Добрый день!
-----------------------------
Press RETURN to get started!

00:01:16: RP: Currently running ROMMON from S (Gold) region
00:01:30: %SYS-6-CLOCKUPDATE: System clock has been updated from 06:58:06 UTC Th
u Jul 27 2006 to 23:58:06 PDT Wed Jul 26 2006, configured from console by consol
e.
00:01:30: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:30: %SYS-5-CONFIG_I: Configured from memory by console
00:01:32: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_rp Software (s3223_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 23-Mar-06 18:22 by tinhuang
00:01:32: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE: Replication Mode Change Dete
cted. Current system replication mode is Ingress
00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure consol
e debugging output.

00:00:06: %OIR-SP-6-CONSOLE: Changing console ownership to route processor

00:00:06: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure con
sole debugging output.

Firmware compiled 06-Mar-06 22:47 by integ Build [100]

00:01:26: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:31: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_sp Software (s3223_sp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF4,
RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Thu 23-Mar-06 18:21 by tinhuang
00:01:31: SP: Currently running ROMMON from S (Gold) region
00:01:34: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:34: фKPWR-SP-4-PSOK: power supply 1 turned on.
00:01:34: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:34: фKPWR-SP-4-PSOK: power supply 2 turned on.
00:01:34: фKPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system i
s operating on both power supplies.
00:01:38: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...
00:01:50: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
00:01:51: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online
----------------------------------------------------------------
Здесь зверь зависает навсегда. Если нажимать Ввод (Enter) сразу после

Press RETURN to get started!

- ничего не происходит. Пользуюсь HyperTerminal ver.6.3. Параметры порта 9600,8,n,2,n.

Подскажите, плиз, как зайти в командную строку сабжа? Аппарат новый.