The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

clnt_create (3)
  • >> clnt_create (3) ( FreeBSD man: Библиотечные вызовы )
  • clnt_create (3) ( Русские man: Библиотечные вызовы )
  • clnt_create (3) ( Linux man: Библиотечные вызовы )

  • BSD mandoc
     

    NAME

    
    
    rpc_clnt_create
    
     
    clnt_control
    
     
    clnt_create
    
     
    clnt_create_timed
    
     
    clnt_create_vers
    
     
    clnt_create_vers_timed
    
     
    clnt_destroy
    
     
    clnt_dg_create
    
     
    clnt_pcreateerror
    
     
    clnt_raw_create
    
     
    clnt_spcreateerror
    
     
    clnt_tli_create
    
     
    clnt_tp_create
    
     
    clnt_tp_create_timed
    
     
    clnt_vc_create
    
     
    rpc_createerr
    
     - library routines for dealing with creation and manipulation of
    
    Vt CLIENT
    
    handles
     
    

    LIBRARY

    Lb libc
    
     
    

    SYNOPSIS

       #include <rpc/rpc.h>
    bool_t clnt_control (CLIENT *clnt const u_int req char *info);
    CLIENT * clnt_create (const char * host const rpcprog_t prognum const rpcvers_t versnum const char *nettype);
    CLIENT * clnt_create_timed (const char * host const rpcprog_t prognum const rpcvers_t versnum const char *nettype const struct timeval *timeout);
    CLIENT * clnt_create_vers (const char * host const rpcprog_t prognum rpcvers_t *vers_outp const rpcvers_t vers_low const rpcvers_t vers_high const char *nettype);
    CLIENT * clnt_create_vers_timed (const char * host const rpcprog_t prognum rpcvers_t *vers_outp const rpcvers_t vers_low const rpcvers_t vers_high const char *nettype const struct timeval *timeout);
    void clnt_destroy (CLIENT *clnt);
    CLIENT * clnt_dg_create (const int fildes const struct netbuf *svcaddr const rpcprog_t prognum const rpcvers_t versnum const u_int sendsz const u_int recvsz);
    void clnt_pcreateerror (const char *s);
    char * clnt_spcreateerror (const char *s);
    CLIENT * clnt_raw_create (const rpcprog_t prognum const rpcvers_t versnum);
    CLIENT * clnt_tli_create (const int fildes const struct netconfig *netconf struct netbuf *svcaddr const rpcprog_t prognum const rpcvers_t versnum const u_int sendsz const u_int recvsz);
    CLIENT * clnt_tp_create (const char * host const rpcprog_t prognum const rpcvers_t versnum const struct netconfig *netconf);
    CLIENT * clnt_tp_create_timed (const char * host const rpcprog_t prognum const rpcvers_t versnum const struct netconfig *netconf const struct timeval *timeout);
    CLIENT * clnt_vc_create (const int fildes const struct netbuf *svcaddr const rpcprog_t prognum const rpcvers_t versnum u_int sendsz u_int recvsz);
     

    DESCRIPTION

    RPC library routines allow C language programs to make procedure calls on other machines across the network. First a Vt CLIENT handle is created and then the client calls a procedure to send a request to the server. On receipt of the request, the server calls a dispatch routine to perform the requested service, and then sends a reply.  

    Routines

    Fn clnt_control
    A function macro to change or retrieve various information about a client object. The Fa req argument indicates the type of operation, and Fa info is a pointer to the information. For both connectionless and connection-oriented transports, the supported values of Fa req and their argument types and what they do are:

    CLSET_TIMEOUT Ta struct timeval * Ta set total timeout
    CLGET_TIMEOUT Ta struct timeval * Ta get total timeout

    Note: if you set the timeout using clnt_control (,);
    the timeout argument passed by clnt_call ();
    is ignored in all subsequent calls.

    Note: If you set the timeout value to 0, clnt_control ();
    immediately returns an error (RPC_TIMEDOUT ) Set the timeout argument to 0 for batching calls.

    CLGET_SVC_ADDR Ta struct netbuf * Ta get servers address
    CLGET_FD Ta int * Ta get fd from handle
    CLSET_FD_CLOSE Ta void Ta close fd on destroy
    CLSET_FD_NCLOSE Ta void Ta do not close fd on destroy
    CLGET_VERS Ta u_int32_t * Ta get RPC program version
    CLSET_VERS Ta u_int32_t * Ta set RPC program version
    CLGET_XID Ta u_int32_t * Ta get XID of previous call
    CLSET_XID Ta u_int32_t * Ta set XID of next call

    The following operations are valid for connectionless transports only:

    CLSET_RETRY_TIMEOUT Ta struct timeval * Ta set the retry timeout
    CLGET_RETRY_TIMEOUT Ta struct timeval * Ta get the retry timeout
    CLSET_CONNECT Ta Vt int * Ta use connect(2)

    The retry timeout is the time that RPC waits for the server to reply before retransmitting the request. The clnt_control ();
    function returns TRUE on success and FALSE on failure.

    Fn clnt_create
    Generic client creation routine for program Fa prognum and version Fa versnum . The Fa host argument identifies the name of the remote host where the server is located. The Fa nettype argument indicates the class of transport protocol to use. The transports are tried in left to right order in NETPATH environment variable or in top to bottom order in the netconfig database. The clnt_create ();
    function tries all the transports of the Fa nettype class available from the NETPATH environment variable and the netconfig database, and chooses the first successful one. A default timeout is set and can be modified using clnt_control (.);
    This routine returns NULL if it fails. The clnt_pcreateerror ();
    routine can be used to print the reason for failure.

    Note: clnt_create ();
    returns a valid client handle even if the particular version number supplied to clnt_create ();
    is not registered with the rpcbind(8) service. This mismatch will be discovered by a clnt_call ();
    later (see rpc_clnt_calls3).

    Fn clnt_create_timed
    Generic client creation routine which is similar to clnt_create ();
    but which also has the additional argument Fa timeout that specifies the maximum amount of time allowed for each transport class tried. In all other respects, the clnt_create_timed ();
    call behaves exactly like the clnt_create ();
    call.
    Fn clnt_create_vers
    Generic client creation routine which is similar to clnt_create ();
    but which also checks for the version availability. The Fa host argument identifies the name of the remote host where the server is located. The Fa nettype argument indicates the class transport protocols to be used. If the routine is successful it returns a client handle created for the highest version between Fa vers_low and Fa vers_high that is supported by the server. The Fa vers_outp argument is set to this value. That is, after a successful return Fa vers_low <= Fa *vers_outp <= Fa vers_high . If no version between Fa vers_low and Fa vers_high is supported by the server then the routine fails and returns NULL A default timeout is set and can be modified using clnt_control (.);
    This routine returns NULL if it fails. The clnt_pcreateerror ();
    routine can be used to print the reason for failure. Note: clnt_create ();
    returns a valid client handle even if the particular version number supplied to clnt_create ();
    is not registered with the rpcbind(8) service. This mismatch will be discovered by a clnt_call ();
    later (see rpc_clnt_calls3). However, clnt_create_vers ();
    does this for you and returns a valid handle only if a version within the range supplied is supported by the server.
    Fn clnt_create_vers_timed
    Generic client creation routine which is similar to clnt_create_vers ();
    but which also has the additional argument Fa timeout that specifies the maximum amount of time allowed for each transport class tried. In all other respects, the clnt_create_vers_timed ();
    call behaves exactly like the clnt_create_vers ();
    call.
    Fn clnt_destroy
    A function macro that destroys the client's RPC handle. Destruction usually involves deallocation of private data structures, including Fa clnt itself. Use of Fa clnt is undefined after calling clnt_destroy (.);
    If the RPC library opened the associated file descriptor, or CLSET_FD_CLOSE was set using clnt_control (,);
    the file descriptor will be closed. The caller should call auth_destroy (clnt->cl_auth);
    (before calling clnt_destroy ());
    to destroy the associated Vt AUTH structure (see rpc_clnt_auth3).
    Fn clnt_dg_create
    This routine creates an RPC client for the remote program Fa prognum and version Fa versnum ; the client uses a connectionless transport. The remote program is located at address Fa svcaddr . The Fa fildes argument is an open and bound file descriptor. This routine will resend the call message in intervals of 15 seconds until a response is received or until the call times out. The total time for the call to time out is specified by clnt_call ();
    (see clnt_call ();
    in rpc_clnt_calls3). The retry time out and the total time out periods can be changed using clnt_control (.);
    The user may set the size of the send and receive buffers with the Fa sendsz and Fa recvsz arguments; values of 0 choose suitable defaults. This routine returns NULL if it fails.
    Fn clnt_pcreateerror
    Print a message to standard error indicating why a client RPC handle could not be created. The message is prepended with the string Fa s and a colon, and appended with a newline.
    Fn clnt_spcreateerror
    Like clnt_pcreateerror (,);
    except that it returns a string instead of printing to the standard error. A newline is not appended to the message in this case. Warning: returns a pointer to a buffer that is overwritten on each call.
    Fn clnt_raw_create
    This routine creates an RPC client handle for the remote program Fa prognum and version Fa versnum . The transport used to pass messages to the service is a buffer within the process's address space, so the corresponding RPC server should live in the same address space; (see svc_raw_create ();
    in rpc_svc_create3). This allows simulation of RPC and measurement of RPC overheads, such as round trip times, without any kernel or networking interference. This routine returns NULL if it fails. The clnt_raw_create ();
    function should be called after svc_raw_create (.);
    Fn clnt_tli_create
    This routine creates an RPC client handle for the remote program Fa prognum and version Fa versnum . The remote program is located at address Fa svcaddr . If Fa svcaddr is NULL and it is connection-oriented, it is assumed that the file descriptor is connected. For connectionless transports, if Fa svcaddr is NULL RPC_UNKNOWNADDR error is set. The Fa fildes argument is a file descriptor which may be open, bound and connected. If it is RPC_ANYFD it opens a file descriptor on the transport specified by Fa netconf . If Fa fildes is RPC_ANYFD and Fa netconf is NULL a RPC_UNKNOWNPROTO error is set. If Fa fildes is unbound, then it will attempt to bind the descriptor. The user may specify the size of the buffers with the Fa sendsz and Fa recvsz arguments; values of 0 choose suitable defaults. Depending upon the type of the transport (connection-oriented or connectionless), clnt_tli_create ();
    calls appropriate client creation routines. This routine returns NULL if it fails. The clnt_pcreateerror ();
    routine can be used to print the reason for failure. The remote rpcbind service (see rpcbind(8)) is not consulted for the address of the remote service.
    Fn clnt_tp_create
    Like clnt_create ();
    except clnt_tp_create ();
    tries only one transport specified through Fa netconf . The clnt_tp_create ();
    function creates a client handle for the program Fa prognum , the version Fa versnum , and for the transport specified by Fa netconf . Default options are set, which can be changed using clnt_control ();
    calls. The remote rpcbind service on the host Fa host is consulted for the address of the remote service. This routine returns NULL if it fails. The clnt_pcreateerror ();
    routine can be used to print the reason for failure.
    Fn clnt_tp_create_timed
    Like clnt_tp_create ();
    except clnt_tp_create_timed ();
    has the extra argument Fa timeout which specifies the maximum time allowed for the creation attempt to succeed. In all other respects, the clnt_tp_create_timed ();
    call behaves exactly like the clnt_tp_create ();
    call.
    Fn clnt_vc_create
    This routine creates an RPC client for the remote program Fa prognum and version Fa versnum ; the client uses a connection-oriented transport. The remote program is located at address Fa svcaddr . The Fa fildes argument is an open and bound file descriptor. The user may specify the size of the send and receive buffers with the Fa sendsz and Fa recvsz arguments; values of 0 choose suitable defaults. This routine returns NULL if it fails. The address Fa svcaddr should not be NULL and should point to the actual address of the remote program. The clnt_vc_create ();
    function does not consult the remote rpcbind service for this information.
    Vt struct rpc_createerr Va rpc_createerr ;
    A global variable whose value is set by any RPC client handle creation routine that fails. It is used by the routine clnt_pcreateerror ();
    to print the reason for the failure.

     

    SEE ALSO

    rpc(3), rpc_clnt_auth3, rpc_clnt_calls3, rpcbind(8)


     

    Index

    NAME
    LIBRARY
    SYNOPSIS
    DESCRIPTION
    Routines
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру