The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

termios (3)
  • termios (3) ( Solaris man: Библиотечные вызовы )
  • termios (3) ( Русские man: Библиотечные вызовы )
  • >> termios (3) ( Linux man: Библиотечные вызовы )
  • termios (4) ( FreeBSD man: Специальные файлы /dev/* )
  •  

    NAME

    termios, tcgetattr, tcsetattr, tcsendbreak, tcdrain, tcflush, tcflow,
    cfmakeraw, cfgetospeed, cfgetispeed, cfsetispeed, cfsetospeed, cfsetspeed -
    get and set terminal attributes, line control, get and set baud rate
     
    

    SYNOPSIS

    #include <termios.h>
    
    #include <unistd.h> int tcgetattr(int fd, struct termios *termios_p); int tcsetattr(int fd, int optional_actions, const struct termios *termios_p); int tcsendbreak(int fd, int duration); int tcdrain(int fd); int tcflush(int fd, int queue_selector); int tcflow(int fd, int action); void cfmakeraw(struct termios *termios_p); speed_t cfgetispeed(const struct termios *termios_p); speed_t cfgetospeed(const struct termios *termios_p); int cfsetispeed(struct termios *termios_p, speed_t speed); int cfsetospeed(struct termios *termios_p, speed_t speed); int cfsetspeed(struct termios *termios_p, speed_t speed);

    Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

    cfsetspeed(), cfmakeraw(): _BSD_SOURCE  

    DESCRIPTION

    The termios functions describe a general terminal interface that is provided to control asynchronous communications ports.  

    The termios structure

    Many of the functions described here have a termios_p argument that is a pointer to a termios structure. This structure contains at least the following members:

    tcflag_t c_iflag;      /* input modes */
    tcflag_t c_oflag;      /* output modes */
    tcflag_t c_cflag;      /* control modes */
    tcflag_t c_lflag;      /* local modes */
    cc_t     c_cc[NCCS];   /* control chars */
    

    The values that may be assigned to these fields are described below. In the case of the first four bit-mask fields, the definitions of some of the associated flags that may be set are only exposed if a specific feature test macro (see feature_test_macros(7)) is defined, as noted in brackets ("[]").

    In the descriptions below, "not in POSIX" means that the value is not specified in POSIX.1-2001, and "XSI" means that the value is specified in POSIX.1-2001 as part of the XSI extension.

    c_iflag flag constants:

    IGNBRK
    Ignore BREAK condition on input.
    BRKINT
    If IGNBRK is set, a BREAK is ignored. If it is not set but BRKINT is set, then a BREAK causes the input and output queues to be flushed, and if the terminal is the controlling terminal of a foreground process group, it will cause a SIGINT to be sent to this foreground process group. When neither IGNBRK nor BRKINT are set, a BREAK reads as a null byte (aq\0aq), except when PARMRK is set, in which case it reads as the sequence \377 \0 \0.
    IGNPAR
    Ignore framing errors and parity errors.
    PARMRK
    If IGNPAR is not set, prefix a character with a parity error or framing error with \377 \0. If neither IGNPAR nor PARMRK is set, read a character with a parity error or framing error as \0.
    INPCK
    Enable input parity checking.
    ISTRIP
    Strip off eighth bit.
    INLCR
    Translate NL to CR on input.
    IGNCR
    Ignore carriage return on input.
    ICRNL
    Translate carriage return to newline on input (unless IGNCR is set).
    IUCLC
    (not in POSIX) Map uppercase characters to lowercase on input.
    IXON
    Enable XON/XOFF flow control on output.
    IXANY
    (XSI) Typing any character will restart stopped output. (The default is to allow just the START character to restart output.)
    IXOFF
    Enable XON/XOFF flow control on input.
    IMAXBEL
    (not in POSIX) Ring bell when input queue is full. Linux does not implement this bit, and acts as if it is always set.
    IUTF8 (since Linux 2.6.4)
    (not in POSIX) Input is UTF8; this allows character-erase to be correctly performed in cooked mode.

    c_oflag flag constants defined in POSIX.1:

    OPOST
    Enable implementation-defined output processing.

    The remaining c_oflag flag constants are defined in POSIX.1-2001, unless marked otherwise.

    OLCUC
    (not in POSIX) Map lowercase characters to uppercase on output.
    ONLCR
    (XSI) Map NL to CR-NL on output.
    OCRNL
    Map CR to NL on output.
    ONOCR
    Don't output CR at column 0.
    ONLRET
    Don't output CR.
    OFILL
    Send fill characters for a delay, rather than using a timed delay.
    OFDEL
    (not in POSIX) Fill character is ASCII DEL (0177). If unset, fill character is ASCII NUL (aq\0aq). (Not implemented on Linux.)
    NLDLY
    Newline delay mask. Values are NL0 and NL1. [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
    CRDLY
    Carriage return delay mask. Values are CR0, CR1, CR2, or CR3. [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
    TABDLY
    Horizontal tab delay mask. Values are TAB0, TAB1, TAB2, TAB3 (or XTABS). A value of TAB3, that is, XTABS, expands tabs to spaces (with tab stops every eight columns). [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
    BSDLY
    Backspace delay mask. Values are BS0 or BS1. (Has never been implemented.) [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
    VTDLY
    Vertical tab delay mask. Values are VT0 or VT1.
    FFDLY
    Form feed delay mask. Values are FF0 or FF1. [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]

    c_cflag flag constants:

    CBAUD
    (not in POSIX) Baud speed mask (4+1 bits). [requires _BSD_SOURCE or _SVID_SOURCE]
    CBAUDEX
    (not in POSIX) Extra baud speed mask (1 bit), included in CBAUD. [requires _BSD_SOURCE or _SVID_SOURCE]

    (POSIX says that the baud speed is stored in the termios structure without specifying where precisely, and provides cfgetispeed() and cfsetispeed() for getting at it. Some systems use bits selected by CBAUD in c_cflag, other systems use separate fields, for example, sg_ispeed and sg_ospeed.)

    CSIZE
    Character size mask. Values are CS5, CS6, CS7, or CS8.
    CSTOPB
    Set two stop bits, rather than one.
    CREAD
    Enable receiver.
    PARENB
    Enable parity generation on output and parity checking for input.
    PARODD
    If set, then parity for input and output is odd; otherwise even parity is used.
    HUPCL
    Lower modem control lines after last process closes the device (hang up).
    CLOCAL
    Ignore modem control lines.
    LOBLK
    (not in POSIX) Block output from a non-current shell layer. For use by shl (shell layers). (Not implemented on Linux.)
    CIBAUD
    (not in POSIX) Mask for input speeds. The values for the CIBAUD bits are the same as the values for the CBAUD bits, shifted left IBSHIFT bits. [requires _BSD_SOURCE or _SVID_SOURCE] (Not implemented on Linux.)
    CMSPAR
    (not in POSIX) Use "stick" (mark/space) parity (supported on certain serial devices): if PARODD is set, the parity bit is always 1; if PARODD is not set, then the parity bit is always 0). [requires _BSD_SOURCE or _SVID_SOURCE]
    CRTSCTS
    (not in POSIX) Enable RTS/CTS (hardware) flow control. [requires _BSD_SOURCE or _SVID_SOURCE]

    c_lflag flag constants:

    ISIG
    When any of the characters INTR, QUIT, SUSP, or DSUSP are received, generate the corresponding signal.
    ICANON
    Enable canonical mode (described below).
    XCASE
    (not in POSIX; not supported under Linux) If ICANON is also set, terminal is uppercase only. Input is converted to lowercase, except for characters preceded by \. On output, uppercase characters are preceded by \ and lowercase characters are converted to uppercase. [requires _BSD_SOURCE or _SVID_SOURCE or _XOPEN_SOURCE]
    ECHO
    Echo input characters.
    ECHOE
    If ICANON is also set, the ERASE character erases the preceding input character, and WERASE erases the preceding word.
    ECHOK
    If ICANON is also set, the KILL character erases the current line.
    ECHONL
    If ICANON is also set, echo the NL character even if ECHO is not set.
    ECHOCTL
    (not in POSIX) If ECHO is also set, ASCII control signals other than TAB, NL, START, and STOP are echoed as ^X, where X is the character with ASCII code 0x40 greater than the control signal. For example, character 0x08 (BS) is echoed as ^H. [requires _BSD_SOURCE or _SVID_SOURCE]
    ECHOPRT
    (not in POSIX) If ICANON and IECHO are also set, characters are printed as they are being erased. [requires _BSD_SOURCE or _SVID_SOURCE]
    ECHOKE
    (not in POSIX) If ICANON is also set, KILL is echoed by erasing each character on the line, as specified by ECHOE and ECHOPRT. [requires _BSD_SOURCE or _SVID_SOURCE]
    DEFECHO
    (not in POSIX) Echo only when a process is reading. (Not implemented on Linux.)
    FLUSHO
    (not in POSIX; not supported under Linux) Output is being flushed. This flag is toggled by typing the DISCARD character. [requires _BSD_SOURCE or _SVID_SOURCE]
    NOFLSH
    Disable flushing the input and output queues when generating the SIGINT, SIGQUIT, and SIGSUSP signals.
    TOSTOP
    Send the SIGTTOU signal to the process group of a background process which tries to write to its controlling terminal.
    PENDIN
    (not in POSIX; not supported under Linux) All characters in the input queue are reprinted when the next character is read. (bash(1) handles typeahead this way.) [requires _BSD_SOURCE or _SVID_SOURCE]
    IEXTEN
    Enable implementation-defined input processing. This flag, as well as ICANON must be enabled for the special characters EOL2, LNEXT, REPRINT, WERASE to be interpreted, and for the IUCLC flag to be effective.

    The c_cc array defines the special control characters. The symbolic indices (initial values) and meaning are:

    VINTR
    (003, ETX, Ctrl-C, or also 0177, DEL, rubout) Interrupt character. Send a SIGINT signal. Recognized when ISIG is set, and then not passed as input.
    VQUIT
    (034, FS, Ctrl-\) Quit character. Send SIGQUIT signal. Recognized when ISIG is set, and then not passed as input.
    VERASE
    (0177, DEL, rubout, or 010, BS, Ctrl-H, or also #) Erase character. This erases the previous not-yet-erased character, but does not erase past EOF or beginning-of-line. Recognized when ICANON is set, and then not passed as input.
    VKILL
    (025, NAK, Ctrl-U, or Ctrl-X, or also @) Kill character. This erases the input since the last EOF or beginning-of-line. Recognized when ICANON is set, and then not passed as input.
    VEOF
    (004, EOT, Ctrl-D) End-of-file character. More precisely: this character causes the pending tty buffer to be sent to the waiting user program without waiting for end-of-line. If it is the first character of the line, the read(2) in the user program returns 0, which signifies end-of-file. Recognized when ICANON is set, and then not passed as input.
    VMIN
    Minimum number of characters for non-canonical read.
    VEOL
    (0, NUL) Additional end-of-line character. Recognized when ICANON is set.
    VTIME
    Timeout in deciseconds for non-canonical read.
    VEOL2
    (not in POSIX; 0, NUL) Yet another end-of-line character. Recognized when ICANON is set.
    VSWTCH
    (not in POSIX; not supported under Linux; 0, NUL) Switch character. (Used by shl only.)
    VSTART
    (021, DC1, Ctrl-Q) Start character. Restarts output stopped by the Stop character. Recognized when IXON is set, and then not passed as input.
    VSTOP
    (023, DC3, Ctrl-S) Stop character. Stop output until Start character typed. Recognized when IXON is set, and then not passed as input.
    VSUSP
    (032, SUB, Ctrl-Z) Suspend character. Send SIGTSTP signal. Recognized when ISIG is set, and then not passed as input.
    VDSUSP
    (not in POSIX; not supported under Linux; 031, EM, Ctrl-Y) Delayed suspend character: send SIGTSTP signal when the character is read by the user program. Recognized when IEXTEN and ISIG are set, and the system supports job control, and then not passed as input.
    VLNEXT
    (not in POSIX; 026, SYN, Ctrl-V) Literal next. Quotes the next input character, depriving it of a possible special meaning. Recognized when IEXTEN is set, and then not passed as input.
    VWERASE
    (not in POSIX; 027, ETB, Ctrl-W) Word erase. Recognized when ICANON and IEXTEN are set, and then not passed as input.
    VREPRINT
    (not in POSIX; 022, DC2, Ctrl-R) Reprint unread characters. Recognized when ICANON and IEXTEN are set, and then not passed as input.
    VDISCARD
    (not in POSIX; not supported under Linux; 017, SI, Ctrl-O) Toggle: start/stop discarding pending output. Recognized when IEXTEN is set, and then not passed as input.
    VSTATUS
    (not in POSIX; not supported under Linux; status request: 024, DC4, Ctrl-T).

    These symbolic subscript values are all different, except that VTIME, VMIN may have the same value as VEOL, VEOF, respectively. In non-canonical mode the special character meaning is replaced by the timeout meaning. For an explanation of VMIN and VTIME, see the description of non-canonical mode below.  

    Retrieving and changing terminal settings

    tcgetattr() gets the parameters associated with the object referred by fd and stores them in the termios structure referenced by termios_p. This function may be invoked from a background process; however, the terminal attributes may be subsequently changed by a foreground process.

    tcsetattr() sets the parameters associated with the terminal (unless support is required from the underlying hardware that is not available) from the termios structure referred to by termios_p. optional_actions specifies when the changes take effect:

    TCSANOW
    the change occurs immediately.
    TCSADRAIN
    the change occurs after all output written to fd has been transmitted. This function should be used when changing parameters that affect output.
    TCSAFLUSH
    the change occurs after all output written to the object referred by fd has been transmitted, and all input that has been received but not read will be discarded before the change is made.
     

    Canonical and non-canonical mode

    The setting of the ICANON canon flag in c_lflag determines whether the terminal is operating in canonical mode (ICANON set) or non-canonical mode (ICANON unset). By default, ICANON set.

    In canonical mode:

    *
    Input is made available line by line. An input line is available when one of the line delimiters is typed (NL, EOL, EOL2; or EOF at the start of line). Except in the case of EOF, the line delimiter is included in the buffer returned by read(2).
    *
    Line editing is enabled (ERASE, KILL; and if the IEXTEN flag is set: WERASE, REPRINT, LNEXT). A read(2) returns at most one line of input; if the read(2) requested fewer bytes than are available in the current line of input, then only as many bytes as requested are read, and the remaining characters will be available for a future read(2).

    In non-canonical mode input is available immediately (without the user having to type a line-delimiter character), and line editing is disabled. The settings of MIN (c_cc[VMIN]) and TIME (c_cc[VTIME]) determine the circumstances in which a read(2) completes; there are four distinct cases:

    *
    MIN == 0; TIME == 0: If data is available, read(2) returns immediately, with the lesser of the number of bytes available, or the number of bytes requested. If no data is available, read(2) returns 0.
    *
    MIN > 0; TIME == 0: read(2) blocks until the lesser of MIN bytes or the number of bytes requested are available, and returns the lesser of these two values.
    *
    MIN == 0; TIME > 0: TIME specifies the limit for a timer in tenths of a second. The timer is started when read(2) is called. read(2) returns either when at least one byte of data is available, or when the timer expires. If the timer expires without any input becoming available, read(2) returns 0.
    *
    MIN > 0; TIME > 0: TIME specifies the limit for a timer in tenths of a second. Once an initial byte of input becomes available, the timer is restarted after each further byte is received. read(2) returns either when the lesser of the number of bytes requested or MIN byte have been read, or when the inter-byte timeout expires. Because the timer is only started after the initial byte becomes available, at least one byte will be read.
     

    Raw mode

    cfmakeraw() sets the terminal to something like the "raw" mode of the old Version 7 terminal driver: input is available character by character, echoing is disabled, and all special processing of terminal input and output characters is disabled. The terminal attributes are set as follows:

    
        termios_p->c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP
                        | INLCR | IGNCR | ICRNL | IXON);
        termios_p->c_oflag &= ~OPOST;
        termios_p->c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
        termios_p->c_cflag &= ~(CSIZE | PARENB);
        termios_p->c_cflag |= CS8;
    
     

    Line control

    tcsendbreak() transmits a continuous stream of zero-valued bits for a specific duration, if the terminal is using asynchronous serial data transmission. If duration is zero, it transmits zero-valued bits for at least 0.25 seconds, and not more that 0.5 seconds. If duration is not zero, it sends zero-valued bits for some implementation-defined length of time.

    If the terminal is not using asynchronous serial data transmission, tcsendbreak() returns without taking any action.

    tcdrain() waits until all output written to the object referred to by fd has been transmitted.

    tcflush() discards data written to the object referred to by fd but not transmitted, or data received but not read, depending on the value of queue_selector:

    TCIFLUSH
    flushes data received but not read.
    TCOFLUSH
    flushes data written but not transmitted.
    TCIOFLUSH
    flushes both data received but not read, and data written but not transmitted.

    tcflow() suspends transmission or reception of data on the object referred to by fd, depending on the value of action:

    TCOOFF
    suspends output.
    TCOON
    restarts suspended output.
    TCIOFF
    transmits a STOP character, which stops the terminal device from transmitting data to the system.
    TCION
    transmits a START character, which starts the terminal device transmitting data to the system.

    The default on open of a terminal file is that neither its input nor its output is suspended.  

    Line speed

    The baud rate functions are provided for getting and setting the values of the input and output baud rates in the termios structure. The new values do not take effect until tcsetattr() is successfully called.

    Setting the speed to B0 instructs the modem to "hang up". The actual bit rate corresponding to B38400 may be altered with setserial(8).

    The input and output baud rates are stored in the termios structure.

    cfgetospeed() returns the output baud rate stored in the termios structure pointed to by termios_p.

    cfsetospeed() sets the output baud rate stored in the termios structure pointed to by termios_p to speed, which must be one of these constants:

    
            B0
            B50
            B75
            B110
            B134
            B150
            B200
            B300
            B600
            B1200
            B1800
            B2400
            B4800
            B9600
            B19200
            B38400
            B57600
            B115200
            B230400
    
    
    The zero baud rate, B0, is used to terminate the connection. If B0 is specified, the modem control lines shall no longer be asserted. Normally, this will disconnect the line. CBAUDEX is a mask for the speeds beyond those defined in POSIX.1 (57600 and above). Thus, B57600 & CBAUDEX is non-zero.

    cfgetispeed() returns the input baud rate stored in the termios structure.

    cfsetispeed() sets the input baud rate stored in the termios structure to speed, which must be specified as one of the Bnnn constants listed above for cfsetospeed(). If the input baud rate is set to zero, the input baud rate will be equal to the output baud rate.

    cfsetspeed() is a 4.4BSD extension. It takes the same arguments as cfsetispeed(), and sets both input and output speed.  

    RETURN VALUE

    cfgetispeed() returns the input baud rate stored in the termios structure.

    cfgetospeed() returns the output baud rate stored in the termios structure.

    All other functions return:

    0
    on success.
    -1
    on failure and set errno to indicate the error.

    Note that tcsetattr() returns success if any of the requested changes could be successfully carried out. Therefore, when making multiple changes it may be necessary to follow this call with a further call to tcgetattr() to check that all changes have been performed successfully.  

    CONFORMING TO

    tcgetattr(), tcsetattr(), tcsendbreak(), tcdrain(), tcflush(), tcflow(), cfgetispeed(), cfgetospeed(), cfsetispeed(), and cfsetospeed() are specified in POSIX.1-2001.

    cfmakeraw() and cfsetspeed() are non-standard, but available on the BSDs.  

    NOTES

    Unix V7 and several later systems have a list of baud rates where after the fourteen values B0, ..., B9600 one finds the two constants EXTA, EXTB ("External A" and "External B"). Many systems extend the list with much higher baud rates.

    The effect of a non-zero duration with tcsendbreak() varies. SunOS specifies a break of duration * N seconds, where N is at least 0.25, and not more than 0.5. Linux, AIX, DU, Tru64 send a break of duration milliseconds. FreeBSD and NetBSD and HP-UX and MacOS ignore the value of duration. Under Solaris and Unixware, tcsendbreak() with non-zero duration behaves like tcdrain().  

    SEE ALSO

    stty(1), console_ioctl(4), tty_ioctl(4), setserial(8)  

    COLOPHON

    This page is part of release 3.14 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    The termios structure
    Retrieving and changing terminal settings
    Canonical and non-canonical mode
    Raw mode
    Line control
    Line speed
    RETURN VALUE
    CONFORMING TO
    NOTES
    SEE ALSO
    COLOPHON


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру