The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

random (4)
  • random (3) ( Solaris man: Библиотечные вызовы )
  • random (3) ( FreeBSD man: Библиотечные вызовы )
  • random (3) ( Русские man: Библиотечные вызовы )
  • random (3) ( Linux man: Библиотечные вызовы )
  • random (3) ( POSIX man: Библиотечные вызовы )
  • >> random (4) ( FreeBSD man: Специальные файлы /dev/* )
  • random (4) ( Русские man: Специальные файлы /dev/* )
  • random (4) ( Linux man: Специальные файлы /dev/* )
  • random (7) ( Solaris man: Макропакеты и соглашения )
  • random (9) ( FreeBSD man: Ядро )
  • Ключ random обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    random
    
     - the entropy device
    
     
    

    SYNOPSIS

    device random  

    DESCRIPTION

    The device returns an endless supply of random bytes when read. It also accepts and reads data as any ordinary (and willing) file, but discards data written to it. The device will probe for certain hardware entropy sources, and use these in preference to the fallback, which is a generator implemented in software.

    If the device is using the software generator, writing data to would perturb the internal state. This perturbation of the internal state is the only userland method of introducing extra entropy into the device. If the writer has superuser privilege, then closing the device after writing will make the software generator reseed itself. This can be used for extra security, as it immediately introduces any/all new entropy into the PRNG. The hardware generators will generate sufficient quantities of entropy, and will therefore ignore user-supplied input. The software device may be controlled with sysctl(8).

    To see the current settings of the software device, use the command line:

    sysctl kern.random

    which results in something like:

    kern.random.sys.seeded: 1
    kern.random.sys.harvest.ethernet: 1
    kern.random.sys.harvest.point_to_point: 1
    kern.random.sys.harvest.interrupt: 1
    kern.random.sys.harvest.swi: 0
    kern.random.yarrow.gengateinterval: 10
    kern.random.yarrow.bins: 10
    kern.random.yarrow.fastthresh: 192
    kern.random.yarrow.slowthresh: 256
    kern.random.yarrow.slowoverthresh: 2
    

    (These would not be seen if a hardware generator is present.)

    All settings are read/write.

    The kern.random.sys.seeded variable indicates whether or not the device is in an acceptably secure state as a result of reseeding. If set to 0, the device will block (on read) until the next reseed (which can be from an explicit write, or as a result of entropy harvesting). A reseed will set the value to 1 (non-blocking).

    The kern.random.sys.harvest.ethernet variable is used to select LAN traffic as an entropy source. A 0 (zero) value means that LAN traffic is not considered as an entropy source. Set the variable to 1 (one) if you wish to use LAN traffic for entropy harvesting.

    The kern.random.sys.harvest.point_to_point variable is used to select serial line traffic as an entropy source. (Serial line traffic includes PPP, SLIP and all tun0 traffic.) A 0 (zero) value means such traffic is not considered as an entropy source. Set the variable to 1 (one) if you wish to use it for entropy harvesting.

    The kern.random.sys.harvest.interrupt variable is used to select hardware interrupts as an entropy source. A 0 (zero) value means hardware interrupts are not considered as an entropy source. Set the variable to 1 (one) if you wish to use them for entropy harvesting. All hardware interrupt harvesting is set up by the individual device drivers.

    The kern.random.sys.harvest.swi variable is used to select software interrupts as an entropy source. A 0 (zero) value means software interrupts are not considered as an entropy source. Set the variable to 1 (one) if you wish to use them for entropy harvesting.

    The other variables are explained in the paper describing the Yarrow algorithm at http://www.counterpane.com/yarrow.html

    These variables are all limited in terms of the values they may contain:

    kern.random.yarrow.gengateinterval
    Bq 4..64
    kern.random.yarrow.bins
    Bq 2..16
    kern.random.yarrow.fastthresh
    Bq 64..256
    kern.random.yarrow.slowthresh
    Bq 64..256
    kern.random.yarrow.slowoverthresh
    Bq 1..5

    Internal sysctl(3) handlers force the above variables into the stated ranges.  

    RANDOMNESS

    The use of randomness in the field of computing is a rather subtle issue because randomness means different things to different people. Consider generating a password randomly, simulating a coin tossing experiment or choosing a random back-off period when a server does not respond. Each of these tasks requires random numbers, but the random numbers in each case have different requirements.

    Generation of passwords, session keys and the like requires cryptographic randomness. A cryptographic random number generator should be designed so that its output is difficult to guess, even if a lot of auxiliary information is known (such as when it was seeded, subsequent or previous output, and so on). On Fx , seeding for cryptographic random number generators is provided by the device, which provides real randomness. The arc4random(3) library call provides a pseudo-random sequence which is generally reckoned to be suitable for simple cryptographic use. The OpenSSL library also provides functions for managing randomness via functions such as RAND_bytes3 and RAND_add3. Note that OpenSSL uses the device for seeding automatically.

    Randomness for simulation is required in engineering or scientific software and games. The first requirement of these applications is that the random numbers produced conform to some well-known, usually uniform, distribution. The sequence of numbers should also appear numerically uncorrelated, as simulation often assumes independence of its random inputs. Often it is desirable to reproduce the results of a simulation exactly, so that if the generator is seeded in the same way, it should produce the same results. A peripheral concern for simulation is the speed of a random number generator.

    Another issue in simulation is the size of the state associated with the random number generator, and how frequently it repeats itself. For example, a program which shuffles a pack of cards should have 52! possible outputs, which requires the random number generator to have 52! starting states. This means the seed should have at least log_2(52!) ~ 226 bits of state if the program is to stand a chance of outputting all possible sequences, and the program needs some unbiased way of generating these bits. Again, the device could be used for seeding here, but in practice, smaller seeds are usually considered acceptable.

    Fx provides two families of functions which are considered suitable for simulation. The random(3) family of functions provides a random integer between 0 to (2**31)-1. The functions srandom(3), initstate(3) and setstate(3) are provided for deterministically setting the state of the generator and the function srandomdev(3) is provided for setting the state via the device. The drand48(3) family of functions are also provided, which provide random floating point numbers in various ranges.

    Randomness that is used for collision avoidance (for example, in certain network protocols) has slightly different semantics again. It is usually expected that the numbers will be uniform, as this produces the lowest chances of collision. Here again, the seeding of the generator is very important, as it is required that different instances of the generator produce independent sequences. However, the guessability or reproducibility of the sequence is unimportant, unlike the previous cases.

    One final consideration for the seeding of random number generators is a bootstrapping problem. In some cases, it may be difficult to find enough randomness to seed a random number generator until a system is fully operational, but the system requires random numbers to become fully operational. There is no substitute for careful thought here, but the Fx device, which is based on the Yarrow system, should be of some help in this area.

    Fx does also provide the traditional rand(3) library call, for compatibility purposes. However, it is known to be poor for simulation and absolutely unsuitable for cryptographic purposes, so its use is discouraged.  

    FILES

    /dev/random

     

    SEE ALSO

    arc4random(3), drand48(3), rand(3), RAND_add3, RAND_bytes3, random(3), sysctl(8)  

    HISTORY

    A device appeared in Fx 2.2 . The early version was taken from Theodore Ts'o's entropy driver for Linux. The current software implementation, introduced in Fx 5.0 , is a complete rewrite by An Mark R V Murray , and is an implementation of the Yarrow algorithm by Bruce Schneier, et al The only hardware implementation currently is for the VIA C3 Nehemiah (stepping 3 or greater) CPU. More will be added in the future.

    The author gratefully acknowledges significant assistance from VIA Technologies, Inc.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    RANDOMNESS
    FILES
    SEE ALSO
    HISTORY


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру