The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

pic (1)
  • pic (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
  • >> pic (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    pic - compile pictures for troff or TeX
     
    

    SYNOPSIS

    pic [ -nvCSU ] [ filename ... ]
    pic -t [ -cvzCSU ] [ filename ... ]  

    DESCRIPTION

    This manual page describes the GNU version of pic, which is part of the groff document formatting system. pic compiles descriptions of pictures embedded within troff or TeX input files into commands that are understood by TeX or troff. Each picture starts with a line beginning with .PS and ends with a line beginning with .PE. Anything outside of .PS and .PE is passed through without change.

    It is the user's responsibility to provide appropriate definitions of the PS and PE macros. When the macro package being used does not supply such definitions (for example, old versions of -ms), appropriate definitions can be obtained with -mpic: these will center each picture.  

    OPTIONS

    Options that do not take arguments may be grouped behind a single -. The special option -- can be used to mark the end of the options. A filename of - refers to the standard input.
    -C
    Recognize .PS and .PE even when followed by a character other than space or newline.
    -S
    Safer mode; do not execute sh commands. This can be useful when operating on untrustworthy input. (enabled by default)
    -U
    Unsafe mode; revert the default option -S.
    -n
    Don't use the groff extensions to the troff drawing commands. You should use this if you are using a postprocessor that doesn't support these extensions. The extensions are described in groff_out(5). The -n option also causes pic not to use zero-length lines to draw dots in troff mode.
    -t
    TeX mode.
    -c
    Be more compatible with tpic. Implies -t. Lines beginning with \ are not passed through transparently. Lines beginning with . are passed through with the initial . changed to \. A line beginning with .ps is given special treatment: it takes an optional integer argument specifying the line thickness (pen size) in milliinches; a missing argument restores the previous line thickness; the default line thickness is 8 milliinches. The line thickness thus specified takes effect only when a non-negative line thickness has not been specified by use of the thickness attribute or by setting the linethick variable.
    -v
    Print the version number.
    -z
    In TeX mode draw dots using zero-length lines.

    The following options supported by other versions of pic are ignored:

    -D
    Draw all lines using the \D escape sequence. pic always does this.
    -T dev
    Generate output for the troff device dev. This is unnecessary because the troff output generated by pic is device-independent.
     

    USAGE

    This section describes only the differences between GNU pic and the original version of pic. Many of these differences also apply to newer versions of Unix pic. A complete documentation is available in the file

    /usr/share/doc/groff/1.18.1.1/pic.ms
     

    TeX mode

    TeX mode is enabled by the -t option. In TeX mode, pic will define a vbox called \graph for each picture. You must yourself print that vbox using, for example, the command

    \centerline{\box\graph}

    Actually, since the vbox has a height of zero this will produce slightly more vertical space above the picture than below it;

    \centerline{\raise 1em\box\graph}

    would avoid this.

    You must use a TeX driver that supports the tpic specials, version 2.

    Lines beginning with \ are passed through transparently; a % is added to the end of the line to avoid unwanted spaces. You can safely use this feature to change fonts or to change the value of \baselineskip. Anything else may well produce undesirable results; use at your own risk. Lines beginning with a period are not given any special treatment.  

    Commands

    for variable = expr1 to expr2 [by [*]expr3] do X body X
    Set variable to expr1. While the value of variable is less than or equal to expr2, do body and increment variable by expr3; if by is not given, increment variable by 1. If expr3 is prefixed by * then variable will instead be multiplied by expr3. X can be any character not occurring in body.
    if expr then X if-true X [else Y if-false Y]
    Evaluate expr; if it is non-zero then do if-true, otherwise do if-false. X can be any character not occurring in if-true. Y can be any character not occurring in if-false.
    print arg...
    Concatenate the arguments and print as a line on stderr. Each arg must be an expression, a position, or text. This is useful for debugging.
    command arg...
    Concatenate the arguments and pass them through as a line to troff or TeX. Each arg must be an expression, a position, or text. This has a similar effect to a line beginning with . or \, but allows the values of variables to be passed through.
    sh X command X
    Pass command to a shell. X can be any character not occurring in command.
    copy "filename"
    Include filename at this point in the file.
    copy ["filename"] thru X body X [until "word"]
    copy ["filename"] thru macro [until "word"]
    This construct does body once for each line of filename; the line is split into blank-delimited words, and occurrences of $i in body, for i between 1 and 9, are replaced by the i-th word of the line. If filename is not given, lines are taken from the current input up to .PE. If an until clause is specified, lines will be read only until a line the first word of which is word; that line will then be discarded. X can be any character not occurring in body. For example,
    .PS
    copy thru % circle at ($1,$2) % until "END"
    1 2
    3 4
    5 6
    END
    box
    .PE
    
    is equivalent to
    .PS
    circle at (1,2)
    circle at (3,4)
    circle at (5,6)
    box
    .PE
    
    The commands to be performed for each line can also be taken from a macro defined earlier by giving the name of the macro as the argument to thru.

    reset

    reset variable1[,] variable2 ...
    Reset pre-defined variables variable1, variable2 ... to their default values. If no arguments are given, reset all pre-defined variables to their default values. Note that assigning a value to scale also causes all pre-defined variables that control dimensions to be reset to their default values times the new value of scale.
    plot expr ["text"]
    This is a text object which is constructed by using text as a format string for sprintf with an argument of expr. If text is omitted a format string of s%gs is used. Attributes can be specified in the same way as for a normal text object. Be very careful that you specify an appropriate format string; pic does only very limited checking of the string. This is deprecated in favour of sprintf.
    variable := expr
    This is similar to = except variable must already be defined, and expr will be assigned to variable without creating a variable local to the current block. (By contrast, = defines the variable in the current block if it is not already defined there, and then changes the value in the current block only.) For example, the following:
    .PS
    x = 3
    y = 3
    [
      x := 5
      y = 5
    ]
    print x " " y
    .PE
    
    prints 5 3.

    Arguments of the form

    X anything X

    are also allowed to be of the form

    anything }

    In this case anything can contain balanced occurrences of { and }. Strings may contain X or imbalanced occurrences of { and }.  

    Expressions

    The syntax for expressions has been significantly extended:

    y (exponentiation)
    sin(x)
    cos(x)
    atan2(y, x)
    log(x) (base 10)
    exp(x) (base 10, ie 10^x)
    sqrt(x)
    int(x)
    rand() (return a random number between 0 and 1)
    rand(x) (return a random number between 1 and x; deprecated)
    srand(x) (set the random number seed)
    max(e1, e2)
    min(e1, e2)
    !e
    e1 && e2
    e1 || e2
    e1 == e2
    e1 != e2
    e1 >= e2
    e1 > e2
    e1 <= e2
    e1 < e2
    "str1" == "str2"
    "str1" != "str2"

    String comparison expressions must be parenthesised in some contexts to avoid ambiguity.  

    Other Changes

    A bare expression, expr, is acceptable as an attribute; it is equivalent to dir expr, where dir is the current direction. For example
    line 2i

    means draw a line 2 inches long in the current direction. The `i' (or `I') character is ignored; to use another measurement unit, set the scale variable to an appropriate value.

    The maximum width and height of the picture are taken from the variables maxpswid and maxpsht. Initially these have values 8.5 and 11.

    Scientific notation is allowed for numbers. For example

    x = 5e-2

    Text attributes can be compounded. For example,

    "foo" above ljust
    is legal.

    There is no limit to the depth to which blocks can be examined. For example,

    [A: [B: [C: box ]]] with .A.B.C.sw at 1,2
    circle at last [].A.B.C
    is acceptable.

    Arcs now have compass points determined by the circle of which the arc is a part.

    Circles and arcs can be dotted or dashed. In TeX mode splines can be dotted or dashed.

    Boxes can have rounded corners. The rad attribute specifies the radius of the quarter-circles at each corner. If no rad or diam attribute is given, a radius of boxrad is used. Initially, boxrad has a value of 0. A box with rounded corners can be dotted or dashed.

    The .PS line can have a second argument specifying a maximum height for the picture. If the width of zero is specified the width will be ignored in computing the scaling factor for the picture. Note that GNU pic will always scale a picture by the same amount vertically as well as horizontally. This is different from the DWB 2.0 pic which may scale a picture by a different amount vertically than horizontally if a height is specified.

    Each text object has an invisible box associated with it. The compass points of a text object are determined by this box. The implicit motion associated with the object is also determined by this box. The dimensions of this box are taken from the width and height attributes; if the width attribute is not supplied then the width will be taken to be textwid; if the height attribute is not supplied then the height will be taken to be the number of text strings associated with the object times textht. Initially textwid and textht have a value of 0.

    In (almost all) places where a quoted text string can be used, an expression of the form

    sprintf(sformats, arg,...)

    can also be used; this will produce the arguments formatted according to format, which should be a string as described in printf(3) appropriate for the number of arguments supplied.

    The thickness of the lines used to draw objects is controlled by the linethick variable. This gives the thickness of lines in points. A negative value means use the default thickness: in TeX output mode, this means use a thickness of 8 milliinches; in TeX output mode with the -c option, this means use the line thickness specified by .ps lines; in troff output mode, this means use a thickness proportional to the pointsize. A zero value means draw the thinnest possible line supported by the output device. Initially it has a value of -1. There is also a thick[ness] attribute. For example,

    circle thickness 1.5

    would draw a circle using a line with a thickness of 1.5 points. The thickness of lines is not affected by the value of the scale variable, nor by the width or height given in the .PS line.

    Boxes (including boxes with rounded corners), circles and ellipses can be filled by giving them an attribute of fill[ed]. This takes an optional argument of an expression with a value between 0 and 1; 0 will fill it with white, 1 with black, values in between with a proportionally gray shade. A value greater than 1 can also be used: this means fill with the shade of gray that is currently being used for text and lines. Normally this will be black, but output devices may provide a mechanism for changing this. Without an argument, then the value of the variable fillval will be used. Initially this has a value of 0.5. The invisible attribute does not affect the filling of objects. Any text associated with a filled object will be added after the object has been filled, so that the text will not be obscured by the filling.

    Three additional modifiers are available to specify colored objects: outline[d] sets the color of the outline, shaded the fill color, and colo[u]r[ed] sets both. All three keywords expect a suffix specifying the color, for example

    circle shaded green outline black

    Currently, color support isn't available in TeX mode. Predefined color names for groff are in the device macro files, for example ps.tmac; additional colors can be defined with the .defcolor request (see the manual page of troff(1) for more details).

    pic assumes that at the beginning of a picture both glyph and fill color are set to the default value.

    Arrow heads will be drawn as solid triangles if the variable arrowhead is non-zero and either TeX mode is enabled or the -n option has not been given. Initially arrowhead has a value of 1. Note that solid arrow heads are always filled with the current outline color.

    The troff output of pic is device-independent. The -T option is therefore redundant. All numbers are taken to be in inches; numbers are never interpreted to be in troff machine units.

    Objects can have an aligned attribute. This will only work if the postprocessor is grops. Any text associated with an object having the aligned attribute will be rotated about the center of the object so that it is aligned in the direction from the start point to the end point of the object. Note that this attribute will have no effect for objects whose start and end points are coincident.

    In places where nth is allowed `expr'th is also allowed. Note that 'th is a single token: no space is allowed between the ' and the th. For example,

    for i = 1 to 4 do {
       line from `i'th box.nw to `i+1'th box.se
    }
    
     

    CONVERSION

    To obtain a stand-alone picture from a pic file, enclose your pic code with .PS and .PE requests; roff configuration commands may be added at the beginning of the file, but no roff text.

    It is necessary to feed this file into groff without adding any page information, so you must check which .PS and .PE requests are actually called. For example, the mm macro package adds a page number, which is very annoying. At the moment, calling standard groff without any macro package works. Alternatively, you can define your own requests, e.g. to do nothing:

    .de PS
    ..
    .de PE
    ..
    

    groff itself does not provide direct conversion into other graphics file formats. But there are lots of possibilities if you first transform your picture into PostScript® format using the groff option -Tps. Since this ps-file lacks BoundingBox information it is not very useful by itself, but it may be fed into other conversion programs, usually named ps2other or pstoother or the like. Moreover, the PostScript interpreter ghostscript (gs) has built-in graphics conversion devices that are called with the option

    gs -sDEVICE=<devname>

    Call

    gs --help

    for a list of the available devices.

    As the Encapsulated PostScript File Format EPS is getting more and more important, and the conversion wasn't regarded trivial in the past you might be interested to know that there is a conversion tool named ps2eps which does the right job. It is much better than the tool ps2epsi packaged with gs.

    For bitmapped graphic formats, you should use pstopnm; the resulting (intermediate) PNM file can be then converted to virtually any graphics format using the tools of the netpbm package .  

    FILES

    u+3n
    /usr/share/groff/1.18.1.1/tmac/pic.tmac Example definitions of the PS and PE macros.
     

    SEE ALSO

    troff(1), groff_out(5), tex(1), gs(1), ps2eps(1), pstopnm(1), ps2epsi(1), pnm(5)

    Tpic: Pic for TeX

    Brian W. Kernighan, PIC --- A Graphics Language for Typesetting (User Manual). AT&T Bell Laboratories, Computing Science Technical Report No. 116 <http://cm.bell-labs.com/cm/cs/cstr/116.ps.gz> (revised May, 1991).

    ps2eps is available from CTAN mirrors, e.g.
    <ftp://ftp.dante.de/tex-archive/support/ps2eps/>

    W. Richard Stevens - Turning PIC Into HTML
    <http://www.kohala.com/start/troff/pic2html.html>

    W. Richard Stevens - Examples of picMacros
    <http://www.kohala.com/start/troff/pic.examples.ps>  

    BUGS

    Input characters that are invalid for groff (ie those with ASCII code 0, or 013 octal, or between 015 and 037 octal, or between 0200 and 0237 octal) are rejected even in TeX mode.

    The interpretation of fillval is incompatible with the pic in 10th edition Unix, which interprets 0 as black and 1 as white.

    PostScript® is a registered trademark of Adobe Systems Incorporation.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    USAGE
    TeX mode
    Commands
    Expressions
    Other Changes
    CONVERSION
    FILES
    SEE ALSO
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру