The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

smbcacls (1)
  • >> smbcacls (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    smbcacls - Set or get ACLs on an NT file or directory names
     
    

    SYNOPSIS

    smbcacls {//server/share} {filename} [-D═acls] [-M═acls] [-a═acls] [-S═acls] [-C═name] [-G═name] [--numeric] [-t] [-U═username] [-h] [-d]
     

    DESCRIPTION

    This tool is part of the samba(7) suite.

    The smbcacls program manipulates NT Access Control Lists (ACLs) on SMB file shares.  

    OPTIONS

    The following options are available to the smbcacls program. The format of ACLs is described in the section ACL FORMAT

    -a acls

    Add the ACLs specified to the ACL list. Existing access control entries are unchanged.

    -M acls

    Modify the mask value (permissions) for the ACLs specified on the command line. An error will be printed for each ACL specified that was not already present in the ACL list

    -D acls

    Delete any ACLs specified on the command line. An error will be printed for each ACL specified that was not already present in the ACL list.

    -S acls

    This command sets the ACLs on the file with only the ones specified on the command line. All other ACLs are erased. Note that the ACL specified must contain at least a revision, type, owner and group for the call to succeed.

    -U username

    Specifies a username used to connect to the specified service. The username may be of the form "username" in which case the user is prompted to enter in a password and the workgroup specified in the smb.conf(5) file is used, or "username%password" or "DOMAINsername%password" and the password and workgroup names are used as provided.

    -C name

    The owner of a file or directory can be changed to the name given using the -C option. The name can be a sid in the form S-1-x-y-z or a name resolved against the server specified in the first argument.

    This command is a shortcut for -M OWNER:name.

    -G name

    The group owner of a file or directory can be changed to the name given using the -G option. The name can be a sid in the form S-1-x-y-z or a name resolved against the server specified n the first argument.

    This command is a shortcut for -M GROUP:name.

    --numeric

    This option displays all ACL information in numeric format. The default is to convert SIDs to names and ACE types and masks to a readable string format.

    -t

    Don't actually do anything, only validate the correctness of the arguments.

    -h|--help

    Print a summary of command line options.

    -V

    Prints the program version number.

    -s <configuration file>

    The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See smb.conf for more information. The default configuration file name is determined at compile time.

    -d|--debuglevel=level

    level is an integer from 0 to 10. The default value if this parameter is not specified is zero.

    The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.

    Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.

    Note that specifying this parameter here will override the

    parameter in the smb.conf file.

    -l|--logfile=logdirectory

    Base directory name for log/debug files. The extension ".progname" will be appended (e.g. log.smbclient, log.smbd, etc...). The log file is never removed by the client.
     

    ACL FORMAT

    The format of an ACL is one or more ACL entries separated by either commas or newlines. An ACL entry is one of the following:

     
    REVISION:<revision number>
    OWNER:<sid or name>
    GROUP:<sid or name>
    ACL:<sid or name>:<type>/<flags>/<mask>
    
    

    The revision of the ACL specifies the internal Windows NT ACL revision for the security descriptor. If not specified it defaults to 1. Using values other than 1 may cause strange behaviour.

    The owner and group specify the owner and group sids for the object. If a SID in the format S-1-x-y-z is specified this is used, otherwise the name specified is resolved using the server on which the file or directory resides.

    ACLs specify permissions granted to the SID. This SID again can be specified in S-1-x-y-z format or as a name in which case it is resolved against the server on which the file or directory resides. The type, flags and mask values determine the type of access granted to the SID.

    The type can be either 0 or 1 corresponding to ALLOWED or DENIED access to the SID. The flags values are generally zero for file ACLs and either 9 or 2 for directory ACLs. Some common flags are:

    *
    #define SEC_ACE_FLAG_OBJECT_INHERIT 0x1
    *
    #define SEC_ACE_FLAG_CONTAINER_INHERIT 0x2
    *
    #define SEC_ACE_FLAG_NO_PROPAGATE_INHERIT 0x4
    *
    #define SEC_ACE_FLAG_INHERIT_ONLY 0x8

    At present flags can only be specified as decimal or hexadecimal values.

    The mask is a value which expresses the access right granted to the SID. It can be given as a decimal or hexadecimal value, or by using one of the following text strings which map to the NT file permissions of the same name.

    *
    R - Allow read access
    *
    W - Allow write access
    *
    X - Execute permission on the object
    *
    D - Delete the object
    *
    P - Change permissions
    *
    O - Take ownership

    The following combined permissions can be specified:

    *
    READ - Equivalent to 'RX' permissions
    *
    CHANGE - Equivalent to 'RXWD' permissions
    *
    FULL - Equivalent to 'RWXDPO' permissions
     

    EXIT STATUS

    The smbcacls program sets the exit status depending on the success or otherwise of the operations performed. The exit status may be one of the following values.

    If the operation succeeded, smbcacls returns and exit status of 0. If smbcacls couldn't connect to the specified server, or there was an error getting or setting the ACLs, an exit status of 1 is returned. If there was an error parsing any command line arguments, an exit status of 2 is returned.  

    VERSION

    This man page is correct for version 3.0 of the Samba suite.  

    AUTHOR

    The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.

    smbcacls was written by Andrew Tridgell and Tim Potter.

    The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    OPTIONS
    ACL FORMAT
    EXIT STATUS
    VERSION
    AUTHOR


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру