Добрый день, Ребята помогити тут такой дело LAN не работает :( вот весь принт конфиг:bridge> config print
Module 'bridge':
Active configuration:
Port 1 (ethernet): 'edd'
Port 2 (adsl1): 'xport/1'
Port 3 (adsl2): 'xport/2'
Port 4 (adsl3): 'xport/3'
Port 5 (adsl4): 'xport/4'
Port 6 (adsl5): 'xport/5'
Port 7 (adsl6): 'xport/6'
Port 8 (adsl7): 'xport/7'
Port 9 (adsl8): 'xport/8'
Filter age time: 300
Stored configuration:
Port 1 (ethernet): 'edd'
Port 2 (adsl1): 'xport/1'
Port 3 (adsl2): 'xport/2'
Port 4 (adsl3): 'xport/3'
Port 5 (adsl4): 'xport/4'
Port 6 (adsl5): 'xport/5'
Port 7 (adsl6): 'xport/6'
Port 8 (adsl7): 'xport/7'
Port 9 (adsl8): 'xport/8'
# MAC Count Filtering configuration
Port 1 (ethernet) Disabled Count(max1=0 max2=0)
Port 2 (adsl1) Disabled Count(max1=0 max2=0)
Port 3 (adsl2) Disabled Count(max1=0 max2=0)
Port 4 (adsl3) Disabled Count(max1=0 max2=0)
Port 5 (adsl4) Disabled Count(max1=0 max2=0)
Port 6 (adsl5) Disabled Count(max1=0 max2=0)
Port 7 (adsl6) Disabled Count(max1=0 max2=0)
Port 8 (adsl7) Disabled Count(max1=0 max2=0)
Port 9 (adsl8) Disabled Count(max1=0 max2=0)
# FAST mode configuration
FAST mode Disabled
The default port VLAN id of all bridge ports:
Port 0 (CPU): 1
Port 1 (ethernet): N/A
Port 2 (adsl1): 2
Port 3 (adsl2): 3
Port 4 (adsl3): 4
Port 5 (adsl4): 5
Port 6 (adsl5): 6
Port 7 (adsl6): 7
Port 8 (adsl7): 8
Port 9 (adsl8): 9
# IGMP Snooping configuration
IGMP Snooping Enabled (unknown-flood)
IGMP Snooping timeout: 300
Module 'snmpr':
Module 'vlan1q':
Module 'sys':
Operation Mode: NORMAL (IEEE 802.1D Transparent Bridging)
Chassis ID is 1
Slot ID is 1
UNIX syslog DISABLED
UNIX syslog facility = local 1
UNIX syslog server = 0.0.0.0
Secured host DISABLED
No secured hosts configured.
Module 'dot1x':
port period 1 3600
port period 2 3600
port period 3 3600
port period 4 3600
port period 5 3600
port period 6 3600
port period 7 3600
port period 8 3600
dot1x feature is disabled
radius ip 192.168.1.254
radius port 1812
radius secret 1234
Module 'dhcprelay':
Module 'adsl':
Line Settings of ADSL Ports:
Port 1: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Enabled
Port 2: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
Port 3: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
Port 4: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
Port 5: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
Port 6: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
Port 7: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
Port 8: Up/Downstream = 512/2048 Kbps, Mode = auto, State = Disabled
VC Profile Settings of ADSL Ports:
Channel Settings of ADSL Ports:
set ch 1 0 32 0 0 DEFVAL
set ch 2 0 33 0 0 DEFVAL
set ch 3 0 33 0 0 DEFVAL
set ch 4 0 33 0 0 DEFVAL
set ch 5 0 33 0 0 DEFVAL
set ch 6 0 33 0 0 DEFVAL
set ch 7 0 33 0 0 DEFVAL
set ch 8 0 33 0 0 DEFVAL
Module 'portcli':
Module 'edd':
The timeout value is 5
The test ip is 192.168.1.1
Module 'ip':
device add ether ether //bridge mtu 1500 221.87.62.170
subnet add ether.home . 221.87.62.0 ff:ff:ff:00
rip send ether 2
rip accept ether 1 2
ipatm lifetime 60
# IP host table:
# Port table:
l2tp 1701/UDP
router 520/UDP
snmp 161/UDP
tftp 69/UDP
telnet 23/TCP
Module 'zy_ether':
Вариант для распечатки
Маршрутизаторы CISCO и др. оборудование. (Public)
(ok) on 31-Окт-06, 11:13 
