The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

bus_space_set_multi_stream_4 (9)
  • >> bus_space_set_multi_stream_4 (9) ( FreeBSD man: Ядро )

  • BSD mandoc
     

    NAME

    
    
    bus_space
    
     
    bus_space_barrier
    
     
    bus_space_copy_region_1
    
     
    bus_space_copy_region_2
    
     
    bus_space_copy_region_4
    
     
    bus_space_copy_region_8
    
     
    bus_space_copy_region_stream_1
    
     
    bus_space_copy_region_stream_2
    
     
    bus_space_copy_region_stream_4
    
     
    bus_space_copy_region_stream_8
    
     
    bus_space_free
    
     
    bus_space_map
    
     
    bus_space_read_1
    
     
    bus_space_read_2
    
     
    bus_space_read_4
    
     
    bus_space_read_8
    
     
    bus_space_read_multi_1
    
     
    bus_space_read_multi_2
    
     
    bus_space_read_multi_4
    
     
    bus_space_read_multi_8
    
     
    bus_space_read_multi_stream_1
    
     
    bus_space_read_multi_stream_2
    
     
    bus_space_read_multi_stream_4
    
     
    bus_space_read_multi_stream_8
    
     
    bus_space_read_region_1
    
     
    bus_space_read_region_2
    
     
    bus_space_read_region_4
    
     
    bus_space_read_region_8
    
     
    bus_space_read_region_stream_1
    
     
    bus_space_read_region_stream_2
    
     
    bus_space_read_region_stream_4
    
     
    bus_space_read_region_stream_8
    
     
    bus_space_read_stream_1
    
     
    bus_space_read_stream_2
    
     
    bus_space_read_stream_4
    
     
    bus_space_read_stream_8
    
     
    bus_space_set_multi_1
    
     
    bus_space_set_multi_2
    
     
    bus_space_set_multi_4
    
     
    bus_space_set_multi_8
    
     
    bus_space_set_multi_stream_1
    
     
    bus_space_set_multi_stream_2
    
     
    bus_space_set_multi_stream_4
    
     
    bus_space_set_multi_stream_8
    
     
    bus_space_set_region_1
    
     
    bus_space_set_region_2
    
     
    bus_space_set_region_4
    
     
    bus_space_set_region_8
    
     
    bus_space_set_region_stream_1
    
     
    bus_space_set_region_stream_2
    
     
    bus_space_set_region_stream_4
    
     
    bus_space_set_region_stream_8
    
     
    bus_space_subregion
    
     
    bus_space_unmap
    
     
    bus_space_write_1
    
     
    bus_space_write_2
    
     
    bus_space_write_4
    
     
    bus_space_write_8
    
     
    bus_space_write_multi_1
    
     
    bus_space_write_multi_2
    
     
    bus_space_write_multi_4
    
     
    bus_space_write_multi_8
    
     
    bus_space_write_multi_stream_1
    
     
    bus_space_write_multi_stream_2
    
     
    bus_space_write_multi_stream_4
    
     
    bus_space_write_multi_stream_8
    
     
    bus_space_write_region_1
    
     
    bus_space_write_region_2
    
     
    bus_space_write_region_4
    
     
    bus_space_write_region_8
    
     
    bus_space_write_region_stream_1
    
     
    bus_space_write_region_stream_2
    
     
    bus_space_write_region_stream_4
    
     
    bus_space_write_region_stream_8
    
     
    bus_space_write_stream_1
    
     
    bus_space_write_stream_2
    
     
    bus_space_write_stream_4
    
     
    bus_space_write_stream_8
    
     - bus space manipulation functions
    
     
    

    SYNOPSIS

       #include <machine/bus.h>
    int Fo bus_space_map Fa bus_space_tag_t space bus_addr_t address Fa bus_size_t size int flags bus_space_handle_t *handlep Fc Ft void Fo bus_space_unmap Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t size Fc Ft int Fo bus_space_subregion Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset bus_size_t size bus_space_handle_t *nhandlep Fc Ft int Fo bus_space_alloc Fa bus_space_tag_t space bus_addr_t reg_start bus_addr_t reg_end Fa bus_size_t size bus_size_t alignment bus_size_t boundary Fa int flags bus_addr_t *addrp bus_space_handle_t *handlep Fc Ft void Fo bus_space_free Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t size Fc Ft u_int8_t Fo bus_space_read_1 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int16_t Fo bus_space_read_2 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int32_t Fo bus_space_read_4 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int64_t Fo bus_space_read_8 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int8_t Fo bus_space_read_stream_1 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int16_t Fo bus_space_read_stream_2 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int32_t Fo bus_space_read_stream_4 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft u_int64_t Fo bus_space_read_stream_8 Fa bus_space_tag_t space bus_space_handle_t handle bus_size_t offset Fc Ft void Fo bus_space_write_1 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int8_t value Fc Ft void Fo bus_space_write_2 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int16_t value Fc Ft void Fo bus_space_write_4 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int32_t value Fc Ft void Fo bus_space_write_8 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int64_t value Fc Ft void Fo bus_space_write_stream_1 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int8_t value Fc Ft void Fo bus_space_write_stream_2 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int16_t value Fc Ft void Fo bus_space_write_stream_4 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int32_t value Fc Ft void Fo bus_space_write_stream_8 Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset u_int64_t value Fc Ft void Fo bus_space_barrier Fa bus_space_tag_t space bus_space_handle_t handle Fa bus_size_t offset bus_size_t length int flags Fc Ft void Fo bus_space_read_region_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_region_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_region_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_copy_region_1 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_2 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_4 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_8 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_copy_region_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t srchandle bus_size_t srcoffset Fa bus_space_handle_t dsthandle bus_size_t dstoffset bus_size_t count Fc Ft void Fo bus_space_set_region_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_region_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t value Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_read_multi_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_write_multi_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t *datap Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_stream_1 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int8_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_stream_2 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int16_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_stream_4 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int32_t value Fa bus_size_t count Fc Ft void Fo bus_space_set_multi_stream_8 Fa bus_space_tag_t space Fa bus_space_handle_t handle bus_size_t offset u_int64_t value Fa bus_size_t count Fc  

    DESCRIPTION

    The functions exist to allow device drivers machine-independent access to bus memory and register areas. All of the functions and types described in this document can be used by including the    #include <machine/bus.h>
    header file.

    Many common devices are used on multiple architectures, but are accessed differently on each because of architectural constraints. For instance, a device which is mapped in one system's I/O space may be mapped in memory space on a second system. On a third system, architectural limitations might change the way registers need to be accessed (e.g. creating a non-linear register space). In some cases, a single driver may need to access the same type of device in multiple ways in a single system or architecture. The goal of the functions is to allow a single driver source file to manipulate a set of devices on different system architectures, and to allow a single driver object file to manipulate a set of devices on multiple bus types on a single architecture.

    Not all busses have to implement all functions described in this document, though that is encouraged if the operations are logically supported by the bus. Unimplemented functions should cause compile-time errors if possible.

    All of the interface definitions described in this document are shown as function prototypes and discussed as if they were required to be functions. Implementations are encouraged to implement prototyped (type-checked) versions of these interfaces, but may implement them as macros if appropriate. Machine-dependent types, variables, and functions should be marked clearly in    #include <machine/bus.h>
    to avoid confusion with the machine-independent types and functions, and, if possible, should be given names which make the machine-dependence clear.  

    CONCEPTS AND GUIDELINES

    Bus spaces are described by bus space tags, which can be created only by machine-dependent code. A given machine may have several different types of bus space (e.g. memory space and I/O space), and thus may provide multiple different bus space tags. Individual busses or devices on a machine may use more than one bus space tag. For instance, ISA devices are given an ISA memory space tag and an ISA I/O space tag. Architectures may have several different tags which represent the same type of space, for instance because of multiple different host bus interface chipsets.

    A range in bus space is described by a bus address and a bus size. The bus address describes the start of the range in bus space. The bus size describes the size of the range in bytes. Busses which are not byte addressable may require use of bus space ranges with appropriately aligned addresses and properly rounded sizes.

    Access to regions of bus space is facilitated by use of bus space handles, which are usually created by mapping a specific range of a bus space. Handles may also be created by allocating and mapping a range of bus space, the actual location of which is picked by the implementation within bounds specified by the caller of the allocation function.

    All of the bus space access functions require one bus space tag argument, at least one handle argument, and at least one offset argument (a bus size). The bus space tag specifies the space, each handle specifies a region in the space, and each offset specifies the offset into the region of the actual location(s) to be accessed. Offsets are given in bytes, though busses may impose alignment constraints. The offset used to access data relative to a given handle must be such that all of the data being accessed is in the mapped region that the handle describes. Trying to access data outside that region is an error.

    Because some architectures' memory systems use buffering to improve memory and device access performance, there is a mechanism which can be used to create ``barriers'' in the bus space read and write stream. There are three types of barriers: read, write, and read/write. All reads started to the region before a read barrier must complete before any reads after the read barrier are started. (The analogous requirement is true for write barriers.) Read/write barriers force all reads and writes started before the barrier to complete before any reads or writes after the barrier are started. Correctly-written drivers will include all appropriate barriers, and assume only the read/write ordering imposed by the barrier operations.

    People trying to write portable drivers with the functions should try to make minimal assumptions about what the system allows. In particular, they should expect that the system requires bus space addresses being accessed to be naturally aligned (i.e., base address of handle added to offset is a multiple of the access size), and that the system does alignment checking on pointers (i.e., pointer to objects being read and written must point to properly-aligned data).

    The descriptions of the functions given below all assume that they are called with proper arguments. If called with invalid arguments or arguments that are out of range (e.g. trying to access data outside of the region mapped when a given handle was created), undefined behaviour results. In that case, they may cause the system to halt, either intentionally (via panic) or unintentionally (by causing a fatal trap of by some other means) or may cause improper operation which is not immediately fatal. Functions which return void or which return data read from bus space (i.e., functions which do not obviously return an error code) do not fail. They could only fail if given invalid arguments, and in that case their behaviour is undefined.  

    TYPES

    Several types are defined in    #include <machine/bus.h>
    to facilitate use of the functions by drivers.  

    Vt bus_addr_t

    The Vt bus_addr_t type is used to describe bus addresses. It must be an unsigned integral type capable of holding the largest bus address usable by the architecture. This type is primarily used when mapping and unmapping bus space.  

    Vt bus_size_t

    The Vt bus_size_t type is used to describe sizes of ranges in bus space. It must be an unsigned integral type capable of holding the size of the largest bus address range usable on the architecture. This type is used by virtually all of the functions, describing sizes when mapping regions and offsets into regions when performing space access operations.  

    Vt bus_space_tag_t

    The Vt bus_space_tag_t type is used to describe a particular bus space on a machine. Its contents are machine-dependent and should be considered opaque by machine-independent code. This type is used by all functions to name the space on which they are operating.  

    Vt bus_space_handle_t

    The Vt bus_space_handle_t type is used to describe a mapping of a range of bus space. Its contents are machine-dependent and should be considered opaque by machine-independent code. This type is used when performing bus space access operations.  

    MAPPING AND UNMAPPING BUS SPACE

    This section is specific to the Nx version of these functions and may or may not apply to the Fx version.

    Bus space must be mapped before it can be used, and should be unmapped when it is no longer needed. The bus_space_map ();
    and bus_space_unmap ();
    functions provide these capabilities.

    Some drivers need to be able to pass a subregion of already-mapped bus space to another driver or module within a driver. The bus_space_subregion ();
    function allows such subregions to be created.  

    Fn bus_space_map space address size flags handlep

    The bus_space_map ();
    function maps the region of bus space named by the Fa space , address , and Fa size arguments. If successful, it returns zero and fills in the bus space handle pointed to by Fa handlep with the handle that can be used to access the mapped region. If unsuccessful, it will return non-zero and leave the bus space handle pointed to by Fa handlep in an undefined state.

    The Fa flags argument controls how the space is to be mapped. Supported flags include:

    BUS_SPACE_MAP_CACHEABLE
    Try to map the space so that accesses can be cached and/or prefetched by the system. If this flag is not specified, the implementation should map the space so that it will not be cached or prefetched.

    This flag must have a value of 1 on all implementations for backward compatibility.

    BUS_SPACE_MAP_LINEAR
    Try to map the space so that its contents can be accessed linearly via normal memory access methods (e.g. pointer dereferencing and structure accesses). This is useful when software wants to do direct access to a memory device, e.g. a frame buffer. If this flag is specified and linear mapping is not possible, the bus_space_map ();
    call should fail. If this flag is not specified, the system may map the space in whatever way is most convenient.

    Not all combinations of flags make sense or are supported with all spaces. For instance, BUS_SPACE_MAP_CACHEABLE may be meaningless when used on many systems' I/O port spaces, and on some systems BUS_SPACE_MAP_LINEAR without BUS_SPACE_MAP_CACHEABLE may never work. When the system hardware or firmware provides hints as to how spaces should be mapped (e.g. the PCI memory mapping registers' ``prefetchable'' bit), those hints should be followed for maximum compatibility. On some systems, requesting a mapping that cannot be satisfied (e.g. requesting a non-cacheable mapping when the system can only provide a cacheable one) will cause the request to fail.

    Some implementations may keep track of use of bus space for some or all bus spaces and refuse to allow duplicate allocations. This is encouraged for bus spaces which have no notion of slot-specific space addressing, such as ISA and VME, and for spaces which coexist with those spaces (e.g. EISA and PCI memory and I/O spaces co-existing with ISA memory and I/O spaces).

    Mapped regions may contain areas for which there is no device on the bus. If space in those areas is accessed, the results are bus-dependent.  

    Fn bus_space_unmap space handle size

    The bus_space_unmap ();
    function unmaps a region of bus space mapped with bus_space_map (.);
    When unmapping a region, the Fa size specified should be the same as the size given to bus_space_map ();
    when mapping that region.

    After bus_space_unmap ();
    is called on a handle, that handle is no longer valid. (If copies were made of the handle they are no longer valid, either.)

    This function will never fail. If it would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, bus_space_unmap ();
    will never return.  

    Fn bus_space_subregion space handle offset size nhandlep

    The bus_space_subregion ();
    function is a convenience function which makes a new handle to some subregion of an already-mapped region of bus space. The subregion described by the new handle starts at byte offset Fa offset into the region described by Fa handle , with the size give by Fa size , and must be wholly contained within the original region.

    If successful, bus_space_subregion ();
    returns zero and fills in the bus space handle pointed to by Fa nhandlep . If unsuccessful, it returns non-zero and leaves the bus space handle pointed to by Fa nhandlep in an undefined state. In either case, the handle described by Fa handle remains valid and is unmodified.

    When done with a handle created by bus_space_subregion (,);
    the handle should be thrown away. Under no circumstances should bus_space_unmap ();
    be used on the handle. Doing so may confuse any resource management being done on the space, and will result in undefined behaviour. When bus_space_unmap ();
    or bus_space_free ();
    is called on a handle, all subregions of that handle become invalid.  

    ALLOCATING AND FREEING BUS SPACE

    This section is specific to the Nx version of these functions and may or may not apply to the Fx version.

    Some devices require or allow bus space to be allocated by the operating system for device use. When the devices no longer need the space, the operating system should free it for use by other devices. The bus_space_alloc ();
    and bus_space_free ();
    functions provide these capabilities.  

    Fn bus_space_alloc space reg_start reg_end size alignment boundary

    flags addrp handlep The bus_space_alloc ();
    function allocates and maps a region of bus space with the size given by Fa size , corresponding to the given constraints. If successful, it returns zero, fills in the bus address pointed to by Fa addrp with the bus space address of the allocated region, and fills in the bus space handle pointed to by Fa handlep with the handle that can be used to access that region. If unsuccessful, it returns non-zero and leaves the bus address pointed to by Fa addrp and the bus space handle pointed to by Fa handlep in an undefined state.

    Constraints on the allocation are given by the Fa reg_start , reg_end , alignment , and Fa boundary parameters. The allocated region will start at or after Fa reg_start and end before or at Fa reg_end . The Fa alignment constraint must be a power of two, and the allocated region will start at an address that is an even multiple of that power of two. The Fa boundary constraint, if non-zero, ensures that the region is allocated so that Fa first address in region / Fa boundary has the same value as Fa last address in region / Fa boundary . If the constraints cannot be met, bus_space_alloc ();
    will fail. It is an error to specify a set of constraints that can never be met (for example, Fa size greater than Fa boundary ) .

    The Fa flags parameter is the same as the like-named parameter to bus_space_map (,);
    the same flag values should be used, and they have the same meanings.

    Handles created by bus_space_alloc ();
    should only be freed with bus_space_free (.);
    Trying to use bus_space_unmap ();
    on them causes undefined behaviour. The bus_space_subregion ();
    function can be used on handles created by bus_space_alloc (.);
     

    Fn bus_space_free space handle size

    The bus_space_free ();
    function unmaps and frees a region of bus space mapped and allocated with bus_space_alloc (.);
    When unmapping a region, the Fa size specified should be the same as the size given to bus_space_alloc ();
    when allocating the region.

    After bus_space_free ();
    is called on a handle, that handle is no longer valid. (If copies were made of the handle, they are no longer valid, either.)

    This function will never fail. If it would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, bus_space_free ();
    will never return.  

    READING AND WRITING SINGLE DATA ITEMS

    The simplest way to access bus space is to read or write a single data item. The bus_space_read_N ();
    and bus_space_write_N ();
    families of functions provide the ability to read and write 1, 2, 4, and 8 byte data items on busses which support those access sizes.  

    Fn bus_space_read_1 space handle offset

     

    Fn bus_space_read_2 space handle offset

     

    Fn bus_space_read_4 space handle offset

     

    Fn bus_space_read_8 space handle offset

    The bus_space_read_N ();
    family of functions reads a 1, 2, 4, or 8 byte data item from the offset specified by Fa offset into the region specified by Fa handle of the bus space specified by Fa space . The location being read must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data item being read. On some systems, not obeying this requirement may cause incorrect data to be read, on others it may cause a system crash.

    Read operations done by the bus_space_read_N ();
    functions may be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    Fn bus_space_write_1 space handle offset value

     

    Fn bus_space_write_2 space handle offset value

     

    Fn bus_space_write_4 space handle offset value

     

    Fn bus_space_write_8 space handle offset value

    The bus_space_write_N ();
    family of functions writes a 1, 2, 4, or 8 byte data item to the offset specified by Fa offset into the region specified by Fa handle of the bus space specified by Fa space . The location being written must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data item being written. On some systems, not obeying this requirement may cause incorrect data to be written, on others it may cause a system crash.

    Write operations done by the bus_space_write_N ();
    functions may be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    BARRIERS

    In order to allow high-performance buffering implementations to avoid bus activity on every operation, read and write ordering should be specified explicitly by drivers when necessary. The bus_space_barrier ();
    function provides that ability.  

    Fn bus_space_barrier space handle offset length flags

    The bus_space_barrier ();
    function enforces ordering of bus space read and write operations for the specified subregion (described by the Fa offset and Fa length parameters) of the region named by Fa handle in the space named by Fa space .

    The Fa flags argument controls what types of operations are to be ordered. Supported flags are:

    BUS_SPACE_BARRIER_READ
    Synchronize read operations.
    BUS_SPACE_BARRIER_WRITE
    Synchronize write operations.

    Those flags can be combined (or-ed together) to enforce ordering on both read and write operations.

    All of the specified type(s) of operation which are done to the region before the barrier operation are guaranteed to complete before any of the specified type(s) of operation done after the barrier.

    Example: Consider a hypothetical device with two single-byte ports, one write-only input port (at offset 0) and a read-only output port (at offset 1). Operation of the device is as follows: data bytes are written to the input port, and are placed by the device on a stack, the top of which is read by reading from the output port. The sequence to correctly write two data bytes to the device then read those two data bytes back would be:

    /*
     * t and h are the tag and handle for the mapped device's
     * space.
     */
    bus_space_write_1(t, h, 0, data0);
    bus_space_barrier(t, h, 0, 1, BUS_SPACE_BARRIER_WRITE);  /* 1 */
    bus_space_write_1(t, h, 0, data1);
    bus_space_barrier(t, h, 0, 2,
        BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE);     /* 2 */
    ndata1 = bus_space_read_1(t, h, 1);
    bus_space_barrier(t, h, 1, 1, BUS_SPACE_BARRIER_READ);   /* 3 */
    ndata0 = bus_space_read_1(t, h, 1);
    /* data0 == ndata0, data1 == ndata1 */
    

    The first barrier makes sure that the first write finishes before the second write is issued, so that two writes to the input port are done in order and are not collapsed into a single write. This ensures that the data bytes are written to the device correctly and in order.

    The second barrier makes sure that the writes to the output port finish before any of the reads to the input port are issued, thereby making sure that all of the writes are finished before data is read. This ensures that the first byte read from the device really is the last one that was written.

    The third barrier makes sure that the first read finishes before the second read is issued, ensuring that data is read correctly and in order.

    The barriers in the example above are specified to cover the absolute minimum number of bus space locations. It is correct (and often easier) to make barrier operations cover the device's whole range of bus space, that is, to specify an offset of zero and the size of the whole region.  

    REGION OPERATIONS

    Some devices use buffers which are mapped as regions in bus space. Often, drivers want to copy the contents of those buffers to or from memory, e.g. into mbufs which can be passed to higher levels of the system or from mbufs to be output to a network. In order to allow drivers to do this as efficiently as possible, the bus_space_read_region_N ();
    and bus_space_write_region_N ();
    families of functions are provided.

    Drivers occasionally need to copy one region of a bus space to another, or to set all locations in a region of bus space to contain a single value. The bus_space_copy_region_N ();
    family of functions and the bus_space_set_region_N ();
    family of functions allow drivers to perform these operations.  

    Fn bus_space_read_region_1 space handle offset datap count

     

    Fn bus_space_read_region_2 space handle offset datap count

     

    Fn bus_space_read_region_4 space handle offset datap count

     

    Fn bus_space_read_region_8 space handle offset datap count

    The bus_space_read_region_N ();
    family of functions reads Fa count 1, 2, 4, or 8 byte data items from bus space starting at byte offset Fa offset in the region specified by Fa handle of the bus space specified by Fa space and writes them into the array specified by Fa datap . Each successive data item is read from an offset 1, 2, 4, or 8 bytes after the previous data item (depending on which function is used). All locations being read must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data items being read and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be read, on others it may cause a system crash.

    Read operations done by the bus_space_read_region_N ();
    functions may be executed in any order. They may also be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function. There is no way to insert barriers between reads of individual bus space locations executed by the bus_space_read_region_N ();
    functions.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    Fn bus_space_write_region_1 space handle offset datap count

     

    Fn bus_space_write_region_2 space handle offset datap count

     

    Fn bus_space_write_region_4 space handle offset datap count

     

    Fn bus_space_write_region_8 space handle offset datap count

    The bus_space_write_region_N ();
    family of functions reads Fa count 1, 2, 4, or 8 byte data items from the array specified by Fa datap and writes them to bus space starting at byte offset Fa offset in the region specified by Fa handle of the bus space specified by Fa space . Each successive data item is written to an offset 1, 2, 4, or 8 bytes after the previous data item (depending on which function is used). All locations being written must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data items being written and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be written, on others it may cause a system crash.

    Write operations done by the bus_space_write_region_N ();
    functions may be executed in any order. They may also be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function. There is no way to insert barriers between writes of individual bus space locations executed by the bus_space_write_region_N ();
    functions.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    Fn bus_space_copy_region_1 space srchandle srcoffset dsthandle

    dstoffset count  

    Fn bus_space_copy_region_2 space srchandle srcoffset dsthandle

    dstoffset count  

    Fn bus_space_copy_region_4 space srchandle srcoffset dsthandle

    dstoffset count  

    Fn bus_space_copy_region_8 space srchandle srcoffset dsthandle

    dstoffset count The bus_space_copy_region_N ();
    family of functions copies Fa count 1, 2, 4, or 8 byte data items in bus space from the area starting at byte offset Fa srcoffset in the region specified by Fa srchandle of the bus space specified by Fa space to the area starting at byte offset Fa dstoffset in the region specified by Fa dsthandle in the same bus space. Each successive data item read or written has an offset 1, 2, 4, or 8 bytes after the previous data item (depending on which function is used). All locations being read and written must lie within the bus space region specified by their respective handles.

    For portability, the starting addresses of the regions specified by the each handle plus its respective offset should be a multiple of the size of data items being copied. On some systems, not obeying this requirement may cause incorrect data to be copied, on others it may cause a system crash.

    Read and write operations done by the bus_space_copy_region_N ();
    functions may be executed in any order. They may also be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier (function .);
    There is no way to insert barriers between reads or writes of individual bus space locations executed by the bus_space_copy_region_N ();
    functions.

    Overlapping copies between different subregions of a single region of bus space are handled correctly by the bus_space_copy_region_N ();
    functions.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    Fn bus_space_set_region_1 space handle offset value count

     

    Fn bus_space_set_region_2 space handle offset value count

     

    Fn bus_space_set_region_4 space handle offset value count

     

    Fn bus_space_set_region_8 space handle offset value count

    The bus_space_set_region_N ();
    family of functions writes the given Fa value to Fa count 1, 2, 4, or 8 byte data items in bus space starting at byte offset Fa offset in the region specified by Fa handle of the bus space specified by Fa space . Each successive data item has an offset 1, 2, 4, or 8 bytes after the previous data item (depending on which function is used). All locations being written must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data items being written. On some systems, not obeying this requirement may cause incorrect data to be written, on others it may cause a system crash.

    Write operations done by the bus_space_set_region_N ();
    functions may be executed in any order. They may also be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function. There is no way to insert barriers between writes of individual bus space locations executed by the bus_space_set_region_N ();
    functions.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    READING AND WRITING A SINGLE LOCATION MULTIPLE TIMES

    Some devices implement single locations in bus space which are to be read or written multiple times to communicate data, e.g. some ethernet devices' packet buffer FIFOs. In order to allow drivers to manipulate these types of devices as efficiently as possible, the bus_space_read_multi_N (,);
    bus_space_set_multi_N (,);
    and bus_space_write_multi_N ();
    families of functions are provided.  

    Fn bus_space_read_multi_1 space handle offset datap count

     

    Fn bus_space_read_multi_2 space handle offset datap count

     

    Fn bus_space_read_multi_4 space handle offset datap count

     

    Fn bus_space_read_multi_8 space handle offset datap count

    The bus_space_read_multi_N ();
    family of functions reads Fa count 1, 2, 4, or 8 byte data items from bus space at byte offset Fa offset in the region specified by Fa handle of the bus space specified by Fa space and writes them into the array specified by Fa datap . Each successive data item is read from the same location in bus space. The location being read must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data items being read and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be read, on others it may cause a system crash.

    Read operations done by the bus_space_read_multi_N ();
    functions may be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function. Because the bus_space_read_multi_N ();
    functions read the same bus space location multiple times, they place an implicit read barrier between each successive read of that bus space location.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    Fn bus_space_write_multi_1 space handle offset datap count

     

    Fn bus_space_write_multi_2 space handle offset datap count

     

    Fn bus_space_write_multi_4 space handle offset datap count

     

    Fn bus_space_write_multi_8 space handle offset datap count

    The bus_space_write_multi_N ();
    family of functions reads Fa count 1, 2, 4, or 8 byte data items from the array specified by Fa datap and writes them into bus space at byte offset Fa offset in the region specified by Fa handle of the bus space specified by Fa space . Each successive data item is written to the same location in bus space. The location being written must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data items being written and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be written, on others it may cause a system crash.

    Write operations done by the bus_space_write_multi_N ();
    functions may be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function. Because the bus_space_write_multi_N ();
    functions write the same bus space location multiple times, they place an implicit write barrier between each successive write of that bus space location.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    Fn bus_space_set_multi_1 space handle offset value count

     

    Fn bus_space_set_multi_2 space handle offset value count

     

    Fn bus_space_set_multi_4 space handle offset value count

     

    Fn bus_space_set_multi_8 space handle offset value count

    The bus_space_set_multi_N ();
    writes Fa value into bus space at byte offset Fa offset in the region specified by Fa handle of the bus space specified by Fa space , Fa count times. The location being written must lie within the bus space region specified by Fa handle .

    For portability, the starting address of the region specified by Fa handle plus the offset should be a multiple of the size of data items being written and the data array pointer should be properly aligned. On some systems, not obeying these requirements may cause incorrect data to be written, on others it may cause a system crash.

    Write operations done by the bus_space_set_multi_N ();
    functions may be executed out of order with respect to other pending read and write operations unless order is enforced by use of the bus_space_barrier ();
    function. Because the bus_space_set_multi_N ();
    functions write the same bus space location multiple times, they place an implicit write barrier between each successive write of that bus space location.

    These functions will never fail. If they would fail (e.g. because of an argument error), that indicates a software bug which should cause a panic. In that case, they will never return.  

    STREAM FUNCTIONS

    Most of the functions imply a host byte-order and a bus byte-order and take care of any translation for the caller. In some cases, however, hardware may map a FIFO or some other memory region for which the caller may want to use multi-word, yet untranslated access. Access to these types of memory regions should be with the bus_space_ (*_stream_N);
    functions.

    Fn bus_space_read_stream_1
    Fn bus_space_read_stream_2
    Fn bus_space_read_stream_4
    Fn bus_space_read_stream_8
    Fn bus_space_read_multi_stream_1
    Fn bus_space_read_multi_stream_2
    Fn bus_space_read_multi_stream_4
    Fn bus_space_read_multi_stream_8
    Fn bus_space_read_region_stream_1
    Fn bus_space_read_region_stream_2
    Fn bus_space_read_region_stream_4
    Fn bus_space_read_region_stream_8
    Fn bus_space_write_stream_1
    Fn bus_space_write_stream_2
    Fn bus_space_write_stream_4
    Fn bus_space_write_stream_8
    Fn bus_space_write_multi_stream_1
    Fn bus_space_write_multi_stream_2
    Fn bus_space_write_multi_stream_4
    Fn bus_space_write_multi_stream_8
    Fn bus_space_write_region_stream_1
    Fn bus_space_write_region_stream_2
    Fn bus_space_write_region_stream_4
    Fn bus_space_write_region_stream_8
    Fn bus_space_copy_region_stream_1
    Fn bus_space_copy_region_stream_2
    Fn bus_space_copy_region_stream_4
    Fn bus_space_copy_region_stream_8
    Fn bus_space_set_multi_stream_1
    Fn bus_space_set_multi_stream_2
    Fn bus_space_set_multi_stream_4
    Fn bus_space_set_multi_stream_8
    Fn bus_space_set_region_stream_1
    Fn bus_space_set_region_stream_2
    Fn bus_space_set_region_stream_4
    Fn bus_space_set_region_stream_8

    These functions are defined just as their non-stream counterparts, except that they provide no byte-order translation.  

    COMPATIBILITY

    The current Nx version of the interface specification differs slightly from the original specification that came into wide use and Fx adopted. A few of the function names and arguments have changed for consistency and increased functionality.  

    SEE ALSO

    bus_dma9  

    HISTORY

    The functions were introduced in a different form (memory and I/O spaces were accessed via different sets of functions) in Nx 1.2 . The functions were merged to work on generic ``spaces'' early in the Nx 1.3 development cycle, and many drivers were converted to use them. This document was written later during the Nx 1.3 development cycle, and the specification was updated to fix some consistency problems and to add some missing functionality.

    The manual page was then adapted to the version of the interface that Fx imported for the CAM SCSI drivers, plus subsequent evolution. The Fx version was imported in Fx 3.0 .  

    AUTHORS

    An -nosplit The interfaces were designed and implemented by the Nx developer community. Primary contributors and implementors were An Chris Demetriou , An Jason Thorpe , and An Charles Hannum , but the rest of the Nx developers and the user community played a significant role in development.

    An Justin Gibbs ported these interfaces to Fx .

    An Chris Demetriou wrote this manual page.

    An Warner Losh modified it for the Fx implementation.  

    BUGS

    This manual may not completely and accurately document the interface, and many parts of the interface are unspecified.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    CONCEPTS AND GUIDELINES
    TYPES
    Vt bus_addr_t
    Vt bus_size_t
    Vt bus_space_tag_t
    Vt bus_space_handle_t
    MAPPING AND UNMAPPING BUS SPACE
    Fn bus_space_map space address size flags handlep
    Fn bus_space_unmap space handle size
    Fn bus_space_subregion space handle offset size nhandlep
    ALLOCATING AND FREEING BUS SPACE
    Fn bus_space_alloc space reg_start reg_end size alignment boundary flags addrp handlep
    Fn bus_space_free space handle size
    READING AND WRITING SINGLE DATA ITEMS
    Fn bus_space_read_1 space handle offset
    Fn bus_space_read_2 space handle offset
    Fn bus_space_read_4 space handle offset
    Fn bus_space_read_8 space handle offset
    Fn bus_space_write_1 space handle offset value
    Fn bus_space_write_2 space handle offset value
    Fn bus_space_write_4 space handle offset value
    Fn bus_space_write_8 space handle offset value
    BARRIERS
    Fn bus_space_barrier space handle offset length flags
    REGION OPERATIONS
    Fn bus_space_read_region_1 space handle offset datap count
    Fn bus_space_read_region_2 space handle offset datap count
    Fn bus_space_read_region_4 space handle offset datap count
    Fn bus_space_read_region_8 space handle offset datap count
    Fn bus_space_write_region_1 space handle offset datap count
    Fn bus_space_write_region_2 space handle offset datap count
    Fn bus_space_write_region_4 space handle offset datap count
    Fn bus_space_write_region_8 space handle offset datap count
    Fn bus_space_copy_region_1 space srchandle srcoffset dsthandle dstoffset count
    Fn bus_space_copy_region_2 space srchandle srcoffset dsthandle dstoffset count
    Fn bus_space_copy_region_4 space srchandle srcoffset dsthandle dstoffset count
    Fn bus_space_copy_region_8 space srchandle srcoffset dsthandle dstoffset count
    Fn bus_space_set_region_1 space handle offset value count
    Fn bus_space_set_region_2 space handle offset value count
    Fn bus_space_set_region_4 space handle offset value count
    Fn bus_space_set_region_8 space handle offset value count
    READING AND WRITING A SINGLE LOCATION MULTIPLE TIMES
    Fn bus_space_read_multi_1 space handle offset datap count
    Fn bus_space_read_multi_2 space handle offset datap count
    Fn bus_space_read_multi_4 space handle offset datap count
    Fn bus_space_read_multi_8 space handle offset datap count
    Fn bus_space_write_multi_1 space handle offset datap count
    Fn bus_space_write_multi_2 space handle offset datap count
    Fn bus_space_write_multi_4 space handle offset datap count
    Fn bus_space_write_multi_8 space handle offset datap count
    Fn bus_space_set_multi_1 space handle offset value count
    Fn bus_space_set_multi_2 space handle offset value count
    Fn bus_space_set_multi_4 space handle offset value count
    Fn bus_space_set_multi_8 space handle offset value count
    STREAM FUNCTIONS
    COMPATIBILITY
    SEE ALSO
    HISTORY
    AUTHORS
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру