The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

select_tut (2)
  • select_tut (2) ( Русские man: Системные вызовы )
  • >> select_tut (2) ( Linux man: Системные вызовы )
  •  

    NAME

    select, pselect, FD_CLR, FD_ISSET, FD_SET, FD_ZERO -
    synchronous I/O multiplexing
     
    

    SYNOPSIS

    /* According to POSIX.1-2001 */
    
    #include <sys/select.h> /* According to earlier standards */
    #include <sys/time.h>
    #include <sys/types.h>
    #include <unistd.h> int select(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, struct timeval *utimeout); void FD_CLR(int fd, fd_set *set);
    int FD_ISSET(int fd, fd_set *set);
    void FD_SET(int fd, fd_set *set);
    void FD_ZERO(fd_set *set); #include <sys/select.h> int pselect(int nfds, fd_set *readfds, fd_set *writefds, fd_set *exceptfds, const struct timespec *ntimeout, const sigset_t *sigmask);

    Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

    pselect(): _POSIX_C_SOURCE >= 200112L || _XOPEN_SOURCE >= 600  

    DESCRIPTION

    select() (or pselect()) is the pivot function of most C programs that handle more than one simultaneous file descriptor (or socket handle) in an efficient manner. Its principal arguments are three arrays of file descriptors: readfds, writefds, and exceptfds. The way that select() is usually used is to block while waiting for a "change of status" on one or more of the file descriptors. A "change of status" is when more characters become available from the file descriptor, or when space becomes available within the kernel's internal buffers for more to be written to the file descriptor, or when a file descriptor goes into error (in the case of a socket or pipe this is when the other end of the connection is closed).

    In summary, select() just watches multiple file descriptors, and is the standard Unix call to do so.

    The arrays of file descriptors are called file descriptor sets. Each set is declared as type fd_set, and its contents can be altered with the macros FD_CLR(), FD_ISSET(), FD_SET(), and FD_ZERO(). FD_ZERO() is usually the first function to be used on a newly declared set. Thereafter, the individual file descriptors that you are interested in can be added one by one with FD_SET(). select() modifies the contents of the sets according to the rules described below; after calling select() you can test if your file descriptor is still present in the set with the FD_ISSET() macro. FD_ISSET() returns non-zero if the descriptor is present and zero if it is not. FD_CLR() removes a file descriptor from the set.  

    Arguments

    readfds
    This set is watched to see if data is available for reading from any of its file descriptors. After select() has returned, readfds will be cleared of all file descriptors except for those that are immediately available for reading with a recv(2) (for sockets) or read(2) (for pipes, files, and sockets) call.
    writefds
    This set is watched to see if there is space to write data to any of its file descriptors. After select() has returned, writefds will be cleared of all file descriptors except for those that are immediately available for writing with a send(2) (for sockets) or write(2) (for pipes, files, and sockets) call.
    exceptfds
    This set is watched for exceptions or errors on any of the file descriptors. However, that is actually just a rumor. How you use exceptfds is to watch for out-of-band (OOB) data. OOB data is data sent on a socket using the MSG_OOB flag, and hence exceptfds only really applies to sockets. See recv(2) and send(2) about this. After select() has returned, exceptfds will be cleared of all file descriptors except for those that are available for reading OOB data. You can only ever read one byte of OOB data though (which is done with recv(2)), and writing OOB data (done with send(2)) can be done at any time and will not block. Hence there is no need for a fourth set to check if a socket is available for writing OOB data.
    nfds
    This is an integer one more than the maximum of any file descriptor in any of the sets. In other words, while you are busy adding file descriptors to your sets, you must calculate the maximum integer value of all of them, then increment this value by one, and then pass this as nfds to select().
    utimeout
    This is the longest time select() may wait before returning, even if nothing interesting happened. If this value is passed as NULL, then select() blocks indefinitely waiting for an event. utimeout can be set to zero seconds, which causes select() to return immediately. The structure struct timeval is defined as:
    struct timeval {
        time_t tv_sec;    /* seconds */
        long tv_usec;     /* microseconds */
    };
    
    ntimeout
    This argument has the same meaning as utimeout but struct timespec has nanosecond precision as follows:
    struct timespec {
        long tv_sec;    /* seconds */
        long tv_nsec;   /* nanoseconds */
    };
    
    sigmask
    This argument holds a set of signals to allow while performing a pselect() call (see sigaddset(3) and sigprocmask(2)). It can be passed as NULL, in which case it does not modify the set of allowed signals on entry and exit to the function. It will then behave just like select().
     

    Combining Signal and Data Events

    pselect() must be used if you are waiting for a signal as well as data from a file descriptor. Programs that receive signals as events normally use the signal handler only to raise a global flag. The global flag will indicate that the event must be processed in the main loop of the program. A signal will cause the select() (or pselect()) call to return with errno set to EINTR. This behavior is essential so that signals can be processed in the main loop of the program, otherwise select() would block indefinitely. Now, somewhere in the main loop will be a conditional to check the global flag. So we must ask: what if a signal arrives after the conditional, but before the select() call? The answer is that select() would block indefinitely, even though an event is actually pending. This race condition is solved by the pselect() call. This call can be used to mask out signals that are not to be received except within the pselect() call. For instance, let us say that the event in question was the exit of a child process. Before the start of the main loop, we would block SIGCHLD using sigprocmask(2). Our pselect() call would enable SIGCHLD by using the virgin signal mask. Our program would look like:

    int child_events = 0;
    
    void
    child_sig_handler(int x)
    {
        child_events++;
        signal(SIGCHLD, child_sig_handler);
    }
    
    int
    main(int argc, char **argv)
    {
        sigset_t sigmask, orig_sigmask;
    
        sigemptyset(&sigmask);
        sigaddset(&sigmask, SIGCHLD);
        sigprocmask(SIG_BLOCK, &sigmask, &orig_sigmask);
    
        signal(SIGCHLD, child_sig_handler);
    
        for (;;) { /* main loop */
            for (; child_events > 0; child_events--) {
                /* do event work here */
            }
            r = pselect(nfds, &rd, &wr, &er, 0, &orig_sigmask);
    
            /* main body of program */
        }
    }
    
     

    Practical

    So what is the point of select()? Can't I just read and write to my descriptors whenever I want? The point of select() is that it watches multiple descriptors at the same time and properly puts the process to sleep if there is no activity. It does this while enabling you to handle multiple simultaneous pipes and sockets. Unix programmers often find themselves in a position where they have to handle I/O from more than one file descriptor where the data flow may be intermittent. If you were to merely create a sequence of read(2) and write(2) calls, you would find that one of your calls may block waiting for data from/to a file descriptor, while another file descriptor is unused though available for data. select() efficiently copes with this situation.

    A simple example of the use of select() can be found in the select(2) manual page.  

    Select Law

    Many people who try to use select() come across behavior that is difficult to understand and produces non-portable or borderline results. For instance, the above program is carefully written not to block at any point, even though it does not set its file descriptors to non-blocking mode at all (see ioctl(2)). It is easy to introduce subtle errors that will remove the advantage of using select(), hence I will present a list of essentials to watch for when using the select() call.
    1.
    You should always try to use select() without a timeout. Your program should have nothing to do if there is no data available. Code that depends on timeouts is not usually portable and is difficult to debug.
    2.
    The value nfds must be properly calculated for efficiency as explained above.
    3.
    No file descriptor must be added to any set if you do not intend to check its result after the select() call, and respond appropriately. See next rule.
    4.
    After select() returns, all file descriptors in all sets should be checked to see if they are ready.
    5.
    The functions read(2), recv(2), write(2), and send(2) do not necessarily read/write the full amount of data that you have requested. If they do read/write the full amount, it's because you have a low traffic load and a fast stream. This is not always going to be the case. You should cope with the case of your functions only managing to send or receive a single byte.
    6.
    Never read/write only in single bytes at a time unless you are really sure that you have a small amount of data to process. It is extremely inefficient not to read/write as much data as you can buffer each time. The buffers in the example above are 1024 bytes although they could easily be made larger.
    7.
    The functions read(2), recv(2), write(2), and send(2) as well as the select() call can return -1 with errno set to EINTR, or with errno set to EAGAIN (EWOULDBLOCK). These results must be properly managed (not done properly above). If your program is not going to receive any signals, then it is unlikely you will get EINTR. If your program does not set non-blocking I/O, you will not get EAGAIN. Nonetheless you should still cope with these errors for completeness.
    8.
    Never call read(2), recv(2), write(2), or send(2) with a buffer length of zero.
    9.
    If the functions read(2), recv(2), write(2), and send(2) fail with errors other than those listed in 7., or one of the input functions returns 0, indicating end of file, then you should not pass that descriptor to select() again. In the above example, I close the descriptor immediately, and then set it to -1 to prevent it being included in a set.
    10.
    The timeout value must be initialized with each new call to select(), since some operating systems modify the structure. pselect() however does not modify its timeout structure.
    11.
    I have heard that the Windows socket layer does not cope with OOB data properly. It also does not cope with select() calls when no file descriptors are set at all. Having no file descriptors set is a useful way to sleep the process with sub-second precision by using the timeout. (See further on.)
     

    Usleep Emulation

    On systems that do not have a usleep(3) function, you can call select() with a finite timeout and no file descriptors as follows:

        struct timeval tv;
        tv.tv_sec = 0;
        tv.tv_usec = 200000;  /* 0.2 seconds */
        select(0, NULL, NULL, NULL, &tv);
    

    This is only guaranteed to work on Unix systems, however.  

    RETURN VALUE

    On success, select() returns the total number of file descriptors still present in the file descriptor sets.

    If select() timed out, then the return value will be zero. The file descriptors set should be all empty (but may not be on some systems).

    A return value of -1 indicates an error, with errno being set appropriately. In the case of an error, the contents of the returned sets and the struct timeout contents are undefined and should not be used. pselect() however never modifies ntimeout.  

    NOTES

    Generally speaking, all operating systems that support sockets, also support select(). Many types of programs become extremely complicated without the use of select(). select() can be used to solve many problems in a portable and efficient way that naive programmers try to solve in a more complicated manner using threads, forking, IPCs, signals, memory sharing, and so on.

    The poll(2) system call has the same functionality as select(), and is somewhat more efficient when monitoring sparse file descriptor sets. It is nowadays widely available, but historically was less portable than select().

    The Linux-specific epoll(7) API provides an interface that is more efficient than select(2) and poll(2) when monitoring large numbers of file descriptors.  

    EXAMPLE

    Here is an example that better demonstrates the true utility of select(). The listing below is a TCP forwarding program that forwards from one TCP port to another.

    #include <stdlib.h>
    #include <stdio.h>
    #include <unistd.h>
    #include <sys/time.h>
    #include <sys/types.h>
    #include <string.h>
    #include <signal.h>
    #include <sys/socket.h>
    #include <netinet/in.h>
    #include <arpa/inet.h>
    #include <errno.h>
    
    static int forward_port;
    
    #undef max
    #define max(x,y) ((x) > (y) ? (x) : (y))
    
    static int
    listen_socket(int listen_port)
    {
        struct sockaddr_in a;
        int s;
        int yes;
    
        if ((s = socket(AF_INET, SOCK_STREAM, 0)) < 0) {
            perror("socket");
            return -1;
        }
        yes = 1;
        if (setsockopt(s, SOL_SOCKET, SO_REUSEADDR,
                (char *) &yes, sizeof(yes)) < 0) {
            perror("setsockopt");
            close(s);
            return -1;
        }
        memset(&a, 0, sizeof(a));
        a.sin_port = htons(listen_port);
        a.sin_family = AF_INET;
        if (bind(s, (struct sockaddr *) &a, sizeof(a)) < 0) {
            perror("bind");
            close(s);
            return -1;
        }
        printf("accepting connections on port %d\n", listen_port);
        listen(s, 10);
        return s;
    }
    
    static int
    connect_socket(int connect_port, char *address)
    {
        struct sockaddr_in a;
        int s;
    
        if ((s = socket(AF_INET, SOCK_STREAM, 0)) < 0) {
            perror("socket");
            close(s);
            return -1;
        }
    
        memset(&a, 0, sizeof(a));
        a.sin_port = htons(connect_port);
        a.sin_family = AF_INET;
    
        if (!inet_aton(address, (struct in_addr *) &a.sin_addr.s_addr)) {
            perror("bad IP address format");
            close(s);
            return -1;
        }
    
        if (connect(s, (struct sockaddr *) &a, sizeof(a)) < 0) {
            perror("connect()");
            shutdown(s, SHUT_RDWR);
            close(s);
            return -1;
        }
        return s;
    }
    
    #define SHUT_FD1 {                      \
            if (fd1 >= 0) {                 \
                shutdown(fd1, SHUT_RDWR);   \
                close(fd1);                 \
                fd1 = -1;                   \
            }                               \
        }
    
    #define SHUT_FD2 {                      \
            if (fd2 >= 0) {                 \
                shutdown(fd2, SHUT_RDWR);   \
                close(fd2);                 \
                fd2 = -1;                   \
            }                               \
        }
    
    #define BUF_SIZE 1024
    
    int
    main(int argc, char **argv)
    {
        int h;
        int fd1 = -1, fd2 = -1;
        char buf1[BUF_SIZE], buf2[BUF_SIZE];
        int buf1_avail, buf1_written;
        int buf2_avail, buf2_written;
    
        if (argc != 4) {
            fprintf(stderr,
                     "Usage\n\tfwd <listen-port> "
                     "<forward-to-port> <forward-to-ip-address>\n");
            exit(EXIT_FAILURE);
        }
    
        signal(SIGPIPE, SIG_IGN);
    
        forward_port = atoi(argv[2]);
    
        h = listen_socket(atoi(argv[1]));
        if (h < 0)
            exit(EXIT_FAILURE);
    
        for (;;) {
            int r, nfds = 0;
            fd_set rd, wr, er;
            FD_ZERO(&rd);
            FD_ZERO(&wr);
            FD_ZERO(&er);
            FD_SET(h, &rd);
            nfds = max(nfds, h);
            if (fd1 > 0 && buf1_avail < BUF_SIZE) {
                FD_SET(fd1, &rd);
                nfds = max(nfds, fd1);
            }
            if (fd2 > 0 && buf2_avail < BUF_SIZE) {
                FD_SET(fd2, &rd);
                nfds = max(nfds, fd2);
            }
            if (fd1 > 0
                && buf2_avail - buf2_written > 0) {
                FD_SET(fd1, &wr);
                nfds = max(nfds, fd1);
            }
            if (fd2 > 0
                && buf1_avail - buf1_written > 0) {
                FD_SET(fd2, &wr);
                nfds = max(nfds, fd2);
            }
            if (fd1 > 0) {
                FD_SET(fd1, &er);
                nfds = max(nfds, fd1);
            }
            if (fd2 > 0) {
                FD_SET(fd2, &er);
                nfds = max(nfds, fd2);
            }
    
            r = select(nfds + 1, &rd, &wr, &er, NULL);
    
            if (r == -1 && errno == EINTR)
                continue;
            if (r < 0) {
                perror("select()");
                exit(EXIT_FAILURE);
            }
            if (FD_ISSET(h, &rd)) {
                unsigned int l;
                struct sockaddr_in client_address;
                memset(&client_address, 0, l = sizeof(client_address));
                r = accept(h, (struct sockaddr *) &client_address, &l);
                if (r < 0) {
                    perror("accept()");
                } else {
                    SHUT_FD1;
                    SHUT_FD2;
                    buf1_avail = buf1_written = 0;
                    buf2_avail = buf2_written = 0;
                    fd1 = r;
                    fd2 =
                        connect_socket(forward_port, argv[3]);
                    if (fd2 < 0) {
                        SHUT_FD1;
                    } else
                        printf("connect from %s\n",
                                inet_ntoa(client_address.sin_addr));
                }
            }
    /* NB: read oob data before normal reads */
            if (fd1 > 0)
                if (FD_ISSET(fd1, &er)) {
                    char c;
                    errno = 0;
                    r = recv(fd1, &c, 1, MSG_OOB);
                    if (r < 1) {
                        SHUT_FD1;
                    } else
                        send(fd2, &c, 1, MSG_OOB);
                }
            if (fd2 > 0)
                if (FD_ISSET(fd2, &er)) {
                    char c;
                    errno = 0;
                    r = recv(fd2, &c, 1, MSG_OOB);
                    if (r < 1) {
                        SHUT_FD1;
                    } else
                        send(fd1, &c, 1, MSG_OOB);
                }
            if (fd1 > 0)
                if (FD_ISSET(fd1, &rd)) {
                    r =
                        read(fd1, buf1 + buf1_avail,
                              BUF_SIZE - buf1_avail);
                    if (r < 1) {
                        SHUT_FD1;
                    } else
                        buf1_avail += r;
                }
            if (fd2 > 0)
                if (FD_ISSET(fd2, &rd)) {
                    r =
                        read(fd2, buf2 + buf2_avail,
                              BUF_SIZE - buf2_avail);
                    if (r < 1) {
                        SHUT_FD2;
                    } else
                        buf2_avail += r;
                }
            if (fd1 > 0)
                if (FD_ISSET(fd1, &wr)) {
                    r =
                        write(fd1, buf2 + buf2_written,
                               buf2_avail - buf2_written);
                    if (r < 1) {
                        SHUT_FD1;
                    } else
                        buf2_written += r;
                }
            if (fd2 > 0)
                if (FD_ISSET(fd2, &wr)) {
                    r =
                        write(fd2, buf1 + buf1_written,
                               buf1_avail - buf1_written);
                    if (r < 1) {
                        SHUT_FD2;
                    } else
                        buf1_written += r;
                }
    /* check if write data has caught read data */
            if (buf1_written == buf1_avail)
                buf1_written = buf1_avail = 0;
            if (buf2_written == buf2_avail)
                buf2_written = buf2_avail = 0;
    /* one side has closed the connection, keep
       writing to the other side until empty */
            if (fd1 < 0 && buf1_avail - buf1_written == 0) {
                SHUT_FD2;
            }
            if (fd2 < 0 && buf2_avail - buf2_written == 0) {
                SHUT_FD1;
            }
        }
        exit(EXIT_SUCCESS);
    }
    

    The above program properly forwards most kinds of TCP connections including OOB signal data transmitted by telnet servers. It handles the tricky problem of having data flow in both directions simultaneously. You might think it more efficient to use a fork(2) call and devote a thread to each stream. This becomes more tricky than you might suspect. Another idea is to set non-blocking I/O using an ioctl(2) call. This also has its problems because you end up using inefficient timeouts.

    The program does not handle more than one simultaneous connection at a time, although it could easily be extended to do this with a linked list of buffers --- one for each connection. At the moment, new connections cause the current connection to be dropped.  

    SEE ALSO

    accept(2), connect(2), ioctl(2), poll(2), read(2), recv(2), select(2), send(2), sigprocmask(2), write(2), sigaddset(3), sigdelset(3), sigemptyset(3), sigfillset(3), sigismember(3), epoll(7)  

    COLOPHON

    This page is part of release 3.14 of the Linux man-pages project. A description of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/.


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    Arguments
    Combining Signal and Data Events
    Practical
    Select Law
    Usleep Emulation
    RETURN VALUE
    NOTES
    EXAMPLE
    SEE ALSO
    COLOPHON


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру