The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

fd (7)
  • fd (4) ( Solaris man: Специальные файлы /dev/* )
  • fd (4) ( FreeBSD man: Специальные файлы /dev/* )
  • fd (4) ( Русские man: Специальные файлы /dev/* )
  • fd (4) ( Linux man: Специальные файлы /dev/* )
  • >> fd (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    fd, fdc - drivers for floppy disks and floppy disk controllers
     
    

    SYNOPSIS

     

    SPARC

    /dev/diskette0 
    

    /dev/rdiskette0 
    

     

    x86

    /dev/diskette[0-1] 
    

    /dev/rdiskette[0-1] 
    

     

    DESCRIPTION

    The fd and fdc drivers provide the interfaces to floppy disks using the Intel 8272, Intel 82077, NEC 765, or compatible disk controllers on x86 based systems.

    The default partitions for the floppy driver are:

    a

    All cylinders except the last

    b

    Only the last cylinder

    c

    Entire diskette

    The fd driver autosenses the density of the diskette.

    When the floppy is first opened the driver looks for a SunOS label in logical block 0 of the diskette. If attempts to read the SunOS label fail, the open will fail. If block 0 is read successfully but a SunOS label is not found, auto-sensed geometry and default partitioning are assumed.

    The fd driver supports both block and raw interfaces.

    The block files (/dev/diskette*) access the diskette using the system's normal buffering mechanism and may be read and written without regard to physical diskette records.

    There is also a raw (/dev/rdiskette*) interface that provides for direct transmission between the diskette and the user's read or write buffer. A single read(2) or write(2) call usually results in one I/O operation; therefore raw I/O is considerably more efficient when larger blocking factors are used. A blocking factor of no less than 8 Kbytes is recommended. See the Notes section, below, for information on the number of sectors per track.  

    3.5 Diskettes

    For 3.5" double-sided diskettes, the following densities are supported:  

    SPARC

    1.7 Mbyte density

    80 cylinders, 21 sectors per track, 1.7 Mbyte capacity

    high density

    80 cylinders, 18 sectors per track, 1.44 Mbyte capacity

    double density

    80 cylinders, 9 sectors per track, 720 Kbyte capacity

     

    x86

    extended density

    80 cylinders, 36 sectors per track, 2.88 Mbyte capacity

    1.7 Mbyte density

    80 cylinders, 21 sectors per track, 1.7 Mbyte capacity

    high density

    80 cylinders, 18 sectors per track, 1.44 Mbyte capacity

    double density

    80 cylinders, 9 sectors per track, 760 Kbyte capacity

     

    5.25 Diskettes

    For 5.25" double-sided diskettes on x86 platforms, the densities listed below are supported:  

    SPARC

    5.25" diskettes are not supported on SPARC platforms.  

    x86

    high density

    80 cylinders, 15 sectors per track, 1.2 Mbyte capacity

    double density

    40 cylinders, 9 sectors per track, 360 Kbyte capacity

    double density

    40 cylinders, 8 sectors per track, 320 Kbyte capacity

    quad density

    80 cylinders, 9 sectors per track, 720 Kbyte capacity

    double density

    40 cylinders, 16 sectors per track (256 bytes per sector), 320 Kbyte capacity

    double density

    40 cylinders, 4 sectors per track (1024 bytes per sector), 320 Kbyte capacity

     

    ERRORS

    EBUSY

    During opening, the partition has been opened for exclusive access and another process wants to open the partition. Once open, this error is returned if the floppy disk driver attempted to pass a command to the floppy disk controller when the controller was busy handling another command. In this case, the application should try the operation again.

    EFAULT

    An invalid address was specified in an ioctl command (see fdio(7I)).

    EINVAL

    The number of bytes read or written is not a multiple of the diskette's sector size. This error is also returned when an unsupported command is specified using the FDIOCMD ioctl command (see fdio(7I)).

    EIO

    During opening, the diskette does not have a label or there is no diskette in the drive. Once open, this error is returned if the requested I/O transfer could not be completed.

    ENOSPC

    An attempt was made to write past the end of the diskette.

    ENOTTY

    The floppy disk driver does not support the requested ioctl functions (see fdio(7I)).

    ENXIO

    The floppy disk device does not exist or the device is not ready.

    EROFS

    The floppy disk device is opened for write access and the diskette in the drive is write protected.

     

    x86 Only

    ENOSYS

    The floppy disk device does not support the requested ioctl function ( FDEJECT).

     

    X86 CONFIGURATION

    The driver attempts to initialize itself using the information found in the configuration file, /platform/i86pc/kernel/drv/fd.conf.

    name="fd"  parent="fdc"  unit=0;
    name="fd"  parent="fdc"  unit=1; 
    

     

    FILES

     

    SPARC

    /platform/sun4u/kernel/drv/fd

    driver module

    /usr/include/sys/fdreg.h

    structs and definitions for Intel 82072 and 82077 controllers

    /usr/include/sys/fdvar.h

    structs and definitions for floppy drivers

    /dev/diskette

    device file

    /dev/diskette0

    device file

    /dev/rdiskette

    raw device file

    /dev/rdiskette0

    raw device file

     

    For ucb Compatibility

    /dev/fd0[a-c]

    block file

    /dev/rfd0[a-c]

    raw file

    /dev/diskette0

    directory containing volume management character device file

    /dev/rdiskette0

    directory containing the volume management raw character device file

    /dev/aliases/floppy0

    symbolic link to the entry in /dev/rdiskette0

     

    x86

    /platform/i86pc/kernel/drv/fd

    driver module

    /platform/i86pc/kernel/drv/fd.conf

    configuration file for floppy driver

    /platform/i86pc/kernel/drv/fdc

    floppy-controller driver module

    /platform/i86pc/kernel/drv/fdc.conf

    configuration file for the floppy-controller

    /usr/include/sys/fdc.h

    structs and definitions for x86 floppy devices

    /usr/include/sys/fdmedia.h

    structs and definitions for x86 floppy media

     

    x86 First Drive

    /dev/diskette

    device file

    /dev/diskette0

    device file

    /dev/rdiskette

    raw device file

    /dev/rdiskette0

    raw device file

     

    For ucb Compatibility

    /dev/fd0[a-c]

    block file

    /dev/rfd0[a-c]

    raw file

    /dev/diskette0

    directory containing volume management character device file

    /dev/rdiskette0

    directory containing the volume management raw character device file

    /dev/aliases/floppy0

    symbolic link to the entry in /dev/rdiskette0

     

    x86 Second Drive

    /dev/diskette1

    device file

    /dev/rdiskette1

    raw device file

     

    For ucb Compatibility

    /dev/fd1[a-c]

    block file

    /dev/rfd1[a-c]

    raw file

    /dev/diskette1

    directory containing volume management character device file

    /dev/rdiskette1

    directory containing the volume management raw character device file

    /dev/aliases/floppy1

    symbolic link to the entry in /dev/rdiskette1

     

    SEE ALSO

    fdformat(1), dd(1M), drvconfig(1M), read(2), write(2), driver.conf(4), dkio(7I) fdio(7I)  

    DIAGNOSTICS

     

    All Platforms

    fd<n>: <command name> failed (<sr1> <sr2> <sr3>)

    The <command name> failed after several retries on drive <n>. The three hex values in parenthesis are the contents of status register 0, status register 1, and status register 2 of the Intel 8272, the Intel 82072, and the Intel 82077 Floppy Disk Controller on completion of the command, as documented in the data sheet for that part. This error message is usually followed by one of the following, interpreting the bits of the status register:

    fd<n>:

    not writable

    fd<n>:

    crc error blk <block number>

    There was a data error on <block number>.

    fd<n>:

    bad format

    fd<n>:

    timeout

    fd<n>:

    drive not ready

    fd<n>:

    unformatted diskette or no diskette in drive

    fd<n>:

    block <block number> is past the end!

    (nblk=<total number of blocks>)

    The operation tried to access a block number that is greater than the total number of blocks.

    fd<n>:

    b_bcount 0x<op_size> not % 0x<sect_size>

    The size of an operation is not a multiple of the sector size.

    fd<n>:

    overrun/underrun

    fd<n>:

    host bus error. There was a hardware error on a system bus.

     

    SPARC Only

    Overrun/underrun errors occur when accessing a diskette while the system is heavily loaded. Decrease the load on the system and retry the diskette access.  

    NOTES

    3.5" high density diskettes have 18 sectors per track and 5.25" high density diskettes have 15 sectors per track. They can cross a track (though not a cylinder) boundary without losing data, so when using dd(1M) or read(2)/write(2) calls to or from the raw diskette, you should specify bs=18k or multiples thereof for 3.5" diskettes, and bs=15k or multiples thereof for 5.25" diskettes.

    The SPARC fd driver is not an unloadable module.

    Under Solaris (x86 Edition), the configuration of the floppy drives is specified in CMOS configuration memory. Use the BIOS setup program for the system to define the diskette size and density/capacity for each installed drive. Note that MS-DOS may operate the floppy drives correctly, even though the CMOS configuration may be in error. Solaris (x86 Edition) relies on the CMOS configuration to be accurate.


     

    Index

    NAME
    SYNOPSIS
    SPARC
    x86
    DESCRIPTION
    3.5 Diskettes
    SPARC
    x86
    5.25 Diskettes
    SPARC
    x86
    ERRORS
    x86 Only
    X86 CONFIGURATION
    FILES
    SPARC
    For ucb Compatibility
    x86
    x86 First Drive
    For ucb Compatibility
    x86 Second Drive
    For ucb Compatibility
    SEE ALSO
    DIAGNOSTICS
    All Platforms
    SPARC Only
    NOTES


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру