The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

audiohd (7)
  • >> audiohd (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    audiohd - HD  audio  controller generic codec audio core support..
     
    

    DESCRIPTION

    The audiohd driver provides support for the generic codec chips which are compatible with the Intel High-Definition Audio Controller 1.0 specification.  

    API

    This interface is described in the mixer(7I) and audio(7I) manual pages.  

    Driver Versions

    Applications that open /dev/audio may use the AUDIO_GETDEV ioctl(2) to determine which audio device is being used. The audiohd driver returns the string SUNW,audiohd in the name field of the audio_device structure. The version field contains a letter "a" and the config field contains the string onboard1.

    Platform Ver.OutH. Phone Spkr.InMic.CD
    x86/64 w/MCP HD audioaYYYYYY

    Key to the above table: Ver. = Version. Out = Line Out. H. Phone = Head Phone. Spkr = Internal Speaker. In = Line In. Mic. = Microphone. CD = CD=ROM.

    The audiohd device provides support for the internal speaker, headphone, line out, line in, microphone and replicated front panel audio parts. The play.mod_ports and record.mod_ports fields of the audio_info structure (see audio(7I)) indicate which ports may be manipulated.  

    Audio Mixer Mode

    This driver supports the mixer mode only. (Compat mode is not supported).  

    Audio Data Formats

    The audiohd device supports 16-bit linear encodings in stereo. With the mixer enabled, a continuous range of sample rates from 5510 to 48000 Hz is supported. With the mixer disabled, only sample rate 48000 Hz is supported.  

    Sample Granularity

    Because the audiohd device follows the Intel HD Audio specification, buffers of audio data are supplied by streams and the reported input and output sample counts vary at any given time from the actual sample count by no more than the size of the buffers the audiohd driver is transferring. As a rule, programs should not rely on the absolute accuracy of the play.samples and record.samples fields of the audio_info structure.  

    Interrupt Rate

    The driver determines how often play and record interrupts should take place. For playing audio, this determines how often and how much audio is requested from the audio mixer. The impact of interrupts on recording is minimal. However, if a very small read buffer size is set, the record interrupt rate should be increased to prevent the buffer from overflowing. You can use the /kernel/drv/audiohd.conf file to tune the play and record interrupt rates.  

    Audio Status Change Notification

    As described in the audio(7I) and mixer(7I) man pages, it is possible to request asynchronous notification of changes in the state of an audio device.  

    ERRORS

    audiohd errors are described in the audio(7I) man page.  

    FILES

    /dev/audio


     Symbolic link to the system's primary audio device. (Not necessarily an audiohd audio device).

    /dev/audioctl

    Control device for the primary audio device.

    /dev/sound/0

    Represents the first audio device on the system. (Not necessarily an audiohd audio device).

    /dev/sound/0ctl

    Audio control for /dev/sound/0.

    /usr/share/audio/samples

    Audio sample files.

    /kernel/drv/audiohd.conf

    audiohd driver configuration file.

     

    ATTRIBUTES

    See attributes(5) for a descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    ArchitecturePC-based system

    Availability

    Stability level

     

    SEE ALSO

    mixerctl(1), sdtaudiocontrol(1), ioctl(2), attributes(5), audio(7I), mixer(7I), streamio(7I)

    Intel High-Definition Audio Specification 1.0. - Intel Corporation

    ALC880 Specification --- Realtek Inc.

    http://www.sun.com/io  

    DIAGNOSTICS

    In addition to being logged, the following messages may appear on the system console:

    init_state() play interrupt rate set too low

    The play interrupt rate in audiohd.conf is set too low. It has been reset to the rate specified in the message. Updateaudiohd.conf to a higher play interrupt rate.

    init_state() play interrupt rate set too high

    The play interrupt rate set in audio810.conf is set too high. It has been reset to the rate specified in the message. Updateaudiohd.conf to a lower play interrupt rate.

    init_state() record interrupt rate set too low

    The record interrupt rate inaudiohd.conf is set too low. It has been reset to the rate specified in the message. Update audio810.conf to a higher record interrupt rate.

    init_state() record interrupt rate set too high

    The record interrupt rate in audiohd.conf is set too high. It has been reset to the rate specified in the message. Updateaudiohd.conf to a lower record interrupt rate.


     

    Index

    NAME
    DESCRIPTION
    API
    Driver Versions
    Audio Mixer Mode
    Audio Data Formats
    Sample Granularity
    Interrupt Rate
    Audio Status Change Notification
    ERRORS
    FILES
    ATTRIBUTES
    SEE ALSO
    DIAGNOSTICS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру