Доброго времени суток.Есть Cisco 2811 c CME (flash:c2801-spservicesk9-mz.124-15.T10.bin)
Есть сип транк:
registrar server: login.server.net
login: 56xxxx
password: pwd
Вот часть конфига:
...
...
voice service voip
allow-connections sip to sip
! no supplementary-service sip moved-temporarily
! no supplementary-service sip refer
redirect ip2ip
sip
registrar server expires max 600 min 60
no call service stop
...
...
sip-ua
authentication username 56xxx password 7 0154540456525A realm login.server.net
registrar ipv4:213.186.206.70 expires 3600
sip-server ipv4:213.186.206.70
Не всем могу понять: как мне посмотреть статус рагистрации СМЕ на сервере прова?
и+
voice translation-rule 200
rule 1 /4../ /56xxx/
!
voice translation-profile sip_outbound
translate calling 200
...
...
dial-peer voice 200 voip
description "To SIP trunk"
translation-profile outgoing sip_outbound
destination-pattern 011T
session protocol sipv2
session target sip-server
!
Так я пытаюсь звонить через сип-транк (внутренние номера 401, 402, 410..., 011 - префикс прова для звонков в Россию, США и пр.).
Но при наборе номера (напр., 01173472487386) наблюдается следующее:
Line 1: call failed.
501 Not Implemented
Чего не происходит, если я пропишу данные сип-транка напрямую на телефоне.
Софтфон: Twinkle
Заранее спасибо.
П. С. В этой теме я новичок, так что за ошибки звините :)