The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

remote (5)
  • remote (4) ( Solaris man: Специальные файлы /dev/* )
  • >> remote (5) ( FreeBSD man: Форматы файлов )
  • Ключ remote обнаружен в базе ключевых слов.

  • BSD mandoc
     

    NAME

    
    
    remote
    
     - remote host description file
    
     
    

    DESCRIPTION

    The systems known by tip(1) and their attributes are stored in an ASCII file which is structured somewhat like the termcap(5) file. Each line in the file provides a description for a single system Fields are separated by a colon (``:''). Lines ending in a \ character with an immediately following newline are continued on the next line.

    The first entry is the name(s) of the host system. If there is more than one name for a system, the names are separated by vertical bars. After the name of the system comes the fields of the description. A field name followed by an `=' sign indicates a string value. A field name followed by a `#' sign indicates a numeric value.

    Entries named ``tip*'' and ``cu*'' are used as default entries by tip(1), and the cu(1) interface to tip as follows. When tip is invoked with only a phone number, it looks for an entry of the form ``tip300'', where 300 is the data rate with which the connection is to be made. When the cu interface is used, entries of the form ``cu300'' are used.  

    CAPABILITIES

    Capabilities are either strings (str), numbers (num), or boolean flags (bool). A string capability is specified by capability = value for example, ``dv=/dev/harris''. A numeric capability is specified by capability # value for example, ``xa#99''. A boolean capability is specified by simply listing the capability.

    at
    (str) Auto call unit type.
    br
    (num) The data rate (bits per second) used for communications on the serial port. When a modem is used, the data rate used to communicate with the remote modem may be different than this rate. This is a decimal number. The default rate is 9600 bits per second.
    cm
    (str) An initial connection message to be sent to the remote host. For example, if a host is reached through a port selector, this might be set to the appropriate sequence required to switch to the host.
    cu
    (str) Call unit if making a phone call. Default is the same as the `dv' field.
    di
    (str) Disconnect message sent to the host when a disconnect is requested by the user.
    du
    (bool) This host is on a dial-up line.
    dv
    (str) UNIX device(s) to open to establish a connection. If this file refers to a terminal line, tip(1) attempts to perform an exclusive open on the device to ensure only one user at a time has access to the port.
    el
    (str) Characters marking an end-of-line. The default is NULL `~' escapes are only recognized by tip after one of the characters in `el', or after a carriage-return.
    fs
    (str) Frame size for transfers. The default frame size is equal to BUFSIZ
    hd
    (bool) The host uses half-duplex communication, local echo should be performed.
    ie
    (str) Input end-of-file marks. The default is NULL
    oe
    (str) Output end-of-file string. The default is NULL When tip is transferring a file, this string is sent at end-of-file.
    pa
    (str) The type of parity to use when sending data to the host. This may be one of ``even'', ``odd'', ``none'', ``zero'' (always set bit 8 to zero), ``one'' (always set bit 8 to 1). The default is even parity.
    pn
    (str) Telephone number(s) for this host. If the telephone number field contains an @ sign, tip searches the file /etc/phones file for a list of telephone numbers (see phones(5)).
    tc
    (str) Indicates that the list of capabilities is continued in the named description. This is used primarily to share common capability information.

     

    FILES

    /etc/remote
    The host description file resides in /etc

     

    EXAMPLES

    Here is a short example showing the use of the capability continuation feature. It defines a 56k modem connection on the first serial port at 115200 bits per second, no parity using the Hayes command set with standard line editing and end of file characters. The arpavax entry includes everything in the UNIX-57600 entry plus the phone number for arpavax (in this case an @ character so that it is retrieved from the environment).
    UNIX-57600:\
    :dv=/dev/cuad0:el=^D^U^C^S^Q^O@:oe=^D:du:at=hayes:br#115200:pa=none:
    arpavax|ax:\
    :pn=\@:tc=UNIX-57600
    
     

    SEE ALSO

    cu(1), tip(1), phones(5)  

    HISTORY

    The file format appeared in BSD 4.2  

    BUGS

    The tip(1) utility uses its own notion of the serial ports data rate rather than the system default for a serial port.


     

    Index

    NAME
    DESCRIPTION
    CAPABILITIES
    FILES
    EXAMPLES
    SEE ALSO
    HISTORY
    BUGS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру