[ новости /+++ | форум | теги | ]

NAME

resource_controls - resource controls available through project database
 

DESCRIPTION

The resource controls facility is configured through the project database. See project(4). You can set and modify resource controls through the following utilities:

o prctl(1)

o projadd(1M)

o projmod(1M)

o rctladm(1M)

In a program, you use setrctl(2) to set resource control values.

In addition to the preceding resource controls, there are resource pools, accessible through the pooladm(1M) and poolcfg(1M) utilities. In a program, resource pools can be manipulated through the libpool(3LIB) library.

The following are the resource controls are available:

process.max-address-space

Maximum amount of address space, as summed over segment sizes, that is available to this process, expressed as a number of bytes.

process.max-core-size

Maximum size of a core file created by this process, expressed as a number of bytes.

process.max-cpu-time

Maximum CPU time that is available to this process, expressed as a number of seconds.

process.max-data-size

Maximum heap memory available to this process, expressed as a number of bytes.

process.max-file-descriptor

Maximum file descriptor index available to this process, expressed as an integer.

process.max-file-size

Maximum file offset available for writing by this process, expressed as a number of bytes.

process.max-msg-messages

Maximum number of messages on a message queue (value copied from the resource control at msgget() time), expressed as an integer.

process.max-msg-qbytes

Maximum number of bytes of messages on a message queue (value copied from the resource control at msgget() time), expressed as a number of bytes.

process.max-port-events

Maximum allowable number of events per event port, expressed as an integer.

process.max-sem-nsems

Maximum number of semaphores allowed per semaphore set, expressed as an integer.

process.max-sem-ops

Maximum number of semaphore operations allowed per semop call (value copied from the resource control at semget() time). Expressed as an integer, specifying the number of operations.

process.max-stack-size

Maximum stack memory segment available to this process, expressed as a number of bytes.

project.cpu-caps

Maximum amount of CPU resources that a project can use. The unit used is the percentage of a single CPU that can be used by all user threads in a project. Expressed as an integer. The cap does not apply to threads running in real-time scheduling class. This resource control does not support the syslog action.

project.cpu-shares

Number of CPU shares granted to a project for use with the fair share scheduler (see FSS(7)). The unit used is the number of shares (an integer). This resource control does not support the syslog action.

project.max-contracts

Maximum number of contracts allowed in a project, expressed as an integer.

project.max-crypto-memory

Maximum amount of kernel memory that can be used for crypto operations. Allocations in the kernel for buffers and session-related structures are charged against this resource control.

project.max-locked-memory

Total amount of physical memory locked by device drivers and user processes (including D/ISM), expressed as a number of bytes.

project.max-lwps

Maximum number of LWPs simultaneously available to a project, expressed as an integer.

project.max-msg-ids

Maximum number of message queue IDs allowed for a project, expressed as an integer.

project.max-port-ids

Maximum allowable number of event ports, expressed as an integer.

project.max-sem-ids

Maximum number of semaphore IDs allowed for a project, expressed as an integer.

project.max-shm-ids

Maximum number of shared memory IDs allowed for a project, expressed as an integer.

project.max-shm-memory

Total amount of shared memory allowed for a project, expressed as a number of bytes.

project.max-tasks

Maximum number of tasks allowable in a project, expressed as an integer.

project.pool

Binds a specified resource pool with a project.

rcap.max-rss

The total amount of physical memory, in bytes, that is available to processes in a project.

task.max-cpu-time

Maximum CPU time that is available to this task's processes, expressed as a number of seconds.

task.max-lwps

Maximum number of LWPs simultaneously available to this task's processes, expressed as an integer.

The following zone-wide resource controls are available:

zone.cpu-cap

Sets a limit on the amount of CPU time that can be used by a zone. The unit used is the percentage of a single CPU that can be used by all user threads in a zone. Expressed as an integer. When projects within the capped zone have their own caps, the minimum value takes precedence. This resource control does not support the syslog action.

zone.cpu-shares

Sets a limit on the number of fair share scheduler (FSS) CPU shares for a zone. CPU shares are first allocated to the zone, and then further subdivided among projects within the zone as specified in the project.cpu-shares entries. Expressed as an integer. This resource control does not support the syslog action.

zone.max-locked-memory

Total amount of physical locked memory available to a zone.

zone.max-lwps

Enhances resource isolation by preventing too many LWPs in one zone from affecting other zones. A zone's total LWPs can be further subdivided among projects within the zone within the zone by using project.max-lwps entries. Expressed as an integer.

zone.max-msg-ids

Maximum number of message queue IDs allowed for a zone, expressed as an integer.

zone.max-sem-ids

Maximum number of semaphore IDs allowed for a zone, expressed as an integer.

zone.max-shm-ids

Maximum number of shared memory IDs allowed for a zone, expressed as an integer.

zone.max-shm-memory

Total amount of shared memory allowed for a zone, expressed as a number of bytes.

zone.max-swap

Total amount of swap that can be consumed by user process address space mappings and tmpfs mounts for this zone.

See zones(5).  

Units Used in Resource Controls

Resource controls can be expressed as in units of size (bytes), time (seconds), or as a count (integer). These units use the strings specified below.

Category             Res Ctrl      Modifier  Scale
                    Type String
-----------          -----------   --------  -----
Size                 bytes         B         1
                                  KB        2^10
                                  MB        2^20
                                  GB        2^30
                                  TB        2^40
                                  PB        2^50
                                  EB        2^60

Time                 seconds       s         1
                                  Ks        10^3
                                  Ms        10^6
                                  Gs        10^9
                                  Ts        10^12
                                  Ps        10^15
                                  Es        10^18

Count                integer       none      1
                                  K         10^3
                                  M         10^6
                                  G         10^9
                                  T         10^12
                                  P         10^15
                                  Es        10^18

Scaled values can be used with resource controls. The following example shows a scaled threshold value:

task.max-lwps=(priv,1K,deny)

In the project file, the value 1K is expanded to 1000:

task.max-lwps=(priv,1000,deny)

A second example uses a larger scaled value:

process.max-file-size=(priv,5G,deny)

In the project file, the value 5G is expanded to 5368709120:

process.max-file-size=(priv,5368709120,deny)

The preceding examples use the scaling factors specified in the table above.

Note that unit modifiers (for example, 5G) are accepted by the prctl(1), projadd(1M), and projmod(1M) commands. You cannot use unit modifiers in the project database itself.  

Resource Control Values and Privilege Levels

A threshold value on a resource control constitutes a point at which local actions can be triggered or global actions, such as logging, can occur.

Each threshold value on a resource control must be associated with a privilege level. The privilege level must be one of the following three types:

basic

Can be modified by the owner of the calling process.

privileged

Can be modified by the current process (requiring sys_resource privilege) or by prctl(1) (requiring proc_owner privilege).

system

Fixed for the duration of the operating system instance.

A resource control is guaranteed to have one system value, which is defined by the system, or resource provider. The system value represents how much of the resource the current implementation of the operating system is capable of providing.

Any number of privileged values can be defined, and only one basic value is allowed. Operations that are performed without specifying a privilege value are assigned a basic privilege by default.

The privilege level for a resource control value is defined in the privilege field of the resource control block as RCTL_BASIC, RCTL_PRIVILEGED, or RCTL_SYSTEM. See setrctl(2) for more information. You can use the prctl command to modify values that are associated with basic and privileged levels.

In specifying the privilege level of privileged, you can use the abbreviation priv. For example:

task.max-lwps=(priv,1K,deny)

Global and Local Actions on Resource Control Values

There are two categories of actions on resource control values: global and local.

Global actions apply to resource control values for every resource control on the system. You can use rctladm(1M) to perform the following actions:

o Display the global state of active system resource controls.

o Set global logging actions.

You can disable or enable the global logging action on resource controls. You can set the syslog action to a specific degree by assigning a severity level, syslog=level. The possible settings for level are as follows:

o debug

o info

o notice

o warning

o err

o crit

o alert

o emerg

By default, there is no global logging of resource control violations.

Local actions are taken on a process that attempts to exceed the control value. For each threshold value that is placed on a resource control, you can associate one or more actions. There are three types of local actions: none, deny, and signal=. These three actions are used as follows:

none

No action is taken on resource requests for an amount that is greater than the threshold. This action is useful for monitoring resource usage without affecting the progress of applications. You can also enable a global message that displays when the resource control is exceeded, while, at the same time, the process exceeding the threshhold is not affected.

deny

You can deny resource requests for an amount that is greater than the threshold. For example, a task.max-lwps resource control with action deny causes a fork() system call to fail if the new process would exceed the control value. See the fork(2).

signal=

You can enable a global signal message action when the resource control is exceeded. A signal is sent to the process when the threshold value is exceeded. Additional signals are not sent if the process consumes additional resources. Available signals are listed below.

Not all of the actions can be applied to every resource control. For example, a process cannot exceed the number of CPU shares assigned to the project of which it is a member. Therefore, a deny action is not allowed on the project.cpu-shares resource control.

Due to implementation restrictions, the global properties of each control can restrict the range of available actions that can be set on the threshold value. (See rctladm(1M).) A list of available signal actions is presented in the following list. For additional information about signals, see signal(3HEAD).

The following are the signals available to resource control values:

SIGABRT

Terminate the process.

SIGHUP

Send a hangup signal. Occurs when carrier drops on an open line. Signal sent to the process group that controls the terminal.

SIGTERM

Terminate the process. Termination signal sent by software.

SIGKILL

Terminate the process and kill the program.

SIGSTOP

Stop the process. Job control signal.

SIGXRES

Resource control limit exceeded. Generated by resource control facility.

SIGXFSZ

Terminate the process. File size limit exceeded. Available only to resource controls with the RCTL_GLOBAL_FILE_SIZE property (process.max-file-size). See rctlblk_set_value(3C).

SIGXCPU

Terminate the process. CPU time limit exceeded. Available only to resource controls with the RCTL_GLOBAL_CPUTIME property (process.max-cpu-time). See rctlblk_set_value(3C).

Resource Control Flags and Properties

Each resource control on the system has a certain set of associated properties. This set of properties is defined as a set of flags, which are associated with all controlled instances of that resource. Global flags cannot be modified, but the flags can be retrieved by using either rctladm(1M) or the setrctl(2) system call.

Local flags define the default behavior and configuration for a specific threshold value of that resource control on a specific process or process collective. The local flags for one threshold value do not affect the behavior of other defined threshold values for the same resource control. However, the global flags affect the behavior for every value associated with a particular control. Local flags can be modified, within the constraints supplied by their corresponding global flags, by the prctl command or the setrctl system call. See setrctl(2).

For the complete list of local flags, global flags, and their definitions, see rctlblk_set_value(3C).

To determine system behavior when a threshold value for a particular resource control is reached, use rctladm to display the global flags for the resource control . For example, to display the values for process.max-cpu-time, enter:

$ rctladm process.max-cpu-time
process.max-cpu-time  syslog=off [ lowerable no-deny cpu-time inf seconds ]

The global flags indicate the following:

lowerable

Superuser privileges are not required to lower the privileged values for this control.

no-deny

Even when threshold values are exceeded, access to the resource is never denied.

cpu-time

SIGXCPU is available to be sent when threshold values of this resource are reached.

seconds

The time value for the resource control.

Use the prctl command to display local values and actions for the resource control. For example:

$ prctl -n process.max-cpu-time $$
   process 353939: -ksh
   NAME    PRIVILEGE    VALUE    FLAG   ACTION              RECIPIENT
process.max-cpu-time
        privileged   18.4Es    inf   signal=XCPU                 -
        system       18.4Es    inf   none

The max (RCTL_LOCAL_MAXIMAL) flag is set for both threshold values, and the inf (RCTL_GLOBAL_INFINITE) flag is defined for this resource control. An inf value has an infinite quantity. The value is never enforced. Hence, as configured, both threshold quantities represent infinite values that are never exceeded.  

Resource Control Enforcement

More than one resource control can exist on a resource. A resource control can exist at each containment level in the process model. If resource controls are active on the same resource at different container levels, the smallest container's control is enforced first. Thus, action is taken on process.max-cpu-time before task.max-cpu-time if both controls are encountered simultaneously.  

ATTRIBUTES

See attributes(5) for a description of the following attributes:

ATTRIBUTE TYPE ATTRIBUTE VALUE Interface Stability Evolving

SEE ALSO

prctl(1), pooladm(1M), poolcfg(1M), projadd(1M), projmod(1M), rctladm(1M), setrctl(2), rctlblk_set_value(3C), libpool(3LIB), project(4), attributes(5), FSS(7)

System Administration Guide: Virtualization Using the Solaris Operating System

Index

NAME

DESCRIPTION

Units Used in Resource Controls

Resource Control Values and Privilege Levels

Global and Local Actions on Resource Control Values

Resource Control Flags and Properties

Resource Control Enforcement

ATTRIBUTES

SEE ALSO

Партнёры:

Хостинг: