Дорогие Гуры поможите пожалуста.

Поставил FREEBSD 7.1

Пытаюсь настроить разадчу инета в локалку через PPPoE

1.Через PPPoE конектится
2.с FreeBSD ping идет
3. С сетки не идет ping и инет

Прилагаю конфиги

rc.conf

# -- sysinstall generated deltas -- # Sat Feb 21 21:24:37 2009
# Created: Sat Feb 21 21:24:37 2009
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.

hostname="freebsd.home"
ifconfig_em0="inet 192.168.1.150  netmask 255.255.255.0"
ifconfig_em1="inet "

webmin_enable="YES"

gateway_enable="YES"
mpd_enable="YES"
pf_enable="YES"
pf_rules="/etc/pf.conf"
pf_flags=""
pflog_enable="YES"
pflog_logfile="/var/log/pflog"
pflog_flags=""
---------------------------------------------------------------------------------

pf.conf

ext_if="ng0"
int_if="em0

altq on

scrub in all

nat on $ext_if from $int_if:network to any -> ($ext_if)

pass in all keep state
pass out all keep state
-----------------------------------------------------------------

mpd.conf

default:
    load PPPoE
PPPoE:
    new -i ng0 PPPoE PPPoE
    set link mtu 1492
    set iface route default
    set iface enable tcpmssfix
    set iface disable on-demand
    set iface idle 0
    set bundle disable multilink
    set bundle authname "ao004584@dsl.ukrtel.net"
    set bundle password  "95214832"
    set link no acfcomp protocomp
    set link disable pap chap
    set link accept chap
    set link keep-alive 10 60
    set ipcp yes vjcomp
    set ipcp ranges 0.0.0.0/0 0.0.0.0/0
    open iface
--------------------------------------------------------------
mpd.links

PPPoE:
    set link type pppoe
    set pppoe iface em1:
    set pppoe service ""
    set pppoe disable incoming
    set pppoe enable originate

------------------------------------------------------------------

Вот что выдает ifconfig

em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
    ether 00:0c:29:c9:f6:99
    inet 192.168.1.150 netmask 0xffffff00 broadcast 192.168.1.255
    media: Ethernet autoselect (1000baseTX <full-duplex>)
    status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM>
    ether 00:0c:29:c9:f6:a3
    media: Ethernet autoselect (1000baseTX <full-duplex>)
    status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
    inet6 ::1 prefixlen 128
    inet 127.0.0.1 netmask 0xff000000
pflog0: flags=141<UP,RUNNING,PROMISC> metric 0 mtu 33204
ng0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
    inet 92.113.39.90 --> 195.5.5.202 netmask 0xffffffff
-------------------------------------------------------------------------------

Лазил по манулам читал форумы не знаю что делать !!!

Что я не так сделал ?