The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ixgbe (7)
  • >> ixgbe (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    ixgbe - Intel 10Gb PCI Express NIC Driver
     
    

    SYNOPSIS

    /dev/ixgbe*
    

     

    DESCRIPTION

    The ixgbe Gigabit Ethernet driver is a multi-threaded, loadable, clonable, GLD-based STREAMS driver supporting the Data Link Provider Interface, dlpi(7P), on Intel 82598 10-Gigabit Ethernet controllers.

    The ixgbe driver functions include controller initialization, frame transmit and receive, promiscuous and multicast support, and error recovery and reporting.

    The ixgbe driver and hardware support auto-negotiation, a protocol specified by the IEEE 802.3ae specification.  

    APPLICATION PROGRAMMING INTERFACE

    The cloning character-special device, /dev/ixgbe, is used to access all Intel 82598 10 -Gigabit Ethernet devices installed within the system.

    The ixgbe driver is managed by the dladm(1M) command line utility, which allows VLANs to be defined on top of ixgbe instances and for ixgbe instances to be aggregated. See dladm(1M) for more details.

    You must send an explicit DL_ATTACH_REQ message to associate the opened stream with a particular device (PPA). The PPA ID is interpreted as an unsigned integer data type and indicates the corresponding device instance (unit) number. The driver returns an error (DL_ERROR_ACK) if the PPA field value does not correspond to a valid device instance number for the system. The device is initialized on first attach and de-initialized (stopped) at last detach.

    The values returned by the driver in the DL_INFO_ACK primitive in response to your DL_INFO_REQ are:

    o Maximum SDU is 16366.
    o Minimum SDU is 0.
    o DLSAP address length is 8.
    o MAC type is DL_ETHER.
    o SAP (Service Access Point) length value is -2, meaning the physical address component is followed immediately by a 2-byte SAP component within the DLSAP address.
    o Broadcast address value is the Ethernet/IEEE broadcast address (FF:FF:FF:FF:FF:FF).

    Once in the DL_ATTACHED state, you must send a DL_BIND_REQ to associate a particular SAP with the stream.

     

    CONFIGURATION

    By default, the ixgbe driver performs auto-negotiation to select the link speed and mode. Link speed and mode can only be 10000 Mbps full-duplex. See the IEEE802.3 standard for more information.  

    FILES

    /dev/ixgbe*

    Special character device.

    /kernel/drv/ixgbe

    32-bit device driver (x86).

    /kernel/drv/amd64/ixgbe

    64-bit device driver (x86).

    /kernel/drv/sparcv9/ixgbe

    64-bit device driver (SPARC).

    /kernel/drv/ixgbe.conf

    Configuration file.

     

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE
    AvailabilitySUNWixgbe
    Architecture
    Interface Stability

     

    SEE ALSO

    dladm(1M), netstat(1M), driver.conf(4), attributes(5), streamio(7I), dlpi(7P)

    Writing Device Drivers

    STREAMS Programming Guide

    Network Interfaces Programmer's Guide

    IEEE 802.3ae Specificiation, IEEE - 2002


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    APPLICATION PROGRAMMING INTERFACE
    CONFIGURATION
    FILES
    ATTRIBUTES
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру