The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

gpt (8)
  • >> gpt (8) ( FreeBSD man: Команды системного администрирования )

  • BSD mandoc
     

    NAME

    gpt
    
     - GUID partition table maintenance utility
    
     
    

    SYNOPSIS

    [general_options ] command [command_options ] device ...  

    DESCRIPTION

    The utility provides the necessary functionality to manipulate GUID partition tables (GPTs), but see Sx BUGS below for how and where functionality is missing. The basic usage model of the tool follows that of the cvs(1) tool. The general options are described in the following paragraph. The remaining paragraphs describe the individual commands with their options. Here we conclude by mentioning that a device is either a special file corresponding to a disk-like device or a regular file. The command is applied to each device listed on the command line.  

    General Options

    The general options allow the user to change default settings or otherwise change the behaviour that is applicable to all commands. Not all commands use all default settings, so some general options may not have an effect on all commands.

    The -p count option allows the user to change the number of partitions the GPT can accomodate. This is used whenever a new GPT is created. By default, the utility will create space for 128 partitions (or 32 sectors of 512 bytes).

    The -r option causes the utility to open the device for reading only. Currently this option is primarily useful for the show command, but the intent is to use it to implement dry-run behaviour.

    The -v option controls the verbosity level. The level increases with every occurrence of this option. There is no formalized definition of the different levels yet.  

    Commands

    add [-b number ] [-i index ] [-s count ] [-t type ] device ...
    The add command allows the user to add a new partition to an existing table. By default, it will create a UFS partition covering the first available block of an unused disk space. The command-specific options can be used to control this behaviour.

    The -b number option allows the user to specify the starting (beginning) sector number of the partition. The minimum sector number is 1, but has to fall inside an unused region of disk space that is covered by the GPT.

    The -i index option allows the user to specify which (free) entry in the GPT table is to be used for the new partition. By default, the first free entry is selected.

    The -s count option allows the user to specify the size of the partition in sectors. The minimum size is 1.

    The -t type option allows the user to specify the partition type. The type is given as an UUID, but accepts boot , efi , swap , ufs , zfs , hfs , linux and windows as aliases for the most commonly used partition types.

    boot [-b pmbr ] [-g gptboot ] [-s count ] device ...
    The boot command allows the user to make a GPT labeled disk bootable via the BIOS bootstrap on i386 and amd64 machines. By default, the /boot/pmbr boot loader is installed into the PMBR and the /boot/gptboot boot loader is installed into the first boot partition. If no boot partition exists and there is available space, a boot partition will be created.

    The -b pmbr option allows the user to specify an alternate path for the PMBR boot loader.

    The -g gptboot option allows the user to specify an alternate path for the GPT boot loader that is installed into the boot partition.

    The -s count option allows the user to specify the size in sectors of the boot partition if one does not already exist. A boot partition must be at least 16 kilobytes. By default, a size of 64 kilobytes is used. Note that the PMBR boot loader will load the entire boot partition into memory. As a result, the boot partition may not exceed 545 kilobytes.

    create [-fp device ... ]
    The create command allows the user to create a new (empty) GPT. By default, one cannot create a GPT when the device contains a MBR, however this can be overridden with the -f option. If the -f option is specified, an existing MBR is destroyed and any partitions described by the MBR are lost.

    The -p option tells to create only the primary table and not the backup table. This option is only useful for debugging and should not be used otherwise.

    destroy [-r device ... ]
    The destroy command allows the user to destroy an existing, possibly not empty GPT.

    The -r option instructs to destroy the table in a way that it can be recovered.

    label [-a ] Aq Fl f Ar file | Fl l Ar label device ...
    label [-b number ] [-i index ] [-s count ] [-t type ] Aq Fl f Ar file | Fl l Ar label device ...
    The label command allows the user to label any partitions that match the selection. At least one of the following selection options must be specified.

    The -a option specifies that all partitions should be labeled. It is mutually exclusive with all other selection options.

    The -b number option selects the partition that starts at the given block number.

    The -i index option selects the partition with the given partition number.

    The -s count option selects all partitions that have the given size. This can cause multiple partitions to be removed.

    The -t type option selects all partitions that have the given type. The type is given as an UUID or by the aliases that the add command accepts. This can cause multiple partitions to be removed.

    The -f file or -l label options specify the new label to be assigned to the selected partitions. The -f file option is used to read the label from the specified file. Only the first line is read from the file and the trailing newline character is stripped. If the file name is the dash or minus sign (- ) the label is read from the standard input. The -l label option is used to specify the label in the command line. The label is assumed to be encoded in UTF-8.

    migrate [-fs device ... ]
    The migrate command allows the user to migrate an MBR-based disk partitioning into a GPT-based partitioning. By default, the MBR is not migrated when it contains partitions of an unknown type. This can be overridden with the -f option. Specifying the -f option will cause unknown partitions to be ignored and any data in it to be lost.

    The -s option prevents migrating BSD disk labels into GPT partitions by creating the GPT equivalent of a slice.

    remove [-a device ... ]
    remove [-b number ] [-i index ] [-s count ] [-t type ] device ...
    The remove command allows the user to remove any and all partitions that match the selection. It uses the same selection options as the label command. See above for a description of these options. Partitions are removed by clearing the partition type. No other information is changed.
    show [-lu device ... ]
    The show command displays the current partitioning on the listed devices and gives an overall view of the disk contents. With the -l option the GPT partition label will be displayed instead of the GPT partition type. The option has no effect on non-GPT partitions. With the -u option the GPT partition type is displayed as an UUID instead of in a user friendly form. The -l option takes precedence over the -u option.

     

    SEE ALSO

    fdisk(8), mount(8), newfs(8), swapon(8)  

    HISTORY

    The utility appeared in Fx 5.0 for ia64.  

    BUGS

    The development of the utility is still work in progress. Many necessary features are missing or partially implemented. In practice this means that the manual page, supposed to describe these features, is farther removed from being complete or useful. As such, missing functionality is not even documented as missing. However, it is believed that the currently present functionality is reliable and stable enough that this tool can be used without bullet-proof footware if one thinks one does not make mistakes.

    It is expected that the basic usage model does not change, but it is possible that future versions will not be compatible in the strictest sense of the word. For example, the -p count option may be changed to a command option rather than a generic option. There are only two commands that use it so there is a chance that the natural tendency for people is to use it as a command option. Also, options primarily intended for diagnostic or debug purposes may be removed in future versions.

    Another possibility is that the current usage model is accompanied by other interfaces to make the tool usable as a back-end. This all depends on demand and thus feedback.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    General Options
    Commands
    SEE ALSO
    HISTORY
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру