The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

gss_add_cred (3)
  • gss_add_cred (3) ( Solaris man: Библиотечные вызовы )
  • >> gss_add_cred (3) ( FreeBSD man: Библиотечные вызовы )

  • BSD mandoc
     

    NAME

    gss_add_cred
    
     - Construct credentials incrementally
    
    
    
     
    

    SYNOPSIS

       #include <gssapi/gssapi.h>
    OM_uint32 Fo gss_add_cred Fa OM_uint32 *minor_status Fa const gss_cred_id_t input_cred_handle Fa const gss_name_t desired_name Fa const gss_OID desired_mech Fa gss_cred_usage_t cred_usage Fa OM_uint32 initiator_time_req Fa OM_uint32 acceptor_time_req Fa gss_cred_id_t *output_cred_handle Fa gss_OID_set *actual_mechs Fa OM_uint32 *initiator_time_rec Fa OM_uint32 *acceptor_time_rec Fc  

    DESCRIPTION

    Adds a credential-element to a credential. The credential-element is identified by the name of the principal to which it refers. GSS-API implementations must impose a local access-control policy on callers of this routine to prevent unauthorized callers from acquiring credential-elements to which they are not entitled. This routine is not intended to provide a "login to the network" function, as such a function would involve the creation of new mechanism-specific authentication data, rather than merely acquiring a GSS-API handle to existing data. Such functions, if required, should be defined in implementation-specific extensions to the API.

    If Fa desired_name is GSS_C_NO_NAME the call is interpreted as a request to add a credential element that will invoke default behavior when passed to gss_init_sec_context ();
    (if cred_usage is GSS_C_INITIATE or GSS_C_BOTH or gss_accept_sec_context ();
    (if Fa cred_usage is GSS_C_ACCEPT or GSS_C_BOTH ).

    This routine is expected to be used primarily by context acceptors, since implementations are likely to provide mechanism-specific ways of obtaining GSS-API initiator credentials from the system login process. Some implementations may therefore not support the acquisition of GSS_C_INITIATE or GSS_C_BOTH credentials via gss_acquire_cred ();
    for any name other than GSS_C_NO_NAME or a name produced by applying either gss_inquire_cred ();
    to a valid credential, or gss_inquire_context ();
    to an active context.

    If credential acquisition is time-consuming for a mechanism, the mechanism may choose to delay the actual acquisition until the credential is required (e.g. by gss_init_sec_context ();
    or gss_accept_sec_context ().);
    Such mechanism-specific implementation decisions should be invisible to the calling application; thus a call of gss_inquire_cred ();
    immediately following the call of gss_add_cred ();
    must return valid credential data, and may therefore incur the overhead of a deferred credential acquisition.

    This routine can be used to either compose a new credential containing all credential-elements of the original in addition to the newly-acquire credential-element, or to add the new credential-element to an existing credential. If NULL is specified for the Fa output_cred_handle parameter argument, the new credential-element will be added to the credential identified by Fa input_cred_handle ; if a valid pointer is specified for the Fa output_cred_handle parameter, a new credential handle will be created.

    If GSS_C_NO_CREDENTIAL is specified as the Fa input_cred_handle , gss_add_cred ();
    will compose a credential (and set the Fa output_cred_handle parameter accordingly) based on default behavior. That is, the call will have the same effect as if the application had first made a call to gss_acquire_cred (,);
    specifying the same usage and passing GSS_C_NO_NAME as the Fa desired_name parameter to obtain an explicit credential handle embodying default behavior, passed this credential handle to gss_add_cred (,);
    and finally called gss_release_cred ();
    on the first credential handle.

    If GSS_C_NO_CREDENTIAL is specified as the Fa input_cred_handle parameter, a non- NULL Fa output_cred_handle must be supplied.  

    PARAMETERS

    minor_status
    Mechanism specific status code.
    input_cred_handle
    The credential to which a credential-element will be added. If GSS_C_NO_CREDENTIAL is specified, the routine will compose the new credential based on default behavior (see description above). Note that, while the credential-handle is not modified by gss_add_cred (,);
    the underlying credential will be modified if Fa output_credential_handle is NULL
    desired_name
    Name of principal whose credential should be acquired.
    desired_mech
    Underlying security mechanism with which the credential may be used.
    cred_usage

    GSS_C_BOTH
    Credential may be used either to initiate or accept security contexts.
    GSS_C_INITIATE
    Credential will only be used to initiate security contexts.
    GSS_C_ACCEPT
    Credential will only be used to accept security contexts.

    initiator_time_req
    Number of seconds that the credential should remain valid for initiating security contexts. This argument is ignored if the composed credentials are of type GSS_C_ACCEPT Specify GSS_C_INDEFINITE to request that the credentials have the maximum permitted initiator lifetime.
    acceptor_time_req
    Number of seconds that the credential should remain valid for accepting security contexts. This argument is ignored if the composed credentials are of type GSS_C_INITIATE Specify GSS_C_INDEFINITE to request that the credentials have the maximum permitted initiator lifetime.
    output_cred_handle
    The returned credential handle, containing the new credential-element and all the credential-elements from Fa input_cred_handle . If a valid pointer to a Fa gss_cred_id_t is supplied for this parameter, gss_add_cred ();
    creates a new credential handle containing all credential-elements from the Fa input_cred_handle and the newly acquired credential-element; if NULL is specified for this parameter, the newly acquired credential-element will be added to the credential identified by Fa input_cred_handle .

    The resources associated with any credential handle returned via this parameter must be released by the application after use with a call to gss_release_cred (.);

    actual_mechs
    The complete set of mechanisms for which the new credential is valid. Storage for the returned OID-set must be freed by the application after use with a call to gss_release_oid_set (.);
    Specify NULL if not required.
    initiator_time_rec
    Actual number of seconds for which the returned credentials will remain valid for initiating contexts using the specified mechanism. If the implementation or mechanism does not support expiration of credentials, the value GSS_C_INDEFINITE will be returned. Specify NULL if not required.
    acceptor_time_rec
    Actual number of seconds for which the returned credentials will remain valid for accepting security contexts using the specified mechanism. If the implementation or mechanism does not support expiration of credentials, the value GSS_C_INDEFINITE will be returned. Specify NULL if not required.

     

    RETURN VALUES

    GSS_S_COMPLETE
    Successful completion.
    GSS_S_BAD_MECH
    Unavailable mechanism requested.
    GSS_S_BAD_NAMETYPE
    Type contained within desired_name parameter is not supported
    GSS_S_BAD_NAME
    Value supplied for desired_name parameter is ill-formed.
    GSS_S_DUPLICATE_ELEMENT
    The credential already contains an element for the requested mechanism with overlapping usage and validity period.
    GSS_S_CREDENTIALS_EXPIRED
    The required credentials could not be added because they have expired.
    GSS_S_NO_CRED
    No credentials were found for the specified name.

     

    SEE ALSO

    gss_init_sec_context3, gss_accept_sec_context3, gss_acquire_cred3, gss_inquire_cred3, gss_inquire_context3, gss_release_cred3, gss_release_oid_set3  

    STANDARDS

    RFC 2743
    Generic Security Service Application Program Interface Version 2, Update 1
    RFC 2744
    Generic Security Service API Version 2 : C-bindings

     

    HISTORY

    The manual page example first appeared in Fx 7.0 .  

    AUTHORS

    John Wray, Iris Associates  

    COPYRIGHT

    Copyright (C) The Internet Society (2000). All Rights Reserved.

    This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English.

    The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns.

    This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    PARAMETERS
    RETURN VALUES
    SEE ALSO
    STANDARDS
    HISTORY
    AUTHORS
    COPYRIGHT


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру