НА Cisco 1721 попытался настроить IPSEC. при вводе команд CRYPTO в режиме конфигурации, говорит что вообще не знает таких... Каким образом можно на интерфейс Serial0 повесить Crypto map и настроить ipsec с удаленной cisco? возможно ли на 1721?Вот вывод команд:
r#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(4)YA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Synched to technology version 12.2(5.4)T
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Thu 11-Apr-02 21:54 by ealyon
Image text-base: 0x80008124, data-base: 0x807976DC
ROM: System Bootstrap, Version 12.2(7r)XM1, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-Y-M), Version 12.2(4)YA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
Demiurg_Dm uptime is 1 week, 6 days, 20 hours, 30 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.122-4.YA2.bin"
cisco 1721 (MPC860P) processor (revision 0x100) with 29492K/3276K bytes of memory.
Processor board ID FOC06300MVR (1000488793), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
r(config)#crypto isakmp policy 1
^
% Invalid input detected at '^' marker.
Может я торможу, но вот есть статья как на 1721 настраивать ipsec (http://www.cisco.com/en/US/tech/tk583/tk372/technologies_con...) значит можно???
Заранее спасибо!