>ничего не понятно, нужна схема как все соединено и куда в инет
>пройти.
>
>еще сразу на обоих рутерах:
>#sho cdp neib
>#sho ip int br
>#sho ip route
>#sho ip proto на моей
eka2811#sho cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Local Intrfce Holdtme Capability Platform Port ID
office2960 Fas 0/1/0 166 S I WS-C2960-4Gig 0/2
cisco2811 Fas 0/0 157 R S I 2811 Fas 0/1
cisco2811 Fas 0/1 157 R S I 2811 Fas 0/0
eka2811#sho ip int br
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.xxx.xxx YES manual up up
FastEthernet0/1 2xx.xxx.xxx.xxx YES NVRAM up up
FastEthernet0/1/0 unassigned YES unset up up
FastEthernet0/1/1 unassigned YES unset up up
FastEthernet0/1/2 unassigned YES unset up down
FastEthernet0/1/3 unassigned YES unset up down
Vlan1 unassigned YES NVRAM up up
Vlan20 unassigned YES NVRAM up down
Vlan200 192.168.2.1 YES NVRAM up up
NVI0 unassigned YES unset up up
Tunnel101 192.168.2.1 YES TFTP up up
Tunnel102 192.168.2.1 YES TFTP up up
Tunnel1032 unassigned YES NVRAM up down
eka2811#sho ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route
Gateway of last resort is 217.119.86.129 to network 0.0.0.0
192.168.xxx.0/25 is subnetted, 1 subnets
S 192.168.xxx.0 is directly connected, Tunnel102
2xx.xxx.xxx.0/29 is subnetted, 1 subnets
C 2xx.xxx.xxx.xxx is directly connected, FastEthernet0/1
S 192.168.xxx.0/24 [1/0] via 192.168.xxx.2
S 192.168.3.0/24 is directly connected, Tunnel101
C 192.168.2.0/24 is directly connected, Vlan200
C 192.168.xxx.0/24 is directly connected, FastEthernet0/0
S* 0.0.0.0/0 [1/0] via 2xx.xxx.xxx.xxx
O 192.168.2.0/18 is a summary, 6d20h, Null0
O 192.168.2.0/16 is a summary, 6d07h, Null0
eka2811#sho ip proto
Routing Protocol is "ospf 102"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is 71
Router ID 192.168.xxx.xxx
It is an autonomous system boundary router
Redistributing External Routes from,
ospf 506, includes subnets in redistribution
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Address Summarization:
Maximum path: 4
Routing for Networks:
192.168.xxx.0 0.0.0.255 area 0
Routing Information Sources:
Gateway Distance Last Update
(this router) 110 6d07h
Distance: (default is 110)
Routing Protocol is "ospf 506"
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Router ID 10.16.40.12
It is an autonomous system boundary router
Redistributing External Routes from,
static, includes subnets in redistribution
ospf 102, includes subnets in redistribution
Number of areas in this router is 1. 1 normal 0 stub 0 nssa
Address Summarization:
Maximum path: 4
Routing for Networks:
10.16.40.0 0.0.0.255 area 6
192.168.0.0 0.0.255.255 area 6
Routing Information Sources:
Gateway Distance Last Update
(this router) 110 6d20h
Distance: (default is 110)