Здравствуйте уважаемые.
Проблема в следующем: есть модуль NM-HDV-1E1-30E, туда вставлен однопортовый E1 контроллер. При соединении со станцией на модуле загораются лампочки CD и  AL. Смотрим светодиодом, с кошки нету TX :( Это что? Неисправен модуль? или я что-то не так пишу?
--------------------------------
Cisco36#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-JS-M), Version 12.2(19), RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Tue 12-Aug-03 19:39 by kellmill
Image text-base: 0x60008930, data-base: 0x61454000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)

Cisco36 uptime is 24 minutes
System returned to ROM by reload
System image file is "flash:c3640-js-mz.122-19.bin"

cisco 3640 (R4700) processor (revision 0x00) with 98304K/32768K bytes of memory.
Processor board ID 26858208
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Channelized E1, Version 1.0.
MICA-6DM Firmware: CP ver 2730 - 5/23/2001, SP ver 2730 - 5/23/2001.
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Primary Rate ISDN software, Version 1.1.
4 Ethernet/IEEE 802.3 interface(s)
93 Serial network interface(s)
30 terminal line(s)
3 Channelized E1/PRI port(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Cisco36#sh ru
--- skip ----
!
controller E1 3/0
framing NO-CRC4
pri-group timeslots 1-31
!

Cisco36#sh controllers e1 3/0
E1 3/0 is down.
  Applique type is Channelized E1 - balanced
  Receiver has remote alarm.
  alarm-trigger is not set
  Version info Firmware: 20020306, FPGA: 11
  Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
  Data in current interval (645 seconds elapsed):
     114 Line Code Violations, 2320 Path Code Violations
     0 Slip Secs, 11 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 12 Unavail Secs
  Data in Interval 1:
     2849 Line Code Violations, 20220 Path Code Violations
     0 Slip Secs, 102 Fr Loss Secs, 12 Line Err Secs, 0 Degraded Mins
     11 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 116 Unavail Secs
  Total Data (last 1 15 minute intervals):
     2849 Line Code Violations, 20220 Path Code Violations,
     0 Slip Secs, 102 Fr Loss Secs, 12 Line Err Secs, 0 Degraded Mins,
     11 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 116 Unavail Secs
Cisco36#

Заранее спасибо.

• Проблема с E1 контроллером, ВОЛКА, 15:15 , 17-Дек-03, (1)