The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

newaliases.postfix (1)
  • >> newaliases.postfix (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    sendmail
    -
    Postfix to Sendmail compatibility interface
     
    

    SYNOPSIS

    sendmail [option ...] [recipient ...]
    
    mailq
    sendmail -bp
    
    newaliases
    sendmail -I
    
     

    DESCRIPTION

    The sendmail program implements the Postfix to Sendmail compatibility interface. For the sake of compatibility with existing applications, some Sendmail command-line options are recognized but silently ignored.

    By default, sendmail reads a message from standard input until EOF or until it reads a line with only a . character, and arranges for delivery. sendmail relies on the postdrop(1) command to create a queue file in the maildrop directory.

    Specific command aliases are provided for other common modes of operation:

    mailq
    List the mail queue. Each entry shows the queue file ID, message size, arrival time, sender, and the recipients that still need to be delivered. If mail could not be delivered upon the last attempt, the reason for failure is shown. This mode of operation is implemented by executing the postqueue(1) command.
    newaliases
    Initialize the alias database. If no input file is specified (with the -oA option, see below), the program processes the file(s) specified with the alias_database configuration parameter. If no alias database type is specified, the program uses the type specified with the default_database_type configuration parameter. This mode of operation is implemented by running the postalias(1) command.

    Note: it may take a minute or so before an alias database update becomes visible. Use the postfix reload command to eliminate this delay.

    These and other features can be selected by specifying the appropriate combination of command-line options. Some features are controlled by parameters in the main.cf configuration file.

    The following options are recognized:

    -Am (ignored)
    -Ac (ignored)
    Postfix sendmail uses the same configuration file regardless of whether or not a message is an initial submission.
    -B body_type
    The message body MIME type: 7BIT or 8BITMIME.
    -C config_file (ignored :-)
    The path name of the sendmail.cf file. Postfix configuration files are kept in /etc/postfix.
    -F full_name
    Set the sender full name. This is used only with messages that have no From: message header.
    -G (ignored)
    Gateway (relay) submission, as opposed to initial user submission.
    -I
    Initialize alias database. See the newaliases command above.
    -L label (ignored)
    The logging label. Use the syslog_name configuration parameter instead.
    -N dsn (ignored)
    Delivery status notification control. Currently, Postfix does not implement DSN.
    -R return_limit (ignored)
    Limit the size of bounced mail. Use the bounce_size_limit configuration parameter instead.
    -X log_file (ignored)
    Log mailer traffic. Use the debug_peer_list and debug_peer_level configuration parameters instead.
    -U (ignored)
    Initial user submission.
    -V
    Variable Envelope Return Path. Given an envelope sender address of the form owner-listname@origin, each recipient user@domain receives mail with a personalized envelope sender address.

    By default, the personalized envelope sender address is owner-listname+user=domain@origin. The default + and = characters are configurable with the default_verp_delimiters configuration parameter.

    -Vxy
    As -V, but uses x and y as the VERP delimiter characters, instead of the characters specified with the default_verp_delimiters configuration parameter.
    -bd
    Go into daemon mode. This mode of operation is implemented by executing the postfix start command.
    -bi
    Initialize alias database. See the newaliases command above.
    -bm
    Read mail from standard input and arrange for delivery. This is the default mode of operation.
    -bp
    List the mail queue. See the mailq command above.
    -bs
    Stand-alone SMTP server mode. Read SMTP commands from standard input, and write responses to standard output. In stand-alone SMTP server mode, UCE restrictions and access controls are disabled by default. To enable them, run the process as the mail_owner user.

    This mode of operation is implemented by running the smtpd(8) daemon.

    -f sender
    Set the envelope sender address. This is the address where delivery problems are sent to, unless the message contains an Errors-To: message header.
    -h hop_count (ignored)
    Hop count limit. Use the hopcount_limit configuration parameter instead.
    -i
    When reading a message from standard input, don't treat a line with only a . character as the end of input.
    -m (ignored)
    Backwards compatibility.
    -n (ignored)
    Backwards compatibility.
    -oAalias_database
    Non-default alias database. Specify pathname or type:pathname. See postalias(1) for details.
    -o7 (ignored)
    -o8 (ignored)
    To send 8-bit or binary content, use an appropriate MIME encapsulation and specify the appropriate -B command-line option.
    -oi
    When reading a message from standard input, don't treat a line with only a . character as the end of input.
    -om (ignored)
    The sender is never eliminated from alias etc. expansions.
    -o x value (ignored)
    Set option x to value. Use the equivalent configuration parameter in main.cf instead.
    -r sender
    Set the envelope sender address. This is the address where delivery problems are sent to, unless the message contains an Errors-To: message header.
    -q
    Attempt to deliver all queued mail. This is implemented by executing the postqueue(1) command.
    -qinterval (ignored)
    The interval between queue runs. Use the queue_run_delay configuration parameter instead.
    -qRsite
    Schedule immediate delivery of all mail that is queued for the named site. This option accepts only site names that are eligible for the "fast flush" service, and is implemented by executing the postqueue(1) command. See flush(8) for more information about the "fast flush" service.
    -qSsite
    This command is not implemented. Use the slower sendmail -q command instead.
    -t
    Extract recipients from message headers. This requires that no recipients be specified on the command line.
    -v
    Enable verbose logging for debugging purposes. Multiple -v options make the software increasingly verbose. For compatibility with mailx and other mail submission software, a single -v option produces no output.
     

    SECURITY

    
    
    By design, this program is not set-user (or group) id. However,
    it must handle data from untrusted users or untrusted machines.
    Thus, the usual precautions need to be taken against malicious
    inputs.
     
    

    DIAGNOSTICS

    Problems are logged to syslogd(8) and to the standard error stream.  

    ENVIRONMENT

    
    
    
    MAIL_CONFIG
    Directory with Postfix configuration files.
    MAIL_VERBOSE
    Enable verbose logging for debugging purposes.
    MAIL_DEBUG
    Enable debugging with an external command, as specified with the debugger_command configuration parameter.
     

    FILES

    /var/spool/postfix, mail queue
    /etc/postfix, configuration files
    
     

    CONFIGURATION PARAMETERS

    
    
    See the Postfix main.cf file for syntax details and for
    default values. Use the postfix reload command after a
    configuration change.
    
    alias_database
    Default alias database(s) for newaliases. The default value for this parameter is system-specific.
    bounce_size_limit
    The amount of original message context that is sent along with a non-delivery notification.
    default_database_type
    Default alias etc. database type. On many UNIX systems the default type is either dbm or hash.
    debugger_command
    Command that is executed after a Postfix daemon has initialized.
    debug_peer_level
    Increment in verbose logging level when a remote host matches a pattern in the debug_peer_list parameter.
    debug_peer_list
    List of domain or network patterns. When a remote host matches a pattern, increase the verbose logging level by the amount specified in the debug_peer_level parameter.
    default_verp_delimiters
    The VERP delimiter characters that are used when the -V command line option is specified without delimiter characters.
    fast_flush_domains
    List of domains that will receive "fast flush" service (default: all domains that this system is willing to relay mail to). This list specifies the domains that Postfix accepts in the SMTP ETRN request and in the sendmail -qR command.
    fork_attempts
    Number of attempts to fork() a process before giving up.
    fork_delay
    Delay in seconds between successive fork() attempts.
    hopcount_limit
    Limit the number of Received: message headers.
    mail_owner
    The owner of the mail queue and of most Postfix processes.
    command_directory
    Directory with Postfix support commands.
    daemon_directory
    Directory with Postfix daemon programs.
    queue_directory
    Top-level directory of the Postfix queue. This is also the root directory of Postfix daemons that run chrooted.
    queue_run_delay
    The time between successive scans of the deferred queue.
    verp_delimiter_filter
    The characters that Postfix accepts as VERP delimiter characters.
     

    SEE ALSO

    pickup(8) mail pickup daemon
    postsuper(1) queue maintenance
    postalias(1) maintain alias database
    postdrop(1) mail posting utility
    postfix(1) mail system control
    postqueue(1) mail queue control
    qmgr(8) queue manager
    smtpd(8) SMTP server
    flush(8) fast flush service
    syslogd(8) system logging
    
     

    LICENSE

    
    
    The Secure Mailer license must be distributed with this software.
     
    

    AUTHOR(S)

    Wietse Venema
    IBM T.J. Watson Research
    P.O. Box 704
    Yorktown Heights, NY 10598, USA
    
    

     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    SECURITY
    DIAGNOSTICS
    ENVIRONMENT
    FILES
    CONFIGURATION PARAMETERS
    SEE ALSO
    LICENSE
    AUTHOR(S)


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру