>нда... как все запущено...
>давно ли в 8 соляре такой драйвер появился?
>а это что прикол такой, для чипа RTL дрова от чипа SMC
>ставить?
>
>теперь ответы:
>никакой, ибо нету подержки в 8 соляре сего агрегата...
>RFM находится здесь http://www.sun.com/bigadmin/hcl/sol8/202/p6.htm
Ваша НЕ правда!
Драйвер такой под Solaris есть (Solaris 7, 8, 9 and 10)
ftp://210.51.181.211/cn/nic/rtl8139abcd8130810xseries/rtls211.zip
см. http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
Называется rtls Version 2.1.1
(Solaris-Readme.txt)
1. This is the version 2.1.1 RTL8139 serials driver for Solaris/x86
version.
2. It support Speed/Duplex-Force mode, you can set it through rtls.conf file.
3. It supports 3 PCI-VID_DID cards, VID_10EC_DID_8139 for Realtek's
native, VID_1113_DID_1211 for Accton and VID_1186_DID_1301 for
D-Link in the install script.
Устанавливвается так (может кому пригодиться):
4. Install method:
a. Power-off your PC and insert your RTL8139 adapter.
b. Boot-up you Solaris/x86 and login as "root".
c. Copy the "rtls211.zip" into the temporary location in your
hard-driver.
d. UNZIP the "rtls211.zip" and you will get 3 files, "rtls", "rtls.conf" and
"Install".
e. If the PCI ID for your RTL8139 adapter is not VID_10EC_DID_8139
or VID_1113_DID_1211 or VID_1186_DID_1301, you can modify the
"Install" file to match your PCI ID, VID_ABCD_DID_WXYZ for example,
modify the "pci1186,1301" to "pciABCD,WXYZ".
f. Run the "Install" from File Manager to install the driver, and
it will modify 2 files, "/etc/name_to_major" and "/etc/driver_aliases"
g. You need to create the "/etc/hostname.rtls0" file and modify some
other related files to make your networking environments working well.
h. You can execute "touch /reconfigure" then "shutdown -i5 -g0", so that
Solaris will reboot and scan changed hardware environment.
i. You can execute "ifconfig -a" to make sure the RTL8139 driver is up.