without any alignment.
This bug was recently exposed by test case generic/363 which tests this
scenario by polluting ranges beyond EOF with an mmap write and than verify
that after a file increases we get zeroes for the range which is supposed
to be a hole and not what we wrote with the previous mmaped write.
We're only seeing this exposed now because generic/363 used to run only
on xfs until last Sunday's fstests update.
The test was failing like this:
$ ./check generic/363
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad)
# --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000
# +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000
@@ -1 +1,46 @@
QA output created by 363
+READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk
+OFFSET GOOD BAD RANGE
+0x1609d 0x0000 0x3104 0x0
+operation# (mod 256) for the bad data may be 4
+0x1609e 0x0000 0x0472 0x1
+operation# (mod 256) for the bad data may be 4
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
Fixes: 9036c10208e1 ("Btrfs: update hole handling v2")
CC: stable@vger.kernel.org
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Filipe Manana <fdmanana@suse.com>
Date: Tue Feb 4 11:02:32 2025 +0000
btrfs: fix stale page cache after race between readahead and direct IO write
[ Upstream commit acc18e1c1d8c0d59d793cf87790ccfcafb1bf5f0 ]
After commit ac325fc2aad5 ("btrfs: do not hold the extent lock for entire
read") we can now trigger a race between a task doing a direct IO write
and readahead. When this race is triggered it results in tasks getting
stale data when they attempt do a buffered read (including the task that
did the direct IO write).
This race can be sporadically triggered with test case generic/418, failing
like this:
$ ./check generic/418
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad)
# --- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100
# +++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000
@@ -1,2 +1,5 @@
QA output created by 418
+cmpbuf: offset 0: Expected: 0x1, got 0x0
+[6:0] FAIL - comparison failed, offset 24576
+diotest -wp -b 4096 -n 8 -i 4 failed at loop 3
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff)
Ran: generic/418
Failures: generic/418
Failed 1 of 1 tests
The race happens like this:
1) A file has a prealloc extent for the range [16K, 28K);
2) Task A starts a direct IO write against file range [24K, 28K).
At the start of the direct IO write it invalidates the page cache at
__iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file
offset 24K;
3) Task A enters btrfs_dio_iomap_begin() and locks the extent range
[24K, 28K);
4) Task B starts a readahead for file range [16K, 28K), entering
btrfs_readahead().
First it attempts to read the page at offset 16K by entering
btrfs_do_readpage(), where it calls get_extent_map(), locks the range
[16K, 20K) and gets the extent map for the range [16K, 28K), caching
it into the 'em_cached' variable declared in the local stack of
btrfs_readahead(), and then unlocks the range [16K, 20K).
Since the extent map has the prealloc flag, at btrfs_do_readpage() we
zero out the page's content and don't submit any bio to read the page
from the extent.
Then it attempts to read the page at offset 20K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous page, we zero out the page's content since
the extent map has the prealloc flag set.
Then it attempts to read the page at offset 24K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous pages, we zero out the page's content since
the extent map has the prealloc flag set. Note that we didn't lock the
extent range [24K, 28K), so we didn't synchronize with the ongoing
direct IO write being performed by task A;
5) Task A enters btrfs_create_dio_extent() and creates an ordered extent
for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and
BTRFS_ORDERED_PREALLOC set;
6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin();
7) The ordered extent enters btrfs_finish_one_ordered() and locks the
range [24K, 28K);
8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries
to invalidate the page at offset 24K by calling
kiocb_invalidate_post_direct_write(), resulting in a call chain that
ends up at btrfs_release_folio().
The btrfs_release_folio() call ends up returning false because the range
for the page at file offset 24K is currently locked by the task doing
the ordered extent completion in the previous step (7), so we have:
btrfs_release_folio() ->
__btrfs_release_folio() ->
try_release_extent_mapping() ->
try_release_extent_state()
This last function checking that the range is locked and returning false
and propagating it up to btrfs_release_folio().
So this results in a failure to invalidate the page and
kiocb_invalidate_post_direct_write() triggers this message logged in
dmesg:
Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!
After this we leave the page cache with stale data for the file range
[24K, 28K), filled with zeroes instead of the data written by direct IO
write (all bytes with a 0x01 value), so any task attempting to read with
buffered IO, including the task that did the direct IO write, will get
all bytes in the range with a 0x00 value instead of the written data.
Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(),
at the two callers of btrfs_do_readpage() instead of doing it at
get_extent_map(), just like we did before commit ac325fc2aad5 ("btrfs: do
not hold the extent lock for entire read"), and unlocking the range after
all the calls to btrfs_do_readpage(). This way we never reuse a cached
extent map without flushing any pending ordered extents from a concurrent
direct IO write.
Fixes: ac325fc2aad5 ("btrfs: do not hold the extent lock for entire read")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: David Sterba <dsterba@suse.com>
Date: Thu Jan 9 11:24:15 2025 +0100
btrfs: rename __get_extent_map() and pass btrfs_inode
[ Upstream commit 06de96faf795b5c276a3be612da6b08c6112e747 ]
The double underscore naming scheme does not apply here, there's only
only get_extent_map(). As the definition is changed also pass the struct
btrfs_inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: acc18e1c1d8c ("btrfs: fix stale page cache after race between readahead and direct IO write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Sun Jan 12 13:41:52 2025 +0100
can: c_can: fix unbalanced runtime PM disable in error path
commit 257a2cd3eb578ee63d6bf90475dc4f4b16984139 upstream.
Runtime PM is enabled as one of the last steps of probe(), so all
earlier gotos to "exit_free_device" label were not correct and were
leading to unbalanced runtime PM disable depth.
Fixes: 6e2fe01dd6f9 ("can: c_can: move runtime PM enable/disable to c_can_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fedor Pchelkin <pchelkin@ispras.ru>
Date: Tue Jan 14 18:21:38 2025 +0300
can: ctucanfd: handle skb allocation failure
commit 9bd24927e3eeb85642c7baa3b28be8bea6c2a078 upstream.
If skb allocation fails, the pointer to struct can_frame is NULL. This
is actually handled everywhere inside ctucan_err_interrupt() except for
the only place.
Add the missed NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250114152138.139580-1-pchelkin@ispras.ru
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Date: Wed Feb 5 00:48:15 2025 +0900
can: etas_es58x: fix potential NULL pointer dereference on udev->serial
commit a1ad2109ce41c9e3912dadd07ad8a9c640064ffb upstream.
The driver assumed that es58x_dev->udev->serial could never be NULL.
While this is true on commercially available devices, an attacker
could spoof the device identity providing a NULL USB serial number.
That would trigger a NULL pointer dereference.
Add a check on es58x_dev->udev->serial before accessing it.
Reported-by: yan kang <kangyan91@outlook.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/linux-can/SY8P300MB0421E0013C0EBD2AA46BA709A1F42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/
Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()")
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250204154859.9797-2-mailhol.vincent@wanadoo.fr
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alexander Hölzl <alexander.hoelzl@gmx.net>
Date: Wed Feb 5 18:46:51 2025 +0100
can: j1939: j1939_sk_send_loop(): fix unable to send messages with data length zero
commit 44de577e61ed239db09f0da9d436866bef9b77dd upstream.
The J1939 standard requires the transmission of messages of length 0.
For example proprietary messages are specified with a data length of 0
to 1785. The transmission of such messages is not possible. Sending
results in no error being returned but no corresponding can frame
being generated.
Enable the transmission of zero length J1939 messages. In order to
facilitate this two changes are necessary:
1) If the transmission of a new message is requested from user space
the message is segmented in j1939_sk_send_loop(). Let the segmentation
take into account zero length messages, do not terminate immediately,
queue the corresponding skb.
2) j1939_session_skb_get_by_offset() selects the next skb to transmit
for a session. Take into account that there might be zero length skbs
in the queue.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
[mkl: commit message rephrased]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Robin van der Gracht <robin@protonic.nl>
Date: Mon Jan 27 13:16:44 2025 +0100
can: rockchip: rkcanfd_handle_rx_fifo_overflow_int(): bail out if skb cannot be allocated
commit f7f0adfe64de08803990dc4cbecd2849c04e314a upstream.
Fix NULL pointer check in rkcanfd_handle_rx_fifo_overflow_int() to
bail out if skb cannot be allocated.
Fixes: ff60bfbaf67f ("can: rockchip_canfd: add driver for Rockchip CAN-FD controller")
Cc: stable@vger.kernel.org
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Link: https://patch.msgid.link/20250208-fix-rockchip-canfd-v1-1-ec533c8a9895@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shakeel Butt <shakeel.butt@linux.dev>
Date: Thu Jan 30 16:05:42 2025 -0800
cgroup: fix race between fork and cgroup.kill
commit b69bb476dee99d564d65d418e9a20acca6f32c3f upstream.
Tejun reported the following race between fork() and cgroup.kill at [1].
Tejun:
I was looking at cgroup.kill implementation and wondering whether there
could be a race window. So, __cgroup_kill() does the following:
k1. Set CGRP_KILL.
k2. Iterate tasks and deliver SIGKILL.
k3. Clear CGRP_KILL.
The copy_process() does the following:
c1. Copy a bunch of stuff.
c2. Grab siglock.
c3. Check fatal_signal_pending().
c4. Commit to forking.
c5. Release siglock.
c6. Call cgroup_post_fork() which puts the task on the css_set and tests
CGRP_KILL.
The intention seems to be that either a forking task gets SIGKILL and
terminates on c3 or it sees CGRP_KILL on c6 and kills the child. However, I
don't see what guarantees that k3 can't happen before c6. ie. After a
forking task passes c5, k2 can take place and then before the forking task
reaches c6, k3 can happen. Then, nobody would send SIGKILL to the child.
What am I missing?
This is indeed a race. One way to fix this race is by taking
cgroup_threadgroup_rwsem in write mode in __cgroup_kill() as the fork()
side takes cgroup_threadgroup_rwsem in read mode from cgroup_can_fork()
to cgroup_post_fork(). However that would be heavy handed as this adds
one more potential stall scenario for cgroup.kill which is usually
called under extreme situation like memory pressure.
To fix this race, let's maintain a sequence number per cgroup which gets
incremented on __cgroup_kill() call. On the fork() side, the
cgroup_can_fork() will cache the sequence number locally and recheck it
against the cgroup's sequence number at cgroup_post_fork() site. If the
sequence numbers mismatch, it means __cgroup_kill() can been called and
we should send SIGKILL to the newly created task.
Reported-by: Tejun Heo <tj@kernel.org>
Closes: https://lore.kernel.org/all/Z5QHE2Qn-QZ6M-KW@slm.duckdns.org/ [1]
Fixes: 661ee6280931 ("cgroup: introduce cgroup.kill")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Muhammad Adeel <Muhammad.Adeel@ibm.com>
Date: Fri Feb 7 14:24:32 2025 +0000
cgroup: Remove steal time from usage_usec
[ Upstream commit db5fd3cf8bf41b84b577b8ad5234ea95f327c9be ]
The CPU usage time is the time when user, system or both are using the CPU.
Steal time is the time when CPU is waiting to be run by the Hypervisor. It
should not be added to the CPU usage time, hence removing it from the
usage_usec entry.
Fixes: 936f2a70f2077 ("cgroup: add cpu.stat file to root cgroup")
Acked-by: Axel Busch <axel.busch@ibm.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Muhammad Adeel <muhammad.adeel@ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Shyam Prasad N <sprasad@microsoft.com>
Date: Tue Feb 11 10:00:25 2025 +0000
cifs: pick channels for individual subrequests
commit f1bf10d7e909fe898a112f5cae1e97ce34d6484d upstream.
The netfs library could break down a read request into
multiple subrequests. When multichannel is used, there is
potential to improve performance when each of these
subrequests pick a different channel.
Today we call cifs_pick_channel when the main read request
is initialized in cifs_init_request. This change moves this to
cifs_prepare_read, which is the right place to pick channel since
it gets called for each subrequest.
Interestingly cifs_prepare_write already does channel selection
for individual subreq, but looks like it was missed for read.
This is especially important when multichannel is used with
increased rasize.
In my test setup, with rasize set to 8MB, a sequential read
of large file was taking 11.5s without this change. With the
change, it completed in 9s. The difference is even more signigicant
with bigger rasize.
Cc: <stable@vger.kernel.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Waiman Long <longman@redhat.com>
Date: Fri Jan 31 12:33:23 2025 -0500
clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context
[ Upstream commit 6bb05a33337b2c842373857b63de5c9bf1ae2a09 ]
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency.
Fixes: 7560c02bdffb ("clocksource: Check per-CPU clock synchronization when marked unstable")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/all/20250131173323.891943-2-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Waiman Long <longman@redhat.com>
Date: Fri Jan 24 20:54:41 2025 -0500
clocksource: Use pr_info() for "Checking clocksource synchronization" message
[ Upstream commit 1f566840a82982141f94086061927a90e79440e5 ]
The "Checking clocksource synchronization" message is normally printed
when clocksource_verify_percpu() is called for a given clocksource if
both the CLOCK_SOURCE_UNSTABLE and CLOCK_SOURCE_VERIFY_PERCPU flags
are set.
It is an informational message and so pr_info() is the correct choice.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250125015442.3740588-1-longman@redhat.com
Stable-dep-of: 6bb05a33337b ("clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Date: Wed Oct 23 10:21:12 2024 +0000
cpufreq/amd-pstate: Align offline flow of shared memory and MSR based systems
[ Upstream commit a6960e6b1b0e2cb268f427a99040c408a8d10665 ]
Set min_perf to lowest_perf for shared memory systems, similar to the MSR
based systems.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241023102108.5980-5-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Date: Wed Oct 23 10:21:10 2024 +0000
cpufreq/amd-pstate: Call cppc_set_epp_perf in the reenable function
[ Upstream commit 796ff50e127af8362035f87ba29b6b84e2dd9742 ]
The EPP value being set in perf_ctrls.energy_perf is not being propagated
to the shared memory, fix that.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241023102108.5980-4-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Mon Dec 9 12:52:37 2024 -0600
cpufreq/amd-pstate: convert mutex use to guard()
[ Upstream commit 6c093d5a5b73ec1caf1e706510ae6031af2f9d43 ]
Using scoped guard declaration will unlock mutexes automatically.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241209185248.16301-5-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Date: Wed Feb 5 11:25:20 2025 +0000
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
[ Upstream commit 3ace20038e19f23fe73259513f1f08d4bf1a3c83 ]
amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't
decrement the refcount in one of the exit paths, fix that.
Fixes: 45722e777fd9 ("cpufreq: amd-pstate: Optimize amd_pstate_update_limits()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-10-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Date: Wed Dec 4 14:48:42 2024 +0000
cpufreq/amd-pstate: Merge amd_pstate_epp_cpu_offline() and amd_pstate_epp_offline()
[ Upstream commit 53ec2101dfede8fecdd240662281a12e537c3411 ]
amd_pstate_epp_offline() is only called from within
amd_pstate_epp_cpu_offline() and doesn't make much sense to have it at all.
Hence, remove it.
Also remove the unncessary debug print in the offline path while at it.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20241204144842.164178-6-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Date: Wed Dec 4 14:48:40 2024 +0000
cpufreq/amd-pstate: Refactor amd_pstate_epp_reenable() and amd_pstate_epp_offline()
[ Upstream commit b1089e0c8817fda93d474eaa82ad86386887aefe ]
Replace similar code chunks with amd_pstate_update_perf() and
amd_pstate_set_epp() function calls.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241204144842.164178-4-Dhananjay.Ugwekar@amd.com
[ML: Fix LKP reported error about unused variable]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Date: Wed Dec 4 14:48:41 2024 +0000
cpufreq/amd-pstate: Remove the cppc_state check in offline/online functions
[ Upstream commit b78f8c87ec3e7499bb049986838636d3afbc7ece ]
Only amd_pstate_epp driver (i.e. cppc_state = ACTIVE) enters the
amd_pstate_epp_offline() and amd_pstate_epp_cpu_online() functions,
so remove the unnecessary if condition checking if cppc_state is
equal to AMD_PSTATE_ACTIVE.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20241204144842.164178-5-Dhananjay.Ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Date: Wed Feb 5 11:25:12 2025 +0000
cpufreq/amd-pstate: Remove the goto label in amd_pstate_update_limits
commit d364eee14c682b141f4667efc3c65191339d88bd upstream.
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b73 ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Reyders Morales <reyders1@gmail.com>
Date: Mon Feb 3 23:47:20 2025 +0100
Documentation/networking: fix basic node example document ISO 15765-2
[ Upstream commit d0b197b6505fe3788860fc2a81b3ce53cbecc69c ]
In the current struct sockaddr_can tp is member of can_addr. tp is not
member of struct sockaddr_can.
Signed-off-by: Reyders Morales <reyders1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250203224720.42530-1-reyders1@gmail.com
Fixes: 67711e04254c ("Documentation: networking: document ISO 15765-2")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiang Liu <gerry@linux.alibaba.com>
Date: Fri Feb 7 14:44:14 2025 +0800
drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
commit 1abb2648698bf10783d2236a6b4a7ca5e8021699 upstream.
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jiang Liu <gerry@linux.alibaba.com>
Date: Fri Feb 7 14:28:51 2025 +0800
drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()
[ Upstream commit a0a455b4bc7483ad60e8b8a50330c1e05bb7bfcf ]
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b102e ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Karas <krzysztof.karas@intel.com>
Date: Thu Jan 30 09:19:31 2025 +0000
drm/i915/selftests: avoid using uninitialized context
[ Upstream commit 53139b3f9998ea07289e7b70b909fea2264a0de9 ]
There is an error path in igt_ppgtt_alloc(), which leads
to ww object being passed down to i915_gem_ww_ctx_fini() without
initialization. Correct that by only putting ppgtt->vm and
returning early.
Fixes: 480ae79537b2 ("drm/i915/selftests: Prepare gtt tests for obj->mm.lock removal")
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Mikolaj Wasiak <mikolaj.wasiak@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/iuaonpjc3rywmvhna6umjlvzilocn2uqsrxfxfob24e2taocbi@lkaivvfp4777
(cherry picked from commit 8d8334632ea62424233ac6529712868241d0f8df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Mon Dec 9 12:04:24 2024 +0200
drm/msm/dpu1: don't choke on disabling the writeback connector
commit d9f55e2abfb933818c772eba659a9b7ab28a44d0 upstream.
During suspend/resume process all connectors are explicitly disabled and
then reenabled. However resume fails because of the connector_status check:
[dpu error]connector not connected 3
[drm:drm_mode_config_helper_resume [drm_kms_helper]] *ERROR* Failed to resume (-22)
It doesn't make sense to check for the Writeback connected status (and
other drivers don't perform such check), so drop the check.
It wasn't a problem before the commit 71174f362d67 ("drm/msm/dpu: move
writeback's atomic_check to dpu_writeback.c"), since encoder's
atomic_check() is called under a different conditions that the
connector's atomic_check() (e.g. it is not called if there is no
connected CRTC or if the corresponding connector is not a part of the
new state).
Fixes: 71174f362d67 ("drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c")
Cc: stable@vger.kernel.org
Reported-by: Leonard Lausen <leonard@lausen.nl>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/57
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Tested-by: György Kurucz <me@kuruczgy.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/627828/
Link: https://lore.kernel.org/r/20241209-dpu-fix-wb-v4-1-7fe93059f9e0@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stephan Gerhold <stephan.gerhold@linaro.org>
Date: Fri Nov 15 13:55:13 2024 +0100
drm/msm/dpu: fix x1e80100 intf_6 underrun/vsync interrupt
commit ce55101e6ba188296dbdb9506665d26f23110292 upstream.
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
This causes timeout errors when using the DP2 controller, e.g.
[dpu error]enc37 frame done timeout
*ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
*ERROR* wait disable failed: id:37 intf:6 ret:-110
Correct them to fix these errors and make DP2 work properly.
Cc: stable@vger.kernel.org
Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624681/
Link: https://lore.kernel.org/r/20241115-x1e80100-dp2-fix-v1-1-727b9fe6f390@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Fri Nov 15 17:50:08 2024 +0300
drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()
commit 3a47f4b439beb98e955d501c609dfd12b7836d61 upstream.
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Date: Tue Dec 17 07:31:35 2024 +0200
drm/rcar-du: dsi: Fix PHY lock bit check
commit 6389e616fae8a101ce00068f7690461ab57b29d8 upstream.
The driver checks for bit 16 (using CLOCKSET1_LOCK define) in CLOCKSET1
register when waiting for the PPI clock. However, the right bit to check
is bit 17 (CLOCKSET1_LOCK_PHY define). Not only that, but there's
nothing in the documents for bit 16 for V3U nor V4H.
So, fix the check to use bit 17, and drop the define for bit 16.
Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver")
Fixes: 11696c5e8924 ("drm: Place Renesas drivers in a separate dir")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-1-e77421093c05@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Maxime Ripard <mripard@kernel.org>
Date: Wed Jan 29 15:21:53 2025 +0100
drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failures
[ Upstream commit fb97bc2e47f694f79d6358d981ae0428db8e8088 ]
The light_up_connector helper function in the HDMI infrastructure unit
tests uses drm_atomic_set_crtc_for_connector(), but fails when it
returns an error.
This function can return EDEADLK though if the sequence needs to be
restarted, and WW_MUTEX_SLOWPATH is meant to test that we handle it
properly.
Let's handle EDEADLK and restart the sequence in our tests as well.
Fixes: eb66d34d793e ("drm/tests: Add output bpc tests")
Reported-by: Dave Airlie <airlied@gmail.com>
Closes: https://lore.kernel.org/r/CAPM=9tzJ4-ERDxvuwrCyUPY0=+P44orhp1kLWVGL7MCfpQjMEQ@mail.gmail.com/
Link: https://lore.kernel.org/r/20241031091558.2435850-1-mripard@kernel.org
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250129-test-kunit-v2-1-fe59c43805d5@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Devarsh Thakkar <devarsht@ti.com>
Date: Mon Oct 21 17:07:49 2024 +0300
drm/tidss: Clear the interrupt status for interrupts being disabled
commit 361a2ebb5cad211732ec3c5d962de49b21895590 upstream.
The driver does not touch the irqstatus register when it is disabling
interrupts. This might cause an interrupt to trigger for an interrupt
that was just disabled.
To fix the issue, clear the irqstatus registers right after disabling
the interrupts.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Reported-by: Jonathan Cormier <jcormier@criticallink.com>
Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1394222/am625-issue-about-tidss-rcu_preempt-self-detected-stall-on-cpu/5424479#5424479
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
[Tomi: mostly rewrote the patch]
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-5-82ddaec94e4a@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Mon Oct 21 17:07:45 2024 +0300
drm/tidss: Fix issue in irq handling causing irq-flood issue
commit 44b6730ab53ef04944fbaf6da0e77397531517b7 upstream.
It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.
It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.
Co-developed-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Co-developed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Devarsh Thakkar <devarsht@ti.com>
Date: Mon Oct 21 17:07:50 2024 +0300
drm/tidss: Fix race condition while handling interrupt registers
commit a9a73f2661e6f625d306c9b0ef082e4593f45a21 upstream.
The driver has a spinlock for protecting the irq_masks field and irq
enable registers. However, the driver misses protecting the irq status
registers which can lead to races.
Take the spinlock when accessing irqstatus too.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
[Tomi: updated the desc]
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-6-82ddaec94e4a@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Christian Gmeiner <cgmeiner@igalia.com>
Date: Mon Nov 18 23:19:47 2024 +0100
drm/v3d: Stop active perfmon if it is being destroyed
commit 21f1435b1e6b012a07c42f36b206d2b66fc8f13b upstream.
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed").
Cc: stable@vger.kernel.org # v5.15+
Fixes: 26a4dc29b74a ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118221948.1758130-1-christian.gmeiner@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tejas Upadhyay <tejas.upadhyay@intel.com>
Date: Wed Feb 5 10:40:42 2025 +0530
drm/xe/client: bo->client does not need bos_lock
[ Upstream commit fc876c9524e2a9f816f51d533ed31df789cff65a ]
bos_lock is to protect list of bos used by client, it is
not required to protect bo->client so bring it outside of
bos_lock.
Fixes: b27970f3e11c ("drm/xe: Add tracking support for bos per client")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250205051042.1991192-1-tejas.upadhyay@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit f74fd53ba34551b7626193fb70c17226f06e9bf1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Date: Mon Dec 23 14:42:50 2024 +0100
drm/xe/tracing: Fix a potential TP_printk UAF
commit 07089083a526ea19daa72a1edf9d6e209615b77c upstream.
The commit
afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format")
exposes potential UAFs in the xe_bo_move trace event.
Fix those by avoiding dereferencing the
xe_mem_type_to_name[] array at TP_printk time.
Since some code refactoring has taken place, explicit backporting may
be needed for kernels older than 6.10.
Fixes: e46d3f813abd ("drm/xe/trace: Extract bo, vm, vma traces")
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241223134250.14345-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Feb 12 18:18:51 2025 +0200
drm: Fix DSC BPP increment decoding
[ Upstream commit e00a2e5d485faf53c7a24b9d1b575a642227947f ]
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c96521 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chris Brandt <chris.brandt@renesas.com>
Date: Wed Nov 20 10:03:28 2024 -0500
drm: renesas: rz-du: Increase supported resolutions
commit 226570680bbde0a698f2985db20d9faf4f23cc6e upstream.
The supported resolutions were misrepresented in earlier versions of
hardware manuals.
Fixes: 768e9e61b3b9 ("drm: renesas: Add RZ/G2L DU Support")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Tested-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241120150328.4131525-1-chris.brandt@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ard Biesheuvel <ardb@kernel.org>
Date: Sat Feb 1 18:21:35 2025 +0100
efi: Avoid cold plugged memory for placing the kernel
commit ba69e0750b0362870294adab09339a0c39c3beaf upstream.
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Thu Jan 2 20:19:51 2025 +0200
fbdev: omap: use threaded IRQ for LCD DMA
[ Upstream commit e4b6b665df815b4841e71b72f06446884e8aad40 ]
When using touchscreen and framebuffer, Nokia 770 crashes easily with:
BUG: scheduling while atomic: irq/144-ads7846/82/0x00010000
Modules linked in: usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap_udc ohci_omap ohci_hcd
CPU: 0 UID: 0 PID: 82 Comm: irq/144-ads7846 Not tainted 6.12.7-770 #2
Hardware name: Nokia 770
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x54/0x5c
dump_stack_lvl from __schedule_bug+0x50/0x70
__schedule_bug from __schedule+0x4d4/0x5bc
__schedule from schedule+0x34/0xa0
schedule from schedule_preempt_disabled+0xc/0x10
schedule_preempt_disabled from __mutex_lock.constprop.0+0x218/0x3b4
__mutex_lock.constprop.0 from clk_prepare_lock+0x38/0xe4
clk_prepare_lock from clk_set_rate+0x18/0x154
clk_set_rate from sossi_read_data+0x4c/0x168
sossi_read_data from hwa742_read_reg+0x5c/0x8c
hwa742_read_reg from send_frame_handler+0xfc/0x300
send_frame_handler from process_pending_requests+0x74/0xd0
process_pending_requests from lcd_dma_irq_handler+0x50/0x74
lcd_dma_irq_handler from __handle_irq_event_percpu+0x44/0x130
__handle_irq_event_percpu from handle_irq_event+0x28/0x68
handle_irq_event from handle_level_irq+0x9c/0x170
handle_level_irq from generic_handle_domain_irq+0x2c/0x3c
generic_handle_domain_irq from omap1_handle_irq+0x40/0x8c
omap1_handle_irq from generic_handle_arch_irq+0x28/0x3c
generic_handle_arch_irq from call_with_stack+0x1c/0x24
call_with_stack from __irq_svc+0x94/0xa8
Exception stack(0xc5255da0 to 0xc5255de8)
5da0: 00000001 c22fc620 00000000 00000000 c08384a8 c106fc00 00000000 c240c248
5dc0: c113a600 c3f6ec30 00000001 00000000 c22fc620 c5255df0 c22fc620 c0279a94
5de0: 60000013 ffffffff
__irq_svc from clk_prepare_lock+0x4c/0xe4
clk_prepare_lock from clk_get_rate+0x10/0x74
clk_get_rate from uwire_setup_transfer+0x40/0x180
uwire_setup_transfer from spi_bitbang_transfer_one+0x2c/0x9c
spi_bitbang_transfer_one from spi_transfer_one_message+0x2d0/0x664
spi_transfer_one_message from __spi_pump_transfer_message+0x29c/0x498
__spi_pump_transfer_message from __spi_sync+0x1f8/0x2e8
__spi_sync from spi_sync+0x24/0x40
spi_sync from ads7846_halfd_read_state+0x5c/0x1c0
ads7846_halfd_read_state from ads7846_irq+0x58/0x348
ads7846_irq from irq_thread_fn+0x1c/0x78
irq_thread_fn from irq_thread+0x120/0x228
irq_thread from kthread+0xc8/0xe8
kthread from ret_from_fork+0x14/0x28
As a quick fix, switch to a threaded IRQ which provides a stable system.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Date: Mon Dec 9 15:27:58 2024 +0100
firmware: qcom: scm: smc: Handle missing SCM device
[ Upstream commit 94f48ecf0a538019ca2025e0b0da391f8e7cc58c ]
Commit ca61d6836e6f ("firmware: qcom: scm: fix a NULL-pointer
dereference") makes it explicit that qcom_scm_get_tzmem_pool() can
return NULL, therefore its users should handle this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241209-qcom-scm-missing-barriers-and-all-sort-of-srap-v2-5-9061013c8d92@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:17 2025 +0000
flow_dissector: use RCU protection to fetch dev_net()
[ Upstream commit afec62cd0a4191cde6dd3a75382be4d51a38ce9b ]
__skb_flow_dissect() can be called from arbitrary contexts.
It must extend its RCU protection section to include
the call to dev_net(), which can become dev_net_rcu().
This makes sure the net structure can not disappear under us.
Fixes: 9b52e3f267a6 ("flow_dissector: handle no-skb use case")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Date: Mon Dec 30 10:34:08 2024 +0300
fs/ntfs3: Unify inode corruption marking with _ntfs_bad_inode()
[ Upstream commit 55ad333de0f80bc0caee10c6c27196cdcf8891bb ]
Also reworked error handling in a couple of places.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Artur Weber <aweber.kernel@gmail.com>
Date: Thu Feb 6 18:46:02 2025 +0100
gpio: bcm-kona: Add missing newline to dev_err format string
[ Upstream commit 615279db222c3ac56d5c93716efd72b843295c1f ]
Add a missing newline to the format string of the "Couldn't get IRQ
for bank..." error message.
Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-3-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Artur Weber <aweber.kernel@gmail.com>
Date: Thu Feb 6 18:46:00 2025 +0100
gpio: bcm-kona: Fix GPIO lock/unlock for banks above bank 0
[ Upstream commit de1d0d160f64ee76df1d364d521b2faf465a091c ]
The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).
Fix lock/unlock for these banks by using the correct bit.
Fixes: bdb93c03c550 ("gpio: bcm281xx: Centralize register locking")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Artur Weber <aweber.kernel@gmail.com>
Date: Thu Feb 6 18:46:01 2025 +0100
gpio: bcm-kona: Make sure GPIO bits are unlocked when requesting IRQ
[ Upstream commit 57f5db77a915cc29461a679a6bcae7097967be1a ]
The settings for all GPIOs are locked by default in bcm_kona_gpio_reset.
The settings for a GPIO are unlocked when requesting it as a GPIO, but
not when requesting it as an interrupt, causing the IRQ settings to not
get applied.
Fix this by making sure to unlock the right bits when an IRQ is requested.
To avoid a situation where an IRQ being released causes a lock despite
the same GPIO being used by a GPIO request or vice versa, add an unlock
counter and only lock if it reaches 0.
Fixes: 757651e3d60e ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-2-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Wed Feb 12 10:18:49 2025 +0800
gpio: stmpe: Check return value of stmpe_reg_read in stmpe_gpio_irq_sync_unlock
commit b9644fbfbcab13da7f8b37bef7c51e5b8407d031 upstream.
The stmpe_reg_read function can fail, but its return value is not checked
in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and
incorrect behavior if the hardware access fails.
This patch adds checks for the return value of stmpe_reg_read. If the
function fails, an error message is logged and the function returns
early to avoid further issues.
Fixes: b888fb6f2a27 ("gpio: stmpe: i2c transfer are forbiden in atomic context")
Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mario Limonciello <mario.limonciello@amd.com>
Date: Tue Feb 11 14:32:01 2025 -0600
gpiolib: acpi: Add a quirk for Acer Nitro ANV14
commit 8743d66979e494c5378563e6b5a32e913380abd8 upstream.
Spurious immediate wake up events are reported on Acer Nitro ANV14. GPIO 11 is
specified as an edge triggered input and also a wake source but this pin is
supposed to be an output pin for an LED, so it's effectively floating.
Block the interrupt from getting set up for this GPIO on this device.
Cc: stable@vger.kernel.org
Reported-by: Delgan <delgan.py@gmail.com>
Tested-by: Delgan <delgan.py@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3954
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250211203222.761206-1-superm1@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Thu Feb 13 17:56:46 2025 +0200
gpiolib: Fix crash on error in gpiochip_get_ngpios()
[ Upstream commit 7b4aebeecbbd5b5fe73e35fad3f62ed21aa7ef44 ]
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Rupinderjit Singh <rusingh@redhat.com>
Date: Thu Feb 6 15:58:03 2025 +0000
gpu: host1x: Fix a use of uninitialized mutex
[ Upstream commit 02458fbfaa0170aabf8506f7d4ed054f02414251 ]
commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
caused a use of uninitialized mutex leading to below warning when
CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled.
[ 41.662843] ------------[ cut here ]------------
[ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878
[ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod
[ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1
[ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024
[ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 41.679636] pc : __mutex_lock+0x670/0x878
[ 41.683834] lr : __mutex_lock+0x670/0x878
[ 41.688035] sp : ffff800084b77090
[ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000
[ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000
[ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0
[ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000
[ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720
[ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3
[ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc
[ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001
[ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000
[ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000
[ 41.764251] Call trace:
[ 41.766695] __mutex_lock+0x670/0x878
[ 41.770373] mutex_lock_nested+0x2c/0x40
[ 41.774134] host1x_intr_start+0x54/0xf8 [host1x]
[ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x]
[ 41.783935] pm_generic_runtime_resume+0x84/0xc8
[ 41.788485] __rpm_callback+0xa0/0x478
[ 41.792422] rpm_callback+0x15c/0x1a8
[ 41.795922] rpm_resume+0x698/0xc08
[ 41.799597] __pm_runtime_resume+0xa8/0x140
[ 41.803621] host1x_probe+0x810/0xbc0 [host1x]
[ 41.807909] platform_probe+0xcc/0x1a8
[ 41.811845] really_probe+0x188/0x800
[ 41.815347] __driver_probe_device+0x164/0x360
[ 41.819810] driver_probe_device+0x64/0x1a8
[ 41.823834] __driver_attach+0x180/0x490
[ 41.827773] bus_for_each_dev+0x104/0x1a0
[ 41.831797] driver_attach+0x44/0x68
[ 41.835296] bus_add_driver+0x23c/0x4e8
[ 41.839235] driver_register+0x15c/0x3a8
[ 41.843170] __platform_register_drivers+0xa4/0x208
[ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x]
[ 41.853147] do_one_initcall+0xd4/0x380
[ 41.856997] do_init_module+0x1dc/0x698
[ 41.860758] load_module+0xc70/0x1300
[ 41.864435] __do_sys_init_module+0x1a8/0x1d0
[ 41.868721] __arm64_sys_init_module+0x74/0xb0
[ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8
[ 41.877997] do_el0_svc+0x154/0x1d0
[ 41.881671] el0_svc+0x54/0x140
[ 41.884820] el0t_64_sync_handler+0x120/0x130
[ 41.889285] el0t_64_sync+0x1a4/0x1a8
[ 41.892960] irq event stamp: 69737
[ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8
[ 41.905739] hardirqs last disabled at (69736): [<ffffdd4be59dcd40>] clk_enable_lock+0x98/0x198
[ 41.914314] softirqs last enabled at (68082): [<ffffdd4be466b1d0>] handle_softirqs+0x4c8/0x890
[ 41.922977] softirqs last disabled at (67945): [<ffffdd4be44f02a4>] __do_softirq+0x1c/0x28
[ 41.931289] ---[ end trace 0000000000000000 ]---
Inside the probe function when pm_runtime_enable() is called,
the PM core invokes a resume callback if the device Host1x is
in a suspended state. As it can be seen in the logs above,
this leads to host1x_intr_start() function call which is
trying to acquire a mutex lock. But, the function
host_intr_init() only gets called after the pm_runtime_enable()
where mutex is initialised leading to the use of mutex
prior to its initialisation.
Fix this by moving the mutex initialisation prior to the runtime
PM enablement function pm_runtime_enable() in probe.
Fixes: c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra")
Signed-off-by: Rupinderjit Singh <rusingh@redhat.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.ozlabs.org/project/linux-tegra/patch/20250206155803.201942-1-rusingh@redhat.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Maksym Planeta <maksym@exostellar.io>
Date: Wed Dec 4 11:35:15 2024 +0100
Grab mm lock before grabbing pt lock
[ Upstream commit 6d002348789bc16e9203e9818b7a3688787e3b29 ]
Function xen_pin_page calls xen_pte_lock, which in turn grab page
table lock (ptlock). When locking, xen_pte_lock expect mm->page_table_lock
to be held before grabbing ptlock, but this does not happen when pinning
is caused by xen_mm_pin_all.
This commit addresses lockdep warning below, which shows up when
suspending a Xen VM.
[ 3680.658422] Freezing user space processes
[ 3680.660156] Freezing user space processes completed (elapsed 0.001 seconds)
[ 3680.660182] OOM killer disabled.
[ 3680.660192] Freezing remaining freezable tasks
[ 3680.661485] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 3680.685254]
[ 3680.685265] ==================================
[ 3680.685269] WARNING: Nested lock was not taken
[ 3680.685274] 6.12.0+ #16 Tainted: G W
[ 3680.685279] ----------------------------------
[ 3680.685283] migration/0/19 is trying to lock:
[ 3680.685288] ffff88800bac33c0 (ptlock_ptr(ptdesc)#2){+.+.}-{3:3}, at: xen_pin_page+0x175/0x1d0
[ 3680.685303]
[ 3680.685303] but this task is not holding:
[ 3680.685308] init_mm.page_table_lock
[ 3680.685311]
[ 3680.685311] stack backtrace:
[ 3680.685316] CPU: 0 UID: 0 PID: 19 Comm: migration/0 Tainted: G W 6.12.0+ #16
[ 3680.685324] Tainted: [W]=WARN
[ 3680.685328] Stopper: multi_cpu_stop+0x0/0x120 <- __stop_cpus.constprop.0+0x8c/0xd0
[ 3680.685339] Call Trace:
[ 3680.685344] <TASK>
[ 3680.685347] dump_stack_lvl+0x77/0xb0
[ 3680.685356] __lock_acquire+0x917/0x2310
[ 3680.685364] lock_acquire+0xce/0x2c0
[ 3680.685369] ? xen_pin_page+0x175/0x1d0
[ 3680.685373] _raw_spin_lock_nest_lock+0x2f/0x70
[ 3680.685381] ? xen_pin_page+0x175/0x1d0
[ 3680.685386] xen_pin_page+0x175/0x1d0
[ 3680.685390] ? __pfx_xen_pin_page+0x10/0x10
[ 3680.685394] __xen_pgd_walk+0x233/0x2c0
[ 3680.685401] ? stop_one_cpu+0x91/0x100
[ 3680.685405] __xen_pgd_pin+0x5d/0x250
[ 3680.685410] xen_mm_pin_all+0x70/0xa0
[ 3680.685415] xen_pv_pre_suspend+0xf/0x280
[ 3680.685420] xen_suspend+0x57/0x1a0
[ 3680.685428] multi_cpu_stop+0x6b/0x120
[ 3680.685432] ? update_cpumasks_hier+0x7c/0xa60
[ 3680.685439] ? __pfx_multi_cpu_stop+0x10/0x10
[ 3680.685443] cpu_stopper_thread+0x8c/0x140
[ 3680.685448] ? smpboot_thread_fn+0x20/0x1f0
[ 3680.685454] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 3680.685458] smpboot_thread_fn+0xed/0x1f0
[ 3680.685462] kthread+0xde/0x110
[ 3680.685467] ? __pfx_kthread+0x10/0x10
[ 3680.685471] ret_from_fork+0x2f/0x50
[ 3680.685478] ? __pfx_kthread+0x10/0x10
[ 3680.685482] ret_from_fork_asm+0x1a/0x30
[ 3680.685489] </TASK>
[ 3680.685491]
[ 3680.685491] other info that might help us debug this:
[ 3680.685497] 1 lock held by migration/0/19:
[ 3680.685500] #0: ffffffff8284df38 (pgd_lock){+.+.}-{3:3}, at: xen_mm_pin_all+0x14/0xa0
[ 3680.685512]
[ 3680.685512] stack backtrace:
[ 3680.685518] CPU: 0 UID: 0 PID: 19 Comm: migration/0 Tainted: G W 6.12.0+ #16
[ 3680.685528] Tainted: [W]=WARN
[ 3680.685531] Stopper: multi_cpu_stop+0x0/0x120 <- __stop_cpus.constprop.0+0x8c/0xd0
[ 3680.685538] Call Trace:
[ 3680.685541] <TASK>
[ 3680.685544] dump_stack_lvl+0x77/0xb0
[ 3680.685549] __lock_acquire+0x93c/0x2310
[ 3680.685554] lock_acquire+0xce/0x2c0
[ 3680.685558] ? xen_pin_page+0x175/0x1d0
[ 3680.685562] _raw_spin_lock_nest_lock+0x2f/0x70
[ 3680.685568] ? xen_pin_page+0x175/0x1d0
[ 3680.685572] xen_pin_page+0x175/0x1d0
[ 3680.685578] ? __pfx_xen_pin_page+0x10/0x10
[ 3680.685582] __xen_pgd_walk+0x233/0x2c0
[ 3680.685588] ? stop_one_cpu+0x91/0x100
[ 3680.685592] __xen_pgd_pin+0x5d/0x250
[ 3680.685596] xen_mm_pin_all+0x70/0xa0
[ 3680.685600] xen_pv_pre_suspend+0xf/0x280
[ 3680.685607] xen_suspend+0x57/0x1a0
[ 3680.685611] multi_cpu_stop+0x6b/0x120
[ 3680.685615] ? update_cpumasks_hier+0x7c/0xa60
[ 3680.685620] ? __pfx_multi_cpu_stop+0x10/0x10
[ 3680.685625] cpu_stopper_thread+0x8c/0x140
[ 3680.685629] ? smpboot_thread_fn+0x20/0x1f0
[ 3680.685634] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 3680.685638] smpboot_thread_fn+0xed/0x1f0
[ 3680.685642] kthread+0xde/0x110
[ 3680.685645] ? __pfx_kthread+0x10/0x10
[ 3680.685649] ret_from_fork+0x2f/0x50
[ 3680.685654] ? __pfx_kthread+0x10/0x10
[ 3680.685657] ret_from_fork_asm+0x1a/0x30
[ 3680.685662] </TASK>
[ 3680.685267] xen:grant_table: Grant tables using version 1 layout
[ 3680.685921] OOM killer enabled.
[ 3680.685934] Restarting tasks ... done.
Signed-off-by: Maksym Planeta <maksym@exostellar.io>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241204103516.3309112-1-maksym@exostellar.io>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vicki Pfau <vi@endrift.com>
Date: Tue Feb 4 19:55:29 2025 -0800
HID: hid-steam: Don't use cancel_delayed_work_sync in IRQ context
[ Upstream commit b051ffa2aeb2a60e092387b6fb2af1ad42f51a3c ]
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd05 ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vicki Pfau <vi@endrift.com>
Date: Wed Dec 25 18:34:24 2024 -0800
HID: hid-steam: Make sure rumble work is canceled on removal
[ Upstream commit cc4f952427aaa44ecfd92542e10a65cce67bd6f4 ]
When a force feedback command is sent from userspace, work is scheduled to pass
this data to the controller without blocking userspace itself. However, in
theory, this work might not be properly canceled if the controller is removed
at the exact right time. This patch ensures the work is properly canceled when
the device is removed.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7e2 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vicki Pfau <vi@endrift.com>
Date: Tue Feb 4 19:55:27 2025 -0800
HID: hid-steam: Move hidraw input (un)registering to work
[ Upstream commit 79504249d7e27cad4a3eeb9afc6386e418728ce0 ]
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tulio Fernandes <tuliomf09@gmail.com>
Date: Wed Feb 5 18:50:34 2025 -0300
HID: hid-thrustmaster: fix stack-out-of-bounds read in usb_check_int_endpoints()
[ Upstream commit 0b43d98ff29be3144e86294486b1373b5df74c0e ]
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79c3 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Han <hanchunchao@inspur.com>
Date: Fri Nov 15 14:26:21 2024 +0800
HID: multitouch: Add NULL check in mt_input_configured
[ Upstream commit 9b8e2220d3a052a690b1d1b23019673e612494c5 ]
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 479439463529 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Charles Han <hanchunchao@inspur.com>
Date: Thu Nov 14 17:19:47 2024 +0800
HID: winwing: Add NULL check in winwing_init_led()
[ Upstream commit 45ab5166a82d038c898985b0ad43ead69c1f9573 ]
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in winwing_init_led() is not checked.
Add NULL check in winwing_init_led(), to handle kernel NULL
pointer dereference error.
Fixes: 266c990debad ("HID: Add WinWing Orion2 throttle support")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Date: Tue Dec 31 13:59:03 2024 +0200
i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming
[ Upstream commit ccdb2e0e3b00d13df90ac7a0524dd855173f1171 ]
MIPI I3C HCI on Intel hardware requires a quirk where ring needs to stop
and set to run again after resuming the halted controller. This is not
expected from the MIPI I3C HCI specification and is Intel specific.
Add this quirk to generic aborted transfer handling and execute it only
when ring is not in running state after a transfer error and attempted
controller resume. This is the case on Intel hardware.
It is not fully clear to me what is the ring running state in generic
hardware in such case. I would expect if ring is not running, then stop
request is a no-op and run request is either required or does the same
what controller resume would do.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241231115904.620052-1-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Date: Tue Dec 31 13:59:04 2024 +0200
i3c: mipi-i3c-hci: Add support for MIPI I3C HCI on PCI bus
[ Upstream commit 30bb1ce71215645fa6a92f4fa8cbb8f58db68f12 ]
Add a glue code for the MIPI I3C HCI on PCI bus with Intel Panther Lake
I3C controller PCI IDs.
MIPI I3C HCI on Intel platforms has additional logic around the MIPI I3C
HCI core logic. Those together create so called I3C slice on PCI bus.
Intel specific initialization code does a reset cycle to the I3C slice
before probing the MIPI I3C HCI part.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20241231115904.620052-2-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Joshua Hay <joshua.a.hay@intel.com>
Date: Tue Feb 4 18:08:11 2025 -0800
idpf: call set_real_num_queues in idpf_open
[ Upstream commit 52c11d31b5a1d1c747bb5f36cc4808e93e2348f4 ]
On initial driver load, alloc_etherdev_mqs is called with whatever max
queue values are provided by the control plane. However, if the driver
is loaded on a system where num_online_cpus() returns less than the max
queues, the netdev will think there are more queues than are actually
available. Only num_online_cpus() will be allocated, but
skb_get_queue_mapping(skb) could possibly return an index beyond the
range of allocated queues. Consequently, the packet is silently dropped
and it appears as if TX is broken.
Set the real number of queues during open so the netdev knows how many
queues will be allocated.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sridhar Samudrala <sridhar.samudrala@intel.com>
Date: Fri Jan 10 16:29:22 2025 -0800
idpf: fix handling rsc packet with a single segment
[ Upstream commit 69ab25a74e2df53edc2de4acfce0a484bdb88155 ]
Handle rsc packet with a single segment same as a multi
segment rsc packet so that CHECKSUM_PARTIAL is set in the
skb->ip_summed field. The current code is passing CHECKSUM_NONE
resulting in TCP GRO layer doing checksum in SW and hiding the
issue. This will fail when using dmabufs as payload buffers as
skb frag would be unreadable.
Fixes: 3a8845af66ed ("idpf: add RX splitq napi poll support")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sridhar Samudrala <sridhar.samudrala@intel.com>
Date: Fri Jan 10 16:29:58 2025 -0800
idpf: record rx queue in skb for RSC packets
[ Upstream commit 2ff66c2f9ea4e9311e9a00004348b6c465bd5d3b ]
Move the call to skb_record_rx_queue in idpf_rx_process_skb_fields()
so that RX queue is recorded for RSC packets too.
Fixes: 90912f9f4f2d ("idpf: convert header split mode to libeth + napi_build_skb()")
Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Zdenek Bouska <zdenek.bouska@siemens.com>
Date: Tue Jan 28 13:26:48 2025 +0100
igc: Fix HW RX timestamp when passed by ZC XDP
[ Upstream commit 7822dd4d6d4bebca5045a395e1784ef09cae2d43 ]
Fixes HW RX timestamp in the following scenario:
- AF_PACKET socket with enabled HW RX timestamps is created
- AF_XDP socket with enabled zero copy is created
- frame is forwarded to the BPF program, where the timestamp should
still be readable (extracted by igc_xdp_rx_timestamp(), kfunc
behind bpf_xdp_metadata_rx_timestamp())
- the frame got XDP_PASS from BPF program, redirecting to the stack
- AF_PACKET socket receives the frame with HW RX timestamp
Moves the skb timestamp setting from igc_dispatch_skb_zc() to
igc_construct_skb_zc() so that igc_construct_skb_zc() is similar to
igc_construct_skb().
This issue can also be reproduced by running:
# tools/testing/selftests/bpf/xdp_hw_metadata enp1s0
When a frame with the wrong port 9092 (instead of 9091) is used:
# echo -n xdp | nc -u -q1 192.168.10.9 9092
then the RX timestamp is missing and xdp_hw_metadata prints:
skb hwtstamp is not found!
With this fix or when copy mode is used:
# tools/testing/selftests/bpf/xdp_hw_metadata -c enp1s0
then RX timestamp is found and xdp_hw_metadata prints:
found skb hwtstamp = 1736509937.852786132
Fixes: 069b142f5819 ("igc: Add support for PTP .getcyclesx64()")
Signed-off-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Song Yoong Siang <yoong.siang.song@intel.com>
Date: Wed Feb 5 10:36:03 2025 +0800
igc: Set buffer type for empty frames in igc_init_empty_frame
commit 63f20f00d23d569e4e67859b4e8dcc9de79221cb upstream.
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the
igc_init_empty_frame function. This ensures that the buffer type is
correctly identified and handled during Tx ring cleanup.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit")
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Tue Dec 3 13:49:42 2024 +0100
include: net: add static inline dst_dev_overhead() to dst.h
[ Upstream commit 0600cf40e9b36fe17f9c9f04d4f9cef249eaa5e7 ]
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Wed Feb 12 13:46:46 2025 +0000
io_uring/kbuf: reallocate buf lists on upgrade
commit 8802766324e1f5d414a81ac43365c20142e85603 upstream.
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead.
Cc: stable@vger.kernel.org
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Fixes: 2fcabce2d7d34 ("io_uring: disallow mixed provided buffer group registrations")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jens Axboe <axboe@kernel.dk>
Date: Wed Feb 12 14:05:11 2025 -0700
io_uring/uring_cmd: remove dead req_has_async_data() check
[ Upstream commit 0edf1283a9d1419a2095b4fcdd95c11ac00a191c ]
Any uring_cmd always has async data allocated now, there's no reason to
check and clear a cached copy of the SQE.
Fixes: d10f19dff56e ("io_uring/uring_cmd: switch to always allocating async data")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Pavel Begunkov <asml.silence@gmail.com>
Date: Wed Feb 12 13:33:24 2025 +0000
io_uring/waitid: don't abuse io_tw_state
[ Upstream commit 06521ac0485effdcc9c792cb0b40ed8e6f2f5fb8 ]
struct io_tw_state is managed by core io_uring, and opcode handling code
must never try to cheat and create their own instances, it's plain
incorrect.
io_waitid_complete() attempts exactly that outside of the task work
context, and even though the ring is locked, there would be no one to
reap the requests from the defer completion list. It only works now
because luckily it's called before io_uring_try_cancel_uring_cmd(),
which flushes completions.
Fixes: f31ecf671ddc4 ("io_uring: add IORING_OP_WAITID support")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vasant Hegde <vasant.hegde@amd.com>
Date: Mon Jan 27 09:44:11 2025 +0000
iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path
[ Upstream commit ef75966abf950c0539534effa4960caa29fb7167 ]
With recent kernel, AMDGPU failed to resume after suspend on certain laptop.
Sample log:
-----------
Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080]
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000
This is because in resume path, CNTRL[EPHEn] is not set. Fix this by
setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set.
Note
May be better approach is to save the control register in suspend path
and restore it in resume path instead of trying to set indivisual
bits. We will have separate patch for that.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499
Fixes: c4cb23111103 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Lu Baolu <baolu.lu@linux.intel.com>
Date: Fri Jan 17 13:58:00 2025 +0800
iommu: Fix potential memory leak in iopf_queue_remove_device()
commit 9759ae2cee7cd42b95f1c48aa3749bd02b5ddb08 upstream.
The iopf_queue_remove_device() helper removes a device from the per-iommu
iopf queue when PRI is disabled on the device. It responds to all
outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the
device from the queue.
However, it fails to release the group structure that represents a group
of iopf's awaiting for a response after responding to the hardware. This
can cause a memory leak if iopf_queue_remove_device() is called with
pending iopf's.
Fix it by calling iopf_free_group() after the iopf group is responded.
Fixes: 199112327135 ("iommu: Track iopf group instead of last fault")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20250117055800.782462-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:10 2025 +0000
ipv4: add RCU protection to ip4_dst_hoplimit()
[ Upstream commit 469308552ca4560176cfc100e7ca84add1bebd7c ]
ip4_dst_hoplimit() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: fa50d974d104 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:16 2025 +0000
ipv4: icmp: convert to dev_net_rcu()
[ Upstream commit 4b8474a0951e605d2a27a2c483da4eb4b8c63760 ]
__icmp_send() must ensure rcu_read_lock() is held, as spotted
by Jakub.
Other ICMP uses of dev_net() seem safe, change them to dev_net_rcu()
to get LOCKDEP support.
Fixes: dde1bc0e6f86 ("[NETNS]: Add namespace for ICMP replying code.")
Closes: https://lore.kernel.org/netdev/20250203153633.46ce0337@kernel.org/
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:15 2025 +0000
ipv4: use RCU protection in __ip_rt_update_pmtu()
[ Upstream commit 139512191bd06f1b496117c76372b2ce372c9a41 ]
__ip_rt_update_pmtu() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: 2fbc6e89b2f1 ("ipv4: Update exception handling for multipath routes via same device")
Fixes: 1de6b15a434c ("Namespaceify min_pmtu sysctl")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:14 2025 +0000
ipv4: use RCU protection in inet_select_addr()
[ Upstream commit 719817cd293e4fa389e1f69c396f3f816ed5aa41 ]
inet_select_addr() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: c4544c724322 ("[NETNS]: Process inet_select_addr inside a namespace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:11 2025 +0000
ipv4: use RCU protection in ip_dst_mtu_maybe_forward()
[ Upstream commit 071d8012869b6af352acca346ade13e7be90a49f ]
ip_dst_mtu_maybe_forward() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: f87c10a8aa1e8 ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:12 2025 +0000
ipv4: use RCU protection in ipv4_default_advmss()
[ Upstream commit 71b8471c93fa0bcab911fcb65da1eb6c4f5f735f ]
ipv4_default_advmss() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: 2e9589ff809e ("ipv4: Namespaceify min_adv_mss sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:13 2025 +0000
ipv4: use RCU protection in rt_is_expired()
[ Upstream commit dd205fcc33d92d54eee4d7f21bb073af9bd5ce2b ]
rt_is_expired() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: e84f84f27647 ("netns: place rt_genid into struct net")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:19 2025 +0000
ipv6: icmp: convert to dev_net_rcu()
[ Upstream commit 34aef2b0ce3aa4eb4ef2e1f5cad3738d527032f5 ]
icmp6_send() must acquire rcu_read_lock() sooner to ensure
the dev_net() call done from a safe context.
Other ICMPv6 uses of dev_net() seem safe, change them to
dev_net_rcu() to get LOCKDEP support to catch bugs.
Fixes: 9a43b709a230 ("[NETNS][IPV6] icmp6 - make icmpv6_socket per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 12 14:10:21 2025 +0000
ipv6: mcast: add RCU protection to mld_newpack()
[ Upstream commit a527750d877fd334de87eef81f1cb5f0f0ca3373 ]
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58f7 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:40 2025 +0000
ipv6: mcast: extend RCU protection in igmp6_send()
[ Upstream commit 087c1faa594fa07a66933d750c0b2610aa1a2946 ]
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58f7 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:18 2025 +0000
ipv6: use RCU protection in ip6_default_advmss()
[ Upstream commit 3c8ffcd248da34fc41e52a46e51505900115fc2a ]
ip6_default_advmss() needs rcu protection to make
sure the net structure it reads does not disappear.
Fixes: 5578689a4e3c ("[NETNS][IPV6] route6 - make route6 per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Tue Dec 10 19:24:41 2024 +0900
kbuild: suppress stdout from merge_config for silent builds
[ Upstream commit 1f937a4bcb0472015818f30f4d3c5546d3f09933 ]
merge_config does not respect the Make's -s (--silent) option.
Let's sink the stdout from merge_config for silent builds.
This commit does not cater to the direct invocation of merge_config.sh
(e.g. arch/mips/Makefile).
Reported-by: Leon Romanovsky <leon@kernel.org>
Closes: https://lore.kernel.org/all/e534ce33b0e1060eb85ece8429810f087b034c88.1733234008.git.leonro@nvidia.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kees Cook <kees@kernel.org>
Date: Mon Jan 27 11:10:28 2025 -0800
kbuild: Use -fzero-init-padding-bits=all
[ Upstream commit dce4aab8441d285b9a78b33753e0bf583c1320ee ]
GCC 15 introduces a regression in "= { 0 }" style initialization of
unions that Linux has depended on for eliminating uninitialized variable
contents. GCC does not seem likely to fix it[1], instead suggesting[2]
that affected projects start using -fzero-init-padding-bits=unions.
To avoid future surprises beyond just the current situation with unions,
enable -fzero-init-padding-bits=all when available (GCC 15+). This will
correctly zero padding bits in unions and structs that might have been
left uninitialized, and will make sure there is no immediate regression
in union initializations. As seen in the stackinit KUnit selftest union
cases, which were passing before, were failing under GCC 15:
not ok 18 test_small_start_old_zero
ok 29 test_small_start_dynamic_partial # SKIP XFAIL uninit bytes: 63
ok 32 test_small_start_assigned_dynamic_partial # SKIP XFAIL uninit bytes: 63
ok 67 test_small_start_static_partial # SKIP XFAIL uninit bytes: 63
ok 70 test_small_start_static_all # SKIP XFAIL uninit bytes: 56
ok 73 test_small_start_dynamic_all # SKIP XFAIL uninit bytes: 56
ok 82 test_small_start_assigned_static_partial # SKIP XFAIL uninit bytes: 63
ok 85 test_small_start_assigned_static_all # SKIP XFAIL uninit bytes: 56
ok 88 test_small_start_assigned_dynamic_all # SKIP XFAIL uninit bytes: 56
The above all now pass again with -fzero-init-padding-bits=all added.
This also fixes the following cases for struct initialization that had
been XFAIL until now because there was no compiler support beyond the
larger "-ftrivial-auto-var-init=zero" option:
ok 38 test_small_hole_static_all # SKIP XFAIL uninit bytes: 3
ok 39 test_big_hole_static_all # SKIP XFAIL uninit bytes: 124
ok 40 test_trailing_hole_static_all # SKIP XFAIL uninit bytes: 7
ok 42 test_small_hole_dynamic_all # SKIP XFAIL uninit bytes: 3
ok 43 test_big_hole_dynamic_all # SKIP XFAIL uninit bytes: 124
ok 44 test_trailing_hole_dynamic_all # SKIP XFAIL uninit bytes: 7
ok 58 test_small_hole_assigned_static_all # SKIP XFAIL uninit bytes: 3
ok 59 test_big_hole_assigned_static_all # SKIP XFAIL uninit bytes: 124
ok 60 test_trailing_hole_assigned_static_all # SKIP XFAIL uninit bytes: 7
ok 62 test_small_hole_assigned_dynamic_all # SKIP XFAIL uninit bytes: 3
ok 63 test_big_hole_assigned_dynamic_all # SKIP XFAIL uninit bytes: 124
ok 64 test_trailing_hole_assigned_dynamic_all # SKIP XFAIL uninit bytes: 7
All of the above now pass when built under GCC 15. Tests can be seen
with:
./tools/testing/kunit/kunit.py run stackinit --arch=x86_64 \
--make_option CC=gcc-15
Clang continues to fully initialize these kinds of variables[3] without
additional flags.
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=118403 [1]
Link: https://lore.kernel.org/linux-toolchains/Z0hRrrNU3Q+ro2T7@tucnak/ [2]
Link: https://github.com/llvm/llvm-project/commit/7a086e1b2dc05f54afae3591614feede727601fa [3]
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20250127191031.245214-3-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Date: Thu Feb 13 15:55:17 2025 +0100
kbuild: userprogs: fix bitsize and target detection on clang
commit 1b71c2fb04e7a713abc6edde4a412416ff3158f2 upstream.
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
Fixes: feb843a469fb ("kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Brian Norris <briannorris@chromium.org>
Date: Fri Dec 13 10:08:23 2024 -0800
kunit: platform: Resolve 'struct completion' warning
[ Upstream commit 7687c66c18c66d4ccd9949c6f641c0e7b5773483 ]
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Wed Jan 29 17:08:25 2025 -0800
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
commit 46d6c6f3ef0eaff71c2db6d77d4e2ebb7adac34f upstream.
When preparing vmcb02 for nested VMRUN (or state restore), "enter" guest
mode prior to initializing the MMU for nested NPT so that guest_mode is
set in the MMU's role. KVM's model is that all L2 MMUs are tagged with
guest_mode, as the behavior of hypervisor MMUs tends to be significantly
different than kernel MMUs.
Practically speaking, the bug is relatively benign, as KVM only directly
queries role.guest_mode in kvm_mmu_free_guest_mode_roots() and
kvm_mmu_page_ad_need_write_protect(), which SVM doesn't use, and in paths
that are optimizations (mmu_page_zap_pte() and
shadow_mmu_try_split_huge_pages()).
And while the role is incorprated into shadow page usage, because nested
NPT requires KVM to be using NPT for L1, reusing shadow pages across L1
and L2 is impossible as L1 MMUs will always have direct=1, while L2 MMUs
will have direct=0.
Hoist the TLB processing and setting of HF_GUEST_MASK to the beginning
of the flow instead of forcing guest_mode in the MMU, as nothing in
nested_vmcb02_prepare_control() between the old and new locations touches
TLB flush requests or HF_GUEST_MASK, i.e. there's no reason to present
inconsistent vCPU state to the MMU.
Fixes: 69cb877487de ("KVM: nSVM: move MMU setup to nested_prepare_vmcb_control")
Cc: stable@vger.kernel.org
Reported-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Link: https://lore.kernel.org/r/20250130010825.220346-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jan 24 17:18:33 2025 -0800
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
commit c2fee09fc167c74a64adb08656cb993ea475197e upstream.
Move the conditional loading of hardware DR6 with the guest's DR6 value
out of the core .vcpu_run() loop to fix a bug where KVM can load hardware
with a stale vcpu->arch.dr6.
When the guest accesses a DR and host userspace isn't debugging the guest,
KVM disables DR interception and loads the guest's values into hardware on
VM-Enter and saves them on VM-Exit. This allows the guest to access DRs
at will, e.g. so that a sequence of DR accesses to configure a breakpoint
only generates one VM-Exit.
For DR0-DR3, the logic/behavior is identical between VMX and SVM, and also
identical between KVM_DEBUGREG_BP_ENABLED (userspace debugging the guest)
and KVM_DEBUGREG_WONT_EXIT (guest using DRs), and so KVM handles loading
DR0-DR3 in common code, _outside_ of the core kvm_x86_ops.vcpu_run() loop.
But for DR6, the guest's value doesn't need to be loaded into hardware for
KVM_DEBUGREG_BP_ENABLED, and SVM provides a dedicated VMCB field whereas
VMX requires software to manually load the guest value, and so loading the
guest's value into DR6 is handled by {svm,vmx}_vcpu_run(), i.e. is done
_inside_ the core run loop.
Unfortunately, saving the guest values on VM-Exit is initiated by common
x86, again outside of the core run loop. If the guest modifies DR6 (in
hardware, when DR interception is disabled), and then the next VM-Exit is
a fastpath VM-Exit, KVM will reload hardware DR6 with vcpu->arch.dr6 and
clobber the guest's actual value.
The bug shows up primarily with nested VMX because KVM handles the VMX
preemption timer in the fastpath, and the window between hardware DR6
being modified (in guest context) and DR6 being read by guest software is
orders of magnitude larger in a nested setup. E.g. in non-nested, the
VMX preemption timer would need to fire precisely between #DB injection
and the #DB handler's read of DR6, whereas with a KVM-on-KVM setup, the
window where hardware DR6 is "dirty" extends all the way from L1 writing
DR6 to VMRESUME (in L1).
L1's view:
==========
<L1 disables DR interception>
CPU 0/KVM-7289 [023] d.... 2925.640961: kvm_entry: vcpu 0
A: L1 Writes DR6
CPU 0/KVM-7289 [023] d.... 2925.640963: <hack>: Set DRs, DR6 = 0xffff0ff1
B: CPU 0/KVM-7289 [023] d.... 2925.640967: kvm_exit: vcpu 0 reason EXTERNAL_INTERRUPT intr_info 0x800000ec
D: L1 reads DR6, arch.dr6 = 0
CPU 0/KVM-7289 [023] d.... 2925.640969: <hack>: Sync DRs, DR6 = 0xffff0ff0
CPU 0/KVM-7289 [023] d.... 2925.640976: kvm_entry: vcpu 0
L2 reads DR6, L1 disables DR interception
CPU 0/KVM-7289 [023] d.... 2925.640980: kvm_exit: vcpu 0 reason DR_ACCESS info1 0x0000000000000216
CPU 0/KVM-7289 [023] d.... 2925.640983: kvm_entry: vcpu 0
CPU 0/KVM-7289 [023] d.... 2925.640983: <hack>: Set DRs, DR6 = 0xffff0ff0
L2 detects failure
CPU 0/KVM-7289 [023] d.... 2925.640987: kvm_exit: vcpu 0 reason HLT
L1 reads DR6 (confirms failure)
CPU 0/KVM-7289 [023] d.... 2925.640990: <hack>: Sync DRs, DR6 = 0xffff0ff0
L0's view:
==========
L2 reads DR6, arch.dr6 = 0
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit: vcpu 23 reason DR_ACCESS info1 0x0000000000000216
L2 => L1 nested VM-Exit
CPU 23/KVM-5046 [001] ..... 3410.005610: kvm_nested_vmexit_inject: reason: DR_ACCESS ext_inf1: 0x0000000000000216
CPU 23/KVM-5046 [001] d.... 3410.005610: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005611: kvm_entry: vcpu 23
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason VMREAD
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_entry: vcpu 23
L1 writes DR7, L0 disables DR interception
CPU 23/KVM-5046 [001] d.... 3410.005612: kvm_exit: vcpu 23 reason DR_ACCESS info1 0x0000000000000007
CPU 23/KVM-5046 [001] d.... 3410.005613: kvm_entry: vcpu 23
L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005613: <hack>: Set DRs, DR6 = 0xffff0ff0
A: <L1 writes DR6 = 1, no interception, arch.dr6 is still '0'>
B: CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_exit: vcpu 23 reason PREEMPTION_TIMER
CPU 23/KVM-5046 [001] d.... 3410.005614: kvm_entry: vcpu 23
C: L0 writes DR6 = 0 (arch.dr6)
CPU 23/KVM-5046 [001] d.... 3410.005614: <hack>: Set DRs, DR6 = 0xffff0ff0
L1 => L2 nested VM-Enter
CPU 23/KVM-5046 [001] d.... 3410.005616: kvm_exit: vcpu 23 reason VMRESUME
L0 reads DR6, arch.dr6 = 0
Reported-by: John Stultz <jstultz@google.com>
Closes: https://lkml.kernel.org/r/CANDhNCq5_F3HfFYABqFGCA1bPd_%2BxgNj-iDQhH4tDk%2Bwi8iZZg%40mail.gmail.com
Fixes: 375e28ffc0cf ("KVM: X86: Set host DR6 only on VMX and for KVM_DEBUGREG_WONT_EXIT")
Fixes: d67668e9dd76 ("KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250125011833.3644371-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Fri Jan 17 16:34:51 2025 -0800
KVM: x86: Reject Hyper-V's SEND_IPI hypercalls if local APIC isn't in-kernel
commit a8de7f100bb5989d9c3627d3a223ee1c863f3b69 upstream.
Advertise support for Hyper-V's SEND_IPI and SEND_IPI_EX hypercalls if and
only if the local API is emulated/virtualized by KVM, and explicitly reject
said hypercalls if the local APIC is emulated in userspace, i.e. don't rely
on userspace to opt-in to KVM_CAP_HYPERV_ENFORCE_CPUID.
Rejecting SEND_IPI and SEND_IPI_EX fixes a NULL-pointer dereference if
Hyper-V enlightenments are exposed to the guest without an in-kernel local
APIC:
dump_stack+0xbe/0xfd
__kasan_report.cold+0x34/0x84
kasan_report+0x3a/0x50
__apic_accept_irq+0x3a/0x5c0
kvm_hv_send_ipi.isra.0+0x34e/0x820
kvm_hv_hypercall+0x8d9/0x9d0
kvm_emulate_hypercall+0x506/0x7e0
__vmx_handle_exit+0x283/0xb60
vmx_handle_exit+0x1d/0xd0
vcpu_enter_guest+0x16b0/0x24c0
vcpu_run+0xc0/0x550
kvm_arch_vcpu_ioctl_run+0x170/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscal1_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
Note, checking the sending vCPU is sufficient, as the per-VM irqchip_mode
can't be modified after vCPUs are created, i.e. if one vCPU has an
in-kernel local APIC, then all vCPUs have an in-kernel local APIC.
Reported-by: Dongjie Zou <zoudongjie@huawei.com>
Fixes: 214ff83d4473 ("KVM: x86: hyperv: implement PV IPI send hypercalls")
Fixes: 2bc39970e932 ("x86/kvm/hyper-v: Introduce KVM_GET_SUPPORTED_HV_CPUID")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri Feb 21 14:01:47 2025 +0100
Linux 6.12.16
Link: https://lore.kernel.org/r/20250219082601.683263930@linuxfoundation.org
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250220104454.293283301@linuxfoundation.org
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Hardik Garg <hargar@linux.microsoft.com>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Yuli Wang <wangyuli@uniontech.com>
Date: Thu Feb 13 12:02:40 2025 +0800
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
[ Upstream commit 6287f1a8c16138c2ec750953e35039634018c84a ]
Commit 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit
system") would cause an undefined shift and an out-of-bounds read.
Commit 8bd795fedb84 ("arm64: csum: Fix OoB access in IP checksum code
for negative lengths") fixes the same issue on ARM64.
Fixes: 69e3a6aa6be2 ("LoongArch: Add checksum optimization for 64-bit system")
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Marco Crivellari <marco.crivellari@suse.com>
Date: Thu Feb 13 12:02:35 2025 +0800
LoongArch: Fix idle VS timer enqueue
[ Upstream commit edb1942542bc538707cea221e9c7923a6270465f ]
LoongArch re-enables interrupts on its idle routine and performs a
TIF_NEED_RESCHED check afterwards before putting the CPU to sleep.
The IRQs firing between the check and the idle instruction may set the
TIF_NEED_RESCHED flag. In order to deal with such a race, IRQs
interrupting __arch_cpu_idle() rollback their return address to the
beginning of __arch_cpu_idle() so that TIF_NEED_RESCHED is checked
again before going back to sleep.
However idle IRQs can also queue timers that may require a tick
reprogramming through a new generic idle loop iteration but those timers
would go unnoticed here because __arch_cpu_idle() only checks
TIF_NEED_RESCHED. It doesn't check for pending timers.
Fix this with fast-forwarding idle IRQs return address to the end of the
idle routine instead of the beginning, so that the generic idle loop can
handle both TIF_NEED_RESCHED and pending timers.
Fixes: 0603839b18f4 ("LoongArch: Add exception/interrupt handling")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bibo Mao <maobibo@loongson.cn>
Date: Thu Feb 13 12:02:56 2025 +0800
LoongArch: KVM: Fix typo issue about GCFG feature detection
[ Upstream commit bdb13252e5d1518823b81f458d9975c85d5240c2 ]
This is typo issue and misusage about GCFG feature macro. The code
is wrong, only that it does not cause obvious problem since GCFG is
set again on vCPU context switch.
Fixes: 0d0df3c99d4f ("LoongArch: KVM: Implement kvm hardware enable, disable interface")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Naushir Patuck <naush@raspberrypi.com>
Date: Wed Nov 27 11:15:14 2024 +0000
media: bcm2835-unicam: Disable trigger mode operation
[ Upstream commit 697a252bb2ea414cc1c0b4cf4e3d94a879eaf162 ]
The imx219/imx708 sensors frequently generate a single corrupt frame
(image or embedded data) when the sensor first starts. This can either
be a missing line, or invalid samples within the line. This only occurrs
using the upstream Unicam kernel driver.
Disabling trigger mode elimiates this corruption. Since trigger mode is
a legacy feature copied from the firmware driver and not expected to be
needed, remove it. Tested on the Raspberry Pi cameras and shows no ill
effects.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Arnd Bergmann <arnd@arndb.de>
Date: Mon Nov 11 11:41:42 2024 +0100
media: cxd2841er: fix 64-bit division on gcc-9
[ Upstream commit 8d46603eeeb4c6abff1d2e49f2a6ae289dac765e ]
It appears that do_div() once more gets confused by a complex
expression that ends up not quite being constant despite
__builtin_constant_p() thinking it is:
ERROR: modpost: "__aeabi_uldivmod" [drivers/media/dvb-frontends/cxd2841er.ko] undefined!
Use div_u64() instead, forcing the expression to be evaluated
first, and making it a bit more readable.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-media/CA+G9fYvvNm-aYodLaAwwTjEGtX0YxR-1R14FOA5aHKt0sSVsYg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: added Closes tags]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Fri Dec 6 10:26:49 2024 +0200
media: i2c: ds90ub913: Add error handling to ub913_hw_init()
[ Upstream commit acd8f58d7a3bce0fbd3263961cd09555c00464ba ]
Add error handling to ub913_hw_init() using a new helper function,
ub913_update_bits().
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Closes: https://lore.kernel.org/all/Zv40EQSR__JDN_0M@kekkonen.localdomain/
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Date: Fri Dec 6 10:26:50 2024 +0200
media: i2c: ds90ub953: Add error handling for i2c reads/writes
[ Upstream commit 0794c43ea1e451007e80246e1288ebbf44139397 ]
Add error handling for i2c reads/writes in various places.
Reported-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Closes: https://lore.kernel.org/all/Zv40EQSR__JDN_0M@kekkonen.localdomain/
Reviewed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Isaac Scott <isaac.scott@ideasonboard.com>
Date: Tue Dec 17 11:13:51 2024 +0000
media: uvcvideo: Add Kurokesu C1 PRO camera
[ Upstream commit 2762eab6d4140781840f253f9a04b8627017248b ]
Add support for the Kurokesu C1 PRO camera. This camera experiences the
same issues faced by the Sonix Technology Co. 292A IPC AR0330. As such,
enable the UVC_QUIRK_MJPEG_NO_EOF quirk for this device to prevent
frames from being erroneously dropped.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Isaac Scott <isaac.scott@ideasonboard.com>
Date: Thu Nov 28 14:51:44 2024 +0000
media: uvcvideo: Add new quirk definition for the Sonix Technology Co. 292a camera
[ Upstream commit 81f8c0e138c43610cf09b8d2a533068aa58e538e ]
The Sonix Technology Co. 292A camera (which uses an AR0330 sensor), can
produce MJPEG and H.264 streams concurrently. When doing so, it drops
the last packets of MJPEG frames every time the H.264 stream generates a
key frame. Set the UVC_QUIRK_MJPEG_NO_EOF quirk to work around the
issue.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Link: https://lore.kernel.org/r/20241128145144.61475-3-isaac.scott@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Isaac Scott <isaac.scott@ideasonboard.com>
Date: Thu Nov 28 14:51:43 2024 +0000
media: uvcvideo: Implement dual stream quirk to fix loss of usb packets
[ Upstream commit c2eda35e675b6ea4a0a21a4b1167b121571a9036 ]
Some cameras, such as the Sonix Technology Co. 292A, exhibit issues when
running two parallel streams, causing USB packets to be dropped when an
H.264 stream posts a keyframe while an MJPEG stream is running
simultaneously. This occasionally causes the driver to erroneously
output two consecutive JPEG images as a single frame.
To fix this, we inspect the buffer, and trigger a new frame when we
find an SOI.
Signed-off-by: Isaac Scott <isaac.scott@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20241128145144.61475-2-isaac.scott@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Edward Adam Davis <eadavis@qq.com>
Date: Sun Dec 29 18:50:39 2024 +0800
media: vidtv: Fix a null-ptr-deref in vidtv_mux_stop_thread
[ Upstream commit 1221989555db711578a327a9367f1be46500cb48 ]
syzbot report a null-ptr-deref in vidtv_mux_stop_thread. [1]
If dvb->mux is not initialized successfully by vidtv_mux_init() in the
vidtv_start_streaming(), it will trigger null pointer dereference about mux
in vidtv_mux_stop_thread().
Adjust the timing of streaming initialization and check it before
stopping it.
[1]
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 UID: 0 PID: 5842 Comm: syz-executor248 Not tainted 6.13.0-rc4-syzkaller-00012-g9b2ffa6148b1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:vidtv_mux_stop_thread+0x26/0x80 drivers/media/test-drivers/vidtv/vidtv_mux.c:471
Code: 90 90 90 90 66 0f 1f 00 55 53 48 89 fb e8 82 2e c8 f9 48 8d bb 28 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 02 7e 3b 0f b6 ab 28 01 00 00 31 ff 89 ee e8
RSP: 0018:ffffc90003f2faa8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87cfb125
RDX: 0000000000000025 RSI: ffffffff87d120ce RDI: 0000000000000128
RBP: ffff888029b8d220 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000003 R12: ffff888029b8d188
R13: ffffffff8f590aa0 R14: ffffc9000581c5c8 R15: ffff888029a17710
FS: 00007f7eef5156c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7eef5e635c CR3: 0000000076ca6000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vidtv_stop_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:209 [inline]
vidtv_stop_feed+0x151/0x250 drivers/media/test-drivers/vidtv/vidtv_bridge.c:252
dmx_section_feed_stop_filtering+0x90/0x160 drivers/media/dvb-core/dvb_demux.c:1000
dvb_dmxdev_feed_stop.isra.0+0x1ee/0x270 drivers/media/dvb-core/dmxdev.c:486
dvb_dmxdev_filter_stop+0x22a/0x3a0 drivers/media/dvb-core/dmxdev.c:559
dvb_dmxdev_filter_free drivers/media/dvb-core/dmxdev.c:840 [inline]
dvb_demux_release+0x92/0x550 drivers/media/dvb-core/dmxdev.c:1246
__fput+0x3f8/0xb60 fs/file_table.c:450
task_work_run+0x14e/0x250 kernel/task_work.c:239
get_signal+0x1d3/0x2610 kernel/signal.c:2790
arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218
do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+5e248227c80a3be8e96a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5e248227c80a3be8e96a
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Wentao Liang <vulab@iscas.ac.cn>
Date: Wed Feb 12 23:23:11 2025 +0800
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
commit fee5d688940690cc845937459e340e4e02598e90 upstream.
Add a check for the return value of mlxsw_sp_port_get_stats_raw()
in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw()
returns an error, exit the function to prevent further processing
with potentially invalid data.
Fixes: 614d509aa1e7 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy-ld Lu <andy-ld.lu@mediatek.com>
Date: Thu Jan 23 17:26:01 2025 +0800
mmc: mtk-sd: Fix register settings for hs400(es) mode
commit 3e68abf2b9cebe76c6cd4b1aca8e95cd671035a3 upstream.
For hs400(es) mode, the 'hs400-ds-delay' is typically configured in the
dts. However, some projects may only define 'mediatek,hs400-ds-dly3',
which can lead to initialization failures in hs400es mode. CMD13 reported
response crc error in the mmc_switch_status() just after switching to
hs400es mode.
[ 1.914038][ T82] mmc0: mmc_select_hs400es failed, error -84
[ 1.914954][ T82] mmc0: error -84 whilst initialising MMC card
Currently, the hs400_ds_dly3 value is set within the tuning function. This
means that the PAD_DS_DLY3 field is not configured before tuning process,
which is the reason for the above-mentioned CMD13 response crc error.
Move the PAD_DS_DLY3 field configuration into msdc_prepare_hs400_tuning(),
and add a value check of hs400_ds_delay to prevent overwriting by zero when
the 'hs400-ds-delay' is not set in the dts. In addition, since hs400(es)
only tune the PAD_DS_DLY1, the PAD_DS_DLY2_SEL bit should be cleared to
bypass it.
Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250123092644.7359-1-andy-ld.lu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:39 2025 +0000
ndisc: extend RCU protection in ndisc_send_skb()
[ Upstream commit ed6ae1f325d3c43966ec1b62ac1459e2b8e45640 ]
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF.
Fixes: 1762f7e88eb3 ("[NETNS][IPV6] ndisc - make socket control per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:33 2025 +0000
ndisc: ndisc_send_redirect() must use dev_get_by_index_rcu()
[ Upstream commit 48145a57d4bbe3496e8e4880b23ea6b511e6e519 ]
ndisc_send_redirect() is called under RCU protection, not RTNL.
It must use dev_get_by_index_rcu() instead of __dev_get_by_index()
Fixes: 2f17becfbea5 ("vrf: check the original netdevice for generating redirect")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:34 2025 +0000
ndisc: use RCU protection in ndisc_alloc_skb()
[ Upstream commit 628e6d18930bbd21f2d4562228afe27694f66da9 ]
ndisc_alloc_skb() can be called without RTNL or RCU being held.
Add RCU protection to avoid possible UAF.
Fixes: de09334b9326 ("ndisc: Introduce ndisc_alloc_skb() helper.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:35 2025 +0000
neighbour: use RCU protection in __neigh_notify()
[ Upstream commit becbd5850c03ed33b232083dd66c6e38c0c0e569 ]
__neigh_notify() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF.
Fixes: 426b5303eb43 ("[NETNS]: Modify the neighbour table code so it handles multiple network namespaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 5 15:51:09 2025 +0000
net: add dev_net_rcu() helper
[ Upstream commit 482ad2a4ace2740ca0ff1cbc8f3c7f862f3ab507 ]
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 71b8471c93fa ("ipv4: use RCU protection in ipv4_default_advmss()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roger Quadros <rogerq@kernel.org>
Date: Mon Feb 10 16:52:15 2025 +0200
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
[ Upstream commit 5db843258de1e4e6b1ef1cbd1797923c9e3de548 ]
If the XDP program doesn't result in XDP_PASS then we leak the
memory allocated by am65_cpsw_build_skb().
It is pointless to allocate SKB memory before running the XDP
program as we would be wasting CPU cycles for cases other than XDP_PASS.
Move the SKB allocation after evaluating the XDP program result.
This fixes the memleak. A performance boost is seen for XDP_DROP test.
XDP_DROP test:
Before: 460256 rx/s 0 err/s
After: 784130 rx/s 0 err/s
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-1-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Roger Quadros <rogerq@kernel.org>
Date: Mon Feb 10 16:52:17 2025 +0200
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
[ Upstream commit 4542536f664f752db5feba2c5998b165933c34f2 ]
For XDP transmit case, swdata doesn't contain SKB but the
XDP Frame. Infer the correct swdata based on buffer type
and return the XDP Frame for XDP transmit case.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Fixes: 8acacc40f733 ("net: ethernet: ti: am65-cpsw: Add minimal XDP support")
Link: https://patch.msgid.link/20250210-am65-cpsw-xdp-fixes-v1-3-ec6b1f7f1aca@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Thu Feb 6 08:30:51 2025 +0000
net: fib_rules: annotate data-races around rule->[io]ifindex
[ Upstream commit cb827db50a88aebec516151681adb6db10b688ee ]
rule->iifindex and rule->oifindex can be read without holding RTNL.
Add READ_ONCE()/WRITE_ONCE() annotations where needed.
Fixes: 32affa5578f0 ("fib: rules: no longer hold RTNL in fib_nl_dumprule()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250206083051.2494877-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Vladimir Vdovin <deliran@verdict.gg>
Date: Fri Nov 8 09:34:24 2024 +0000
net: ipv4: Cache pmtu for all packet paths if multipath enabled
[ Upstream commit 7d3f3b4367f315a61fc615e3138f3d320da8c466 ]
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191bd0 ("ipv4: use RCU protection in __ip_rt_update_pmtu()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Wed Jan 29 19:15:19 2025 -0800
net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels
[ Upstream commit 92191dd1073088753821b862b791dcc83e558e07 ]
Some lwtunnels have a dst cache for post-transformation dst.
If the packet destination did not change we may end up recording
a reference to the lwtunnel in its own cache, and the lwtunnel
state will never be freed.
Discovered by the ioam6.sh test, kmemleak was recently fixed
to catch per-cpu memory leaks. I'm not sure if rpl and seg6
can actually hit this, but in principle I don't see why not.
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250130031519.2716843-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jakub Kicinski <kuba@kernel.org>
Date: Wed Jan 29 19:15:18 2025 -0800
net: ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
commit c71a192976ded2f2f416d03c4f595cdd4478b825 upstream.
dst_cache_get() gives us a reference, we need to release it.
Discovered by the ioam6.sh test, kmemleak was recently fixed
to catch per-cpu memory leaks.
Fixes: 985ec6f5e623 ("net: ipv6: rpl_iptunnel: mitigate 2-realloc issue")
Fixes: 40475b63761a ("net: ipv6: seg6_iptunnel: mitigate 2-realloc issue")
Fixes: dce525185bc9 ("net: ipv6: ioam6_iptunnel: mitigate 2-realloc issue")
Reviewed-by: Justin Iurman <justin.iurman@uliege.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250130031519.2716843-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Tue Dec 3 13:49:43 2024 +0100
net: ipv6: ioam6_iptunnel: mitigate 2-realloc issue
[ Upstream commit dce525185bc92864e5a318040285ee070563fe34 ]
This patch mitigates the two-reallocations issue with ioam6_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration may still trigger
two reallocations (i.e., empty cache), while next iterations would only
trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
the improvement:
- inline mode:
- before: https://ibb.co/LhQ8V63
- after: https://ibb.co/x5YT2bS
- encap mode:
- before: https://ibb.co/3Cjm5m0
- after: https://ibb.co/TwpsxTC
- encap mode with tunsrc:
- before: https://ibb.co/Gpy9QPg
- after: https://ibb.co/PW1bZFT
This patch also fixes an incorrect behavior: after the insertion, the
second call to skb_cow_head() makes sure that the dev has enough
headroom in the skb for layer 2 and stuff. In that case, the "old"
dst_entry was used, which is now fixed. After discussing with Paolo, it
appears that both patches can be merged into a single one -this one-
(for the sake of readability) and target net-next.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Tue Dec 3 13:49:45 2024 +0100
net: ipv6: rpl_iptunnel: mitigate 2-realloc issue
[ Upstream commit 985ec6f5e6235242191370628acb73d7a9f0c0ea ]
This patch mitigates the two-reallocations issue with rpl_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration would still
trigger two reallocations (i.e., empty cache), while next iterations
would only trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
there is no impact (it even shows improvement):
- before: https://ibb.co/nQJhqwc
- after: https://ibb.co/4ZvW6wV
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin Iurman <justin.iurman@uliege.be>
Date: Tue Dec 3 13:49:44 2024 +0100
net: ipv6: seg6_iptunnel: mitigate 2-realloc issue
[ Upstream commit 40475b63761abb6f8fdef960d03228a08662c9c4 ]
This patch mitigates the two-reallocations issue with seg6_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration would still
trigger two reallocations (i.e., empty cache), while next iterations
would only trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
the improvement:
- before: https://ibb.co/3Cg4sNH
- after: https://ibb.co/8rQ350r
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: David Lebrun <dlebrun@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangbin Liu <liuhangbin@gmail.com>
Date: Thu Oct 10 04:00:25 2024 +0000
netdevsim: print human readable IP address
commit c71bc6da6198a6d88df86094f1052bb581951d65 upstream.
Currently, IPSec addresses are printed in hexadecimal format, which is
not user-friendly. e.g.
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] rx ipaddr=0x00000000 00000000 00000000 0100a8c0
sa[0] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] tx ipaddr=0x00000000 00000000 00000000 00000000
sa[1] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
This patch updates the code to print the IPSec address in a human-readable
format for easier debug. e.g.
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=4 tx=40
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
sa[2] tx ipaddr=::
sa[2] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[2] key=0x3167608a ca4f1397 43565909 941fa627
sa[3] rx ipaddr=2000::1
sa[3] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[3] key=0x3167608a ca4f1397 43565909 941fa627
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Author: Zichen Xie <zichenxie0106@gmail.com>
Date: Wed Dec 18 00:13:12 2024 +0800
NFS: Fix potential buffer overflowin nfs_sysfs_link_rpc_client()
[ Upstream commit 49fd4e34751e90e6df009b70cd0659dc839e7ca8 ]
name is char[64] where the size of clnt->cl_program->name remains
unknown. Invoking strcat() directly will also lead to potential buffer
overflow. Change them to strscpy() and strncat() to fix potential
issues.
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Li Lingfeng <lilingfeng3@huawei.com>
Date: Sun Jan 26 17:47:22 2025 +0800
nfsd: clear acl_access/acl_default after releasing them
commit 7faf14a7b0366f153284db0ad3347c457ea70136 upstream.
If getting acl_default fails, acl_access and acl_default will be released
simultaneously. However, acl_access will still retain a pointer pointing
to the released posix_acl, which will trigger a WARNING in
nfs3svc_release_getacl like this:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 26 PID: 3199 at lib/refcount.c:28
refcount_warn_saturate+0xb5/0x170
Modules linked in:
CPU: 26 UID: 0 PID: 3199 Comm: nfsd Not tainted
6.12.0-rc6-00079-g04ae226af01f-dirty #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:refcount_warn_saturate+0xb5/0x170
Code: cc cc 0f b6 1d b3 20 a5 03 80 fb 01 0f 87 65 48 d8 00 83 e3 01 75
e4 48 c7 c7 c0 3b 9b 85 c6 05 97 20 a5 03 01 e8 fb 3e 30 ff <0f> 0b eb
cd 0f b6 1d 8a3
RSP: 0018:ffffc90008637cd8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff83904fde
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88871ed36380
RBP: ffff888158beeb40 R08: 0000000000000001 R09: fffff520010c6f56
R10: ffffc90008637ab7 R11: 0000000000000001 R12: 0000000000000001
R13: ffff888140e77400 R14: ffff888140e77408 R15: ffffffff858b42c0
FS: 0000000000000000(0000) GS:ffff88871ed00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562384d32158 CR3: 000000055cc6a000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0xb5/0x170
? __warn+0xa5/0x140
? refcount_warn_saturate+0xb5/0x170
? report_bug+0x1b1/0x1e0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x17/0x40
? asm_exc_invalid_op+0x1a/0x20
? tick_nohz_tick_stopped+0x1e/0x40
? refcount_warn_saturate+0xb5/0x170
? refcount_warn_saturate+0xb5/0x170
nfs3svc_release_getacl+0xc9/0xe0
svc_process_common+0x5db/0xb60
? __pfx_svc_process_common+0x10/0x10
? __rcu_read_unlock+0x69/0xa0
? __pfx_nfsd_dispatch+0x10/0x10
? svc_xprt_received+0xa1/0x120
? xdr_init_decode+0x11d/0x190
svc_process+0x2a7/0x330
svc_handle_xprt+0x69d/0x940
svc_recv+0x180/0x2d0
nfsd+0x168/0x200
? __pfx_nfsd+0x10/0x10
kthread+0x1a2/0x1e0
? kthread+0xf4/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
Clear acl_access/acl_default after posix_acl_release is called to prevent
UAF from being triggered.
Fixes: a257cdd0e217 ("[PATCH] NFSD: Add server support for NFSv3 ACLs.")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241107014705.2509463-1-lilingfeng@huaweicloud.com/
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Rick Macklem <rmacklem@uoguelph.ca>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dai Ngo <dai.ngo@oracle.com>
Date: Thu Jan 30 11:01:27 2025 -0800
NFSD: fix hang in nfsd4_shutdown_callback
commit 036ac2778f7b28885814c6fbc07e156ad1624d03 upstream.
If nfs4_client is in courtesy state then there is no point to send
the callback. This causes nfsd4_shutdown_callback to hang since
cl_cb_inflight is not 0. This hang lasts about 15 minutes until TCP
notifies NFSD that the connection was dropped.
This patch modifies nfsd4_run_cb_work to skip the RPC call if
nfs4_client is in courtesy state.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Fixes: 66af25799940 ("NFSD: add courteous server support for thread with only delegation")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jeff Layton <jlayton@kernel.org>
Date: Sat Jan 25 20:13:18 2025 -0500
nfsd: validate the nfsd_serv pointer before calling svc_wake_up
commit b9382e29ca538b879645899ce45d652a304e2ed2 upstream.
nfsd_file_dispose_list_delayed can be called from the filecache
laundrette, which is shut down after the nfsd threads are shut down and
the nfsd_serv pointer is cleared. If nn->nfsd_serv is NULL then there
are no threads to wake.
Ensure that the nn->nfsd_serv pointer is non-NULL before calling
svc_wake_up in nfsd_file_dispose_list_delayed. This is safe since the
svc_serv is not freed until after the filecache laundrette is cancelled.
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://bugs.debian.org/1093734
Fixes: ffb402596147 ("nfsd: Don't leave work of closing files to a work queue")
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Sun Jan 12 15:39:51 2025 +0100
objtool/rust: add one more `noreturn` Rust function
commit cee6f9a9c87b6ecfb51845950c28216b231c3610 upstream.
Starting with Rust 1.85.0 (currently in beta, to be released 2025-02-20),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R...securityNtB2_11SecurityCtx8as_bytes()
falls through to next function _R...core3ops4drop4Drop4drop()
due to a call to the `noreturn` symbol:
core::panicking::assert_failed::<usize, usize>
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
Do so matching with `strstr` since it is a generic.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250112143951.751139-1-ojeda@kernel.org
[ Updated Cc: stable@ to include 6.13.y. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:37 2025 +0000
openvswitch: use RCU protection in ovs_vport_cmd_fill_info()
[ Upstream commit 90b2f49a502fa71090d9f4fe29a2f51fe5dff76d ]
ovs_vport_cmd_fill_info() can be called without RTNL or RCU.
Use RCU protection and dev_net_rcu() to avoid potential UAF.
Fixes: 9354d4520342 ("openvswitch: reliable interface indentification in port dumps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Mike Marshall <hubcap@omnibond.com>
Date: Wed Jan 8 14:21:08 2025 -0500
orangefs: fix a oob in orangefs_debug_write
[ Upstream commit f7c848431632598ff9bce57a659db6af60d75b39 ]
I got a syzbot report: slab-out-of-bounds Read in
orangefs_debug_write... several people suggested fixes,
I tested Al Viro's suggestion and made this patch.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: syzbot+fc519d7875f2d9186c1f@syzkaller.appspotmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jann Horn <jannh@google.com>
Date: Fri Feb 14 02:39:50 2025 +0100
partitions: mac: fix handling of bogus partition table
commit 80e648042e512d5a767da251d44132553fe04ae0 upstream.
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20250214-partition-mac-v1-1-c1c626dffbd5@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Thu Jan 2 17:43:13 2025 +0100
PCI/DPC: Quirk PIO log size for Intel Raptor Lake-P
[ Upstream commit b198499c7d2508a76243b98e7cca992f6fd2b7f7 ]
Apparently the Raptor Lake-P reference firmware configures the PIO log size
correctly, but some vendor BIOSes, including at least ASUSTeK COMPUTER INC.
Zenbook UX3402VA_UX3402VA, do not.
Apply the quirk for Raptor Lake-P. This prevents kernel complaints like:
DPC: RP PIO log size 0 is invalid
and also enables the DPC driver to dump the RP PIO Log registers when DPC
is triggered.
Note that the bug report also mentions 8086:a76e, which has been already
added by 627c6db20703 ("PCI/DPC: Quirk PIO log size for Intel Raptor Lake
Root Ports").
Link: https://lore.kernel.org/r/20250102164315.7562-1-tiwai@suse.de
Link: https://bugzilla.suse.com/show_bug.cgi?id=1234623
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Bjorn Helgaas <bhelgaas@google.com>
Date: Wed Feb 12 13:35:16 2025 -0600
PCI: Avoid FLR for Mediatek MT7922 WiFi
commit 81f64e925c29fe6e99f04b131fac1935ac931e81 upstream.
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently
does not work, and all subsequent config reads return ~0:
pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint
pciback 0000:01:00.0: not ready 65535ms after FLR; giving up
After an FLR, pci_dev_wait() waits for the device to become ready. Prior
to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"),
it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR
(~0). If it times out, pci_dev_wait() returns -ENOTTY and
__pci_reset_function_locked() tries the next available reset method.
Typically this is Secondary Bus Reset, which does work, so the MT7922 is
eventually usable.
After d591f6804e7e, if Configuration Request Retry Status Software
Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it
is something other than the special 0x0001 Vendor ID that indicates a
completion with RRS status.
When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001,
i.e., the config read was completed with RRS, or a valid Vendor ID. On the
MT7922, it seems that all config reads after FLR return ~0 indefinitely.
When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's
a valid Vendor ID and the device is now ready, so it returns with success.
After pci_dev_wait() returns success, we restore config space and continue.
Since the MT7922 is not actually ready after the FLR, the restore fails and
the device is unusable.
We considered changing pci_dev_wait() to continue polling if a
PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did
before d591f6804e7e, although we have to wait for the timeout and then fall
back to SBR. But it doesn't work for SR-IOV VFs, which *always* return
0xffff as the Vendor ID.
Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This
will cause fallback to another reset method, such as SBR.
Link: https://lore.kernel.org/r/20250212193516.88741-1-helgaas@kernel.org
Fixes: d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS")
Link: https://github.com/QubesOS/qubes-issues/issues/9689#issuecomment-2582927149
Link: https://lore.kernel.org/r/Z4pHll_6GX7OUBzQ@mail-itl
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com>
Date: Mon Jan 20 15:25:24 2025 +0530
PCI: switchtec: Add Microchip PCI100X device IDs
[ Upstream commit a3282f84b2151d254dc4abf24d1255c6382be774 ]
Add Microchip parts to the Device ID table so the driver supports PCI100x
devices.
Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA
access via NTB to work when the IOMMU is turned on.
PCI100x family has 6 variants; each variant is designed for different
application usages, different port counts and lane counts:
PCI1001 has 1 x4 upstream port and 3 x4 downstream ports
PCI1002 has 1 x4 upstream port and 4 x2 downstream ports
PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2
downstream ports
PCI1004 has 4 x4 upstream ports
PCI1005 has 1 x4 upstream port and 6 x2 downstream ports
PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports
[Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR
Microsystems, which was acquired in 1996 by Standard Microsystems Corp,
which was acquired by Microchip Technology in 2012. The PCI-SIG confirms
that Vendor ID 0x1055 is assigned to Microchip even though it's not
visible via https://pcisig.com/membership/member-companies]
Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com
Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com>
[bhelgaas: Vendor ID history]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kan Liang <kan.liang@linux.intel.com>
Date: Wed Jan 29 07:48:18 2025 -0800
perf/x86/intel: Clean up PEBS-via-PT on hybrid
[ Upstream commit 0a5561501397e2bbd0fb0e300eb489f72a90597a ]
The PEBS-via-PT feature is exposed for the e-core of some hybrid
platforms, e.g., ADL and MTL. But it never works.
$ dmesg | grep PEBS
[ 1.793888] core: cpu_atom PMU driver: PEBS-via-PT
$ perf record -c 1000 -e '{intel_pt/branch=0/,
cpu_atom/cpu-cycles,aux-output/pp}' -C8
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_atom/cpu-cycles,aux-output/pp).
"dmesg | grep -i perf" may provide additional information.
The "PEBS-via-PT" is printed if the corresponding bit of per-PMU
capabilities is set. Since the feature is supported by the e-core HW,
perf sets the bit for e-core. However, for Intel PT, if a feature is not
supported on all CPUs, it is not supported at all. The PEBS-via-PT event
cannot be created successfully.
The PEBS-via-PT is no longer enumerated on the latest hybrid platform. It
will be deprecated on future platforms with Arch PEBS. Let's remove it
from the existing hybrid platforms.
Fixes: d9977c43bff8 ("perf/x86: Register hybrid PMUs")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129154820.3755948-2-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Sean Christopherson <seanjc@google.com>
Date: Thu Jan 30 17:07:21 2025 -0800
perf/x86/intel: Ensure LBRs are disabled when a CPU is starting
commit c631a2de7ae48d50434bdc205d901423f8577c65 upstream.
Explicitly clear DEBUGCTL.LBR when a CPU is starting, prior to purging the
LBR MSRs themselves, as at least one system has been found to transfer
control to the kernel with LBRs enabled (it's unclear whether it's a BIOS
flaw or a CPU goof). Because the kernel preserves the original DEBUGCTL,
even when toggling LBRs, leaving DEBUGCTL.LBR as is results in running
with LBRs enabled at all times.
Closes: https://lore.kernel.org/all/c9d8269bff69f6359731d758e3b1135dedd7cc61.camel@redhat.com
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250131010721.470503-1-seanjc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kan Liang <kan.liang@linux.intel.com>
Date: Wed Jan 29 07:48:19 2025 -0800
perf/x86/intel: Fix ARCH_PERFMON_NUM_COUNTER_LEAF
commit 47a973fd75639fe80d59f9e1860113bb2a0b112b upstream.
The EAX of the CPUID Leaf 023H enumerates the mask of valid sub-leaves.
To tell the availability of the sub-leaf 1 (enumerate the counter mask),
perf should check the bit 1 (0x2) of EAS, rather than bit 0 (0x1).
The error is not user-visible on bare metal. Because the sub-leaf 0 and
the sub-leaf 1 are always available. However, it may bring issues in a
virtualization environment when a VMM only enumerates the sub-leaf 0.
Introduce the cpuid35_e?x to replace the macros, which makes the
implementation style consistent.
Fixes: eb467aaac21e ("perf/x86/intel: Support Architectural PerfMon Extension leaf")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250129154820.3755948-3-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Feb 3 15:10:28 2025 +0200
pinctrl: cy8c95x0: Avoid accessing reserved registers
[ Upstream commit 3fbe3fe28764455e4fc3578afb9765f46f9ce93d ]
The checks for vrtual registers in the cy8c95x0_readable_register()
and cy8c95x0_writeable_register() are not aligned and broken.
Fix that by explicitly avoiding reserved registers to be accessed.
Fixes: 71e4001a0455 ("pinctrl: pinctrl-cy8c95x0: Fix regcache")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Feb 3 15:10:29 2025 +0200
pinctrl: cy8c95x0: Enable regmap locking for debug
[ Upstream commit aac4470fa6e695e4d6ac94cc77d4690b57f1d2bc ]
When regmap locking is disabled, debugfs is also disabled.
Enable locking for debug when CONFIG_DEBUG_PINCTRL is set.
Fixes: f71aba339a66 ("pinctrl: cy8c95x0: Use single I2C lock")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Mon Feb 3 15:10:30 2025 +0200
pinctrl: cy8c95x0: Rename PWMSEL to SELPWM
[ Upstream commit 0a7404fc5399e1100b14e7e2a4af2e4fd5e3b602 ]
There are two registers in the hardware, one, "Select PWM",
is per-port configuration enabling PWM function instead of GPIO.
The other one is "PWM Select" is per-PWM selector to configure
PWM itself. Original code uses abbreviation of the latter
to describe the former. Rename it to follow the datasheet.
Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250203131506.3318201-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri Jan 17 16:21:45 2025 +0200
pinctrl: cy8c95x0: Respect IRQ trigger settings from firmware
[ Upstream commit 1ddee69108d305bbc059cbf31c0b47626796be77 ]
Some of the platforms may connect the INT pin via inversion logic
effectively make the triggering to be active-low.
Remove explicit trigger flag to respect the settings from firmware.
Without this change even idling chip produces spurious interrupts
and kernel disables the line in the result:
irq 33: nobody cared (try booting with the "irqpoll" option)
CPU: 0 UID: 0 PID: 125 Comm: irq/33-i2c-INT3 Not tainted 6.12.0-00236-g8b874ed11dae #64
Hardware name: Intel Corp. QUARK/Galileo, BIOS 0x01000900 01/01/2014
...
handlers:
[<86e86bea>] irq_default_primary_handler threaded [<d153e44a>] cy8c95x0_irq_handler [pinctrl_cy8c95x0]
Disabling IRQ #33
Fixes: e6cbbe42944d ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250117142304.596106-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Date: Wed Feb 5 12:10:58 2025 +0200
pinctrl: pinconf-generic: Print unsigned value if a format is registered
[ Upstream commit 0af4c120f5e7a1ea70aff7da2dfb65b6148a3e84 ]
Commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
unconditionally switched to printing hex values in
pinconf_generic_dump_one(). However, if a dump format is registered for the
dumped pin, the hex value is printed as well. This hex value does not
necessarily correspond 1:1 with the hardware register value (as noted by
commit 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")). As a
result, user-facing output may include information like:
output drive strength (0x100 uA).
To address this, check if a dump format is registered for the dumped
property, and print the unsigned value instead when applicable.
Fixes: 3ba11e684d16 ("pinctrl: pinconf-generic: print hex value")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/20250205101058.2034860-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michael Margolin <mrgolin@amazon.com>
Date: Wed Dec 25 13:15:48 2024 +0000
RDMA/efa: Reset device on probe failure
[ Upstream commit 123c13f10ed3627ba112172d8bd122a72cae226d ]
Make sure the device is being reset on driver exit whatever the reason
is, to keep the device aligned and allow it to close shared resources
(e.g. admin queue).
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20241225131548.15155-1-mrgolin@amazon.com
Reviewed-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Date: Wed Feb 5 00:43:43 2025 +0000
regmap-irq: Add missing kfree()
commit 32ffed055dcee17f6705f545b069e44a66067808 upstream.
Add kfree() for "d->main_status_buf" to the error-handling path to prevent
a memory leak.
Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Varadarajan Narayanan <quic_varada@quicinc.com>
Date: Wed Feb 5 13:16:56 2025 +0530
regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
commit b0eddc21900fb44f8c5db95710479865e3700fbd upstream.
Adding l2, l5 sub-node entry to mp5496 regulator node.
Cc: stable@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://patch.msgid.link/20250205074657.4142365-2-quic_varada@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Wed Feb 19 08:01:16 2025 +0100
Revert "vfio/platform: check the bounds of read/write syscalls"
This reverts commit 61ba518195d61c38c6cb86f83135e51f93735442.
It had been committed multiple times to the tree, and isn't needed
again.
Link: https://lore.kernel.org/r/a082db2605514513a0a8568382d5bd2b6f1877a0.camel@cyberus-technology.de
Reported-by: Stefan Nürnberger <stefan.nuernberger@cyberus-technology.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Thu Feb 13 13:19:57 2025 -0500
ring-buffer: Unlock resize on mmap error
commit 9ba0e1755a40f9920ad0f4168031291b3eb58d7b upstream.
Memory mapping the tracing ring buffer will disable resizing the buffer.
But if there's an error in the memory mapping like an invalid parameter,
the function exits out without re-enabling the resizing of the ring
buffer, preventing the ring buffer from being resized after that.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250213131957.530ec3c5@gandalf.local.home
Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Fri Feb 14 12:35:12 2025 -0500
ring-buffer: Update pages_touched to reflect persistent buffer content
commit 97937834ae876f29565415ab15f1284666dc6be3 upstream.
The pages_touched field represents the number of subbuffers in the ring
buffer that have content that can be read. This is used in accounting of
"dirty_pages" and "buffer_percent" to allow the user to wait for the
buffer to be filled to a certain amount before it reads the buffer in
blocking mode.
The persistent buffer never updated this value so it was set to zero, and
this accounting would take it as it had no content. This would cause user
space to wait for content even though there's enough content in the ring
buffer that satisfies the buffer_percent.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214123512.0631436e@gandalf.local.home
Fixes: 5f3b6e839f3ce ("ring-buffer: Validate boot range memory events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Fri Feb 14 10:28:20 2025 -0500
ring-buffer: Validate the persistent meta data subbuf array
commit f5b95f1fa2ef3a03f49eeec658ba97e721412b32 upstream.
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home
Fixes: c76883f18e59b ("ring-buffer: Add test if range of boot buffer is valid")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tomas Glozar <tglozar@redhat.com>
Date: Thu Jan 16 15:49:30 2025 +0100
rtla/timerlat_hist: Abort event processing on second signal
[ Upstream commit d6899e560366e10141189697502bc5521940c588 ]
If either SIGINT is received twice, or after a SIGALRM (that is, after
timerlat was supposed to stop), abort processing events currently left
in the tracefs buffer and exit immediately.
This allows the user to exit rtla without waiting for processing all
events, should that take longer than wanted, at the cost of not
processing all samples.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Tomas Glozar <tglozar@redhat.com>
Date: Thu Jan 16 15:49:31 2025 +0100
rtla/timerlat_top: Abort event processing on second signal
[ Upstream commit 80967b354a76b360943af384c10d807d98bea5c4 ]
If either SIGINT is received twice, or after a SIGALRM (that is, after
timerlat was supposed to stop), abort processing events currently left
in the tracefs buffer and exit immediately.
This allows the user to exit rtla without waiting for processing all
events, should that take longer than wanted, at the cost of not
processing all samples.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250116144931.649593-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Justin M. Forbes <jforbes@fedoraproject.org>
Date: Wed Jan 29 14:50:02 2025 -0700
rust: kbuild: add -fzero-init-padding-bits to bindgen_skip_cflags
[ Upstream commit a9c621a217128eb3fb7522cf763992d9437fd5ba ]
This seems to break the build when building with gcc15:
Unable to generate bindings: ClangDiagnostic("error: unknown
argument: '-fzero-init-padding-bits=all'\n")
Thus skip that flag.
Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Fixes: dce4aab8441d ("kbuild: Use -fzero-init-padding-bits=all")
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20250129215003.1736127-1-jforbes@fedoraproject.org
[ Slightly reworded commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Miguel Ojeda <ojeda@kernel.org>
Date: Fri Feb 7 00:20:22 2025 +0100
rust: rbtree: fix overindented list item
commit 2e4f982cf392af2f1282b5537a72144e064799e3 upstream.
Starting with Rust 1.86.0 (to be released 2025-04-03), Clippy will have
a new lint, `doc_overindented_list_items` [1], which catches cases of
overindented list items.
The lint has been added by Yutaro Ohno, based on feedback from the kernel
[2] on a patch that fixed a similar case -- commit 0c5928deada1 ("rust:
block: fix formatting in GenDisk doc").
Clippy reports a few cases in the kernel, apart from the one already
fixed in the commit above. One is this one:
error: doc list item overindented
--> rust/kernel/rbtree.rs:1152:5
|
1152 | /// null, it is a pointer to the root of the [`RBTree`].
| ^^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
= note: `-D clippy::doc-overindented-list-items` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_overindented_list_items)]`
Thus clean it up.
Cc: Yutaro Ohno <yutaro.ono.418@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: a335e9591404 ("rust: rbtree: add `RBTree::entry`")
Link: https://github.com/rust-lang/rust-clippy/pull/13711 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/13601 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Link: https://lore.kernel.org/r/20250206232022.599998-1-ojeda@kernel.org
[ There are a few other cases, so updated message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Niklas Schnelle <schnelle@linux.ibm.com>
Date: Fri Feb 7 13:30:17 2025 +0100
s390/pci: Fix handling of isolated VFs
commit 2844ddbd540fc84d7571cca65d6c43088e4d6952 upstream.
In contrast to the commit message of the fixed commit VFs whose parent
PF is not configured are not always isolated, that is put on their own
PCI domain. This is because for VFs to be added to an existing PCI
domain it is enough for that PCI domain to share the same topology ID or
PCHID. Such a matching PCI domain without a parent PF may exist when
a PF from the same PCI card created the domain with the VF being a child
of a different, non accessible, PF. While not causing technical issues
it makes the rules which VFs are isolated inconsistent.
Fix this by explicitly checking that the parent PF exists on the PCI
domain determined by the topology ID or PCHID before registering the VF.
This works because a parent PF which is under control of this Linux
instance must be enabled and configured at the point where its child VFs
appear because otherwise SR-IOV could not have been enabled on the
parent.
Fixes: 25f39d3dcb48 ("s390/pci: Ignore RID for isolated VFs")
Cc: stable@vger.kernel.org
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Niklas Schnelle <schnelle@linux.ibm.com>
Date: Fri Feb 7 13:30:16 2025 +0100
s390/pci: Pull search for parent PF out of zpci_iov_setup_virtfn()
commit 05793884a1f30509e477de9da233ab73584b1c8c upstream.
This creates a new zpci_iov_find_parent_pf() function which a future
commit can use to find if a VF has a configured parent PF. Use
zdev->rid instead of zdev->devfn such that the new function can be used
before it has been decided if the RID will be exposed and zdev->devfn is
set. Also handle the hypotheical case that the RID is not available but
there is an otherwise matching zbus.
Fixes: 25f39d3dcb48 ("s390/pci: Ignore RID for isolated VFs")
Cc: stable@vger.kernel.org
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Tejun Heo <tj@kernel.org>
Date: Fri Jan 24 12:22:12 2025 -1000
sched_ext: Fix incorrect autogroup migration detection
commit d6f3e7d564b2309e1f17e709a70eca78d7ca2bb8 upstream.
scx_move_task() is called from sched_move_task() and tells the BPF scheduler
that cgroup migration is being committed. sched_move_task() is used by both
cgroup and autogroup migrations and scx_move_task() tried to filter out
autogroup migrations by testing the destination cgroup and PF_EXITING but
this is not enough. In fact, without explicitly tagging the thread which is
doing the cgroup migration, there is no good way to tell apart
scx_move_task() invocations for racing migration to the root cgroup and an
autogroup migration.
This led to scx_move_task() incorrectly ignoring a migration from non-root
cgroup to an autogroup of the root cgroup triggering the following warning:
WARNING: CPU: 7 PID: 1 at kernel/sched/ext.c:3725 scx_cgroup_can_attach+0x196/0x340
...
Call Trace:
<TASK>
cgroup_migrate_execute+0x5b1/0x700
cgroup_attach_task+0x296/0x400
__cgroup_procs_write+0x128/0x140
cgroup_procs_write+0x17/0x30
kernfs_fop_write_iter+0x141/0x1f0
vfs_write+0x31d/0x4a0
__x64_sys_write+0x72/0xf0
do_syscall_64+0x82/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by adding an argument to sched_move_task() that indicates whether the
moving is for a cgroup or autogroup migration. After the change,
scx_move_task() is called only for cgroup migrations and renamed to
scx_cgroup_move_task().
Link: https://github.com/sched-ext/scx/issues/370
Fixes: 819513666966 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andrea Righi <arighi@nvidia.com>
Date: Mon Jan 27 23:06:16 2025 +0100
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
[ Upstream commit 1626e5ef0b00386a4fd083fa7c46c8edbd75f9b4 ]
While performing the rq locking dance in dispatch_to_local_dsq(), we may
trigger the following lock imbalance condition, in particular when
multiple tasks are rapidly changing CPU affinity (i.e., running a
`stress-ng --race-sched 0`):
[ 13.413579] =====================================
[ 13.413660] WARNING: bad unlock balance detected!
[ 13.413729] 6.13.0-virtme #15 Not tainted
[ 13.413792] -------------------------------------
[ 13.413859] kworker/1:1/80 is trying to release lock (&rq->__lock) at:
[ 13.413954] [<ffffffff873c6c48>] dispatch_to_local_dsq+0x108/0x1a0
[ 13.414111] but there are no more locks to release!
[ 13.414176]
[ 13.414176] other info that might help us debug this:
[ 13.414258] 1 lock held by kworker/1:1/80:
[ 13.414318] #0: ffff8b66feb41698 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x20/0x90
[ 13.414612]
[ 13.414612] stack backtrace:
[ 13.415255] CPU: 1 UID: 0 PID: 80 Comm: kworker/1:1 Not tainted 6.13.0-virtme #15
[ 13.415505] Workqueue: 0x0 (events)
[ 13.415567] Sched_ext: dsp_local_on (enabled+all), task: runnable_at=-2ms
[ 13.415570] Call Trace:
[ 13.415700] <TASK>
[ 13.415744] dump_stack_lvl+0x78/0xe0
[ 13.415806] ? dispatch_to_local_dsq+0x108/0x1a0
[ 13.415884] print_unlock_imbalance_bug+0x11b/0x130
[ 13.415965] ? dispatch_to_local_dsq+0x108/0x1a0
[ 13.416226] lock_release+0x231/0x2c0
[ 13.416326] _raw_spin_unlock+0x1b/0x40
[ 13.416422] dispatch_to_local_dsq+0x108/0x1a0
[ 13.416554] flush_dispatch_buf+0x199/0x1d0
[ 13.416652] balance_one+0x194/0x370
[ 13.416751] balance_scx+0x61/0x1e0
[ 13.416848] prev_balance+0x43/0xb0
[ 13.416947] __pick_next_task+0x6b/0x1b0
[ 13.417052] __schedule+0x20d/0x1740
This happens because dispatch_to_local_dsq() is racing with
dispatch_dequeue() and, when the latter wins, we incorrectly assume that
the task has been moved to dst_rq.
Fix by properly tracking the currently locked rq.
Fixes: 4d3ca89bdd31 ("sched_ext: Refactor consume_remote_task()")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuyi Zhou <zhouchuyi@bytedance.com>
Date: Wed Feb 12 15:19:36 2025 +0800
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
[ Upstream commit 2e2006c91c842c551521434466f9b4324719c9a7 ]
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Fixes: 2a52ca7c98960 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Chuyi Zhou <zhouchuyi@bytedance.com>
Date: Wed Feb 12 21:09:35 2025 +0800
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
[ Upstream commit f5717c93a1b999970f3a64d771a1a9ee68cc37d0 ]
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of
the current task, the following error will occur:
scx_foo[3795244] triggered exit kind 1024:
runtime error (called on a task not being operated on)
The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK()
when calling ops.tick(), which triggers the error during the subsequent
scx_kf_allowed_on_arg_tasks() check.
SCX_CALL_OP_TASK() was first introduced in commit 36454023f50b ("sched_ext:
Track tasks that are subjects of the in-flight SCX operation") to ensure
task's rq lock is held when accessing task's sched_group. Since ops.tick()
is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq
lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly,
the same changes should be made for ops.disable() and ops.exit_task(), as
they are also protected by task_rq_lock() and it's safe to access the
task's task_group.
Fixes: 36454023f50b ("sched_ext: Track tasks that are subjects of the in-flight SCX operation")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Nathan Chancellor <nathan@kernel.org>
Date: Fri Jan 31 15:55:28 2025 -0700
scripts/Makefile.extrawarn: Do not show clang's non-kprintf warnings at W=1
[ Upstream commit 738fc998b639407346a9e026514f0562301462cd ]
Clang's -Wformat-overflow and -Wformat-truncation have chosen to check
'%p' unlike GCC but it does not know about the kernel's pointer
extensions in lib/vsprintf.c, so the developers split that part of the
warning out for the kernel to disable because there will always be false
positives.
Commit 908dd508276d ("kbuild: enable -Wformat-truncation on clang") did
disabled these warnings but only in a block that would be called when
W=1 was not passed, so they would appear with W=1. Move the disabling of
the non-kprintf warnings to a block that always runs so that they are
never seen, regardless of warning level.
Fixes: 908dd508276d ("kbuild: enable -Wformat-truncation on clang")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501291646.VtwF98qd-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Guixin Liu <kanie@linux.alibaba.com>
Date: Wed Dec 18 09:42:14 2024 +0800
scsi: ufs: bsg: Set bsg_queue to NULL after removal
[ Upstream commit 1e95c798d8a7f70965f0f88d4657b682ff0ec75f ]
Currently, this does not cause any issues, but I believe it is necessary to
set bsg_queue to NULL after removing it to prevent potential use-after-free
(UAF) access.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20241218014214.64533-3-kanie@linux.alibaba.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avri Altman <avri.altman@wdc.com>
Date: Tue Jan 28 09:12:06 2025 +0200
scsi: ufs: core: Ensure clk_gating.lock is used only after initialization
commit 3d4114a1d34413dfffa0094c2eb7b95e61087abd upstream.
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:
[ 4.388838] INFO: trying to register non-static key.
[ 4.395673] The code is fine but needs lockdep annotation, or maybe
[ 4.402118] you didn't initialize this object before use?
[ 4.407673] turning off the locking correctness validator.
[ 4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[ 4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.413362] Call trace:
[ 4.413364] show_stack+0x18/0x24 (C)
[ 4.413374] dump_stack_lvl+0x90/0xd0
[ 4.413384] dump_stack+0x18/0x24
[ 4.413392] register_lock_class+0x498/0x4a8
[ 4.413400] __lock_acquire+0xb4/0x1b90
[ 4.413406] lock_acquire+0x114/0x310
[ 4.413413] _raw_spin_lock_irqsave+0x60/0x88
[ 4.413423] ufshcd_setup_clocks+0x2c0/0x490
[ 4.413433] ufshcd_init+0x198/0x10ec
[ 4.413437] ufshcd_pltfrm_init+0x600/0x7c0
[ 4.413444] ufs_qcom_probe+0x20/0x58
[ 4.413449] platform_probe+0x68/0xd8
[ 4.413459] really_probe+0xbc/0x268
[ 4.413466] __driver_probe_device+0x78/0x12c
[ 4.413473] driver_probe_device+0x40/0x11c
[ 4.413481] __device_attach_driver+0xb8/0xf8
[ 4.413489] bus_for_each_drv+0x84/0xe4
[ 4.413495] __device_attach+0xfc/0x18c
[ 4.413502] device_initial_probe+0x14/0x20
[ 4.413510] bus_probe_device+0xb0/0xb4
[ 4.413517] deferred_probe_work_func+0x8c/0xc8
[ 4.413524] process_scheduled_works+0x250/0x658
[ 4.413534] worker_thread+0x15c/0x2c8
[ 4.413542] kthread+0x134/0x200
[ 4.413550] ret_from_fork+0x10/0x20
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b806 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Avri Altman <avri.altman@wdc.com>
Date: Sun Nov 24 09:08:07 2024 +0200
scsi: ufs: core: Introduce a new clock_gating lock
[ Upstream commit 209f4e43b8068c24cde227f464111030430153fa ]
Introduce a new clock gating lock to serialize access to some of the clock
gating members instead of the host_lock.
While at it, simplify the code with the guard() macro and co for automatic
cleanup of the new lock. There are some explicit
spin_lock_irqsave()/spin_unlock_irqrestore() snaking instances I left
behind because I couldn't make heads or tails of it.
Additionally, move the trace_ufshcd_clk_gating() call from inside the
region protected by the lock as it doesn't needs protection.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241124070808.194860-4-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avri Altman <avri.altman@wdc.com>
Date: Sun Nov 24 09:08:05 2024 +0200
scsi: ufs: core: Introduce ufshcd_has_pending_tasks()
[ Upstream commit e738ba458e7539be1757dcdf85835a5c7b11fad4 ]
Prepare to remove hba->clk_gating.active_reqs check from
ufshcd_is_ufs_dev_busy().
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241124070808.194860-2-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avri Altman <avri.altman@wdc.com>
Date: Sun Nov 24 09:08:06 2024 +0200
scsi: ufs: core: Prepare to introduce a new clock_gating lock
[ Upstream commit 7869c6521f5715688b3d1f1c897374a68544eef0 ]
Remove hba->clk_gating.active_reqs check from ufshcd_is_ufs_dev_busy()
function to separate clock gating logic from general device busy checks.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241124070808.194860-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Avri Altman <avri.altman@wdc.com>
Date: Tue Jan 28 09:12:07 2025 +0200
scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed
[ Upstream commit 839a74b5649c9f41d939a05059b5ca6b17156d03 ]
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.
The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().
Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.
Fixes: 1ab27c9cf8b6 ("ufs: Add support for clock gating")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Jiri Olsa <jolsa@kernel.org>
Date: Tue Sep 24 13:07:30 2024 +0200
selftests/bpf: Fix uprobe consumer test
commit 4b7c05598a644782b8451e415bb56f31e5c9d3ee upstream.
With newly merged code the uprobe behaviour is slightly different
and affects uprobe consumer test.
We no longer need to check if the uprobe object is still preserved
after removing last uretprobe, because it stays as long as there's
pending/installed uretprobe instance.
This allows to run uretprobe consumers registered 'after' uprobe was
hit even if previous uretprobe got unregistered before being hit.
The uprobe object will be now removed after the last uprobe ref is
released and in such case it's held by ri->uprobe (return instance)
which is released after the uretprobe is hit.
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ihor Solodrai <ihor.solodrai@pm.me>
Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Koichiro Den <koichiro.den@canonical.com>
Date: Wed Jan 22 13:33:09 2025 +0900
selftests: gpio: gpio-sim: Fix missing chip disablements
[ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ]
Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an
instantiated device depends on"), rmdir for an active virtual devices
been prohibited.
Update gpio-sim selftest to align with the change.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Hangbin Liu <liuhangbin@gmail.com>
Date: Thu Oct 10 04:00:27 2024 +0000
selftests: rtnetlink: update netdevsim ipsec output format
commit 3ec920bb978ccdc68a7dfb304d303d598d038cb1 upstream.
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: John Keeping <jkeeping@inmusicbrands.com>
Date: Sat Feb 8 12:41:44 2025 +0000
serial: 8250: Fix fifo underflow on flush
commit 9e512eaaf8f4008c44ede3dfc0fbc9d9c5118583 upstream.
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed Dec 4 05:09:21 2024 +0200
serial: 8250_pci: Resolve WCH vendor ID ambiguity
[ Upstream commit 16076ca3a1565491bcb28689e555d569a39391c7 ]
There are two sites of the same brand: wch.cn and wch-ic.com.
They are property of the same company, but it appears that they
managed to get two different PCI vendor IDs. Rename them accordingly
using standard pattern, i.e. PCI_VENDOR_ID_...
While at it, move to PCI_VDEVICE() in the ID tables.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241204031114.1029882-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Wed Dec 4 05:09:22 2024 +0200
serial: 8250_pci: Share WCH IDs with parport_serial driver
[ Upstream commit 535a07698b8b3e6f305673102d297262cae2360a ]
parport_serial driver uses subset of WCH IDs that are present in 8250_pci.
Share them via pci_ids.h and switch parport_serial to use defined constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241204031114.1029882-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri Jan 24 18:10:47 2025 +0200
serial: port: Always update ->iotype in __uart_read_properties()
commit e8486bd50ecf63c9a1e25271f258a8d959f2672f upstream.
The documentation of the __uart_read_properties() states that
->iotype member is always altered after the function call, but
the code doesn't do that in the case when use_defaults == false
and the value of reg-io-width is unsupported. Make sure the code
follows the documentation.
Note, the current users of the uart_read_and_validate_port_properties()
will fail and the change doesn't affect their behaviour, neither
users of uart_read_port_properties() will be affected since the
alteration happens there even in the current code flow.
Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Date: Fri Jan 24 18:10:46 2025 +0200
serial: port: Assign ->iotype correctly when ->iobase is set
commit 166ac2bba167d575e7146beaa66093bc7c072f43 upstream.
Currently the ->iotype is always assigned to the UPIO_MEM when
the respective property is not found. However, this will not
support the cases when user wants to have UPIO_PORT to be set
or preserved. Support this scenario by checking ->iobase value
and default the ->iotype respectively.
Fixes: 1117a6fdc7c1 ("serial: 8250_of: Switch to use uart_read_port_properties()")
Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250124161530.398361-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Kartik Rajput <kkartik@nvidia.com>
Date: Wed Nov 27 11:40:53 2024 +0530
soc/tegra: fuse: Update Tegra234 nvmem keepout list
[ Upstream commit 836b341cc8dab680acc06a7883bfeea89680b689 ]
Various Nvidia userspace applications and tests access following fuse
via Fuse nvmem interface:
* odmid
* odminfo
* boot_security_info
* public_key_hash
* reserved_odm0
* reserved_odm1
* reserved_odm2
* reserved_odm3
* reserved_odm4
* reserved_odm5
* reserved_odm6
* reserved_odm7
* odm_lock
* pk_h1
* pk_h2
* revoke_pk_h0
* revoke_pk_h1
* security_mode
* system_fw_field_ratchet0
* system_fw_field_ratchet1
* system_fw_field_ratchet2
* system_fw_field_ratchet3
* optin_enable
Update tegra234_fuse_keepouts list to allow reading these fuse from
nvmem sysfs interface.
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
Link: https://lore.kernel.org/r/20241127061053.16775-1-kkartik@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Date: Thu Feb 6 17:57:47 2025 +0900
spi: sn-f-ospi: Fix division by zero
[ Upstream commit 3588b1c0fde2f58d166e3f94a5a58d64b893526c ]
When there is no dummy cycle in the spi-nor commands, both dummy bus cycle
bytes and width are zero. Because of the cpu's warning when divided by
zero, the warning should be avoided. Return just zero to avoid such
calculations.
Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver")
Co-developed-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kohei Ito <ito.kohei@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://patch.msgid.link/20250206085747.3834148-1-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Wed Feb 12 13:49:28 2025 +0000
team: better TEAM_OPTION_TYPE_STRING validation
[ Upstream commit 5bef3ac184b5626ea62385d6b82a1992b89d7940 ]
syzbot reported following splat [1]
Make sure user-provided data contains one nul byte.
[1]
BUG: KMSAN: uninit-value in string_nocheck lib/vsprintf.c:633 [inline]
BUG: KMSAN: uninit-value in string+0x3ec/0x5f0 lib/vsprintf.c:714
string_nocheck lib/vsprintf.c:633 [inline]
string+0x3ec/0x5f0 lib/vsprintf.c:714
vsnprintf+0xa5d/0x1960 lib/vsprintf.c:2843
__request_module+0x252/0x9f0 kernel/module/kmod.c:149
team_mode_get drivers/net/team/team_core.c:480 [inline]
team_change_mode drivers/net/team/team_core.c:607 [inline]
team_mode_option_set+0x437/0x970 drivers/net/team/team_core.c:1401
team_option_set drivers/net/team/team_core.c:375 [inline]
team_nl_options_set_doit+0x1339/0x1f90 drivers/net/team/team_core.c:2662
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x1214/0x12c0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2543
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:733
____sys_sendmsg+0x877/0xb60 net/socket.c:2573
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2627
__sys_sendmsg net/socket.c:2659 [inline]
__do_sys_sendmsg net/socket.c:2664 [inline]
__se_sys_sendmsg net/socket.c:2662 [inline]
__x64_sys_sendmsg+0x212/0x3c0 net/socket.c:2662
x64_sys_call+0x2ed6/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Reported-by: syzbot+1fcd957a82e3a1baa94d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1fcd957a82e3a1baa94d
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250212134928.1541609-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Masahiro Yamada <masahiroy@kernel.org>
Date: Tue Feb 11 09:29:06 2025 +0900
tools: fix annoying "mkdir -p ..." logs when building tools in parallel
[ Upstream commit d1d0963121769d8d16150b913fe886e48efefa51 ]
When CONFIG_OBJTOOL=y or CONFIG_DEBUG_INFO_BTF=y, parallel builds
show awkward "mkdir -p ..." logs.
$ make -j16
[ snip ]
mkdir -p /home/masahiro/ref/linux/tools/objtool && make O=/home/masahiro/ref/linux subdir=tools/objtool --no-print-directory -C objtool
mkdir -p /home/masahiro/ref/linux/tools/bpf/resolve_btfids && make O=/home/masahiro/ref/linux subdir=tools/bpf/resolve_btfids --no-print-directory -C bpf/resolve_btfids
Defining MAKEFLAGS=<value> on the command line wipes out command line
switches from the resultant MAKEFLAGS definition, even though the command
line switches are active. [1]
MAKEFLAGS puts all single-letter options into the first word, and that
word will be empty if no single-letter options were given. [2]
However, this breaks if MAKEFLAGS=<value> is given on the command line.
The tools/ and tools/% targets set MAKEFLAGS=<value> on the command
line, which breaks the following code in tools/scripts/Makefile.include:
short-opts := $(firstword -$(MAKEFLAGS))
If MAKEFLAGS really needs modification, it should be done through the
environment variable, as follows:
MAKEFLAGS=<value> $(MAKE) ...
That said, I question whether modifying MAKEFLAGS is necessary here.
The only flag we might want to exclude is --no-print-directory, as the
tools build system changes the working directory. However, people might
find the "Entering/Leaving directory" logs annoying.
I simply removed the offending MAKEFLAGS=<value>.
[1]: https://savannah.gnu.org/bugs/?62469
[2]: https://www.gnu.org/software/make/manual/make.html#Testing-Flags
Fixes: ea01fa9f63ae ("tools: Connect to the kernel build system")
Fixes: a50e43332756 ("perf tools: Honor parallel jobs")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Steven Rostedt <rostedt@goodmis.org>
Date: Fri Feb 14 11:55:47 2025 -0500
tracing: Do not allow mmap() of persistent ring buffer
commit 129fe718819cc5e24ea2f489db9ccd4371f0c6f6 upstream.
When trying to mmap a trace instance buffer that is attached to
reserve_mem, it would crash:
BUG: unable to handle page fault for address: ffffe97bd00025c8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 2862f3067 P4D 2862f3067 PUD 0
Oops: Oops: 0000 [#1] PREEMPT_RT SMP PTI
CPU: 4 UID: 0 PID: 981 Comm: mmap-rb Not tainted 6.14.0-rc2-test-00003-g7f1a5e3fbf9e-dirty #233
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:validate_page_before_insert+0x5/0xb0
Code: e2 01 89 d0 c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 <48> 8b 46 08 a8 01 75 67 66 90 48 89 f0 8b 50 34 85 d2 74 76 48 89
RSP: 0018:ffffb148c2f3f968 EFLAGS: 00010246
RAX: ffff9fa5d3322000 RBX: ffff9fa5ccff9c08 RCX: 00000000b879ed29
RDX: ffffe97bd00025c0 RSI: ffffe97bd00025c0 RDI: ffff9fa5ccff9c08
RBP: ffffb148c2f3f9f0 R08: 0000000000000004 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000200 R12: 0000000000000000
R13: 00007f16a18d5000 R14: ffff9fa5c48db6a8 R15: 0000000000000000
FS: 00007f16a1b54740(0000) GS:ffff9fa73df00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffe97bd00025c8 CR3: 00000001048c6006 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x1f
? __die+0x2e/0x40
? page_fault_oops+0x157/0x2b0
? search_module_extables+0x53/0x80
? validate_page_before_insert+0x5/0xb0
? kernelmode_fixup_or_oops.isra.0+0x5f/0x70
? __bad_area_nosemaphore+0x16e/0x1b0
? bad_area_nosemaphore+0x16/0x20
? do_kern_addr_fault+0x77/0x90
? exc_page_fault+0x22b/0x230
? asm_exc_page_fault+0x2b/0x30
? validate_page_before_insert+0x5/0xb0
? vm_insert_pages+0x151/0x400
__rb_map_vma+0x21f/0x3f0
ring_buffer_map+0x21b/0x2f0
tracing_buffers_mmap+0x70/0xd0
__mmap_region+0x6f0/0xbd0
mmap_region+0x7f/0x130
do_mmap+0x475/0x610
vm_mmap_pgoff+0xf2/0x1d0
ksys_mmap_pgoff+0x166/0x200
__x64_sys_mmap+0x37/0x50
x64_sys_call+0x1670/0x1d70
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The reason was that the code that maps the ring buffer pages to user space
has:
page = virt_to_page((void *)cpu_buffer->subbuf_ids[s]);
And uses that in:
vm_insert_pages(vma, vma->vm_start, pages, &nr_pages);
But virt_to_page() does not work with vmap()'d memory which is what the
persistent ring buffer has. It is rather trivial to allow this, but for
now just disable mmap() of instances that have their ring buffer from the
reserve_mem option.
If an mmap() is performed on a persistent buffer it will return -ENODEV
just like it would if the .mmap field wasn't defined in the
file_operations structure.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214115547.0d7287d3@gandalf.local.home
Fixes: 9b7bdf6f6ece6 ("tracing: Have trace_printk not use binary prints if boot buffer")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Mathias Nyman <mathias.nyman@linux.intel.com>
Date: Thu Feb 6 17:18:36 2025 +0200
USB: Add USB_QUIRK_NO_LPM quirk for sony xperia xz1 smartphone
commit 159daf1258227f44b26b5d38f4aa8f37b8cca663 upstream.
The fastboot tool for communicating with Android bootloaders does not
work reliably with this device if USB 2 Link Power Management (LPM)
is enabled.
Various fastboot commands are affected, including the
following, which usually reproduces the problem within two tries:
fastboot getvar kernel
getvar:kernel FAILED (remote: 'GetVar Variable Not found')
This issue was hidden on many systems up until commit 63a1f8454962
("xhci: stored cached port capability values in one place") as the xhci
driver failed to detect USB 2 LPM support if USB 3 ports were listed
before USB 2 ports in the "supported protocol capabilities".
Adding the quirk resolves the issue. No drawbacks are expected since
the device uses different USB product IDs outside of fastboot mode, and
since fastboot commands worked before, until LPM was enabled on the
tested system by the aforementioned commit.
Based on a patch from Forest <forestix@nom.one> from which most of the
code and commit message is taken.
Cc: stable <stable@kernel.org>
Reported-by: Forest <forestix@nom.one>
Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net
Tested-by: Forest <forestix@nom.one>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Wed Feb 12 19:15:15 2025 +0100
usb: cdc-acm: Check control transfer buffer size before access
commit e563b01208f4d1f609bcab13333b6c0e24ce6a01 upstream.
If the first fragment is shorter than struct usb_cdc_notification, we can't
calculate an expected_size. Log an error and discard the notification
instead of reading lengths from memory outside the received data, which can
lead to memory corruption when the expected_size decreases between
fragments, causing `expected_size - acm->nb_index` to wrap.
This issue has been present since the beginning of git history; however,
it only leads to memory corruption since commit ea2583529cd1
("cdc-acm: reassemble fragmented notifications").
A mitigating factor is that acm_ctrl_irq() can only execute after userspace
has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will
do that automatically depending on the USB device's vendor/product IDs and
its other interfaces.
Cc: stable <stable@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Marek Vasut <marek.vasut+renesas@mailbox.org>
Date: Sun Feb 9 15:56:11 2025 +0100
USB: cdc-acm: Fill in Renesas R-Car D3 USB Download mode quirk
commit 7284922f3e4fa285dff1b8bb593aa9a0b8458f30 upstream.
Add Renesas R-Car D3 USB Download mode quirk and update comments
on all the other Renesas R-Car USB Download mode quirks to discern
them from each other. This follows R-Car Series, 3rd Generation
reference manual Rev.2.00 chapter 19.2.8 USB download mode .
Fixes: 6d853c9e4104 ("usb: cdc-acm: Add DISABLE_ECHO for Renesas USB Download mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250209145708.106914-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Wed Feb 12 19:15:16 2025 +0100
usb: cdc-acm: Fix handling of oversized fragments
commit 12e712964f41d05ae034989892de445781c46730 upstream.
If we receive an initial fragment of size 8 bytes which specifies a wLength
of 1 byte (so the reassembled message is supposed to be 9 bytes long), and
we then receive a second fragment of size 9 bytes (which is not supposed to
happen), we currently wrongly bypass the fragment reassembly code but still
pass the pointer to the acm->notification_buffer to
acm_process_notification().
Make this less wrong by always going through fragment reassembly when we
expect more fragments.
Before this patch, receiving an overlong fragment could lead to `newctrl`
in acm_process_notification() being uninitialized data (instead of data
coming from the device).
Cc: stable <stable@kernel.org>
Fixes: ea2583529cd1 ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Date: Mon Feb 3 11:58:24 2025 +0100
usb: core: fix pipe creation for get_bMaxPacketSize0
commit 4aac0db5a0ebc599d4ad9bf5ebab78afa1f33e10 upstream.
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c556216 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org>
Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Date: Fri Jan 24 18:33:25 2025 +0100
usb: dwc2: gadget: remove of_node reference upon udc_stop
commit 58cd423820d5b5610977e55e4acdd06628829ede upstream.
In dwc2_hsotg_udc_start(), e.g. when binding composite driver, "of_node"
is set to hsotg->dev->of_node.
It causes errors when binding the gadget driver several times, on
stm32mp157c-ev1 board. Below error is seen:
"pin PA10 already requested by 49000000.usb-otg; cannot claim for gadget.0"
The first time, no issue is seen as when registering the driver, of_node
isn't NULL:
-> gadget_dev_desc_UDC_store
-> usb_gadget_register_driver_owner
-> driver_register
...
-> really_probe -> pinctrl_bind_pins (no effect)
Then dwc2_hsotg_udc_start() sets of_node.
The second time (stop the gadget, reconfigure it, then start it again),
of_node has been set, so the probing code tries to acquire pins for the
gadget. These pins are hold by the controller, hence the error.
So clear gadget.dev.of_node in udc_stop() routine to avoid the issue.
Fixes: 7d7b22928b90 ("usb: gadget: s3c-hsotg: Propagate devicetree to gadget drivers")
Cc: stable <stable@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250124173325.2747710-1-fabrice.gasnier@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Selvarasu Ganesan <selvarasu.g@samsung.com>
Date: Sat Feb 1 22:09:02 2025 +0530
usb: dwc3: Fix timeout issue during controller enter/exit from halt state
commit d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 upstream.
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Roy Luo <royluo@google.com>
Date: Tue Feb 4 23:36:42 2025 +0000
usb: gadget: core: flush gadget workqueue after device removal
commit 399a45e5237ca14037120b1b895bd38a3b4492ea upstream.
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Roy Luo <royluo@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: John Keeping <jkeeping@inmusicbrands.com>
Date: Thu Jan 30 19:50:34 2025 +0000
usb: gadget: f_midi: fix MIDI Streaming descriptor lengths
commit da1668997052ed1cb00322e1f3b63702615c9429 upstream.
While the MIDI jacks are configured correctly, and the MIDIStreaming
endpoint descriptors are filled with the correct information,
bNumEmbMIDIJack and bLength are set incorrectly in these descriptors.
This does not matter when the numbers of in and out ports are equal, but
when they differ the host will receive broken descriptors with
uninitialized stack memory leaking into the descriptor for whichever
value is smaller.
The precise meaning of "in" and "out" in the port counts is not clearly
defined and can be confusing. But elsewhere the driver consistently
uses this to match the USB meaning of IN and OUT viewed from the host,
so that "in" ports send data to the host and "out" ports receive data
from it.
Cc: stable <stable@kernel.org>
Fixes: c8933c3f79568 ("USB: gadget: f_midi: allow a dynamic number of input and output ports")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250130195035.3883857-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Selvarasu Ganesan <selvarasu.g@samsung.com>
Date: Sat Jan 18 11:31:33 2025 +0530
usb: gadget: f_midi: Fixing wMaxPacketSize exceeded issue during MIDI bind retries
commit 9e8b21410f310c50733f6e1730bae5a8e30d3570 upstream.
The current implementation sets the wMaxPacketSize of bulk in/out
endpoints to 1024 bytes at the end of the f_midi_bind function. However,
in cases where there is a failure in the first midi bind attempt,
consider rebinding. This scenario may encounter an f_midi_bind issue due
to the previous bind setting the bulk endpoint's wMaxPacketSize to 1024
bytes, which exceeds the ep->maxpacket_limit where configured dwc3 TX/RX
FIFO's maxpacket size of 512 bytes for IN/OUT endpoints in support HS
speed only.
Here the term "rebind" in this context refers to attempting to bind the
MIDI function a second time in certain scenarios. The situations where
rebinding is considered include:
* When there is a failure in the first UDC write attempt, which may be
caused by other functions bind along with MIDI.
* Runtime composition change : Example : MIDI,ADB to MIDI. Or MIDI to
MIDI,ADB.
This commit addresses this issue by resetting the wMaxPacketSize before
endpoint claim. And here there is no need to reset all values in the usb
endpoint descriptor structure, as all members except wMaxPacketSize and
bEndpointAddress have predefined values.
This ensures that restores the endpoint to its expected configuration,
and preventing conflicts with value of ep->maxpacket_limit. It also
aligns with the approach used in other function drivers, which treat
endpoint descriptors as if they were full speed before endpoint claim.
Fixes: 46decc82ffd5 ("usb: gadget: unconditionally allocate hs/ss descriptor in bind operation")
Cc: stable@vger.kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Link: https://lore.kernel.org/r/20250118060134.927-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Guo Ren <guoren@kernel.org>
Date: Wed Jan 22 03:12:31 2025 -0500
usb: gadget: udc: renesas_usb3: Fix compiler warning
commit 335a1fc1193481f8027f176649c72868172f6f8b upstream.
drivers/usb/gadget/udc/renesas_usb3.c: In function 'renesas_usb3_probe':
drivers/usb/gadget/udc/renesas_usb3.c:2638:73: warning: '%d'
directive output may be truncated writing between 1 and 11 bytes into a
region of size 6 [-Wformat-truncation=]
2638 | snprintf(usb3_ep->ep_name, sizeof(usb3_ep->ep_name), "ep%d", i);
^~~~~~~~~~~~~~~~~~~~~~~~ ^~ ^
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501201409.BIQPtkeB-lkp@intel.com/
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250122081231.47594-1-guoren@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Alan Stern <stern@rowland.harvard.edu>
Date: Wed Jan 22 14:26:17 2025 -0500
USB: hub: Ignore non-compliant devices with too many configs or interfaces
commit 2240fed37afbcdb5e8b627bc7ad986891100e05d upstream.
Robert Morris created a test program which can cause
usb_hub_to_struct_hub() to dereference a NULL or inappropriate
pointer:
Oops: general protection fault, probably for non-canonical address
0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14
Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021
Workqueue: usb_hub_wq hub_event
RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110
...
Call Trace:
<TASK>
? die_addr+0x31/0x80
? exc_general_protection+0x1b4/0x3c0
? asm_exc_general_protection+0x26/0x30
? usb_hub_adjust_deviceremovable+0x78/0x110
hub_probe+0x7c7/0xab0
usb_probe_interface+0x14b/0x350
really_probe+0xd0/0x2d0
? __pfx___device_attach_driver+0x10/0x10
__driver_probe_device+0x6e/0x110
driver_probe_device+0x1a/0x90
__device_attach_driver+0x7e/0xc0
bus_for_each_drv+0x7f/0xd0
__device_attach+0xaa/0x1a0
bus_probe_device+0x8b/0xa0
device_add+0x62e/0x810
usb_set_configuration+0x65d/0x990
usb_generic_driver_probe+0x4b/0x70
usb_probe_device+0x36/0xd0
The cause of this error is that the device has two interfaces, and the
hub driver binds to interface 1 instead of interface 0, which is where
usb_hub_to_struct_hub() looks.
We can prevent the problem from occurring by refusing to accept hub
devices that violate the USB spec by having more than one
configuration or interface.
Reported-and-tested-by: Robert Morris <rtm@csail.mit.edu>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Huacai Chen <chenhuacai@kernel.org>
Date: Sun Feb 2 20:49:35 2025 +0800
USB: pci-quirks: Fix HCCPARAMS register error for LS7A EHCI
commit e71f7f42e3c874ac3314b8f250e8416a706165af upstream.
LS7A EHCI controller doesn't have extended capabilities, so the EECP
(EHCI Extended Capabilities Pointer) field of HCCPARAMS register should
be 0x0, but it reads as 0xa0 now. This is a hardware flaw and will be
fixed in future, now just clear the EECP field to avoid error messages
on boot:
......
[ 0.581675] pci 0000:00:04.1: EHCI: unrecognized capability ff
[ 0.581699] pci 0000:00:04.1: EHCI: unrecognized capability ff
[ 0.581716] pci 0000:00:04.1: EHCI: unrecognized capability ff
[ 0.581851] pci 0000:00:04.1: EHCI: unrecognized capability ff
......
[ 0.581916] pci 0000:00:05.1: EHCI: unrecognized capability ff
[ 0.581951] pci 0000:00:05.1: EHCI: unrecognized capability ff
[ 0.582704] pci 0000:00:05.1: EHCI: unrecognized capability ff
[ 0.582799] pci 0000:00:05.1: EHCI: unrecognized capability ff
......
Cc: stable <stable@kernel.org>
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250202124935.480500-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lei Huang <huanglei@kylinos.cn>
Date: Wed Feb 12 17:38:29 2025 +0800
USB: quirks: add USB_QUIRK_NO_LPM quirk for Teclast dist
commit e169d96eecd447ff7fd7542ca5fa0911f5622054 upstream.
Teclast disk used on Huawei hisi platforms doesn't work well,
losing connectivity intermittently if LPM is enabled.
Add quirk disable LPM to resolve the issue.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Elson Roy Serrao <quic_eserrao@quicinc.com>
Date: Thu Feb 6 11:39:50 2025 -0800
usb: roles: set switch registered flag early on
commit 634775a752a86784511018a108f3b530cc3399a7 upstream.
The role switch registration and set_role() can happen in parallel as they
are invoked independent of each other. There is a possibility that a driver
might spend significant amount of time in usb_role_switch_register() API
due to the presence of time intensive operations like component_add()
which operate under common mutex. This leads to a time window after
allocating the switch and before setting the registered flag where the set
role notifications are dropped. Below timeline summarizes this behavior
Thread1 | Thread2
usb_role_switch_register() |
| |
---> allocate switch |
| |
---> component_add() | usb_role_switch_set_role()
| | |
| | --> Drop role notifications
| | since sw->registered
| | flag is not set.
| |
--->Set registered flag.|
To avoid this, set the registered flag early on in the switch register
API.
Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Chester A. Unal <chester.a.unal@arinc9.com>
Date: Fri Jan 24 10:28:00 2025 +0000
USB: serial: option: add MeiG Smart SLM828
commit db79e75460fc59b19f9c89d4b068e61cee59f37d upstream.
MeiG Smart SLM828 is an LTE-A CAT6 modem with the mPCIe form factor. The
"Cls=ff(vend.) Sub=10 Prot=02" and "Cls=ff(vend.) Sub=10 Prot=03"
interfaces respond to AT commands. Add these interfaces.
The product ID the modem uses is shared across multiple modems. Therefore,
add comments to describe which interface is used for which modem.
T: Bus=01 Lev=01 Prnt=05 Port=01 Cnt=01 Dev#= 6 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d22 Rev=05.04
S: Manufacturer=MEIG
S: Product=LTE-A Module
S: SerialNumber=4da7ec42
C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=(none)
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=(none)
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
Link: https://lore.kernel.org/20250124-for-johan-meig-slm828-v2-1-6b4cd3f6344f@arinc9.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Wed Feb 5 18:16:45 2025 +0100
USB: serial: option: add Telit Cinterion FN990B compositions
commit c979fb5ece2dc11cc9cc3d5c66f750e210bfdee2 upstream.
Add the following Telit Cinterion FN990B40 compositions:
0x10d0: rmnet + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d0 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d1: MBIM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d1 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d2: RNDIS + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d2 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x10d3: ECM + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) +
tty (diag) + DPL + QDSS (Qualcomm Debug SubSystem) + adb
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 20 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=10d3 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN990
S: SerialNumber=43b38f19
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 8 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none)
E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Johan Hovold <johan@kernel.org>
Date: Tue Feb 11 15:45:16 2025 +0100
USB: serial: option: drop MeiG Smart defines
commit 6aa8a63c471eb6756aabd03f880feffe6a7af6c9 upstream.
Several MeiG Smart modems apparently use the same product id, making the
defines even less useful.
Drop them in favour of using comments consistently to make the id table
slightly less unwieldy.
Cc: stable@vger.kernel.org
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Wed Feb 5 18:16:47 2025 +0100
USB: serial: option: fix Telit Cinterion FN990A name
commit 12606fe73f33647c5e79bf666833bf0b225e649d upstream.
The correct name for FN990 is FN990A so use it in order to avoid
confusion with FN990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Pecio <michal.pecio@gmail.com>
Date: Tue Jan 28 10:45:29 2025 +0100
usb: xhci: Restore xhci_pci support for Renesas HCs
commit c81d9fcd5b9402166048f377d4e5e0ee6f9ef26d upstream.
Some Renesas HCs require firmware upload to work, this is handled by the
xhci_pci_renesas driver. Other variants of those chips load firmware from
a SPI flash and are ready to work with xhci_pci alone.
A refactor merged in v6.12 broke the latter configuration so that users
are finding their hardware ignored by the normal driver and are forced to
enable the firmware loader which isn't really necessary on their systems.
Let xhci_pci work with those chips as before when the firmware loader is
disabled by kernel configuration.
Fixes: 25f51b76f90f ("xhci-pci: Make xhci-pci-renesas a proper modular driver")
Cc: stable <stable@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219616
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219726
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://lore.kernel.org/r/20250128104529.58a79bfc@foxbook
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ankit Agrawal <ankita@nvidia.com>
Date: Fri Jan 24 18:31:00 2025 +0000
vfio/nvgrace-gpu: Expose the blackwell device PF BAR1 to the VM
[ Upstream commit 6a9eb2d125ba90d13b45bcfabcddf9f61268f6a8 ]
There is a HW defect on Grace Hopper (GH) to support the
Multi-Instance GPU (MIG) feature [1] that necessiated the presence
of a 1G region carved out from the device memory and mapped as
uncached. The 1G region is shown as a fake BAR (comprising region 2 and 3)
to workaround the issue.
The Grace Blackwell systems (GB) differ from GH systems in the following
aspects:
1. The aforementioned HW defect is fixed on GB systems.
2. There is a usable BAR1 (region 2 and 3) on GB systems for the
GPUdirect RDMA feature [2].
This patch accommodate those GB changes by showing the 64b physical
device BAR1 (region2 and 3) to the VM instead of the fake one. This
takes care of both the differences.
Moreover, the entire device memory is exposed on GB as cacheable to
the VM as there is no carveout required.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
Link: https://docs.nvidia.com/cuda/gpudirect-rdma/ [2]
Cc: Kevin Tian <kevin.tian@intel.com>
CC: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-3-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ankit Agrawal <ankita@nvidia.com>
Date: Fri Jan 24 18:30:59 2025 +0000
vfio/nvgrace-gpu: Read dvsec register to determine need for uncached resmem
[ Upstream commit bd53764a60ad586ad5b6ed339423ad5e67824464 ]
NVIDIA's recently introduced Grace Blackwell (GB) Superchip is a
continuation with the Grace Hopper (GH) superchip that provides a
cache coherent access to CPU and GPU to each other's memory with
an internal proprietary chip-to-chip cache coherent interconnect.
There is a HW defect on GH systems to support the Multi-Instance
GPU (MIG) feature [1] that necessiated the presence of a 1G region
with uncached mapping carved out from the device memory. The 1G
region is shown as a fake BAR (comprising region 2 and 3) to
workaround the issue. This is fixed on the GB systems.
The presence of the fix for the HW defect is communicated by the
device firmware through the DVSEC PCI config register with ID 3.
The module reads this to take a different codepath on GB vs GH.
Scan through the DVSEC registers to identify the correct one and use
it to determine the presence of the fix. Save the value in the device's
nvgrace_gpu_pci_core_device structure.
Link: https://www.nvidia.com/en-in/technologies/multi-instance-gpu/ [1]
CC: Jason Gunthorpe <jgg@nvidia.com>
CC: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20250124183102.3976-2-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Ramesh Thomas <ramesh.thomas@intel.com>
Date: Tue Dec 10 05:19:37 2024 -0800
vfio/pci: Enable iowrite64 and ioread64 for vfio pci
[ Upstream commit 2b938e3db335e3670475e31a722c2bee34748c5a ]
Definitions of ioread64 and iowrite64 macros in asm/io.h called by vfio
pci implementations are enclosed inside check for CONFIG_GENERIC_IOMAP.
They don't get defined if CONFIG_GENERIC_IOMAP is defined. Include
linux/io-64-nonatomic-lo-hi.h to define iowrite64 and ioread64 macros
when they are not defined. io-64-nonatomic-lo-hi.h maps the macros to
generic implementation in lib/iomap.c. The generic implementation does
64 bit rw if readq/writeq is defined for the architecture, otherwise it
would do 32 bit back to back rw.
Note that there are two versions of the generic implementation that
differs in the order the 32 bit words are written if 64 bit support is
not present. This is not the little/big endian ordering, which is
handled separately. This patch uses the lo followed by hi word ordering
which is consistent with current back to back implementation in the
vfio/pci code.
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20241210131938.303500-2-ramesh.thomas@intel.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Fri Feb 7 13:58:38 2025 +0000
vrf: use RCU protection in l3mdev_l3_out()
[ Upstream commit 6d0ce46a93135d96b7fa075a94a88fe0da8e8773 ]
l3mdev_l3_out() can be called without RCU being held:
raw_sendmsg()
ip_push_pending_frames()
ip_send_skb()
ip_local_out()
__ip_local_out()
l3mdev_ip_out()
Add rcu_read_lock() / rcu_read_unlock() pair to avoid
a potential UAF.
Fixes: a8e3e1a9f020 ("net: l3mdev: Add hook to output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Tue Jan 28 14:15:27 2025 +0100
vsock: Keep the binding until socket destruction
commit fcdd2242c0231032fc84e1404315c245ae56322a upstream.
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
__kasan_slab_alloc+0x85/0x90
kmem_cache_alloc_noprof+0x131/0x450
sk_prot_alloc+0x5b/0x220
sk_alloc+0x2c/0x870
__vsock_create.constprop.0+0x2e/0xb60
vsock_create+0xe4/0x420
__sock_create+0x241/0x650
__sys_socket+0xf2/0x1a0
__x64_sys_socket+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2057:
kasan_save_stack+0x1e/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x37/0x60
__kasan_slab_free+0x4b/0x70
kmem_cache_free+0x1a1/0x590
__sk_destruct+0x388/0x5a0
__vsock_bind+0x5e1/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:25 refcount_warn_saturate+0xce/0x150
RIP: 0010:refcount_warn_saturate+0xce/0x150
__vsock_bind+0x66d/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
refcount_t: underflow; use-after-free.
WARNING: CPU: 7 PID: 2057 at lib/refcount.c:28 refcount_warn_saturate+0xee/0x150
RIP: 0010:refcount_warn_saturate+0xee/0x150
vsock_remove_bound+0x187/0x1e0
__vsock_release+0x383/0x4a0
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x359/0xa80
task_work_run+0x107/0x1d0
do_exit+0x847/0x2560
do_group_exit+0xb8/0x250
__x64_sys_exit_group+0x3a/0x50
x64_sys_call+0xfec/0x14f0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-1-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Michal Luczaj <mhal@rbox.co>
Date: Mon Feb 10 13:15:00 2025 +0100
vsock: Orphan socket after transport release
commit 78dafe1cf3afa02ed71084b350713b07e72a18fb upstream.
During socket release, sock_orphan() is called without considering that it
sets sk->sk_wq to NULL. Later, if SO_LINGER is enabled, this leads to a
null pointer dereferenced in virtio_transport_wait_close().
Orphan the socket only after transport release.
Partially reverts the 'Fixes:' commit.
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
lock_acquire+0x19e/0x500
_raw_spin_lock_irqsave+0x47/0x70
add_wait_queue+0x46/0x230
virtio_transport_release+0x4e7/0x7f0
__vsock_release+0xfd/0x490
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x35e/0xa90
__x64_sys_close+0x78/0xd0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reported-by: syzbot+9d55b199192a4be7d02c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9d55b199192a4be7d02c
Fixes: fcdd2242c023 ("vsock: Keep the binding until socket destruction")
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-1-ef6244d02b54@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Feb 10 10:52:42 2025 +0000
vxlan: check vxlan_vnigroup_init() return value
[ Upstream commit 5805402dcc56241987bca674a1b4da79a249bab7 ]
vxlan_init() must check vxlan_vnigroup_init() success
otherwise a crash happens later, spotted by syzbot.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000002c: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000160-0x0000000000000167]
CPU: 0 UID: 0 PID: 7313 Comm: syz-executor147 Not tainted 6.14.0-rc1-syzkaller-00276-g69b54314c975 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:vxlan_vnigroup_uninit+0x89/0x500 drivers/net/vxlan/vxlan_vnifilter.c:912
Code: 00 48 8b 44 24 08 4c 8b b0 98 41 00 00 49 8d 86 60 01 00 00 48 89 c2 48 89 44 24 10 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4d 04 00 00 49 8b 86 60 01 00 00 48 ba 00 00 00
RSP: 0018:ffffc9000cc1eea8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000000001 RCX: ffffffff8672effb
RDX: 000000000000002c RSI: ffffffff8672ecb9 RDI: ffff8880461b4f18
RBP: ffff8880461b4ef4 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000020000
R13: ffff8880461b0d80 R14: 0000000000000000 R15: dffffc0000000000
FS: 00007fecfa95d6c0(0000) GS:ffff88806a600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fecfa95cfb8 CR3: 000000004472c000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vxlan_uninit+0x1ab/0x200 drivers/net/vxlan/vxlan_core.c:2942
unregister_netdevice_many_notify+0x12d6/0x1f30 net/core/dev.c:11824
unregister_netdevice_many net/core/dev.c:11866 [inline]
unregister_netdevice_queue+0x307/0x3f0 net/core/dev.c:11736
register_netdevice+0x1829/0x1eb0 net/core/dev.c:10901
__vxlan_dev_create+0x7c6/0xa30 drivers/net/vxlan/vxlan_core.c:3981
vxlan_newlink+0xd1/0x130 drivers/net/vxlan/vxlan_core.c:4407
rtnl_newlink_create net/core/rtnetlink.c:3795 [inline]
__rtnl_newlink net/core/rtnetlink.c:3906 [inline]
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Reported-by: syzbot+6a9624592218c2c5e7aa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/67a9d9b4.050a0220.110943.002d.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250210105242.883482-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Date: Thu Jan 23 21:51:38 2025 +0530
wifi: ath12k: fix handling of 6 GHz rules
commit 64a1ba4072b34af1b76bf15fca5c2075b8cc4d64 upstream.
In the US country code, to avoid including 6 GHz rules in the 5 GHz rules
list, the number of 5 GHz rules is set to a default constant value of 4
(REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz
rules, the current logic will bypass the legitimate 6 GHz rules.
For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the
current logic will only consider 4 of the 5 GHz rules, treating the last
valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never
processed, leading to the eventual disabling of 6 GHz channels.
To fix this issue, instead of hardcoding the value to 4, use a helper
function to determine the number of 6 GHz rules present in the 5 GHz rules
list and ignore only those rules.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Cc: stable@vger.kernel.org
Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250123-fix_6ghz_rules_handling-v1-1-d734bfa58ff4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Ping-Ke Shih <pkshih@realtek.com>
Date: Mon Nov 11 14:38:35 2024 +0800
wifi: rtw89: pci: disable PCIE wake bit when PCIE deinit
commit 9c1df813e08832c3836c254bc8a2f83ff22dbc06 upstream.
The PCIE wake bit is to control PCIE wake signal to host. When PCIE is
going down, clear this bit to prevent waking up host unexpectedly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Date: Thu Jan 23 16:25:35 2025 +0800
workqueue: Put the pwq after detaching the rescuer from the pool
[ Upstream commit e76946110137703c16423baf6ee177b751a34b7e ]
The commit 68f83057b913("workqueue: Reap workers via kthread_stop() and
remove detach_completion") adds code to reap the normal workers but
mistakenly does not handle the rescuer and also removes the code waiting
for the rescuer in put_unbound_pool(), which caused a use-after-free bug
reported by Cheung Wall.
To avoid the use-after-free bug, the pool’s reference must be held until
the detachment is complete. Therefore, move the code that puts the pwq
after detaching the rescuer from the pool.
Reported-by: cheung wall <zzqq0103.hey@gmail.com>
Cc: cheung wall <zzqq0103.hey@gmail.com>
Link: https://lore.kernel.org/lkml/CAKHoSAvP3iQW+GwmKzWjEAOoPvzeWeoMO0Gz7Pp3_4kxt-RMoA@mail.gmail.com/
Fixes: 68f83057b913("workqueue: Reap workers via kthread_stop() and remove detach_completion")
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Patrick Bellasi <derkling@google.com>
Date: Wed Feb 5 14:04:41 2025 +0000
x86/cpu/kvm: SRSO: Fix possible missing IBPB on VM-Exit
commit 318e8c339c9a0891c389298bb328ed0762a9935e upstream.
In [1] the meaning of the synthetic IBPB flags has been redefined for a
better separation of concerns:
- ENTRY_IBPB -- issue IBPB on entry only
- IBPB_ON_VMEXIT -- issue IBPB on VM-Exit only
and the Retbleed mitigations have been updated to match this new
semantics.
Commit [2] was merged shortly before [1], and their interaction was not
handled properly. This resulted in IBPB not being triggered on VM-Exit
in all SRSO mitigation configs requesting an IBPB there.
Specifically, an IBPB on VM-Exit is triggered only when
X86_FEATURE_IBPB_ON_VMEXIT is set. However:
- X86_FEATURE_IBPB_ON_VMEXIT is not set for "spec_rstack_overflow=ibpb",
because before [1] having X86_FEATURE_ENTRY_IBPB was enough. Hence,
an IBPB is triggered on entry but the expected IBPB on VM-exit is
not.
- X86_FEATURE_IBPB_ON_VMEXIT is not set also when
"spec_rstack_overflow=ibpb-vmexit" if X86_FEATURE_ENTRY_IBPB is
already set.
That's because before [1] this was effectively redundant. Hence, e.g.
a "retbleed=ibpb spec_rstack_overflow=bpb-vmexit" config mistakenly
reports the machine still vulnerable to SRSO, despite an IBPB being
triggered both on entry and VM-Exit, because of the Retbleed selected
mitigation config.
- UNTRAIN_RET_VM won't still actually do anything unless
CONFIG_MITIGATION_IBPB_ENTRY is set.
For "spec_rstack_overflow=ibpb", enable IBPB on both entry and VM-Exit
and clear X86_FEATURE_RSB_VMEXIT which is made superfluous by
X86_FEATURE_IBPB_ON_VMEXIT. This effectively makes this mitigation
option similar to the one for 'retbleed=ibpb', thus re-order the code
for the RETBLEED_MITIGATION_IBPB option to be less confusing by having
all features enabling before the disabling of the not needed ones.
For "spec_rstack_overflow=ibpb-vmexit", guard this mitigation setting
with CONFIG_MITIGATION_IBPB_ENTRY to ensure UNTRAIN_RET_VM sequence is
effectively compiled in. Drop instead the CONFIG_MITIGATION_SRSO guard,
since none of the SRSO compile cruft is required in this configuration.
Also, check only that the required microcode is present to effectively
enabled the IBPB on VM-Exit.
Finally, update the KConfig description for CONFIG_MITIGATION_IBPB_ENTRY
to list also all SRSO config settings enabled by this guard.
Fixes: 864bcaa38ee4 ("x86/cpu/kvm: Provide UNTRAIN_RET_VM") [1]
Fixes: d893832d0e1e ("x86/srso: Add IBPB on VMEXIT") [2]
Reported-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Patrick Bellasi <derkling@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Rik van Riel <riel@fb.com>
Date: Wed Dec 4 21:03:16 2024 -0500
x86/mm/tlb: Only trim the mm_cpumask once a second
[ Upstream commit 6db2526c1d694c91c6e05e2f186c085e9460f202 ]
Setting and clearing CPU bits in the mm_cpumask is only ever done
by the CPU itself, from the context switch code or the TLB flush
code.
Synchronization is handled by switch_mm_irqs_off() blocking interrupts.
Sending TLB flush IPIs to CPUs that are in the mm_cpumask, but no
longer running the program causes a regression in the will-it-scale
tlbflush2 test. This test is contrived, but a large regression here
might cause a small regression in some real world workload.
Instead of always sending IPIs to CPUs that are in the mm_cpumask,
but no longer running the program, send these IPIs only once a second.
The rest of the time we can skip over CPUs where the loaded_mm is
different from the target mm.
Reported-by: kernel test roboto <oliver.sang@intel.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20241204210316.612ee573@fangorn
Closes: https://lore.kernel.org/oe-lkp/202411282207.6bd28eae-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Andrew Cooper <andrew.cooper3@citrix.com>
Date: Sat Dec 21 21:10:46 2024 +0000
x86/static-call: Remove early_boot_irqs_disabled check to fix Xen PVH dom0
commit 5cc2db37124bb33914996d6fdbb2ddb3811f2945 upstream.
__static_call_update_early() has a check for early_boot_irqs_disabled, but
is used before early_boot_irqs_disabled is set up in start_kernel().
Xen PV has always special cased early_boot_irqs_disabled, but Xen PVH does
not and falls over the BUG when booting as dom0.
It is very suspect that early_boot_irqs_disabled starts as 0, becomes 1 for
a time, then becomes 0 again, but as this needs backporting to fix a
breakage in a security fix, dropping the BUG_ON() is the far safer option.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219620
Reported-by: Alex Zenla <alex@edera.dev>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alex Zenla <alex@edera.dev>
Link: https://lore.kernel.org/r/20241221211046.6475-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Juergen Gross <jgross@suse.com>
Date: Tue Feb 11 11:16:28 2025 +0100
x86/xen: allow larger contiguous memory regions in PV guests
[ Upstream commit e93ec87286bd1fd30b7389e7a387cfb259f297e3 ]
Today a PV guest (including dom0) can create 2MB contiguous memory
regions for DMA buffers at max. This has led to problems at least
with the megaraid_sas driver, which wants to allocate a 2.3MB DMA
buffer.
The limiting factor is the frame array used to do the hypercall for
making the memory contiguous, which has 512 entries and is just a
static array in mmu_pv.c.
In order to not waste memory for non-PV guests, put the initial
frame array into .init.data section and dynamically allocate an array
from the .init_after_bootmem hook of PV guests.
In case a contiguous memory area larger than the initially supported
2MB is requested, allocate a larger buffer for the frame list. Note
that such an allocation is tried only after memory management has been
initialized properly, which is tested via a flag being set in the
.init_after_bootmem hook.
Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers")
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Alan Robinson <Alan.Robinson@fujitsu.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Author: Juergen Gross <jgross@suse.com>
Date: Mon Feb 10 08:43:39 2025 +0100
xen/swiotlb: relax alignment requirements
[ Upstream commit 85fcb57c983f423180ba6ec5d0034242da05cc54 ]
When mapping a buffer for DMA via .map_page or .map_sg DMA operations,
there is no need to check the machine frames to be aligned according
to the mapped areas size. All what is needed in these cases is that the
buffer is contiguous at machine level.
So carve out the alignment check from range_straddles_page_boundary()
and move it to a helper called by xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() directly.
Fixes: 9f40ec84a797 ("xen/swiotlb: add alignment check for dma buffers")
Reported-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Tested-by: Jan Vejvalka <jan.vejvalka@lfmotol.cuni.cz>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>