Author: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Date: Fri Jul 12 15:06:42 2024 -0300
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
commit 8fc1e8b230771442133d5cf5fa4313277aa2bb8b upstream.
Positivo SU C1400 is equipped with ALC256, and it needs
ALC269_FIXUP_ASPIRE_HEADSET_MIC quirk to make its headset mic work.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240712180642.22564-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Seunghun Han <kkamagui@gmail.com>
Date: Thu Jul 18 17:09:08 2024 +0900
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
commit d7063c08738573fc2f3296da6d31a22fa8aa843a upstream.
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID
144d:c1a4 requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shenghao Ding <shenghao-ding@ti.com>
Date: Wed Jul 17 19:53:04 2024 +0800
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
commit 1e5597e5ff18d452cf9afa847e904f301d1ac690 upstream.
Add new vendor_id and subsystem_id in quirk for Lenovo Hera2 Laptop.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717115305.723-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Shengjiu Wang <shengjiu.wang@nxp.com>
Date: Wed Jul 17 14:44:53 2024 +0800
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
commit 88e98af9f4b5b0d60c1fe7f7f2701b5467691e75 upstream.
When suspended, the DMA channel may enter PAUSE state if dmaengine_pause()
is supported by DMA.
At this state, dmaengine_synchronize() should not be called, otherwise
the DMA channel can't be resumed successfully.
Fixes: e8343410ddf0 ("ALSA: dmaengine: Synchronize dma channel after drop()")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/1721198693-27636-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Wed Jul 17 10:33:01 2024 +0200
ALSA: seq: ump: Skip useless ports for static blocks
commit 3bfd7c0ba184de99e9f5083b29e5308f30767265 upstream.
When the UMP Endpoint is configured with static blocks, the block
configuration will never change, hence the unused ports will be
unchanged as well. Creating sequencer ports for those unused ports
is simply useless, and it might be rather confusing for users.
The idea behind the inactive ports was for allowing connections
from/to ports that can become usable later, but this will never
happen for inactive groups in static blocks.
Let's change the sequencer UMP binding to skip those unused ports when
the UMP EP is with static blocks.
Fixes: 81fd444aa371 ("ALSA: seq: Bind UMP device")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240717083322.25892-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:41 2024 +0530
arm64: dts: qcom: ipq6018: Disable SS instance in Parkmode for USB
commit 4ae4837871ee8c8b055cf8131f65d31ee4208fa0 upstream.
For Gen-1 targets like IPQ6018, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ6018 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 20bb9e3dd2e4 ("arm64: dts: qcom: ipq6018: add usb3 DT description")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:42 2024 +0530
arm64: dts: qcom: ipq8074: Disable SS instance in Parkmode for USB
commit dc6ba95c6c4400a84cca5b419b34ae852a08cfb5 upstream.
For Gen-1 targets like IPQ8074, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for IPQ8074 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 5e09bc51d07b ("arm64: dts: ipq8074: enable USB support")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:47 2024 +0530
arm64: dts: qcom: msm8996: Disable SS instance in Parkmode for USB
commit 44ea1ae3cf95db97e10d6ce17527948121f1dd4b upstream.
For Gen-1 targets like MSM8996, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8996 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-8-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:43 2024 +0530
arm64: dts: qcom: msm8998: Disable SS instance in Parkmode for USB
commit 0046325ae52079b46da13a7f84dd7b2a6f7c38f8 upstream.
For Gen-1 targets like MSM8998, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for MSM8998 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 026dad8f5873 ("arm64: dts: qcom: msm8998: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-4-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jun 5 11:55:56 2024 +0300
arm64: dts: qcom: qrb2210-rb1: switch I2C2 to i2c-gpio
commit b7b545ccc08873e107aa24c461b1fdb123dd3761 upstream.
On the Qualcomm RB1 platform the I2C bus connected to the LT9611UXC
bridge under some circumstances can go into a state when all transfers
timeout. This causes both issues with fetching of EDID and with
updating of the bridge's firmware. While we are debugging the issue,
switch corresponding I2C bus to use i2c-gpio driver. While using
i2c-gpio no communication issues are observed.
This patch is asusmed to be a temporary fix, so it is implemented in a
non-intrusive manner to simply reverting it later.
Fixes: 616eda24edd4 ("arm64: dts: qcom: qrb2210-rb1: Set up HDMI")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-1-946f5d6b6948@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Date: Wed Jun 5 11:55:57 2024 +0300
arm64: dts: qcom: qrb4210-rb2: switch I2C2 to i2c-gpio
commit f77e7bd40c3c2d79685e9cc80de874b69a976f55 upstream.
On the Qualcomm RB2 platform the I2C bus connected to the LT9611UXC
bridge under some circumstances can go into a state when all transfers
timeout. This causes both issues with fetching of EDID and with
updating of the bridge's firmware. While we are debugging the issue,
switch corresponding I2C bus to use i2c-gpio driver. While using
i2c-gpio no communication issues are observed.
This patch is asusmed to be a temporary fix, so it is implemented in a
non-intrusive manner to simply reverting it later.
Fixes: f7b01e07e89c ("arm64: dts: qcom: qrb4210-rb2: Enable display out")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240605-rb12-i2c2g-pio-v2-2-946f5d6b6948@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Tue Jun 4 11:36:58 2024 +0530
arm64: dts: qcom: sc7180: Disable SuperSpeed instances in park mode
commit 5b8baed4b88132c12010ce6ca1b56f00d122e376 upstream.
On SC7180, in host mode, it is observed that stressing out controller
results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7180 to mitigate this issue.
Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: 0b766e7fe5a2 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-2-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Tue Jun 4 11:36:59 2024 +0530
arm64: dts: qcom: sc7280: Disable SuperSpeed instances in park mode
commit 3d930f1750ce30a6c36dbc71f8ff7e20322b94d7 upstream.
On SC7280, in host mode, it is observed that stressing out controller
results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instances in park mode for SC7280 to mitigate this issue.
Reported-by: Doug Anderson <dianders@google.com>
Cc: stable@vger.kernel.org
Fixes: bb9efa59c665 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240604060659.1449278-3-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:44 2024 +0530
arm64: dts: qcom: sdm630: Disable SS instance in Parkmode for USB
commit fad58a41b84667cb6c9232371fc3af77d4443889 upstream.
For Gen-1 targets like SDM630, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM630 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: c65a4ed2ea8b ("arm64: dts: qcom: sdm630: Add USB configuration")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-5-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:48 2024 +0530
arm64: dts: qcom: sdm845: Disable SS instance in Parkmode for USB
commit cf4d6d54eadb60d2ee4d31c9d92299f5e8dcb55c upstream.
For Gen-1 targets like SDM845, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SDM845 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: ca4db2b538a1 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-9-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:45 2024 +0530
arm64: dts: qcom: sm6115: Disable SS instance in Parkmode for USB
commit 074992a1163295d717faa21d1818c4c19ef6e676 upstream.
For Gen-1 targets like SM6115, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6115 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 97e563bf5ba1 ("arm64: dts: qcom: sm6115: Add basic soc dtsi")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-6-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Krishna Kurapati <quic_kriskura@quicinc.com>
Date: Thu Jul 4 20:58:46 2024 +0530
arm64: dts: qcom: sm6350: Disable SS instance in Parkmode for USB
commit c5d57eb7d06df16c07037cea5dacfd74d49d1833 upstream.
For Gen-1 targets like SM6350, it is seen that stressing out the
controller in host mode results in HC died error:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
And at this instant only restarting the host mode fixes it. Disable
SuperSpeed instance in park mode for SM6350 to mitigate this issue.
Cc: stable@vger.kernel.org
Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240704152848.3380602-7-quic_kriskura@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Thu May 30 18:43:39 2024 +0300
arm64: dts: qcom: x1e80100-crd: Fix the PHY regulator for PCIe 6a
commit cf7d2157aa87dca6f078a2d4867fd0a9dbc357aa upstream.
The actual PHY regulator is L1d instead of L3j, so fix it accordingly.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-1-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Thu May 30 19:35:45 2024 +0300
arm64: dts: qcom: x1e80100-crd: Fix USB PHYs regulators
commit ae5cee8e7349d7e5deff4cf90a08cbd738287155 upstream.
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.
Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-1-6eb72a546227@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Thu May 30 18:43:40 2024 +0300
arm64: dts: qcom: x1e80100-qcp: Fix the PHY regulator for PCIe 6a
commit 87042003f6ea7d075784db98da6903738a38f3cf upstream.
The actual PHY regulator is L1d instead of L3j, so fix it accordingly.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-pcie6a-v1-2-ee17a9939ba5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Abel Vesa <abel.vesa@linaro.org>
Date: Thu May 30 19:35:46 2024 +0300
arm64: dts: qcom: x1e80100-qcp: Fix USB PHYs regulators
commit 20676f7819d7364b7e8bd437b212106faa893b49 upstream.
The 1.2v HS PHY shared regulator is actually LDO2 from PM8550ve id J.
Also add the missing supplies to QMP PHYs.
Fixes: f9a9c11471da ("arm64: dts: qcom: x1e80100-qcp: Enable more support")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: stable@vger.kernel.org # 6.9
Link: https://lore.kernel.org/r/20240530-x1e80100-dts-fix-usb-phy-supplies-v1-2-6eb72a546227@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dan Carpenter <dan.carpenter@linaro.org>
Date: Sun Apr 28 15:57:00 2024 +0300
drm/amdgpu: Fix signedness bug in sdma_v4_0_process_trap_irq()
commit 6769a23697f17f9bf9365ca8ed62fe37e361a05a upstream.
The "instance" variable needs to be signed for the error handling to work.
Fixes: 8b2faf1a4f3b ("drm/amdgpu: add error handle to avoid out-of-bounds")
Reviewed-by: Bob Zhou <bob.zhou@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Siddh Raman Pant <siddh.raman.pant@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Jann Horn <jannh@google.com>
Date: Tue Jul 23 17:03:56 2024 +0200
filelock: Fix fcntl/close race recovery compat path
commit f8138f2ad2f745b9a1c696a05b749eabe44337ea upstream.
When I wrote commit 3cad1bc01041 ("filelock: Remove locks reliably when
fcntl/close race is detected"), I missed that there are two copies of the
code I was patching: The normal version, and the version for 64-bit offsets
on 32-bit kernels.
Thanks to Greg KH for stumbling over this while doing the stable
backport...
Apply exactly the same fix to the compat path for 32-bit kernels.
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: stable@kernel.org
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20240723-fs-lock-recover-compatfix-v1-1-148096719529@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Date: Mon Jun 3 13:13:17 2024 +0300
fs/ntfs3: Add a check for attr_names and oatbl
commit 702d4930eb06dcfda85a2fa67e8a1a27bfa2a845 upstream.
Added out-of-bound checking for *ane (ATTR_NAME_ENTRY).
Reported-by: lei lu <llfamsec@gmail.com>
Fixes: 865e7a7700d93 ("fs/ntfs3: Reduce stack usage")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: lei lu <llfamsec@gmail.com>
Date: Wed May 29 02:52:22 2024 +0800
fs/ntfs3: Validate ff offset
commit 50c47879650b4c97836a0086632b3a2e300b0f06 upstream.
This adds sanity checks for ff offset. There is a check
on rt->first_free at first, but walking through by ff
without any check. If the second ff is a large offset.
We may encounter an out-of-bound read.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: lei lu <llfamsec@gmail.com>
Date: Wed May 29 02:30:40 2024 +0800
jfs: don't walk off the end of ealist
commit d0fa70aca54c8643248e89061da23752506ec0d4 upstream.
Add a check before visiting the members of ea to
make sure each ea stays within the ealist.
Signed-off-by: lei lu <llfamsec@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Sat Jul 27 11:36:19 2024 +0200
Linux 6.9.12
Link: https://lore.kernel.org/r/20240725142731.678993846@linuxfoundation.org
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: lei lu <llfamsec@gmail.com>
Date: Wed Jun 26 18:44:33 2024 +0800
ocfs2: add bounds checking to ocfs2_check_dir_entry()
commit 255547c6bb8940a97eea94ef9d464ea5967763fb upstream.
This adds sanity checks for ocfs2_dir_entry to make sure all members of
ocfs2_dir_entry don't stray beyond valid memory region.
Link: https://lkml.kernel.org/r/20240626104433.163270-1-llfamsec@gmail.com
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Date: Mon Jul 15 20:04:16 2024 +0200
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
commit df39038cd89525d465c2c8827eb64116873f141a upstream.
There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on
s390. Therefore we do not expect to see VM_FAULT_HWPOISON in
do_exception().
However, since commit af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more
general"), it is possible to see VM_FAULT_HWPOISON in combination with
PTE_MARKER_POISONED, even on architectures that do not support HWPOISON
otherwise. In this case, we will end up on the BUG() in do_exception().
Fix this by treating VM_FAULT_HWPOISON the same as VM_FAULT_SIGBUS, similar
to x86 when MEMORY_FAILURE is not configured. Also print unexpected fault
flags, for easier debugging.
Note that VM_FAULT_HWPOISON_LARGE is not expected, because s390 cannot
support swap entries on other levels than PTE level.
Cc: stable@vger.kernel.org # 6.6+
Fixes: af19487f00f3 ("mm: make PTE_MARKER_SWAPIN_ERROR more general")
Reported-by: Yunseong Kim <yskelg@gmail.com>
Tested-by: Yunseong Kim <yskelg@gmail.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Message-ID: <20240715180416.3632453-1-gerald.schaefer@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Si-Wei Liu <si-wei.liu@oracle.com>
Date: Wed Jul 24 10:04:51 2024 -0700
tap: add missing verification for short frame
commit ed7f2afdd0e043a397677e597ced0830b83ba0b3 upstream.
The cited commit missed to check against the validity of the frame length
in the tap_get_user_xdp() path, which could cause a corrupted skb to be
sent downstack. Even before the skb is transmitted, the
tap_get_user_xdp()-->skb_set_network_header() may assume the size is more
than ETH_HLEN. Once transmitted, this could either cause out-of-bound
access beyond the actual length, or confuse the underlayer with incorrect
or inconsistent header length in the skb metadata.
In the alternative path, tap_get_user() already prohibits short frame which
has the length less than Ethernet header size from being transmitted.
This is to drop any frame shorter than the Ethernet header size just like
how tap_get_user() does.
CVE: CVE-2024-41090
Link: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/
Fixes: 0efac27791ee ("tap: accept an array of XDP buffs through sendmsg()")
Cc: stable@vger.kernel.org
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240724170452.16837-2-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Dongli Zhang <dongli.zhang@oracle.com>
Date: Wed Jul 24 10:04:52 2024 -0700
tun: add missing verification for short frame
commit 049584807f1d797fc3078b68035450a9769eb5c3 upstream.
The cited commit missed to check against the validity of the frame length
in the tun_xdp_one() path, which could cause a corrupted skb to be sent
downstack. Even before the skb is transmitted, the
tun_xdp_one-->eth_type_trans() may access the Ethernet header although it
can be less than ETH_HLEN. Once transmitted, this could either cause
out-of-bound access beyond the actual length, or confuse the underlayer
with incorrect or inconsistent header length in the skb metadata.
In the alternative path, tun_get_user() already prohibits short frame which
has the length less than Ethernet header size from being transmitted for
IFF_TAP.
This is to drop any frame shorter than the Ethernet header size just like
how tun_get_user() does.
CVE: CVE-2024-41091
Inspired-by: https://lore.kernel.org/netdev/1717026141-25716-1-git-send-email-si-wei.liu@oracle.com/
Fixes: 043d222f93ab ("tuntap: accept an array of XDP buffs through sendmsg()")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20240724170452.16837-3-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Author: Takashi Iwai <tiwai@suse.de>
Date: Mon Jul 8 11:57:17 2024 +0200
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
commit 3eb27d3e32c78badbc4db6ae76614b5961e32291 upstream.
The MIDI2 gadget driver handled the default MIDI protocol version
incorrectly due to the confusion of the protocol version passed via
configfs (either 1 or 2) and UMP protocol bits (0x100 / 0x200).
As a consequence, the default protocol always resulted in MIDI1.
This patch addresses the misunderstanding of the protocol handling.
Fixes: 29ee7a4dddd5 ("usb: gadget: midi2: Add configfs support")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240708095719.25627-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>