Помогите разобраться с dns клиентом во FreeBSD 8.0-Release
Не резолвит имена хостов

router# ping ukr.net
ping: cannot resolve ukr.net: Host name lookup failure

router# ifconfig vr0
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=2808<VLAN_MTU,WOL_UCAST,WOL_MAGIC>
        ether 00:1c:f0:cb:07:ba
        inet 192.168.10.177 netmask 0xffffff00 broadcast 192.168.10.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

Пакеты во внешнюю сеть
router# ping 193.111.173.53
PING 193.111.173.53 (193.111.173.53): 56 data bytes
64 bytes from 193.111.173.53: icmp_seq=0 ttl=120 time=426.052 ms
64 bytes from 193.111.173.53: icmp_seq=1 ttl=120 time=301.273 ms
64 bytes from 193.111.173.53: icmp_seq=2 ttl=120 time=213.713 ms
64 bytes from 193.111.173.53: icmp_seq=3 ttl=120 time=512.792 ms
64 bytes from 193.111.173.53: icmp_seq=4 ttl=120 time=551.909 ms

vi /etc/resolv.conf

domain  blackip.kiev.ua
nameserver      212.40.34.2
nameserver      212.40.34.10
nameserver      192.168.10.10

router# ping 212.40.34.2 ############ DNS master обслуживающий зону blackip.kiev.ua
PING 212.40.34.2 (212.40.34.2): 56 data bytes
64 bytes from 212.40.34.2: icmp_seq=0 ttl=61 time=590.168 ms
64 bytes from 212.40.34.2: icmp_seq=1 ttl=61 time=591.951 ms
64 bytes from 212.40.34.2: icmp_seq=2 ttl=61 time=557.955 ms
64 bytes from 212.40.34.2: icmp_seq=3 ttl=61 time=347.410 ms
^C
--- 212.40.34.2 ping statistics ---
4 packets transmitted, 4 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 347.410/521.871/591.951/101.630 ms

router# ping 212.40.34.10 ############ DNS slave обслуживающий зону blackip.kiev.ua
PING 212.40.34.10 (212.40.34.10): 56 data bytes
64 bytes from 212.40.34.10: icmp_seq=0 ttl=61 time=1249.041 ms
64 bytes from 212.40.34.10: icmp_seq=1 ttl=61 time=1421.037 ms
64 bytes from 212.40.34.10: icmp_seq=2 ttl=61 time=909.347 ms
64 bytes from 212.40.34.10: icmp_seq=3 ttl=61 time=908.739 ms
^C
--- 212.40.34.10 ping statistics ---
5 packets transmitted, 4 packets received, 20.0% packet loss
round-trip min/avg/max/stddev = 908.739/1122.041/1421.037/221.509 ms

router# ping 192.168.10.10#################кеширующий DNS сервер
PING 192.168.10.10 (192.168.10.10): 56 data bytes
64 bytes from 192.168.10.10: icmp_seq=0 ttl=128 time=0.503 ms
64 bytes from 192.168.10.10: icmp_seq=1 ttl=128 time=1.044 ms
64 bytes from 192.168.10.10: icmp_seq=2 ttl=128 time=0.204 ms

vi /etc/hosts

::1                     localhost blackip.kiev.ua
127.0.0.1               localhost blackip.kiev.ua
192.168.10.177          router.blackip.kiev.ua
192.168.10.177          router.blackip.kiev.ua

vi /etc/hosts.conf

# Auto-generated from nsswitch.conf
hosts
dns

vi /etc/nsswitch.conf

#
# nsswitch.conf(5) - name service switch configuration file
# $FreeBSD: src/etc/nsswitch.conf,v 1.1.10.1.2.1 2009/10/25 01:10:29 kensmith Exp $
#
group: compat
group_compat: nis
hosts: files dns
networks: files
passwd: compat
passwd_compat: nis
shells: files
services: compat
services_compat: nis
protocols: files
rpc: files

vi /etc/inetd.conf

# $FreeBSD: src/etc/inetd.conf,v 1.73.10.2.2.1 2009/10/25 01:10:29 kensmith Exp $
#
# Internet server configuration database
#
# Define *both* IPv4 and IPv6 entries for dual-stack support.
# To disable a service, comment it out by prefixing the line with '#'.
# To enable a service, remove the '#' at the beginning of the line.
#
#ftp    stream  tcp     nowait  root    /usr/libexec/ftpd       ftpd -l
#ftp    stream  tcp6    nowait  root    /usr/libexec/ftpd       ftpd -l
ssh     stream  tcp     nowait  root    /usr/sbin/sshd          sshd -i -4
#ssh    stream  tcp6    nowait  root    /usr/sbin/sshd          sshd -i -6
#telnet stream  tcp     nowait  root    /usr/libexec/telnetd    telnetd
#telnet stream  tcp6    nowait  root    /usr/libexec/telnetd    telnetd
#shell  stream  tcp     nowait  root    /usr/libexec/rshd       rshd
#shell  stream  tcp6    nowait  root    /usr/libexec/rshd       rshd
#login  stream  tcp     nowait  root    /usr/libexec/rlogind    rlogind
#login  stream  tcp6    nowait  root    /usr/libexec/rlogind    rlogind
#finger stream  tcp     nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
#finger stream  tcp6    nowait/3/10 nobody /usr/libexec/fingerd fingerd -s
#
# run comsat as root to be able to print partial mailbox contents w/ biff,
# or use the safer tty:tty to just print that new mail has been received.
#comsat dgram   udp     wait    tty:tty /usr/libexec/comsat     comsat
#
# ntalk is required for the 'talk' utility to work correctly
#ntalk  dgram   udp     wait    tty:tty /usr/libexec/ntalkd     ntalkd
#tftp   dgram   udp     wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot
#tftp   dgram   udp6    wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot
#bootps dgram   udp     wait    root    /usr/libexec/bootpd     bootpd
#
# "Small servers" -- used to be standard on, but we're more conservative
# about things due to Internet security concerns.  Only turn on what you
# need.
#
#daytime stream tcp     nowait  root    internal
#daytime stream tcp6    nowait  root    internal
#daytime dgram  udp     wait    root    internal
#daytime dgram  udp6    wait    root    internal
#time   stream  tcp     nowait  root    internal
#time   stream  tcp6    nowait  root    internal
#time    dgram  udp     wait    root    internal
#time    dgram  udp6    wait    root    internal
#echo   stream  tcp     nowait  root    internal
#echo   stream  tcp6    nowait  root    internal
#echo   dgram   udp     wait    root    internal
#echo   dgram   udp6    wait    root    internal
#discard stream tcp     nowait  root    internal
#discard stream tcp6    nowait  root    internal
#discard dgram  udp     wait    root    internal
#discard dgram  udp6    wait    root    internal
#chargen stream tcp     nowait  root    internal
#chargen stream tcp6    nowait  root    internal
#chargen dgram  udp     wait    root    internal
#chargen dgram  udp6    wait    root    internal
#
# CVS servers - for master CVS repositories only!  You must set the
# --allow-root path correctly or you open a trivial to exploit but
# deadly security hole.
#
#cvspserver     stream  tcp     nowait  root    /usr/bin/cvs    cvs --allow-root=/your/cvsroot/here pserver
#cvspserver     stream  tcp     nowait  root    /usr/bin/cvs    cvs --allow-root=/your/cvsroot/here kserver
#
# RPC based services (you MUST have rpcbind running to use these)
#
#rstatd/1-3     dgram rpc/udp wait root /usr/libexec/rpc.rstatd  rpc.rstatd
#rusersd/1-2    dgram rpc/udp wait root /usr/libexec/rpc.rusersd rpc.rusersd
#walld/1        dgram rpc/udp wait root /usr/libexec/rpc.rwalld  rpc.rwalld
#pcnfsd/1-2     dgram rpc/udp wait root /usr/local/libexec/rpc.pcnfsd    rpc.pcnfsd
#rquotad/1      dgram rpc/udp wait root /usr/libexec/rpc.rquotad rpc.rquotad
#sprayd/1       dgram rpc/udp wait root /usr/libexec/rpc.sprayd  rpc.sprayd
#
# example entry for the optional pop3 server
#
#pop3   stream  tcp     nowait  root    /usr/local/libexec/popper       popper
#
# example entry for the optional imap4 server
#
#imap4  stream  tcp     nowait  root    /usr/local/libexec/imapd        imapd
#
# example entry for the optional nntp server
#
#nntp   stream  tcp     nowait  news    /usr/local/libexec/nntpd        nntpd
#
# example entry for the optional uucpd server
#
#uucpd  stream  tcp     nowait  root    /usr/local/libexec/uucpd        uucpd
#
# Return error for all "ident" requests
#
#auth   stream  tcp     nowait  root    internal
#auth   stream  tcp6    nowait  root    internal
#
# Provide internally a real "ident" service which provides ~/.fakeid support,
# provides ~/.noident support, reports UNKNOWN as the operating system type
# and times out after 30 seconds.
#
#auth   stream  tcp     nowait  root    internal        auth -r -f -n -o UNKNOWN -t 30
#auth   stream  tcp6    nowait  root    internal        auth -r -f -n -o UNKNOWN -t 30
#
# Example entry for an external ident server
#
#auth   stream  tcp     wait    root    /usr/local/sbin/identd  identd -w -t120
#
# Example entry for the optional qmail MTA
#  NOTE: This is no longer the correct way to handle incoming SMTP
#        connections for qmail.  Use tcpserver (http://cr.yp.to/ucspi-tcp.html)
#        instead.
#
#smtp   stream  tcp     nowait  qmaild  /var/qmail/bin/tcp-env  tcp-env /var/qmail/bin/qmail-smtpd
#
# Enable the following two entries to enable samba startup from inetd
# (from the Samba documentation).  Enable the third entry to enable the swat
# samba configuration tool.
#
#netbios-ssn stream tcp nowait          root    /usr/local/sbin/smbd    smbd
#netbios-ns dgram udp   wait            root    /usr/local/sbin/nmbd    nmbd
#swat   stream  tcp     nowait/400      root    /usr/local/sbin/swat    swat

router# sockstat -4
USER     COMMAND    PID   FD PROTO  LOCAL ADDRESS         FOREIGN ADDRESS
admin    sshd       1248  3  tcp4   192.168.10.177:22     192.168.10.7:17308
root     sshd       1245  3  tcp4   192.168.10.177:22     192.168.10.7:17308
root     sendmail   788   4  tcp4   127.0.0.1:25          *:*
root     sshd       781   4  tcp4   *:22                  *:*
root     syslogd    556   7  udp4   *:514                 *:*